[v2,01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig

Message ID	20210407020451.924822-2-kashyap.desai@broadcom.com
State	New
Headers	show Return-Path: <linux-scsi-owner@kernel.org> From: Kashyap Desai <kashyap.desai@broadcom.com> To: linux-scsi@vger.kernel.org Cc: Kashyap Desai <kashyap.desai@broadcom.com>, sathya.prakash@broadcom.com Subject: [PATCH v2 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig Date: Wed, 7 Apr 2021 07:34:28 +0530 Message-Id: <20210407020451.924822-2-kashyap.desai@broadcom.com> In-Reply-To: <20210407020451.924822-1-kashyap.desai@broadcom.com> References: <20210407020451.924822-1-kashyap.desai@broadcom.com> Content-Type: multipart/signed; protocol="application/pkcs7-signature"; micalg=sha-256; boundary="000000000000424c1605bf5859d0" Precedence: bulk
Series	Introducing mpi3mr driver \| expand [v2,00/24] Introducing mpi3mr driver [v2,01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig [v2,02/24] mpi3mr: base driver code [v2,03/24] mpi3mr: create operational request and reply queue pair [v2,04/24] mpi3mr: add support of queue command processing [v2,05/24] mpi3mr: add support of internal watchdog thread [v2,06/24] mpi3mr: add support of event handling part-1 [v2,07/24] mpi3mr: add support of event handling pcie devices part-2 [v2,08/24] mpi3mr: add support of event handling part-3 [v2,09/24] mpi3mr: add support for recovering controller [v2,10/24] mpi3mr: add support of timestamp sync with firmware [v2,11/24] mpi3mr: print ioc info for debugging [v2,12/24] mpi3mr: add bios_param shost template hook [v2,13/24] mpi3mr: implement scsi error handler hooks [v2,14/24] mpi3mr: add change queue depth support [v2,15/24] mpi3mr: allow certain commands during pci-remove hook [v2,16/24] mpi3mr: hardware workaround for UNMAP commands to nvme drives [v2,17/24] mpi3mr: add support of threaded isr [v2,18/24] mpi3mr: add complete support of soft reset [v2,19/24] mpi3mr: print pending host ios for debug [v2,20/24] mpi3mr: wait for pending IO completions upon detection of VD IO timeout [v2,21/24] mpi3mr: add support of PM suspend and resume [v2,22/24] mpi3mr: add support of DSN secure fw check [v2,23/24] mpi3mr: add eedp dif dix support [v2,24/24] mpi3mr: add event handling debug prints

Hi Kashyap, Hannes and Bart have commented on the V1 of this set I think they should have been cc-ed, fixing that now. Their objections are still valid. Tomas On 4/7/21 4:04 AM, Kashyap Desai wrote: > This adds the Kconfig and mpi30 headers. > > Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> > Cc: sathya.prakash@broadcom.com > --- > drivers/scsi/Kconfig | 1 + > drivers/scsi/Makefile | 1 + > drivers/scsi/mpi3mr/Kconfig | 7 + > drivers/scsi/mpi3mr/mpi/mpi30_api.h | 21 + > drivers/scsi/mpi3mr/mpi/mpi30_image.h | 285 +++++ > drivers/scsi/mpi3mr/mpi/mpi30_init.h | 216 ++++ > drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 1423 +++++++++++++++++++++ > drivers/scsi/mpi3mr/mpi/mpi30_transport.h | 675 ++++++++++ > drivers/scsi/mpi3mr/mpi/mpi30_type.h | 47 + > 9 files changed, 2676 insertions(+) > create mode 100644 drivers/scsi/mpi3mr/Kconfig > create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_api.h > create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_image.h > create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_init.h > create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_ioc.h > create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_transport.h > create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_type.h > > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > index 06b87c7f6bab..1f06811740a7 100644 > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -482,6 +482,7 @@ config SCSI_ARCMSR > source "drivers/scsi/esas2r/Kconfig" > source "drivers/scsi/megaraid/Kconfig.megaraid" > source "drivers/scsi/mpt3sas/Kconfig" > +source "drivers/scsi/mpi3mr/Kconfig" > source "drivers/scsi/smartpqi/Kconfig" > source "drivers/scsi/ufs/Kconfig" > > diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile > index bc3882f5cc69..06f2d5fab899 100644 > --- a/drivers/scsi/Makefile > +++ b/drivers/scsi/Makefile > @@ -99,6 +99,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o > obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ > obj-$(CONFIG_MEGARAID_SAS) += megaraid/ > obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/ > +obj-$(CONFIG_SCSI_MPI3MR) += mpi3mr/ > obj-$(CONFIG_SCSI_UFSHCD) += ufs/ > obj-$(CONFIG_SCSI_ACARD) += atp870u.o > obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o > diff --git a/drivers/scsi/mpi3mr/Kconfig b/drivers/scsi/mpi3mr/Kconfig > new file mode 100644 > index 000000000000..2d0568dd176a > --- /dev/null > +++ b/drivers/scsi/mpi3mr/Kconfig > @@ -0,0 +1,7 @@ > +# SPDX-License-Identifier: GPL-2.0-or-later > + > +config SCSI_MPI3MR > + tristate "Broadcom MPI3 Storage Controller Device Driver" > + depends on PCI && SCSI > + help > + This driver supports Broadcom's Unified MPI3 based Storage & RAID Controllers. > diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h > new file mode 100644 > index 000000000000..46dd30ccb5f9 > --- /dev/null > +++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h > @@ -0,0 +1,21 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Copyright 2019-2020 Broadcom Inc. All rights reserved. > + * > + * Name: mpi30_api.h > + * Description: Root header that include all other MPI 3.0 headers > + * Developers need to only include this header to gain > + * access to the full MPI3.0 API definitions. > + * Creation Date: 04/15/2019 > + * Version: 03.00.00 > + */ > +#ifndef MPI30_API_H > +#define MPI30_API_H 1 > + > +#include "mpi30_type.h" > +#include "mpi30_transport.h" > +#include "mpi30_image.h" > +#include "mpi30_init.h" > +#include "mpi30_ioc.h" > + > +#endif /* MPI30_API_H */ > diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_image.h b/drivers/scsi/mpi3mr/mpi/mpi30_image.h > new file mode 100644 > index 000000000000..430662d3a43b > --- /dev/null > +++ b/drivers/scsi/mpi3mr/mpi/mpi30_image.h > @@ -0,0 +1,285 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Copyright 2018-2020 Broadcom Inc. All rights reserved. > + * > + * Name: mpi30_image.h > + * Description: Contains definitions for firmware and other component images. > + * Creation Date: 04/02/2018 > + * Version: 03.00.00 > + */ > +#ifndef MPI30_IMAGE_H > +#define MPI30_IMAGE_H 1 > + > +/* Component Image Version */ > +typedef struct _MPI3_COMP_IMAGE_VERSION { > + U16 BuildNum; /* 0x00 */ > + U16 CustomerID; /* 0x02 */ > + U8 PhaseMinor; /* 0x04 */ > + U8 PhaseMajor; /* 0x05 */ > + U8 GenMinor; /* 0x06 */ > + U8 GenMajor; /* 0x07 */ > +} MPI3_COMP_IMAGE_VERSION, MPI3_POINTER PTR_MPI3_COMP_IMAGE_VERSION, > + Mpi3CompImageVersion, MPI3_POINTER pMpi3CompImageVersion; > + > +/* Hash Exclusion Format */ > +typedef struct _MPI3_HASH_EXCLUSION_FORMAT { > + U32 Offset; /* 0x00 */ > + U32 Size; /* 0x04 */ > +} MPI3_HASH_EXCLUSION_FORMAT, MPI3_POINTER PTR_MPI3_HASH_EXCLUSION_FORMAT, > +Mpi3HashSxclusionFormat_t, MPI3_POINTER pMpi3HashExclusionFormat_t; > + > +#define MPI3_IMAGE_HASH_EXCUSION_NUM (4) > + > +/* FW Image Header */ > +typedef struct _MPI3_COMPONENT_IMAGE_HEADER { > + U32 Signature0; /* 0x00 */ > + U32 LoadAddress; /* 0x04 */ > + U32 DataSize; /* 0x08 */ > + U32 StartOffset; /* 0x0C */ > + U32 Signature1; /* 0x10 */ > + U32 FlashOffset; /* 0x14 */ > + U32 ImageSize; /* 0x18 */ > + U32 VersionStringOffset; /* 0x1C */ > + U32 BuildDateStringOffset; /* 0x20 */ > + U32 BuildTimeStringOffset; /* 0x24 */ > + U32 EnvironmentVariableOffset; /* 0x28 */ > + U32 ApplicationSpecific; /* 0x2C */ > + U32 Signature2; /* 0x30 */ > + U32 HeaderSize; /* 0x34 */ > + U32 Crc; /* 0x38 */ > + U32 Flags; /* 0x3C */ > + U32 SecondaryFlashOffset; /* 0x40 */ > + U32 ETPOffset; /* 0x44 */ > + U32 ETPSize; /* 0x48 */ > + MPI3_VERSION_UNION RMCInterfaceVersion; /* 0x4C */ > + MPI3_VERSION_UNION ETPInterfaceVersion; /* 0x50 */ > + MPI3_COMP_IMAGE_VERSION ComponentImageVersion; /* 0x54 */ > + MPI3_HASH_EXCLUSION_FORMAT HashExclusion[MPI3_IMAGE_HASH_EXCUSION_NUM]; /* 0x5C */ > + U32 NextImageHeaderOffset; /* 0x7C */ > + MPI3_VERSION_UNION SecurityVersion; /* 0x80 */ > + U32 Reserved84[31]; /* 0x84 -- 0xFC */ > +} MPI3_COMPONENT_IMAGE_HEADER, MPI3_POINTER PTR_MPI3_COMPONENT_IMAGE_HEADER, > + Mpi3ComponentImageHeader_t, MPI3_POINTER pMpi3ComponentImageHeader_t; > + > + > +/**** Definitions for Signature0 field ****/ > +#define MPI3_IMAGE_HEADER_SIGNATURE0_MPI3 (0xEB00003E) > + > +/**** Definitions for LoadAddress field ****/ > +#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_INVALID (0x00000000) > + > +/**** Definitions for Signature1 field ****/ > +#define MPI3_IMAGE_HEADER_SIGNATURE1_APPLICATION (0x20505041) /* string "APP " */ > +#define MPI3_IMAGE_HEADER_SIGNATURE1_FIRST_MUTABLE (0x20434D46) /* string "FMC " */ > +#define MPI3_IMAGE_HEADER_SIGNATURE1_BSP (0x20505342) /* string "BSP " */ > +#define MPI3_IMAGE_HEADER_SIGNATURE1_ROM_BIOS (0x534F4942) /* string "BIOS" */ > +#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_X64 (0x4D494948) /* string "HIIM" */ > +#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_ARM (0x41494948) /* string "HIIA" */ > +#define MPI3_IMAGE_HEADER_SIGNATURE1_CPLD (0x444C5043) /* string "CPLD" */ > +#define MPI3_IMAGE_HEADER_SIGNATURE1_SPD (0x20445053) /* string "SPD " */ > +#define MPI3_IMAGE_HEADER_SIGNATURE1_GAS_GAUGE (0x20534147) /* string "GAS " */ > +#define MPI3_IMAGE_HEADER_SIGNATURE1_PBLP (0x504C4250) /* string "PBLP" */ > + > +/**** Definitions for Signature2 field ****/ > +#define MPI3_IMAGE_HEADER_SIGNATURE2_VALUE (0x50584546) > + > +/**** Definitions for Flags field ****/ > +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_MASK (0x00000030) > +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_CDI (0x00000000) > +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_DI (0x00000010) > +#define MPI3_IMAGE_HEADER_FLAGS_SIGNED_NVDATA (0x00000008) > +#define MPI3_IMAGE_HEADER_FLAGS_REQUIRES_ACTIVATION (0x00000004) > +#define MPI3_IMAGE_HEADER_FLAGS_COMPRESSED (0x00000002) > +#define MPI3_IMAGE_HEADER_FLAGS_FLASH (0x00000001) > + > + > +/**** Offsets for Image Header Fields ****/ > +#define MPI3_IMAGE_HEADER_SIGNATURE0_OFFSET (0x00) > +#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_OFFSET (0x04) > +#define MPI3_IMAGE_HEADER_DATA_SIZE_OFFSET (0x08) > +#define MPI3_IMAGE_HEADER_START_OFFSET_OFFSET (0x0C) > +#define MPI3_IMAGE_HEADER_SIGNATURE1_OFFSET (0x10) > +#define MPI3_IMAGE_HEADER_FLASH_OFFSET_OFFSET (0x14) > +#define MPI3_IMAGE_HEADER_FLASH_SIZE_OFFSET (0x18) > +#define MPI3_IMAGE_HEADER_VERSION_STRING_OFFSET_OFFSET (0x1C) > +#define MPI3_IMAGE_HEADER_BUILD_DATE_STRING_OFFSET_OFFSET (0x20) > +#define MPI3_IMAGE_HEADER_BUILD_TIME_OFFSET_OFFSET (0x24) > +#define MPI3_IMAGE_HEADER_ENVIROMENT_VAR_OFFSET_OFFSET (0x28) > +#define MPI3_IMAGE_HEADER_APPLICATION_SPECIFIC_OFFSET (0x2C) > +#define MPI3_IMAGE_HEADER_SIGNATURE2_OFFSET (0x30) > +#define MPI3_IMAGE_HEADER_HEADER_SIZE_OFFSET (0x34) > +#define MPI3_IMAGE_HEADER_CRC_OFFSET (0x38) > +#define MPI3_IMAGE_HEADER_FLAGS_OFFSET (0x3C) > +#define MPI3_IMAGE_HEADER_SECONDARY_FLASH_OFFSET_OFFSET (0x40) > +#define MPI3_IMAGE_HEADER_ETP_OFFSET_OFFSET (0x44) > +#define MPI3_IMAGE_HEADER_ETP_SIZE_OFFSET (0x48) > +#define MPI3_IMAGE_HEADER_RMC_INTERFACE_VER_OFFSET (0x4C) > +#define MPI3_IMAGE_HEADER_ETP_INTERFACE_VER_OFFSET (0x50) > +#define MPI3_IMAGE_HEADER_COMPONENT_IMAGE_VER_OFFSET (0x54) > +#define MPI3_IMAGE_HEADER_HASH_EXCLUSION_OFFSET (0x5C) > +#define MPI3_IMAGE_HEADER_NEXT_IMAGE_HEADER_OFFSET_OFFSET (0x7C) > + > + > +#define MPI3_IMAGE_HEADER_SIZE (0x100) > + > + > +/* Extended Image Header */ > +typedef struct _MPI3_EXTENDED_IMAGE_HEADER { > + U8 ImageType; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > + U32 Checksum; /* 0x04 */ > + U32 ImageSize; /* 0x08 */ > + U32 NextImageHeaderOffset; /* 0x0C */ > + U32 Reserved10[4]; /* 0x10 */ > + U32 IdentifyString[8]; /* 0x20 */ > +} MPI3_EXTENDED_IMAGE_HEADER, MPI3_POINTER PTR_MPI3_EXTENDED_IMAGE_HEADER, > + Mpi3ExtendedImageHeader_t, MPI3_POINTER pMpi3ExtendedImageHeader_t; > + > +/* useful offsets */ > +#define MPI3_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) > +#define MPI3_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) > +#define MPI3_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) > + > +#define MPI3_EXT_IMAGE_HEADER_SIZE (0x40) > + > +/* defines for the ImageType field */ > +#define MPI3_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) > +#define MPI3_EXT_IMAGE_TYPE_NVDATA (0x03) > +#define MPI3_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) > +#define MPI3_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09) > +#define MPI3_EXT_IMAGE_TYPE_RDE (0x0A) > +#define MPI3_EXT_IMAGE_TYPE_AUXILIARY_PROCESSOR (0x0B) > +#define MPI3_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) > +#define MPI3_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) > + > + > +/* Supported Device Data Format */ > +typedef struct _MPI3_SUPPORTED_DEVICE { > + U16 DeviceID; /* 0x00 */ > + U16 VendorID; /* 0x02 */ > + U16 DeviceIDMask; /* 0x04 */ > + U16 Reserved06; /* 0x06 */ > + U8 LowPCIRev; /* 0x08 */ > + U8 HighPCIRev; /* 0x09 */ > + U16 Reserved0A; /* 0x0A */ > + U32 Reserved0C; /* 0x0C */ > +} MPI3_SUPPORTED_DEVICE, MPI3_POINTER PTR_MPI3_SUPPORTED_DEVICE, > + Mpi3SupportedDevice_t, MPI3_POINTER pMpi3SupportedDevice_t; > + > +#ifndef MPI3_SUPPORTED_DEVICE_MAX > +#define MPI3_SUPPORTED_DEVICE_MAX (1) > +#endif /* MPI3_SUPPORTED_DEVICE_MAX */ > + > +/* Supported Devices Extended Image Data */ > +typedef struct _MPI3_SUPPORTED_DEVICES_DATA { > + U8 ImageVersion; /* 0x00 */ > + U8 Reserved01; /* 0x01 */ > + U8 NumDevices; /* 0x02 */ > + U8 Reserved03; /* 0x03 */ > + U32 Reserved04; /* 0x04 */ > + MPI3_SUPPORTED_DEVICE SupportedDevice[MPI3_SUPPORTED_DEVICE_MAX]; /* 0x08 */ /* variable length */ > +} MPI3_SUPPORTED_DEVICES_DATA, MPI3_POINTER PTR_MPI3_SUPPORTED_DEVICES_DATA, > + Mpi3SupportedDevicesData_t, MPI3_POINTER pMpi3SupportedDevicesData_t; > + > +#ifndef MPI3_ENCRYPTED_HASH_MAX > +#define MPI3_ENCRYPTED_HASH_MAX (1) > +#endif /* MPI3_ENCRYPTED_HASH_MAX */ > + > +/* Encrypted Hash Entry Format */ > +typedef struct _MPI3_ENCRYPTED_HASH_ENTRY { > + U8 HashImageType; /* 0x00 */ > + U8 HashAlgorithm; /* 0x01 */ > + U8 EncryptionAlgorithm; /* 0x02 */ > + U8 Reserved03; /* 0x03 */ > + U32 Reserved04; /* 0x04 */ > + U32 EncryptedHash[MPI3_ENCRYPTED_HASH_MAX]; /* 0x08 */ /* variable length */ > +} MPI3_ENCRYPTED_HASH_ENTRY, MPI3_POINTER PTR_MPI3_ENCRYPTED_HASH_ENTRY, > + Mpi3EncryptedHashEntry_t, MPI3_POINTER pMpi3EncryptedHashEntry_t; > + > + > +/* defines for the HashImageType field */ > +#define MPI3_HASH_IMAGE_TYPE_KEY_WITH_SIGNATURE (0x03) > + > +/* defines for the HashAlgorithm field */ > +#define MPI3_HASH_ALGORITHM_VERSION_MASK (0xE0) > +#define MPI3_HASH_ALGORITHM_VERSION_NONE (0x00) > +#define MPI3_HASH_ALGORITHM_VERSION_SHA1 (0x20) /* Obsolete */ > +#define MPI3_HASH_ALGORITHM_VERSION_SHA2 (0x40) > +#define MPI3_HASH_ALGORITHM_VERSION_SHA3 (0x60) > + > +#define MPI3_HASH_ALGORITHM_SIZE_MASK (0x1F) > +#define MPI3_HASH_ALGORITHM_SIZE_UNUSED (0x00) > +#define MPI3_HASH_ALGORITHM_SIZE_SHA256 (0x01) > +#define MPI3_HASH_ALGORITHM_SIZE_SHA512 (0x02) > + > +/* defines for the EncryptionAlgorithm field */ > +#define MPI3_ENCRYPTION_ALGORITHM_UNUSED (0x00) > +#define MPI3_ENCRYPTION_ALGORITHM_RSA256 (0x01) /* Obsolete */ > +#define MPI3_ENCRYPTION_ALGORITHM_RSA512 (0x02) /* Obsolete */ > +#define MPI3_ENCRYPTION_ALGORITHM_RSA1024 (0x03) /* Obsolete */ > +#define MPI3_ENCRYPTION_ALGORITHM_RSA2048 (0x04) > +#define MPI3_ENCRYPTION_ALGORITHM_RSA4096 (0x05) > +#define MPI3_ENCRYPTION_ALGORITHM_RSA3072 (0x06) > + > + > +#ifndef MPI3_PUBLIC_KEY_MAX > +#define MPI3_PUBLIC_KEY_MAX (1) > +#endif /* MPI3_PUBLIC_KEY_MAX */ > + > +/* Encrypted Key with Hash Entry Format */ > +typedef struct _MPI3_ENCRYPTED_KEY_WITH_HASH_ENTRY { > + U8 HashImageType; /* 0x00 */ > + U8 HashAlgorithm; /* 0x01 */ > + U8 EncryptionAlgorithm; /* 0x02 */ > + U8 Reserved03; /* 0x03 */ > + U32 Reserved04; /* 0x04 */ > + U32 PublicKey[MPI3_PUBLIC_KEY_MAX]; /* 0x08 */ /* variable length */ > + U32 EncryptedHash[MPI3_ENCRYPTED_HASH_MAX]; /* 0x0C */ /* variable length */ > +} MPI3_ENCRYPTED_KEY_WITH_HASH_ENTRY, MPI3_POINTER PTR_MPI3_ENCRYPTED_KEY_WITH_HASH_ENTRY, > + Mpi3EncryptedKeyWithHashEntry_t, MPI3_POINTER pMpi3EncryptedKeyWithHashEntry_t; > + > +#ifndef MPI3_ENCRYPTED_HASH_ENTRY_MAX > +#define MPI3_ENCRYPTED_HASH_ENTRY_MAX (1) > +#endif /* MPI3_ENCRYPTED_HASH_ENTRY_MAX */ > + > +/* Encrypted Hash Image Data */ > +typedef struct _MPI3_ENCRYPTED_HASH_DATA { > + U8 ImageVersion; /* 0x00 */ > + U8 NumHash; /* 0x01 */ > + U16 Reserved02; /* 0x02 */ > + U32 Reserved04; /* 0x04 */ > + MPI3_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[MPI3_ENCRYPTED_HASH_ENTRY_MAX]; /* 0x08 */ /* variable length */ > +} MPI3_ENCRYPTED_HASH_DATA, MPI3_POINTER PTR_MPI3_ENCRYPTED_HASH_DATA, > + Mpi3EncryptedHashData_t, MPI3_POINTER pMpi3EncryptedHashData_t; > + > + > +#ifndef MPI3_AUX_PROC_DATA_MAX > +#define MPI3_AUX_PROC_DATA_MAX (1) > +#endif /* MPI3_ENCRYPTED_HASH_ENTRY_MAX */ > + > +/* Auxiliary Processor Extended Image Data */ > +typedef struct _MPI3_AUX_PROCESSOR_DATA { > + U8 BootMethod; /* 0x00 */ > + U8 NumLoadAddr; /* 0x01 */ > + U8 Reserved02; /* 0x02 */ > + U8 Type; /* 0x03 */ > + U32 Version; /* 0x04 */ > + U32 LoadAddress[8]; /* 0x08 */ > + U32 Reserved28[22]; /* 0x28 */ > + U32 AuxProcessorData[MPI3_AUX_PROC_DATA_MAX]; /* 0x80 */ /* variable length */ > +} MPI3_AUX_PROCESSOR_DATA, MPI3_POINTER PTR_MPI3_AUX_PROCESSOR_DATA, > + Mpi3AuxProcessorData_t, MPI3_POINTER pMpi3AuxProcessorData_t; > + > +#define MPI3_AUX_PROC_DATA_OFFSET (0x80) > + > +/* defines for the BootMethod field */ > +#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_MSG (0x00) > +#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_DOORBELL (0x01) > +#define MPI3_AUXPROCESSOR_BOOT_METHOD_COMPONENT (0x02) > + > +/* defines for the Type field */ > +#define MPI3_AUXPROCESSOR_TYPE_ARM_A15 (0x00) > +#define MPI3_AUXPROCESSOR_TYPE_ARM_M0 (0x01) > +#define MPI3_AUXPROCESSOR_TYPE_ARM_R4 (0x02) > + > +#endif /* MPI30_IMAGE_H */ > diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_init.h b/drivers/scsi/mpi3mr/mpi/mpi30_init.h > new file mode 100644 > index 000000000000..a0222f0fc9a8 > --- /dev/null > +++ b/drivers/scsi/mpi3mr/mpi/mpi30_init.h > @@ -0,0 +1,216 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Copyright 2016-2020 Broadcom Inc. All rights reserved. > + * > + * Name: mpi30_init.h > + * Description: Contains definitions for SCSI initiator mode messages and structures. > + * Creation Date: 10/27/2016 > + * Version: 03.00.00 > + */ > +#ifndef MPI30_INIT_H > +#define MPI30_INIT_H 1 > + > +/***************************************************************************** > + * SCSI Initiator Messages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * SCSI IO Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_SCSI_IO_CDB_EEDP32 { > + U8 CDB[20]; /* 0x00 */ > + __be32 PrimaryReferenceTag; /* 0x14 */ > + U16 PrimaryApplicationTag; /* 0x18 */ > + U16 PrimaryApplicationTagMask; /* 0x1A */ > + U32 TransferLength; /* 0x1C */ > +} MPI3_SCSI_IO_CDB_EEDP32, MPI3_POINTER PTR_MPI3_SCSI_IO_CDB_EEDP32, > + Mpi3ScsiIoCdbEedp32_t, MPI3_POINTER pMpi3ScsiIoCdbEedp32_t; > + > +typedef union _MPI3_SCSO_IO_CDB_UNION { > + U8 CDB32[32]; > + MPI3_SCSI_IO_CDB_EEDP32 EEDP32; > + MPI3_SGE_SIMPLE SGE; > +} MPI3_SCSO_IO_CDB_UNION, MPI3_POINTER PTR_MPI3_SCSO_IO_CDB_UNION, > + Mpi3ScsiIoCdb_t, MPI3_POINTER pMpi3ScsiIoCdb_t; > + > +typedef struct _MPI3_SCSI_IO_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 DevHandle; /* 0x0A */ > + U32 Flags; /* 0x0C */ > + U32 SkipCount; /* 0x10 */ > + U32 DataLength; /* 0x14 */ > + U8 LUN[8]; /* 0x18 */ > + MPI3_SCSO_IO_CDB_UNION CDB; /* 0x20 */ > + MPI3_SGE_UNION SGL[4]; /* 0x40 */ > +} MPI3_SCSI_IO_REQUEST, MPI3_POINTER PTR_MPI3_SCSI_IO_REQUEST, > + Mpi3SCSIIORequest_t, MPI3_POINTER pMpi3SCSIIORequest_t; > + > +/**** Defines for the MsgFlags field ****/ > +#define MPI3_SCSIIO_MSGFLAGS_METASGL_VALID (0x80) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_SCSIIO_FLAGS_LARGE_CDB (0x60000000) > +#define MPI3_SCSIIO_FLAGS_CDB_16_OR_LESS (0x00000000) > +#define MPI3_SCSIIO_FLAGS_CDB_GREATER_THAN_16 (0x20000000) > +#define MPI3_SCSIIO_FLAGS_CDB_IN_SEPARATE_BUFFER (0x40000000) > +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_MASK (0x07000000) > +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_SIMPLEQ (0x00000000) > +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_HEADOFQ (0x01000000) > +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ORDEREDQ (0x02000000) > +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ACAQ (0x04000000) > +#define MPI3_SCSIIO_FLAGS_CMDPRI_MASK (0x00F00000) > +#define MPI3_SCSIIO_FLAGS_CMDPRI_SHIFT (20) > +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_MASK (0x000C0000) > +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_NO_DATA_TRANSFER (0x00000000) > +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_WRITE (0x00040000) > +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_READ (0x00080000) > +#define MPI3_SCSIIO_FLAGS_DMAOPERATION_MASK (0x00030000) > +#define MPI3_SCSIIO_FLAGS_DMAOPERATION_HOST_PI (0x00010000) > + > +/**** Defines for the SGL field ****/ > +#define MPI3_SCSIIO_METASGL_INDEX (3) > + > +/***************************************************************************** > + * SCSI IO Error Reply Message * > + ****************************************************************************/ > +typedef struct _MPI3_SCSI_IO_REPLY { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 IOCUseOnly08; /* 0x08 */ > + U16 IOCStatus; /* 0x0A */ > + U32 IOCLogInfo; /* 0x0C */ > + U8 SCSIStatus; /* 0x10 */ > + U8 SCSIState; /* 0x11 */ > + U16 DevHandle; /* 0x12 */ > + U32 TransferCount; /* 0x14 */ > + U32 SenseCount; /* 0x18 */ > + U32 ResponseData; /* 0x1C */ > + U16 TaskTag; /* 0x20 */ > + U16 SCSIStatusQualifier; /* 0x22 */ > + U32 EEDPErrorOffset; /* 0x24 */ > + U16 EEDPObservedAppTag; /* 0x28 */ > + U16 EEDPObservedGuard; /* 0x2A */ > + U32 EEDPObservedRefTag; /* 0x2C */ > + U64 SenseDataBufferAddress; /* 0x30 */ > +} MPI3_SCSI_IO_REPLY, MPI3_POINTER PTR_MPI3_SCSI_IO_REPLY, > + Mpi3SCSIIOReply_t, MPI3_POINTER pMpi3SCSIIOReply_t; > + > +/**** Defines for the MsgFlags field ****/ > +#define MPI3_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01) > +#define MPI3_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x02) > +#define MPI3_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x04) > + > +/**** Defines for the SCSIStatus field ****/ > +#define MPI3_SCSI_STATUS_GOOD (0x00) > +#define MPI3_SCSI_STATUS_CHECK_CONDITION (0x02) > +#define MPI3_SCSI_STATUS_CONDITION_MET (0x04) > +#define MPI3_SCSI_STATUS_BUSY (0x08) > +#define MPI3_SCSI_STATUS_INTERMEDIATE (0x10) > +#define MPI3_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) > +#define MPI3_SCSI_STATUS_RESERVATION_CONFLICT (0x18) > +#define MPI3_SCSI_STATUS_COMMAND_TERMINATED (0x22) > +#define MPI3_SCSI_STATUS_TASK_SET_FULL (0x28) > +#define MPI3_SCSI_STATUS_ACA_ACTIVE (0x30) > +#define MPI3_SCSI_STATUS_TASK_ABORTED (0x40) > + > +/**** Defines for the SCSIState field ****/ > +#define MPI3_SCSI_STATE_SENSE_MASK (0x03) > +#define MPI3_SCSI_STATE_SENSE_VALID (0x00) > +#define MPI3_SCSI_STATE_SENSE_FAILED (0x01) > +#define MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY (0x02) > +#define MPI3_SCSI_STATE_SENSE_NOT_AVAILABLE (0x03) > +#define MPI3_SCSI_STATE_NO_SCSI_STATUS (0x04) > +#define MPI3_SCSI_STATE_TERMINATED (0x08) > +#define MPI3_SCSI_STATE_RESPONSE_DATA_VALID (0x10) > + > +/**** Defines for the ResponseData field ****/ > +#define MPI3_SCSI_RSP_RESPONSECODE_MASK (0x000000FF) > +#define MPI3_SCSI_RSP_RESPONSECODE_SHIFT (0) > +#define MPI3_SCSI_RSP_ARI2_MASK (0x0000FF00) > +#define MPI3_SCSI_RSP_ARI2_SHIFT (8) > +#define MPI3_SCSI_RSP_ARI1_MASK (0x00FF0000) > +#define MPI3_SCSI_RSP_ARI1_SHIFT (16) > +#define MPI3_SCSI_RSP_ARI0_MASK (0xFF000000) > +#define MPI3_SCSI_RSP_ARI0_SHIFT (24) > + > +/**** Defines for the TaskTag field ****/ > +#define MPI3_SCSI_TASKTAG_UNKNOWN (0xFFFF) > + > + > +/***************************************************************************** > + * SCSI Task Management Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_SCSI_TASK_MGMT_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 DevHandle; /* 0x0A */ > + U16 TaskHostTag; /* 0x0C */ > + U8 TaskType; /* 0x0E */ > + U8 Reserved0F; /* 0x0F */ > + U16 TaskRequestQueueID; /* 0x10 */ > + U16 Reserved12; /* 0x12 */ > + U32 Reserved14; /* 0x14 */ > + U8 LUN[8]; /* 0x18 */ > +} MPI3_SCSI_TASK_MGMT_REQUEST, MPI3_POINTER PTR_MPI3_SCSI_TASK_MGMT_REQUEST, > + Mpi3SCSITaskMgmtRequest_t, MPI3_POINTER pMpi3SCSITaskMgmtRequest_t; > + > +/**** Defines for the MsgFlags field ****/ > +#define MPI3_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x08) > + > +/**** Defines for the TaskType field ****/ > +#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) > +#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK_SET (0x02) > +#define MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) > +#define MPI3_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) > +#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) > +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) > +#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08) > +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK_SET (0x09) > +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_ASYNC_EVENT (0x0A) > +#define MPI3_SCSITASKMGMT_TASKTYPE_I_T_NEXUS_RESET (0x0B) > + > + > +/***************************************************************************** > + * SCSI Task Management Reply Message * > + ****************************************************************************/ > +typedef struct _MPI3_SCSI_TASK_MGMT_REPLY { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 IOCUseOnly08; /* 0x08 */ > + U16 IOCStatus; /* 0x0A */ > + U32 IOCLogInfo; /* 0x0C */ > + U32 TerminationCount; /* 0x10 */ > + U32 ResponseData; /* 0x14 */ > + U32 Reserved18; /* 0x18 */ > +} MPI3_SCSI_TASK_MGMT_REPLY, MPI3_POINTER PTR_MPI3_SCSI_TASK_MGMT_REPLY, > + Mpi3SCSITaskMgmtReply_t, MPI3_POINTER pMpi3SCSITaskMgmtReply_t; > + > +/**** Defines for the ResponseData field - use MPI3_SCSI_RSP_ defines ****/ > +/* > + * Values for the ResponseCode (byte 0 of ResponseData) is normally obtained > + * from the SSP Response frame. A value of 0x80 may be returned by the IOC > + * for a TaskType of Query Task indicating the specified TaskHostTag I/O is > + * currently queued on the IOC and has not been sent to the target device yet. > + */ > +#define MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC (0x80) > + > +#endif /* MPI30_INIT_H */ > diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h > new file mode 100644 > index 000000000000..880d717000f6 > --- /dev/null > +++ b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h > @@ -0,0 +1,1423 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Copyright 2016-2020 Broadcom Inc. All rights reserved. > + * > + * Name: mpi30_ioc.h > + * Description: Contains definitions for IOC messages such as IOC Init, IOC Facts, Port Enable, > + * Events, FW Download, and FW Upload. > + * Creation Date: 10/24/2016 > + * Version: 03.00.00 > + */ > +#ifndef MPI30_IOC_H > +#define MPI30_IOC_H 1 > + > +/***************************************************************************** > + * IOC Messages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * IOCInit Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_IOC_INIT_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + MPI3_VERSION_UNION MPIVersion; /* 0x0C */ > + U64 TimeStamp; /* 0x10 */ > + U8 Reserved18; /* 0x18 */ > + U8 WhoInit; /* 0x19 */ > + U16 Reserved1A; /* 0x1A */ > + U16 ReplyFreeQueueDepth; /* 0x1C */ > + U16 Reserved1E; /* 0x1E */ > + U64 ReplyFreeQueueAddress; /* 0x20 */ > + U32 Reserved28; /* 0x28 */ > + U16 SenseBufferFreeQueueDepth; /* 0x2C */ > + U16 SenseBufferLength; /* 0x2E */ > + U64 SenseBufferFreeQueueAddress; /* 0x30 */ > + U64 DriverInformationAddress; /* 0x38 */ > +} MPI3_IOC_INIT_REQUEST, MPI3_POINTER PTR_MPI3_IOC_INIT_REQUEST, > + Mpi3IOCInitRequest_t, MPI3_POINTER pMpi3IOCInitRequest_t; > + > + > +/**** Defines for the WhoInit field ****/ > +#define MPI3_WHOINIT_NOT_INITIALIZED (0x00) > +#define MPI3_WHOINIT_ROM_BIOS (0x02) > +#define MPI3_WHOINIT_HOST_DRIVER (0x03) > +#define MPI3_WHOINIT_MANUFACTURER (0x04) > + > +/**** Defines for the DriverInformationAddress field */ > +typedef struct _MPI3_DRIVER_INFO_LAYOUT { > + U32 InformationLength; /* 0x00 */ > + U8 DriverSignature[12]; /* 0x04 */ > + U8 OsName[16]; /* 0x10 */ > + U8 OsVersion[12]; /* 0x20 */ > + U8 DriverName[20]; /* 0x2C */ > + U8 DriverVersion[32]; /* 0x40 */ > + U8 DriverReleaseDate[20]; /* 0x60 */ > + U32 DriverCapabilities; /* 0x74 */ > +} MPI3_DRIVER_INFO_LAYOUT, MPI3_POINTER PTR_MPI3_DRIVER_INFO_LAYOUT, > + Mpi3DriverInfoLayout_t, MPI3_POINTER pMpi3DriverInfoLayout_t; > + > +/***************************************************************************** > + * IOCFacts Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_IOC_FACTS_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U32 Reserved0C; /* 0x0C */ > + MPI3_SGE_UNION SGL; /* 0x10 */ > +} MPI3_IOC_FACTS_REQUEST, MPI3_POINTER PTR_MPI3_IOC_FACTS_REQUEST, > + Mpi3IOCFactsRequest_t, MPI3_POINTER pMpi3IOCFactsRequest_t; > + > +/***************************************************************************** > + * IOCFacts Data * > + ****************************************************************************/ > +typedef struct _MPI3_IOC_FACTS_DATA { > + U16 IOCFactsDataLength; /* 0x00 */ > + U16 Reserved02; /* 0x02 */ > + MPI3_VERSION_UNION MPIVersion; /* 0x04 */ > + MPI3_COMP_IMAGE_VERSION FWVersion; /* 0x08 */ > + U32 IOCCapabilities; /* 0x10 */ > + U8 IOCNumber; /* 0x14 */ > + U8 WhoInit; /* 0x15 */ > + U16 MaxMSIxVectors; /* 0x16 */ > + U16 MaxOutstandingRequest; /* 0x18 */ > + U16 ProductID; /* 0x1A */ > + U16 IOCRequestFrameSize; /* 0x1C */ > + U16 ReplyFrameSize; /* 0x1E */ > + U16 IOCExceptions; /* 0x20 */ > + U16 MaxPersistentID; /* 0x22 */ > + U8 SGEModifierMask; /* 0x24 */ > + U8 SGEModifierValue; /* 0x25 */ > + U8 SGEModifierShift; /* 0x26 */ > + U8 ProtocolFlags; /* 0x27 */ > + U16 MaxSASInitiators; /* 0x28 */ > + U16 MaxSASTargets; /* 0x2A */ > + U16 MaxSASExpanders; /* 0x2C */ > + U16 MaxEnclosures; /* 0x2E */ > + U16 MinDevHandle; /* 0x30 */ > + U16 MaxDevHandle; /* 0x32 */ > + U16 MaxPCIeSwitches; /* 0x34 */ > + U16 MaxNVMe; /* 0x36 */ > + U16 MaxPDs; /* 0x38 */ > + U16 MaxVDs; /* 0x3A */ > + U16 MaxHostPDs; /* 0x3C */ > + U16 MaxAdvancedHostPDs; /* 0x3E */ > + U16 MaxRAIDPDs; /* 0x40 */ > + U16 MaxPostedCmdBuffers; /* 0x42 */ > + U32 Flags; /* 0x44 */ > + U16 MaxOperationalRequestQueues; /* 0x48 */ > + U16 MaxOperationalReplyQueues; /* 0x4A */ > + U16 ShutdownTimeout; /* 0x4C */ > + U16 Reserved4E; /* 0x4E */ > + U32 DiagTraceSize; /* 0x50 */ > + U32 DiagFwSize; /* 0x54 */ > +} MPI3_IOC_FACTS_DATA, MPI3_POINTER PTR_MPI3_IOC_FACTS_DATA, > + Mpi3IOCFactsData_t, MPI3_POINTER pMpi3IOCFactsData_t; > + > +/**** Defines for the IOCCapabilities field ****/ > +#define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD (0x00000010) > +#define MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE (0x00000008) > +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_GRAN_MASK (0x00000001) > +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_IOC_GRAN (0x00000000) > +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_REPLY_Q_GRAN (0x00000001) > + > +/**** WhoInit values are defined under IOCInit Request Message definition ****/ > + > +/**** Defines for the ProductID field ****/ > +#define MPI3_IOCFACTS_PID_TYPE_MASK (0xF000) > +#define MPI3_IOCFACTS_PID_TYPE_SHIFT (12) > +#define MPI3_IOCFACTS_PID_PRODUCT_MASK (0x0F00) > +#define MPI3_IOCFACTS_PID_PRODUCT_SHIFT (8) > +#define MPI3_IOCFACTS_PID_FAMILY_MASK (0x00FF) > +#define MPI3_IOCFACTS_PID_FAMILY_SHIFT (0) > + > +/**** Defines for the IOCExceptions field ****/ > +#define MPI3_IOCFACTS_EXCEPT_SAFE_MODE (0x0800) > +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_MASK (0x0700) > +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_NONE (0x0000) > +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_RAID (0x0100) > +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_OOB (0x0200) > +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_RAID (0x0300) > +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_OOB (0x0400) > +#define MPI3_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0080) > +#define MPI3_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0040) > +#define MPI3_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0020) > +#define MPI3_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0010) > +#define MPI3_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0008) > +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x0001) > +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_PRIMARY (0x0000) > +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_SECONDARY (0x0001) > + > +/**** Defines for the ProtocolFlags field ****/ > +#define MPI3_IOCFACTS_PROTOCOL_SAS (0x0010) > +#define MPI3_IOCFACTS_PROTOCOL_SATA (0x0008) > +#define MPI3_IOCFACTS_PROTOCOL_NVME (0x0004) > +#define MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) > +#define MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_IOCFACTS_FLAGS_SIGNED_NVDATA_REQUIRED (0x00010000) > +#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK (0x0000FF00) > +#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT (8) > +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK (0x00000030) > +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_NOT_STARTED (0x00000000) > +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_IN_PROGRESS (0x00000010) > +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_COMPLETE (0x00000020) > +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK (0x0000000F) > +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA (0x00000000) > +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR (0x00000002) > + > + > +/***************************************************************************** > + * Management Passthrough Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_MGMT_PASSTHROUGH_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U32 Reserved0C[5]; /* 0x0C */ > + MPI3_SGE_UNION CommandSGL; /* 0x20 */ > + MPI3_SGE_UNION ResponseSGL; /* 0x30 */ > +} MPI3_MGMT_PASSTHROUGH_REQUEST, MPI3_POINTER PTR_MPI3_MGMT_PASSTHROUGH_REQUEST, > + Mpi3MgmtPassthroughRequest_t, MPI3_POINTER pMpi3MgmtPassthroughRequest_t; > + > +/***************************************************************************** > + * CreateRequestQueue Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_CREATE_REQUEST_QUEUE_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Flags; /* 0x0A */ > + U8 Burst; /* 0x0B */ > + U16 Size; /* 0x0C */ > + U16 QueueID; /* 0x0E */ > + U16 ReplyQueueID; /* 0x10 */ > + U16 Reserved12; /* 0x12 */ > + U32 Reserved14; /* 0x14 */ > + U64 BaseAddress; /* 0x18 */ > +} MPI3_CREATE_REQUEST_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_CREATE_REQUEST_QUEUE_REQUEST, > + Mpi3CreateRequestQueueRequest_t, MPI3_POINTER pMpi3CreateRequestQueueRequest_t; > + > +/**** Defines for the Flags field ****/ > +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_MASK (0x80) > +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80) > +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00) > + > + > +/***************************************************************************** > + * DeleteRequestQueue Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_DELETE_REQUEST_QUEUE_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 QueueID; /* 0x0A */ > +} MPI3_DELETE_REQUEST_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_DELETE_REQUEST_QUEUE_REQUEST, > + Mpi3DeleteRequestQueueRequest_t, MPI3_POINTER pMpi3DeleteRequestQueueRequest_t; > + > + > +/***************************************************************************** > + * CreateReplyQueue Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_CREATE_REPLY_QUEUE_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Flags; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U16 Size; /* 0x0C */ > + U16 QueueID; /* 0x0E */ > + U16 MSIxIndex; /* 0x10 */ > + U16 Reserved12; /* 0x12 */ > + U32 Reserved14; /* 0x14 */ > + U64 BaseAddress; /* 0x18 */ > +} MPI3_CREATE_REPLY_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_CREATE_REPLY_QUEUE_REQUEST, > + Mpi3CreateReplyQueueRequest_t, MPI3_POINTER pMpi3CreateReplyQueueRequest_t; > + > +/**** Defines for the Flags field ****/ > +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_MASK (0x80) > +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80) > +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00) > +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_MASK (0x01) > +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_DISABLE (0x00) > +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE (0x01) > + > + > +/***************************************************************************** > + * DeleteReplyQueue Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_DELETE_REPLY_QUEUE_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 QueueID; /* 0x0A */ > +} MPI3_DELETE_REPLY_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_DELETE_REPLY_QUEUE_REQUEST, > + Mpi3DeleteReplyQueueRequest_t, MPI3_POINTER pMpi3DeleteReplyQueueRequest_t; > + > + > +/***************************************************************************** > + * PortEnable Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_PORT_ENABLE_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > +} MPI3_PORT_ENABLE_REQUEST, MPI3_POINTER PTR_MPI3_PORT_ENABLE_REQUEST, > + Mpi3PortEnableRequest_t, MPI3_POINTER pMpi3PortEnableRequest_t; > + > + > +/***************************************************************************** > + * IOC Events and Event Management * > + ****************************************************************************/ > +#define MPI3_EVENT_LOG_DATA (0x01) > +#define MPI3_EVENT_CHANGE (0x02) > +#define MPI3_EVENT_GPIO_INTERRUPT (0x04) > +#define MPI3_EVENT_TEMP_THRESHOLD (0x05) > +#define MPI3_EVENT_CABLE_MGMT (0x06) > +#define MPI3_EVENT_DEVICE_ADDED (0x07) > +#define MPI3_EVENT_DEVICE_INFO_CHANGED (0x08) > +#define MPI3_EVENT_PREPARE_FOR_RESET (0x09) > +#define MPI3_EVENT_COMP_IMAGE_ACT_START (0x0A) > +#define MPI3_EVENT_ENCL_DEVICE_ADDED (0x0B) > +#define MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x0C) > +#define MPI3_EVENT_DEVICE_STATUS_CHANGE (0x0D) > +#define MPI3_EVENT_ENERGY_PACK_CHANGE (0x0E) > +#define MPI3_EVENT_SAS_DISCOVERY (0x11) > +#define MPI3_EVENT_SAS_BROADCAST_PRIMITIVE (0x12) > +#define MPI3_EVENT_SAS_NOTIFY_PRIMITIVE (0x13) > +#define MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x14) > +#define MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW (0x15) > +#define MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x16) > +#define MPI3_EVENT_SAS_PHY_COUNTER (0x18) > +#define MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x19) > +#define MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x20) > +#define MPI3_EVENT_PCIE_ENUMERATION (0x22) > +#define MPI3_EVENT_HARD_RESET_RECEIVED (0x40) > +#define MPI3_EVENT_MIN_PRODUCT_SPECIFIC (0x60) > +#define MPI3_EVENT_MAX_PRODUCT_SPECIFIC (0x7F) > + > + > +/***************************************************************************** > + * Event Notification Request Message * > + ****************************************************************************/ > +#define MPI3_EVENT_NOTIFY_EVENTMASK_WORDS (4) > + > +typedef struct _MPI3_EVENT_NOTIFICATION_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U16 SASBroadcastPrimitiveMasks; /* 0x0C */ > + U16 SASNotifyPrimitiveMasks; /* 0x0E */ > + U32 EventMasks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS]; /* 0x10 */ > +} MPI3_EVENT_NOTIFICATION_REQUEST, MPI3_POINTER PTR_MPI3_EVENT_NOTIFICATION_REQUEST, > + Mpi3EventNotificationRequest_t, MPI3_POINTER pMpi3EventNotificationRequest_t; > + > +/**** Defines for the SASBroadcastPrimitiveMasks field - use MPI3_EVENT_PRIMITIVE_ values ****/ > + > +/**** Defines for the SASNotifyPrimitiveMasks field - use MPI3_EVENT_NOTIFY_ values ****/ > + > +/**** Defines for the EventMasks field - use MPI3_EVENT_ values ****/ > + > +/***************************************************************************** > + * Event Notification Reply Message * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_NOTIFICATION_REPLY { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 IOCUseOnly08; /* 0x08 */ > + U16 IOCStatus; /* 0x0A */ > + U32 IOCLogInfo; /* 0x0C */ > + U8 EventDataLength; /* 0x10 */ > + U8 Event; /* 0x11 */ > + U16 IOCChangeCount; /* 0x12 */ > + U32 EventContext; /* 0x14 */ > + U32 EventData[1]; /* 0x18 */ > +} MPI3_EVENT_NOTIFICATION_REPLY, MPI3_POINTER PTR_MPI3_EVENT_NOTIFICATION_REPLY, > + Mpi3EventNotificationReply_t, MPI3_POINTER pMpi3EventNotificationReply_t; > + > +/**** Defines for the MsgFlags field ****/ > +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK (0x01) > +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED (0x01) > +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_NOT_REQUIRED (0x00) > +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_MASK (0x02) > +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_ORIGINAL (0x00) > +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_REPLAY (0x02) > + > +/**** Defines for the Event field - use MPI3_EVENT_ values ****/ > + > + > +/***************************************************************************** > + * GPIO Interrupt Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_GPIO_INTERRUPT { > + U8 GPIONum; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > +} MPI3_EVENT_DATA_GPIO_INTERRUPT, MPI3_POINTER PTR_MPI3_EVENT_DATA_GPIO_INTERRUPT, > + Mpi3EventDataGpioInterrupt_t, MPI3_POINTER pMpi3EventDataGpioInterrupt_t; > + > + > +/***************************************************************************** > + * Temperature Threshold Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_TEMP_THRESHOLD { > + U16 Status; /* 0x00 */ > + U8 SensorNum; /* 0x02 */ > + U8 Reserved03; /* 0x03 */ > + U16 CurrentTemperature; /* 0x04 */ > + U16 Reserved06; /* 0x06 */ > + U32 Reserved08; /* 0x08 */ > + U32 Reserved0C; /* 0x0C */ > +} MPI3_EVENT_DATA_TEMP_THRESHOLD, MPI3_POINTER PTR_MPI3_EVENT_DATA_TEMP_THRESHOLD, > + Mpi3EventDataTempThreshold_t, MPI3_POINTER pMpi3EventDataTempThreshold_t; > + > +/**** Defines for the Status field ****/ > +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD3_EXCEEDED (0x0008) > +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD2_EXCEEDED (0x0004) > +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD1_EXCEEDED (0x0002) > +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD0_EXCEEDED (0x0001) > + > + > +/***************************************************************************** > + * Cable Management Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_CABLE_MANAGEMENT { > + U32 ActiveCablePowerRequirement; /* 0x00 */ > + U8 Status; /* 0x04 */ > + U8 ReceptacleID; /* 0x05 */ > + U16 Reserved06; /* 0x06 */ > +} MPI3_EVENT_DATA_CABLE_MANAGEMENT, MPI3_POINTER PTR_MPI3_EVENT_DATA_CABLE_MANAGEMENT, > + Mpi3EventDataCableManagement_t, MPI3_POINTER pMpi3EventDataCableManagement_t; > + > +/**** Defines for the ActiveCablePowerRequirement field ****/ > +#define MPI3_EVENT_CABLE_MGMT_ACT_CABLE_PWR_INVALID (0xFFFFFFFF) > + > +/**** Defines for the Status field ****/ > +#define MPI3_EVENT_CABLE_MGMT_STATUS_INSUFFICIENT_POWER (0x00) > +#define MPI3_EVENT_CABLE_MGMT_STATUS_PRESENT (0x01) > +#define MPI3_EVENT_CABLE_MGMT_STATUS_DEGRADED (0x02) > + > + > +/***************************************************************************** > + * Event Ack Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_ACK_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U8 Event; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + U32 EventContext; /* 0x10 */ > +} MPI3_EVENT_ACK_REQUEST, MPI3_POINTER PTR_MPI3_EVENT_ACK_REQUEST, > + Mpi3EventAckRequest_t, MPI3_POINTER pMpi3EventAckRequest_t; > + > +/**** Defines for the Event field - use MPI3_EVENT_ values ****/ > + > + > +/***************************************************************************** > + * Prepare for Reset Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_PREPARE_FOR_RESET { > + U8 ReasonCode; /* 0x00 */ > + U8 Reserved01; /* 0x01 */ > + U16 Reserved02; /* 0x02 */ > +} MPI3_EVENT_DATA_PREPARE_FOR_RESET, MPI3_POINTER PTR_MPI3_EVENT_DATA_PREPARE_FOR_RESET, > + Mpi3EventDataPrepareForReset_t, MPI3_POINTER pMpi3EventDataPrepareForReset_t; > + > +/**** Defines for the ReasonCode field ****/ > +#define MPI3_EVENT_PREPARE_RESET_RC_START (0x01) > +#define MPI3_EVENT_PREPARE_RESET_RC_ABORT (0x02) > + > + > +/***************************************************************************** > + * Component Image Activation Start Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION { > + U32 Reserved00; /* 0x00 */ > +} MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION, MPI3_POINTER PTR_MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION, > + Mpi3EventDataCompImageActivation, MPI3_POINTER pMpi3EventDataCompImageActivation; > + > +/***************************************************************************** > + * Device Added Event * > + ****************************************************************************/ > +/* > + * The Device Added Event Data is exactly the same as Device Page 0 data > + * (including the Configuration Page header). So, please use/refer to > + * MPI3_DEVICE_PAGE0 structure for Device Added Event data. > + */ > + > +/**************************************************************************** > + * Device Info Changed Event * > + ****************************************************************************/ > +/* > + * The Device Info Changed Event Data is exactly the same as Device Page 0 data > + * (including the Configuration Page header). So, please use/refer to > + * MPI3_DEVICE_PAGE0 structure for Device Added Event data. > + */ > + > +/***************************************************************************** > + * Device Status Change Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE { > + U16 TaskTag; /* 0x00 */ > + U8 ReasonCode; /* 0x02 */ > + U8 IOUnitPort; /* 0x03 */ > + U16 ParentDevHandle; /* 0x04 */ > + U16 DevHandle; /* 0x06 */ > + U64 WWID; /* 0x08 */ > + U8 LUN[8]; /* 0x10 */ > +} MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE, > + Mpi3EventDataDeviceStatusChange_t, MPI3_POINTER pMpi3EventDataDeviceStatusChange_t; > + > +/**** Defines for the ReasonCode field ****/ > +#define MPI3_EVENT_DEV_STAT_RC_MOVED (0x01) > +#define MPI3_EVENT_DEV_STAT_RC_HIDDEN (0x02) > +#define MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN (0x03) > +#define MPI3_EVENT_DEV_STAT_RC_ASYNC_NOTIFICATION (0x04) > +#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT (0x20) > +#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP (0x21) > +#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_STRT (0x22) > +#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_CMP (0x23) > +#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT (0x24) > +#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP (0x25) > +#define MPI3_EVENT_DEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x30) > +#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_STRT (0x40) > +#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_CMP (0x41) > +#define MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING (0x50) > + > +/***************************************************************************** > + * Energy Pack Change Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_ENERGY_PACK_CHANGE { > + U32 Reserved00; /* 0x00 */ > + U16 ShutdownTimeout; /* 0x04 */ > + U16 Reserved06; /* 0x06 */ > +} MPI3_EVENT_DATA_ENERGY_PACK_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_ENERGY_PACK_CHANGE, > + Mpi3EventDataEnergyPackChange_t, MPI3_POINTER pMpi3EventDataEnergyPackChange_t; > + > +/***************************************************************************** > + * SAS Discovery Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_SAS_DISCOVERY { > + U8 Flags; /* 0x00 */ > + U8 ReasonCode; /* 0x01 */ > + U8 IOUnitPort; /* 0x02 */ > + U8 Reserved03; /* 0x03 */ > + U32 DiscoveryStatus; /* 0x04 */ > +} MPI3_EVENT_DATA_SAS_DISCOVERY, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_DISCOVERY, > + Mpi3EventDataSasDiscovery_t, MPI3_POINTER pMpi3EventDataSasDiscovery_t; > + > +/**** Defines for the Flags field ****/ > +#define MPI3_EVENT_SAS_DISC_FLAGS_DEVICE_CHANGE (0x02) > +#define MPI3_EVENT_SAS_DISC_FLAGS_IN_PROGRESS (0x01) > + > +/**** Defines for the ReasonCode field ****/ > +#define MPI3_EVENT_SAS_DISC_RC_STARTED (0x01) > +#define MPI3_EVENT_SAS_DISC_RC_COMPLETED (0x02) > + > +/**** Defines for the DiscoveryStatus field ****/ > +#define MPI3_SAS_DISC_STATUS_MAX_ENCLOSURES_EXCEED (0x80000000) > +#define MPI3_SAS_DISC_STATUS_MAX_EXPANDERS_EXCEED (0x40000000) > +#define MPI3_SAS_DISC_STATUS_MAX_DEVICES_EXCEED (0x20000000) > +#define MPI3_SAS_DISC_STATUS_MAX_TOPO_PHYS_EXCEED (0x10000000) > +#define MPI3_SAS_DISC_STATUS_MULTIPLE_DEVICES_IN_SLOT (0x00004000) > +#define MPI3_SAS_DISC_STATUS_SLOT_COUNT_MISMATCH (0x00002000) > +#define MPI3_SAS_DISC_STATUS_TOO_MANY_SLOTS (0x00001000) > +#define MPI3_SAS_DISC_STATUS_EXP_MULTI_SUBTRACTIVE (0x00000800) > +#define MPI3_SAS_DISC_STATUS_MULTI_PORT_DOMAIN (0x00000400) > +#define MPI3_SAS_DISC_STATUS_TABLE_TO_SUBTRACTIVE_LINK (0x00000200) > +#define MPI3_SAS_DISC_STATUS_UNSUPPORTED_DEVICE (0x00000100) > +#define MPI3_SAS_DISC_STATUS_TABLE_LINK (0x00000080) > +#define MPI3_SAS_DISC_STATUS_SUBTRACTIVE_LINK (0x00000040) > +#define MPI3_SAS_DISC_STATUS_SMP_CRC_ERROR (0x00000020) > +#define MPI3_SAS_DISC_STATUS_SMP_FUNCTION_FAILED (0x00000010) > +#define MPI3_SAS_DISC_STATUS_SMP_TIMEOUT (0x00000008) > +#define MPI3_SAS_DISC_STATUS_MULTIPLE_PORTS (0x00000004) > +#define MPI3_SAS_DISC_STATUS_INVALID_SAS_ADDRESS (0x00000002) > +#define MPI3_SAS_DISC_STATUS_LOOP_DETECTED (0x00000001) > + > + > +/***************************************************************************** > + * SAS Broadcast Primitive Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { > + U8 PhyNum; /* 0x00 */ > + U8 IOUnitPort; /* 0x01 */ > + U8 PortWidth; /* 0x02 */ > + U8 Primitive; /* 0x03 */ > +} MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, > + Mpi3EventDataSasBroadcastPrimitive_t, MPI3_POINTER pMpi3EventDataSasBroadcastPrimitive_t; > + > +/**** Defines for the Primitive field ****/ > +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE (0x01) > +#define MPI3_EVENT_BROADCAST_PRIMITIVE_SES (0x02) > +#define MPI3_EVENT_BROADCAST_PRIMITIVE_EXPANDER (0x03) > +#define MPI3_EVENT_BROADCAST_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) > +#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED3 (0x05) > +#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED4 (0x06) > +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE0_RESERVED (0x07) > +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE1_RESERVED (0x08) > + > + > +/***************************************************************************** > + * SAS Notify Primitive Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { > + U8 PhyNum; /* 0x00 */ > + U8 IOUnitPort; /* 0x01 */ > + U8 Reserved02; /* 0x02 */ > + U8 Primitive; /* 0x03 */ > +} MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, > + Mpi3EventDataSasNotifyPrimitive_t, MPI3_POINTER pMpi3EventDataSasNotifyPrimitive_t; > + > +/**** Defines for the Primitive field ****/ > +#define MPI3_EVENT_NOTIFY_PRIMITIVE_ENABLE_SPINUP (0x01) > +#define MPI3_EVENT_NOTIFY_PRIMITIVE_POWER_LOSS_EXPECTED (0x02) > +#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED1 (0x03) > +#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED2 (0x04) > + > + > +/***************************************************************************** > + * SAS Topology Change List Event * > + ****************************************************************************/ > +#ifndef MPI3_EVENT_SAS_TOPO_PHY_COUNT > +#define MPI3_EVENT_SAS_TOPO_PHY_COUNT (1) > +#endif /* MPI3_EVENT_SAS_TOPO_PHY_COUNT */ > + > +typedef struct _MPI3_EVENT_SAS_TOPO_PHY_ENTRY { > + U16 AttachedDevHandle; /* 0x00 */ > + U8 LinkRate; /* 0x02 */ > + U8 Status; /* 0x03 */ > +} MPI3_EVENT_SAS_TOPO_PHY_ENTRY, MPI3_POINTER PTR_MPI3_EVENT_SAS_TOPO_PHY_ENTRY, > + Mpi3EventSasTopoPhyEntry_t, MPI3_POINTER pMpi3EventSasTopoPhyEntry_t; > + > +/**** Defines for the LinkRate field ****/ > +#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) > +#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) > +#define MPI3_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) > +#define MPI3_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) > +#define MPI3_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) > +#define MPI3_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) > +#define MPI3_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) > +#define MPI3_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) > +#define MPI3_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) > +#define MPI3_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) > +#define MPI3_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) > +#define MPI3_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) > +#define MPI3_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) > +#define MPI3_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C) > + > +/**** Defines for the PhyStatus field ****/ > +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_MASK (0xC0) > +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_SHIFT (6) > +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_ACCESSIBLE (0x00) > +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_NO_EXIST (0x40) > +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_VACANT (0x80) > +#define MPI3_EVENT_SAS_TOPO_PHY_RC_MASK (0x0F) > +#define MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING (0x02) > +#define MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED (0x03) > +#define MPI3_EVENT_SAS_TOPO_PHY_RC_NO_CHANGE (0x04) > +#define MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING (0x05) > +#define MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING (0x06) > + > + > +typedef struct _MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { > + U16 EnclosureHandle; /* 0x00 */ > + U16 ExpanderDevHandle; /* 0x02 */ > + U8 NumPhys; /* 0x04 */ > + U8 Reserved05[3]; /* 0x05 */ > + U8 NumEntries; /* 0x08 */ > + U8 StartPhyNum; /* 0x09 */ > + U8 ExpStatus; /* 0x0A */ > + U8 IOUnitPort; /* 0x0B */ > + MPI3_EVENT_SAS_TOPO_PHY_ENTRY PhyEntry[MPI3_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C */ > +} MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, > + Mpi3EventDataSasTopologyChangeList_t, MPI3_POINTER pMpi3EventDataSasTopologyChangeList_t; > + > +/**** Defines for the ExpStatus field ****/ > +#define MPI3_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) > +#define MPI3_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) > +#define MPI3_EVENT_SAS_TOPO_ES_RESPONDING (0x03) > +#define MPI3_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) > + > +/***************************************************************************** > + * SAS PHY Counter Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_SAS_PHY_COUNTER { > + U64 TimeStamp; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 PhyEventCode; /* 0x0C */ > + U8 PhyNum; /* 0x0D */ > + U16 Reserved0E; /* 0x0E */ > + U32 PhyEventInfo; /* 0x10 */ > + U8 CounterType; /* 0x14 */ > + U8 ThresholdWindow; /* 0x15 */ > + U8 TimeUnits; /* 0x16 */ > + U8 Reserved17; /* 0x17 */ > + U32 EventThreshold; /* 0x18 */ > + U16 ThresholdFlags; /* 0x1C */ > + U16 Reserved1E; /* 0x1E */ > +} MPI3_EVENT_DATA_SAS_PHY_COUNTER, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_PHY_COUNTER, > + Mpi3EventDataSasPhyCounter_t, MPI3_POINTER pMpi3EventDataSasPhyCounter_t; > + > +/**** Defines for the PhyEventCode field - use MPI3_SASPHY3_EVENT_CODE_ defines ****/ > + > +/**** Defines for the CounterType field - use MPI3_SASPHY3_COUNTER_TYPE_ defines ****/ > + > +/**** Defines for the TimeUnits field - use MPI3_SASPHY3_TIME_UNITS_ defines ****/ > + > +/**** Defines for the ThresholdFlags field - use MPI3_SASPHY3_TFLAGS_ defines ****/ > + > + > +/***************************************************************************** > + * SAS Device Discovery Error Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR { > + U16 DevHandle; /* 0x00 */ > + U8 ReasonCode; /* 0x02 */ > + U8 IOUnitPort; /* 0x03 */ > + U32 Reserved04; /* 0x04 */ > + U64 SASAddress; /* 0x08 */ > +} MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR, > + Mpi3EventDataSasDeviceDiscErr_t, MPI3_POINTER pMpi3EventDataSasDeviceDiscErr_t; > + > +/**** Defines for the ReasonCode field ****/ > +#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_FAILED (0x01) > +#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_TIMEOUT (0x02) > + > +/***************************************************************************** > + * PCIe Enumeration Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_PCIE_ENUMERATION { > + U8 Flags; /* 0x00 */ > + U8 ReasonCode; /* 0x01 */ > + U8 IOUnitPort; /* 0x02 */ > + U8 Reserved03; /* 0x03 */ > + U32 EnumerationStatus; /* 0x04 */ > +} MPI3_EVENT_DATA_PCIE_ENUMERATION, MPI3_POINTER PTR_MPI3_EVENT_DATA_PCIE_ENUMERATION, > + Mpi3EventDataPcieEnumeration_t, MPI3_POINTER pMpi3EventDataPcieEnumeration_t; > + > +/**** Defines for the Flags field ****/ > +#define MPI3_EVENT_PCIE_ENUM_FLAGS_DEVICE_CHANGE (0x02) > +#define MPI3_EVENT_PCIE_ENUM_FLAGS_IN_PROGRESS (0x01) > + > +/**** Defines for the ReasonCode field ****/ > +#define MPI3_EVENT_PCIE_ENUM_RC_STARTED (0x01) > +#define MPI3_EVENT_PCIE_ENUM_RC_COMPLETED (0x02) > + > +/**** Defines for the EnumerationStatus field ****/ > +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCH_DEPTH_EXCEED (0x80000000) > +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000) > +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000) > +#define MPI3_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000) > + > + > +/***************************************************************************** > + * PCIe Topology Change List Event * > + ****************************************************************************/ > +#ifndef MPI3_EVENT_PCIE_TOPO_PORT_COUNT > +#define MPI3_EVENT_PCIE_TOPO_PORT_COUNT (1) > +#endif /* MPI3_EVENT_PCIE_TOPO_PORT_COUNT */ > + > +typedef struct _MPI3_EVENT_PCIE_TOPO_PORT_ENTRY { > + U16 AttachedDevHandle; /* 0x00 */ > + U8 PortStatus; /* 0x02 */ > + U8 Reserved03; /* 0x03 */ > + U8 CurrentPortInfo; /* 0x04 */ > + U8 Reserved05; /* 0x05 */ > + U8 PreviousPortInfo; /* 0x06 */ > + U8 Reserved07; /* 0x07 */ > +} MPI3_EVENT_PCIE_TOPO_PORT_ENTRY, MPI3_POINTER PTR_MPI3_EVENT_PCIE_TOPO_PORT_ENTRY, > + Mpi3EventPcieTopoPortEntry_t, MPI3_POINTER pMpi3EventPcieTopoPortEntry_t; > + > +/**** Defines for the PortStatus field ****/ > +#define MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02) > +#define MPI3_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03) > +#define MPI3_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04) > +#define MPI3_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05) > +#define MPI3_EVENT_PCIE_TOPO_PS_RESPONDING (0x06) > + > +/**** Defines for the CurrentPortInfo and PreviousPortInfo field ****/ > +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_MASK (0xF0) > +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00) > +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_1 (0x10) > +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_2 (0x20) > +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_4 (0x30) > +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_8 (0x40) > +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_16 (0x50) > + > +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) > +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) > +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01) > +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02) > +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03) > +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04) > +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05) > +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_32_0 (0x06) > + > +typedef struct _MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST { > + U16 EnclosureHandle; /* 0x00 */ > + U16 SwitchDevHandle; /* 0x02 */ > + U8 NumPorts; /* 0x04 */ > + U8 Reserved05[3]; /* 0x05 */ > + U8 NumEntries; /* 0x08 */ > + U8 StartPortNum; /* 0x09 */ > + U8 SwitchStatus; /* 0x0A */ > + U8 IOUnitPort; /* 0x0B */ > + U32 Reserved0C; /* 0x0C */ > + MPI3_EVENT_PCIE_TOPO_PORT_ENTRY PortEntry[MPI3_EVENT_PCIE_TOPO_PORT_COUNT]; /* 0x10 */ > +} MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, MPI3_POINTER PTR_MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, > + Mpi3EventDataPcieTopologyChangeList_t, MPI3_POINTER pMpi3EventDataPcieTopologyChangeList_t; > + > +/**** Defines for the SwitchStatus field ****/ > +#define MPI3_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00) > +#define MPI3_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02) > +#define MPI3_EVENT_PCIE_TOPO_SS_RESPONDING (0x03) > +#define MPI3_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04) > + > +/**************************************************************************** > + * Enclosure Device Added Event * > + ****************************************************************************/ > +/* > + * The Enclosure Device Added Event Data is exactly the same as Enclosure > + * Page 0 data (including the Configuration Page header). So, please > + * use/refer to MPI3_ENCLOSURE_PAGE0 structure for Enclosure Device Added > + * Event data. > + */ > + > +/**************************************************************************** > + * Enclosure Device Changed Event * > + ****************************************************************************/ > +/* > + * The Enclosure Device Change Event Data is exactly the same as Enclosure > + * Page 0 data (including the Configuration Page header). So, please > + * use/refer to MPI3_ENCLOSURE_PAGE0 structure for Enclosure Device Change > + * Event data. > + */ > + > +/***************************************************************************** > + * SAS Initiator Device Status Change Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { > + U8 ReasonCode; /* 0x00 */ > + U8 IOUnitPort; /* 0x01 */ > + U16 DevHandle; /* 0x02 */ > + U32 Reserved04; /* 0x04 */ > + U64 SASAddress; /* 0x08 */ > +} MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, > + Mpi3EventDataSasInitDevStatusChange_t, MPI3_POINTER pMpi3EventDataSasInitDevStatusChange_t; > + > +/**** Defines for the ReasonCode field ****/ > +#define MPI3_EVENT_SAS_INIT_RC_ADDED (0x01) > +#define MPI3_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) > + > + > +/***************************************************************************** > + * SAS Initiator Device Table Overflow Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { > + U16 MaxInit; /* 0x00 */ > + U16 CurrentInit; /* 0x02 */ > + U32 Reserved04; /* 0x04 */ > + U64 SASAddress; /* 0x08 */ > +} MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, > + Mpi3EventDataSasInitTableOverflow_t, MPI3_POINTER pMpi3EventDataSasInitTableOverflow_t; > + > + > +/***************************************************************************** > + * Hard Reset Received Event * > + ****************************************************************************/ > +typedef struct _MPI3_EVENT_DATA_HARD_RESET_RECEIVED { > + U8 Reserved00; /* 0x00 */ > + U8 IOUnitPort; /* 0x01 */ > + U16 Reserved02; /* 0x02 */ > +} MPI3_EVENT_DATA_HARD_RESET_RECEIVED, MPI3_POINTER PTR_MPI3_EVENT_DATA_HARD_RESET_RECEIVED, > + Mpi3EventDataHardResetReceived_t, MPI3_POINTER pMpi3EventDataHardResetReceived_t; > + > + > +/***************************************************************************** > + * Persistent Event Logs * > + ****************************************************************************/ > + > +/**** Definitions for the Locale field ****/ > +#define MPI3_PEL_LOCALE_FLAGS_NON_BLOCKING_BOOT_EVENT (0x0200) > +#define MPI3_PEL_LOCALE_FLAGS_BLOCKING_BOOT_EVENT (0x0100) > +#define MPI3_PEL_LOCALE_FLAGS_PCIE (0x0080) > +#define MPI3_PEL_LOCALE_FLAGS_CONFIGURATION (0x0040) > +#define MPI3_PEL_LOCALE_FLAGS_CONTROLER (0x0020) > +#define MPI3_PEL_LOCALE_FLAGS_SAS (0x0010) > +#define MPI3_PEL_LOCALE_FLAGS_EPACK (0x0008) > +#define MPI3_PEL_LOCALE_FLAGS_ENCLOSURE (0x0004) > +#define MPI3_PEL_LOCALE_FLAGS_PD (0x0002) > +#define MPI3_PEL_LOCALE_FLAGS_VD (0x0001) > + > +/**** Definitions for the Class field ****/ > +#define MPI3_PEL_CLASS_DEBUG (0x00) > +#define MPI3_PEL_CLASS_PROGRESS (0x01) > +#define MPI3_PEL_CLASS_INFORMATIONAL (0x02) > +#define MPI3_PEL_CLASS_WARNING (0x03) > +#define MPI3_PEL_CLASS_CRITICAL (0x04) > +#define MPI3_PEL_CLASS_FATAL (0x05) > +#define MPI3_PEL_CLASS_FAULT (0x06) > + > +/**** Definitions for the ClearType field ****/ > +#define MPI3_PEL_CLEARTYPE_CLEAR (0x00) > + > +/**** Definitions for the WaitTime field ****/ > +#define MPI3_PEL_WAITTIME_INFINITE_WAIT (0x00) > + > +/**** Definitions for the Action field ****/ > +#define MPI3_PEL_ACTION_GET_SEQNUM (0x01) > +#define MPI3_PEL_ACTION_MARK_CLEAR (0x02) > +#define MPI3_PEL_ACTION_GET_LOG (0x03) > +#define MPI3_PEL_ACTION_GET_COUNT (0x04) > +#define MPI3_PEL_ACTION_WAIT (0x05) > +#define MPI3_PEL_ACTION_ABORT (0x06) > +#define MPI3_PEL_ACTION_GET_PRINT_STRINGS (0x07) > +#define MPI3_PEL_ACTION_ACKNOWLEDGE (0x08) > + > +/**** Definitions for the LogStatus field ****/ > +#define MPI3_PEL_STATUS_SUCCESS (0x00) > +#define MPI3_PEL_STATUS_NOT_FOUND (0x01) > +#define MPI3_PEL_STATUS_ABORTED (0x02) > +#define MPI3_PEL_STATUS_NOT_READY (0x03) > + > +/**************************************************************************** > + * PEL Sequence Numbers * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_SEQ { > + U32 Newest; /* 0x00 */ > + U32 Oldest; /* 0x04 */ > + U32 Clear; /* 0x08 */ > + U32 Shutdown; /* 0x0C */ > + U32 Boot; /* 0x10 */ > + U32 LastAcknowledged; /* 0x14 */ > +} MPI3_PEL_SEQ, MPI3_POINTER PTR_MPI3_PEL_SEQ, > + Mpi3PELSeq_t, MPI3_POINTER pMpi3PELSeq_t; > + > +/**************************************************************************** > + * PEL Entry * > + ****************************************************************************/ > + > +typedef struct _MPI3_PEL_ENTRY { > + U32 SequenceNumber; /* 0x00 */ > + U32 TimeStamp[2]; /* 0x04 */ > + U16 LogCode; /* 0x0C */ > + U16 ArgType; /* 0x0E */ > + U16 Locale; /* 0x10 */ > + U8 Class; /* 0x12 */ > + U8 Reserved13; /* 0x13 */ > + U8 ExtNum; /* 0x14 */ > + U8 NumExts; /* 0x15 */ > + U8 ArgDataSize; /* 0x16 */ > + U8 FixedFormatSize; /* 0x17 */ > + U32 Reserved18[2]; /* 0x18 */ > + U32 PELInfo[24]; /* 0x20 - 0x7F */ > +} MPI3_PEL_ENTRY, MPI3_POINTER PTR_MPI3_PEL_ENTRY, > + Mpi3PELEntry_t, MPI3_POINTER pMpi3PELEntry_t; > + > +/**************************************************************************** > + * PEL Event List * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_LIST { > + U32 LogCount; /* 0x00 */ > + U32 Reserved04; /* 0x04 */ > + MPI3_PEL_ENTRY Entry[1]; /* 0x08 */ /* variable length */ > +} MPI3_PEL_LIST, MPI3_POINTER PTR_MPI3_PEL_LIST, > + Mpi3PELList_t, MPI3_POINTER pMpi3PELList_t; > + > +/**************************************************************************** > + * PEL Count Data * > + ****************************************************************************/ > +typedef U32 MPI3_PEL_LOG_COUNT, MPI3_POINTER PTR_MPI3_PEL_LOG_COUNT, > + Mpi3PELLogCount_t, MPI3_POINTER pMpi3PELLogCount_t; > + > +/**************************************************************************** > + * PEL Arg Map * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_ARG_MAP { > + U8 ArgType; /* 0x00 */ > + U8 Length; /* 0x01 */ > + U16 StartLocation; /* 0x02 */ > +} MPI3_PEL_ARG_MAP, MPI3_POINTER PTR_MPI3_PEL_ARG_MAP, > + Mpi3PELArgMap_t, MPI3_POINTER pMpi3PELArgMap_t; > + > +/**** Definitions for the ArgType field ****/ > +#define MPI3_PEL_ARG_MAP_ARG_TYPE_APPEND_STRING (0x00) > +#define MPI3_PEL_ARG_MAP_ARG_TYPE_INTEGER (0x01) > +#define MPI3_PEL_ARG_MAP_ARG_TYPE_STRING (0x02) > +#define MPI3_PEL_ARG_MAP_ARG_TYPE_BIT_FIELD (0x03) > + > + > +/**************************************************************************** > + * PEL Print String * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_PRINT_STRING { > + U16 LogCode; /* 0x00 */ > + U16 StringLength; /* 0x02 */ > + U8 NumArgMap; /* 0x04 */ > + U8 Reserved05[3]; /* 0x05 */ > + MPI3_PEL_ARG_MAP ArgMap[1]; /* 0x08 */ /* variable length */ > +} MPI3_PEL_PRINT_STRING, MPI3_POINTER PTR_MPI3_PEL_PRINT_STRING, > + Mpi3PELPrintString_t, MPI3_POINTER pMpi3PELPrintString_t; > + > +/**************************************************************************** > + * PEL Print String List * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_PRINT_STRING_LIST { > + U32 NumPrintStrings; /* 0x00 */ > + U32 ResidualBytesRemain; /* 0x04 */ > + U32 Reserved08[2]; /* 0x08 */ > + MPI3_PEL_PRINT_STRING PrintString[1]; /* 0x10 */ /* variable length */ > +} MPI3_PEL_PRINT_STRING_LIST, MPI3_POINTER PTR_MPI3_PEL_PRINT_STRING_LIST, > + Mpi3PELPrintStringList_t, MPI3_POINTER pMpi3PELPrintStringList_t; > + > + > +/**************************************************************************** > + * PEL Request Msg - generic to allow header decoding * > + ****************************************************************************/ > +#ifndef MPI3_PEL_ACTION_SPECIFIC_MAX > +#define MPI3_PEL_ACTION_SPECIFIC_MAX (1) > +#endif /* MPI3_PEL_ACTION_SPECIFIC_MAX */ > + > +typedef struct _MPI3_PEL_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Action; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U32 ActionSpecific[MPI3_PEL_ACTION_SPECIFIC_MAX]; /* 0x0C */ /* variable length */ > +} MPI3_PEL_REQUEST, MPI3_POINTER PTR_MPI3_PEL_REQUEST, > + Mpi3PELRequest_t, MPI3_POINTER pMpi3PELRequest_t; > + > +/**************************************************************************** > + * PEL ACTION Get Sequence Nembers * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Action; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U32 Reserved0C[5]; /* 0x0C */ > + MPI3_SGE_UNION SGL; /* 0x20 */ > +} MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS, > + Mpi3PELReqActionGetSequenceNumbers_t, MPI3_POINTER pMpi3PELReqActionGetSequenceNumbers_t; > + > +/**************************************************************************** > + * PEL ACTION Clear Log * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Action; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U8 ClearType; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > +} MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER, > + Mpi3PELReqActionClearLogMMarker_t, MPI3_POINTER pMpi3PELReqActionClearLogMMarker_t; > + > +/**************************************************************************** > + * PEL ACTION Get Log * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_REQ_ACTION_GET_LOG { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Action; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U32 StartingSequenceNumber; /* 0x0C */ > + U16 Locale; /* 0x10 */ > + U8 Class; /* 0x12 */ > + U8 Reserved13; /* 0x13 */ > + U32 Reserved14[3]; /* 0x14 */ > + MPI3_SGE_UNION SGL; /* 0x20 */ > +} MPI3_PEL_REQ_ACTION_GET_LOG, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_LOG, > + Mpi3PELReqActionGetLog_t, MPI3_POINTER pMpi3PELReqActionGetLog_t; > + > +/**************************************************************************** > + * PEL ACTION Get Count * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_REQ_ACTION_GET_COUNT { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Action; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U32 StartingSequenceNumber; /* 0x0C */ > + U16 Locale; /* 0x10 */ > + U8 Class; /* 0x12 */ > + U8 Reserved13; /* 0x13 */ > + U32 Reserved14[3]; /* 0x14 */ > + MPI3_SGE_UNION SGL; /* 0x20 */ > +} MPI3_PEL_REQ_ACTION_GET_COUNT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_COUNT, > + Mpi3PELReqActionGetCount_t, MPI3_POINTER pMpi3PELReqActionGetCount_t; > + > +/**************************************************************************** > + * PEL ACTION Wait * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_REQ_ACTION_WAIT { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Action; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U32 StartingSequenceNumber; /* 0x0C */ > + U16 Locale; /* 0x10 */ > + U8 Class; /* 0x12 */ > + U8 Reserved13; /* 0x13 */ > + U16 WaitTime; /* 0x14 */ > + U16 Reserved16; /* 0x16 */ > + U32 Reserved18[2]; /* 0x18 */ > +} MPI3_PEL_REQ_ACTION_WAIT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_WAIT, > + Mpi3PELReqActionWait_t, MPI3_POINTER pMpi3PELReqActionWait_t; > + > +/**************************************************************************** > + * PEL ACTION Abort * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_REQ_ACTION_ABORT { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Action; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U32 Reserved0C; /* 0x0C */ > + U16 AbortHostTag; /* 0x10 */ > + U16 Reserved12; /* 0x12 */ > + U32 Reserved14; /* 0x14 */ > +} MPI3_PEL_REQ_ACTION_ABORT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_ABORT, > + Mpi3PELReqActionAbort_t, MPI3_POINTER pMpi3PELReqActionAbort_t; > + > +/**************************************************************************** > + * PEL ACTION Get Print Strings * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Action; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U32 Reserved0C; /* 0x0C */ > + U16 StartLogCode; /* 0x10 */ > + U16 Reserved12; /* 0x12 */ > + U32 Reserved14[3]; /* 0x14 */ > + MPI3_SGE_UNION SGL; /* 0x20 */ > +} MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS, > + Mpi3PELReqActionGetPrintStrings_t, MPI3_POINTER pMpi3PELReqActionGetPrintStrings_t; > + > +/**************************************************************************** > + * PEL ACTION Acknowledge * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_REQ_ACTION_ACKNOWLEDGE { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Action; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U32 SequenceNumber; /* 0x0C */ > + U32 Reserved10; /* 0x10 */ > +} MPI3_PEL_REQ_ACTION_ACKNOWLEDGE, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_ACKNOWLEDGE, > + Mpi3PELReqActionAcknowledge_t, MPI3_POINTER pMpi3PELReqActionAcknowledge_t; > + > +/**** Definitions for the MsgFlags field ****/ > +#define MPI3_PELACKNOWLEDGE_MSGFLAGS_SAFE_MODE_EXIT (0x01) > + > +/**************************************************************************** > + * PEL Reply * > + ****************************************************************************/ > +typedef struct _MPI3_PEL_REPLY { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 IOCUseOnly08; /* 0x08 */ > + U16 IOCStatus; /* 0x0A */ > + U32 IOCLogInfo; /* 0x0C */ > + U8 Action; /* 0x10 */ > + U8 Reserved11; /* 0x11 */ > + U16 Reserved12; /* 0x12 */ > + U16 PELogStatus; /* 0x14 */ > + U16 Reserved16; /* 0x16 */ > + U32 TransferLength; /* 0x18 */ > +} MPI3_PEL_REPLY, MPI3_POINTER PTR_MPI3_PEL_REPLY, > + Mpi3PELReply_t, MPI3_POINTER pMpi3PELReply_t; > + > + > +/***************************************************************************** > + * Component Image Download * > + ****************************************************************************/ > +typedef struct _MPI3_CI_DOWNLOAD_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Action; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U32 Signature1; /* 0x0C */ > + U32 TotalImageSize; /* 0x10 */ > + U32 ImageOffset; /* 0x14 */ > + U32 SegmentSize; /* 0x18 */ > + U32 Reserved1C; /* 0x1C */ > + MPI3_SGE_UNION SGL; /* 0x20 */ > +} MPI3_CI_DOWNLOAD_REQUEST, MPI3_POINTER PTR_MPI3_CI_DOWNLOAD_REQUEST, > + Mpi3CIDownloadRequest_t, MPI3_POINTER pMpi3CIDownloadRequest_t; > + > +/**** Definitions for the MsgFlags field ****/ > +#define MPI3_CI_DOWNLOAD_MSGFLAGS_LAST_SEGMENT (0x80) > +#define MPI3_CI_DOWNLOAD_MSGFLAGS_FORCE_FMC_ENABLE (0x40) > +#define MPI3_CI_DOWNLOAD_MSGFLAGS_SIGNED_NVDATA (0x20) > +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MASK (0x03) > +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_FAST (0x00) > +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MEDIUM (0x01) > +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_SLOW (0x02) > + > +/**** Definitions for the Action field ****/ > +#define MPI3_CI_DOWNLOAD_ACTION_DOWNLOAD (0x01) > +#define MPI3_CI_DOWNLOAD_ACTION_ONLINE_ACTIVATION (0x02) > +#define MPI3_CI_DOWNLOAD_ACTION_OFFLINE_ACTIVATION (0x03) > +#define MPI3_CI_DOWNLOAD_ACTION_GET_STATUS (0x04) > + > +typedef struct _MPI3_CI_DOWNLOAD_REPLY { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 IOCUseOnly08; /* 0x08 */ > + U16 IOCStatus; /* 0x0A */ > + U32 IOCLogInfo; /* 0x0C */ > + U8 Flags; /* 0x10 */ > + U8 CacheDirty; /* 0x11 */ > + U8 PendingCount; /* 0x12 */ > + U8 Reserved13; /* 0x13 */ > +} MPI3_CI_DOWNLOAD_REPLY, MPI3_POINTER PTR_MPI3_CI_DOWNLOAD_REPLY, > + Mpi3CIDownloadReply_t, MPI3_POINTER pMpi3CIDownloadReply_t; > + > +/**** Definitions for the Flags field ****/ > +#define MPI3_CI_DOWNLOAD_FLAGS_DOWNLOAD_IN_PROGRESS (0x80) > +#define MPI3_CI_DOWNLOAD_FLAGS_KEY_UPDATE_PENDING (0x10) > +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_MASK (0x0E) > +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_NOT_NEEDED (0x00) > +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_AWAITING (0x02) > +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_ONLINE_PENDING (0x04) > +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_OFFLINE_PENDING (0x06) > +#define MPI3_CI_DOWNLOAD_FLAGS_COMPATIBLE (0x01) > + > +/***************************************************************************** > + * Component Image Upload * > + ****************************************************************************/ > +typedef struct _MPI3_CI_UPLOAD_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U32 Signature1; /* 0x0C */ > + U32 Reserved10; /* 0x10 */ > + U32 ImageOffset; /* 0x14 */ > + U32 SegmentSize; /* 0x18 */ > + U32 Reserved1C; /* 0x1C */ > + MPI3_SGE_UNION SGL; /* 0x20 */ > +} MPI3_CI_UPLOAD_REQUEST, MPI3_POINTER PTR_MPI3_CI_UPLOAD_REQUEST, > + Mpi3CIUploadRequest_t, MPI3_POINTER pMpi3CIUploadRequest_t; > + > +/**** Defines for the MsgFlags field ****/ > +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_MASK (0x01) > +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_PRIMARY (0x00) > +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_SECONDARY (0x01) > +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_MASK (0x02) > +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_FLASH (0x00) > +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_EXECUTABLE (0x02) > + > +/**** Defines for Signature1 field - use MPI3_IMAGE_HEADER_SIGNATURE1_ defines */ > + > +/***************************************************************************** > + * IO Unit Control * > + ****************************************************************************/ > + > +/**** Definitions for the Operation field ****/ > +#define MPI3_CTRL_OP_FORCE_FULL_DISCOVERY (0x01) > +#define MPI3_CTRL_OP_LOOKUP_MAPPING (0x02) > +#define MPI3_CTRL_OP_UPDATE_TIMESTAMP (0x04) > +#define MPI3_CTRL_OP_GET_TIMESTAMP (0x05) > +#define MPI3_CTRL_OP_REMOVE_DEVICE (0x10) > +#define MPI3_CTRL_OP_CLOSE_PERSISTENT_CONNECTION (0x11) > +#define MPI3_CTRL_OP_HIDDEN_ACK (0x12) > +#define MPI3_CTRL_OP_SAS_SEND_PRIMITIVE (0x20) > +#define MPI3_CTRL_OP_SAS_CLEAR_ERROR_LOG (0x21) > +#define MPI3_CTRL_OP_PCIE_CLEAR_ERROR_LOG (0x22) > + > +/**** Depending on the Operation selected, the various ParamX fields *****/ > +/**** contain defined data values. These indexes help identify those values *****/ > +#define MPI3_CTRL_OP_LOOKUP_MAPPING_PARAM8_LOOKUP_METHOD_INDEX (0x00) > +#define MPI3_CTRL_OP_UPDATE_TIMESTAMP_PARAM64_TIMESTAMP_INDEX (0x00) > +#define MPI3_CTRL_OP_REMOVE_DEVICE_PARAM16_DEVHANDLE_INDEX (0x00) > +#define MPI3_CTRL_OP_CLOSE_PERSIST_CONN_PARAM16_DEVHANDLE_INDEX (0x00) > +#define MPI3_CTRL_OP_HIDDEN_ACK_PARAM16_DEVHANDLE_INDEX (0x00) > +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PHY_INDEX (0x00) > +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PRIMSEQ_INDEX (0x01) > +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM32_PRIMITIVE_INDEX (0x00) > +#define MPI3_CTRL_OP_SAS_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00) > +#define MPI3_CTRL_OP_PCIE_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00) > + > +/**** Definitions for the LookupMethod field ****/ > +#define MPI3_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) > +#define MPI3_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) > +#define MPI3_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) > +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTENT_ID (0x04) > + > +/**** Definitions for IoUnitControl Lookup Mapping Method Parameters ****/ > +#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM16_DEVH_INDEX (0) > +#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM64_WWID_INDEX (0) > +#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM16_SLOTNUM_INDEX (0) > +#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM64_ENCLOSURELID_INDEX (0) > +#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM16_DEVH_INDEX (0) > +#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM64_DEVNAME_INDEX (0) > +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_DEVH_INDEX (0) > +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_PERSISTENT_ID_INDEX (1) > + > +/*** Definitions for IoUnitControl Reply fields ****/ > +#define MPI3_CTRL_LOOKUP_METHOD_VALUE16_DEVH_INDEX (0) > +#define MPI3_CTRL_GET_TIMESTAMP_VALUE64_TIMESTAMP_INDEX (0) > + > + > +/**** Definitions for the PrimSeq field ****/ > +#define MPI3_CTRL_PRIMFLAGS_SINGLE (0x01) > +#define MPI3_CTRL_PRIMFLAGS_TRIPLE (0x03) > +#define MPI3_CTRL_PRIMFLAGS_REDUNDANT (0x06) > + > +typedef struct _MPI3_IOUNIT_CONTROL_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Reserved0A; /* 0x0A */ > + U8 Operation; /* 0x0B */ > + U32 Reserved0C; /* 0x0C */ > + U64 Param64[2]; /* 0x10 */ > + U32 Param32[4]; /* 0x20 */ > + U16 Param16[4]; /* 0x30 */ > + U8 Param8[8]; /* 0x38 */ > +} MPI3_IOUNIT_CONTROL_REQUEST, MPI3_POINTER PTR_MPI3_IOUNIT_CONTROL_REQUEST, > + Mpi3IoUnitControlRequest_t, MPI3_POINTER pMpi3IoUnitControlRequest_t; > + > + > +typedef struct _MPI3_IOUNIT_CONTROL_REPLY { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 IOCUseOnly08; /* 0x08 */ > + U16 IOCStatus; /* 0x0A */ > + U32 IOCLogInfo; /* 0x0C */ > + U64 Value64[2]; /* 0x10 */ > + U32 Value32[4]; /* 0x20 */ > + U16 Value16[4]; /* 0x30 */ > + U8 Value8[8]; /* 0x38 */ > +} MPI3_IOUNIT_CONTROL_REPLY, MPI3_POINTER PTR_MPI3_IOUNIT_CONTROL_REPLY, > + Mpi3IoUnitControlReply_t, MPI3_POINTER pMpi3IoUnitControlReply_t; > + > +#endif /* MPI30_IOC_H */ > diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_transport.h b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h > new file mode 100644 > index 000000000000..54f821d25209 > --- /dev/null > +++ b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h > @@ -0,0 +1,675 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Copyright 2016-2020 Broadcom Inc. All rights reserved. > + * > + * Name: mpi30_transport.h > + * Description: Contains definitions for System Interface Register Set, Scatter Gather Lists etc > + * Creation Date: 08/31/2016 > + * Version: 03.00.00 > + * > + * mpi3.h Version: 03.00.00.18 > + * > + * > + * Version History > + * --------------- > + * > + * Date Version Description > + * -------- ----------- ------------------------------------------------------ > + * 11-30-18 03.00.00.08 Corresponds to Fusion-MPT MPI 3.0 Specification Rev H. > + * 02-08-19 03.00.00.09 Corresponds to Fusion-MPT MPI 3.0 Specification Rev I. > + * 05-03-19 03.00.00.10 Corresponds to Fusion-MPT MPI 3.0 Specification Rev J. > + * 08-30-19 03.00.00.12 Corresponds to Fusion-MPT MPI 3.0 Specification Rev L. > + * 11-01-19 03.00.00.13 Corresponds to Fusion-MPT MPI 3.0 Specification Rev M. > + * 12-16-19 03.00.00.14 Corresponds to Fusion-MPT MPI 3.0 Specification Rev N. > + * 02-28-20 03.00.00.15 Corresponds to Fusion-MPT MPI 3.0 Specification Rev O. > + * 05-01-20 03.00.00.16 Corresponds to Fusion-MPT MPI 3.0 Specification Rev P. > + * 06-26-20 03.00.00.17 Corresponds to Fusion-MPT MPI 3.0 Specification Rev Q. > + * 08-28-20 03.00.00.18 Corresponds to Fusion-MPT MPI 3.0 Specification Rev R. > + */ > +#ifndef MPI30_TRANSPORT_H > +#define MPI30_TRANSPORT_H 1 > + > +/***************************************************************************** > + * Common version structure/union used in * > + * messages and configuration pages * > + ****************************************************************************/ > + > +typedef struct _MPI3_VERSION_STRUCT { > + U8 Dev; /* 0x00 */ > + U8 Unit; /* 0x01 */ > + U8 Minor; /* 0x02 */ > + U8 Major; /* 0x03 */ > +} MPI3_VERSION_STRUCT, MPI3_POINTER PTR_MPI3_VERSION_STRUCT, > + Mpi3VersionStruct, MPI3_POINTER pMpi3VersionStruct; > + > +typedef union _MPI3_VERSION_UNION { > + MPI3_VERSION_STRUCT Struct; > + U32 Word; > +} MPI3_VERSION_UNION, MPI3_POINTER PTR_MPI3_VERSION_UNION, > + Mpi3VersionUnion, MPI3_POINTER pMpi3VersionUnion; > + > +/****** Version constants for this revision ****/ > +#define MPI3_VERSION_MAJOR (3) > +#define MPI3_VERSION_MINOR (0) > +#define MPI3_VERSION_UNIT (0) > +#define MPI3_VERSION_DEV (18) > + > + > +/***************************************************************************** > + * System Interface Register Definitions * > + ****************************************************************************/ > +typedef struct _MPI3_SYSIF_OPER_QUEUE_INDEXES { > + U16 ProducerIndex; /* 0x00 */ > + U16 Reserved02; /* 0x02 */ > + U16 ConsumerIndex; /* 0x04 */ > + U16 Reserved06; /* 0x06 */ > +} MPI3_SYSIF_OPER_QUEUE_INDEXES, MPI3_POINTER PTR_MPI3_SYSIF_OPER_QUEUE_INDEXES; > + > +typedef volatile struct _MPI3_SYSIF_REGISTERS > +{ > + U64 IOCInformation; /* 0x00 */ > + MPI3_VERSION_UNION Version; /* 0x08 */ > + U32 Reserved0C[2]; /* 0x0C */ > + U32 IOCConfiguration; /* 0x14 */ > + U32 Reserved18; /* 0x18 */ > + U32 IOCStatus; /* 0x1C */ > + U32 Reserved20; /* 0x20 */ > + U32 AdminQueueNumEntries; /* 0x24 */ > + U64 AdminRequestQueueAddress; /* 0x28 */ > + U64 AdminReplyQueueAddress; /* 0x30 */ > + U32 Reserved38[2]; /* 0x38 */ > + U32 CoalesceControl; /* 0x40 */ > + U32 Reserved44[1007]; /* 0x44 */ > + U16 AdminRequestQueuePI; /* 0x1000 */ > + U16 Reserved1002; /* 0x1002 */ > + U16 AdminReplyQueueCI; /* 0x1004 */ > + U16 Reserved1006; /* 0x1006 */ > + MPI3_SYSIF_OPER_QUEUE_INDEXES OperQueueIndexes[383]; /* 0x1008 */ > + U32 Reserved1C00; /* 0x1C00 */ > + U32 WriteSequence; /* 0x1C04 */ > + U32 HostDiagnostic; /* 0x1C08 */ > + U32 Reserved1C0C; /* 0x1C0C */ > + U32 Fault; /* 0x1C10 */ > + U32 FaultInfo[3]; /* 0x1C14 */ > + U32 Reserved1C20[4]; /* 0x1C20 */ > + U64 HCBAddress; /* 0x1C30 */ > + U32 HCBSize; /* 0x1C38 */ > + U32 Reserved1C3C; /* 0x1C3C */ > + U32 ReplyFreeHostIndex; /* 0x1C40 */ > + U32 SenseBufferFreeHostIndex; /* 0x1C44 */ > + U32 Reserved1C48[2]; /* 0x1C48 */ > + U64 DiagRWData; /* 0x1C50 */ > + U64 DiagRWAddress; /* 0x1C58 */ > + U16 DiagRWControl; /* 0x1C60 */ > + U16 DiagRWStatus; /* 0x1C62 */ > + U32 Reserved1C64[35]; /* 0x1C64 */ > + U32 Scratchpad[4]; /* 0x1CF0 */ > + U32 Reserved1D00[192]; /* 0x1D00 */ > + U32 DeviceAssignedRegisters[2048]; /* 0x2000 */ > +} MPI3_SYSIF_REGS, MPI3_POINTER PTR_MPI3_SYSIF_REGS, > + Mpi3SysIfRegs_t, MPI3_POINTER pMpi3SysIfRegs_t; > + > +/**** Defines for the IOCInformation register ****/ > +#define MPI3_SYSIF_IOC_INFO_LOW_OFFSET (0x00000000) > +#define MPI3_SYSIF_IOC_INFO_HIGH_OFFSET (0x00000004) > +#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK (0xFF000000) > +#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_SHIFT (24) > + > +/**** Defines for the IOCConfiguration register ****/ > +#define MPI3_SYSIF_IOC_CONFIG_OFFSET (0x00000014) > +#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ (0x00F00000) > +#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ_SHIFT (20) > +#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ (0x000F0000) > +#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ_SHIFT (16) > +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_MASK (0x0000C000) > +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NO (0x00000000) > +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL (0x00004000) > +#define MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN (0x00002000) > +#define MPI3_SYSIF_IOC_CONFIG_DIAG_SAVE (0x00000010) > +#define MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC (0x00000001) > + > +/**** Defines for the IOCStatus register ****/ > +#define MPI3_SYSIF_IOC_STATUS_OFFSET (0x0000001C) > +#define MPI3_SYSIF_IOC_STATUS_RESET_HISTORY (0x00000010) > +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK (0x0000000C) > +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_NONE (0x00000000) > +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS (0x00000004) > +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_COMPLETE (0x00000008) > +#define MPI3_SYSIF_IOC_STATUS_FAULT (0x00000002) > +#define MPI3_SYSIF_IOC_STATUS_READY (0x00000001) > + > +/**** Defines for the AdminQueueNumEntries register ****/ > +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_OFFSET (0x00000024) > +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REQ_MASK (0x0FFF) > +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_OFFSET (0x00000026) > +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_MASK (0x0FFF0000) > +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_SHIFT (16) > + > +/**** Defines for the AdminRequestQueueAddress register ****/ > +#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_LOW_OFFSET (0x00000028) > +#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_HIGH_OFFSET (0x0000002C) > + > +/**** Defines for the AdminReplyQueueAddress register ****/ > +#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_LOW_OFFSET (0x00000030) > +#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_HIGH_OFFSET (0x00000034) > + > +/**** Defines for the CoalesceControl register ****/ > +#define MPI3_SYSIF_COALESCE_CONTROL_OFFSET (0x00000040) > +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_MASK (0xC0000000) > +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_NO_CHANGE (0x00000000) > +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_DISABLE (0x40000000) > +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_ENABLE (0xC0000000) > +#define MPI3_SYSIF_COALESCE_CONTROL_VALID (0x30000000) > +#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_MASK (0x00FF0000) > +#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_SHIFT (16) > +#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_MASK (0x0000FF00) > +#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_SHIFT (8) > +#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_MASK (0x000000FF) > +#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_SHIFT (0) > + > +/**** Defines for the AdminRequestQueuePI register ****/ > +#define MPI3_SYSIF_ADMIN_REQ_Q_PI_OFFSET (0x00001000) > + > +/**** Defines for the AdminReplyQueueCI register ****/ > +#define MPI3_SYSIF_ADMIN_REPLY_Q_CI_OFFSET (0x00001004) > + > +/**** Defines for the OperationalRequestQueuePI register */ > +#define MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET (0x00001008) > +#define MPI3_SYSIF_OPER_REQ_Q_N_PI_OFFSET(N) (MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET + (((N)-1)*8)) /* N = 1, 2, 3, ..., 255 */ > + > +/**** Defines for the OperationalReplyQueueCI register */ > +#define MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET (0x0000100C) > +#define MPI3_SYSIF_OPER_REPLY_Q_N_CI_OFFSET(N) (MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET + (((N)-1)*8)) /* N = 1, 2, 3, ..., 255 */ > + > +/**** Defines for the WriteSequence register *****/ > +#define MPI3_SYSIF_WRITE_SEQUENCE_OFFSET (0x00001C04) > +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_MASK (0x0000000F) > +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH (0x0) > +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST (0xF) > +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND (0x4) > +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD (0xB) > +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH (0x2) > +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH (0x7) > +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH (0xD) > + > +/**** Defines for the HostDiagnostic register *****/ > +#define MPI3_SYSIF_HOST_DIAG_OFFSET (0x00001C08) > +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_MASK (0x00000700) > +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_NO_RESET (0x00000000) > +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET (0x00000100) > +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_FLASH_RCVRY_RESET (0x00000200) > +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_COMPLETE_RESET (0x00000300) > +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT (0x00000700) > +#define MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS (0x00000080) > +#define MPI3_SYSIF_HOST_DIAG_SECURE_BOOT (0x00000040) > +#define MPI3_SYSIF_HOST_DIAG_CLEAR_INVALID_FW_IMAGE (0x00000020) > +#define MPI3_SYSIF_HOST_DIAG_INVALID_FW_IMAGE (0x00000010) > +#define MPI3_SYSIF_HOST_DIAG_HCBENABLE (0x00000008) > +#define MPI3_SYSIF_HOST_DIAG_HCBMODE (0x00000004) > +#define MPI3_SYSIF_HOST_DIAG_DIAG_RW_ENABLE (0x00000002) > +#define MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE (0x00000001) > + > +/**** Defines for the Fault register ****/ > +#define MPI3_SYSIF_FAULT_OFFSET (0x00001C10) > +#define MPI3_SYSIF_FAULT_FUNC_AREA_MASK (0xFF000000) > +#define MPI3_SYSIF_FAULT_FUNC_AREA_SHIFT (24) > +#define MPI3_SYSIF_FAULT_FUNC_AREA_MPI_DEFINED (0x00000000) > +#define MPI3_SYSIF_FAULT_CODE_MASK (0x0000FFFF) > +#define MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET (0x0000F000) > +#define MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET (0x0000F001) > +#define MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS (0x0000F002) > +#define MPI3_SYSIF_FAULT_CODE_COMPLETE_RESET_NEEDED (0x0000F003) > +#define MPI3_SYSIF_FAULT_CODE_SAFE_MODE_EXIT (0x0000F004) > +#define MPI3_SYSIF_FAULT_CODE_FACTORY_RESET (0x0000F005) > + > +/**** Defines for FaultCodeAdditionalInfo registers ****/ > +#define MPI3_SYSIF_FAULT_INFO0_OFFSET (0x00001C14) > +#define MPI3_SYSIF_FAULT_INFO1_OFFSET (0x00001C18) > +#define MPI3_SYSIF_FAULT_INFO2_OFFSET (0x00001C1C) > + > +/**** Defines for HCBAddress register ****/ > +#define MPI3_SYSIF_HCB_ADDRESS_LOW_OFFSET (0x00001C30) > +#define MPI3_SYSIF_HCB_ADDRESS_HIGH_OFFSET (0x00001C34) > + > +/**** Defines for HCBSize register ****/ > +#define MPI3_SYSIF_HCB_SIZE_OFFSET (0x00001C38) > +#define MPI3_SYSIF_HCB_SIZE_SIZE_MASK (0xFFFFF000) > +#define MPI3_SYSIF_HCB_SIZE_SIZE_SHIFT (12) > +#define MPI3_SYSIF_HCB_SIZE_HCDW_ENABLE (0x00000001) > + > +/**** Defines for ReplyFreeHostIndex register ****/ > +#define MPI3_SYSIF_REPLY_FREE_HOST_INDEX_OFFSET (0x00001C40) > + > +/**** Defines for SenseBufferFreeHostIndex register ****/ > +#define MPI3_SYSIF_SENSE_BUF_FREE_HOST_INDEX_OFFSET (0x00001C44) > + > +/**** Defines for DiagRWData register ****/ > +#define MPI3_SYSIF_DIAG_RW_DATA_LOW_OFFSET (0x00001C50) > +#define MPI3_SYSIF_DIAG_RW_DATA_HIGH_OFFSET (0x00001C54) > + > +/**** Defines for DiagRWAddress ****/ > +#define MPI3_SYSIF_DIAG_RW_ADDRESS_LOW_OFFSET (0x00001C58) > +#define MPI3_SYSIF_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00001C5C) > + > +/**** Defines for DiagRWControl register ****/ > +#define MPI3_SYSIF_DIAG_RW_CONTROL_OFFSET (0x00001C60) > +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_MASK (0x00000030) > +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_1BYTE (0x00000000) > +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_2BYTES (0x00000010) > +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_4BYTES (0x00000020) > +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_8BYTES (0x00000030) > +#define MPI3_SYSIF_DIAG_RW_CONTROL_RESET (0x00000004) > +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_MASK (0x00000002) > +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_READ (0x00000000) > +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_WRITE (0x00000002) > +#define MPI3_SYSIF_DIAG_RW_CONTROL_START (0x00000001) > + > +/**** Defines for DiagRWStatus register ****/ > +#define MPI3_SYSIF_DIAG_RW_STATUS_OFFSET (0x00001C62) > +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_MASK (0x0000000E) > +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_SUCCESS (0x00000000) > +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_INV_ADDR (0x00000002) > +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_ACC_ERR (0x00000004) > +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_PAR_ERR (0x00000006) > +#define MPI3_SYSIF_DIAG_RW_STATUS_BUSY (0x00000001) > + > +/**** Defines for Scratchpad registers ****/ > +#define MPI3_SYSIF_SCRATCHPAD0_OFFSET (0x00001CF0) > +#define MPI3_SYSIF_SCRATCHPAD1_OFFSET (0x00001CF4) > +#define MPI3_SYSIF_SCRATCHPAD2_OFFSET (0x00001CF8) > +#define MPI3_SYSIF_SCRATCHPAD3_OFFSET (0x00001CFC) > + > +/**** Defines for Device Assigned registers ****/ > +#define MPI3_SYSIF_DEVICE_ASSIGNED_REGS_OFFSET (0x00002000) > + > +/**** Default Defines for Diag Save Timeout ****/ > +#define MPI3_SYSIF_DIAG_SAVE_TIMEOUT (60) /* seconds */ > + > +/***************************************************************************** > + * Reply Descriptors * > + ****************************************************************************/ > + > +/***************************************************************************** > + * Default Reply Descriptor * > + ****************************************************************************/ > +typedef struct _MPI3_DEFAULT_REPLY_DESCRIPTOR { > + U32 DescriptorTypeDependent1[2]; /* 0x00 */ > + U16 RequestQueueCI; /* 0x08 */ > + U16 RequestQueueID; /* 0x0A */ > + U16 DescriptorTypeDependent2; /* 0x0C */ > + U16 ReplyFlags; /* 0x0E */ > +} MPI3_DEFAULT_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_DEFAULT_REPLY_DESCRIPTOR, > + Mpi3DefaultReplyDescriptor_t, MPI3_POINTER pMpi3DefaultReplyDescriptor_t; > + > +/**** Defines for the ReplyFlags field ****/ > +#define MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK (0x0001) > +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK (0xF000) > +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY (0x0000) > +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS (0x1000) > +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_TARGET_COMMAND_BUFFER (0x2000) > +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS (0x3000) > + > +/***************************************************************************** > + * Address Reply Descriptor * > + ****************************************************************************/ > +typedef struct _MPI3_ADDRESS_REPLY_DESCRIPTOR { > + U64 ReplyFrameAddress; /* 0x00 */ > + U16 RequestQueueCI; /* 0x08 */ > + U16 RequestQueueID; /* 0x0A */ > + U16 Reserved0C; /* 0x0C */ > + U16 ReplyFlags; /* 0x0E */ > +} MPI3_ADDRESS_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_ADDRESS_REPLY_DESCRIPTOR, > + Mpi3AddressReplyDescriptor_t, MPI3_POINTER pMpi3AddressReplyDescriptor_t; > + > +/***************************************************************************** > + * Success Reply Descriptor * > + ****************************************************************************/ > +typedef struct _MPI3_SUCCESS_REPLY_DESCRIPTOR { > + U32 Reserved00[2]; /* 0x00 */ > + U16 RequestQueueCI; /* 0x08 */ > + U16 RequestQueueID; /* 0x0A */ > + U16 HostTag; /* 0x0C */ > + U16 ReplyFlags; /* 0x0E */ > +} MPI3_SUCCESS_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_SUCCESS_REPLY_DESCRIPTOR, > + Mpi3SuccessReplyDescriptor_t, MPI3_POINTER pMpi3SuccessReplyDescriptor_t; > + > +/***************************************************************************** > + * Target Command Buffer Reply Descriptor * > + ****************************************************************************/ > +typedef struct _MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR { > + U32 Reserved00; /* 0x00 */ > + U16 InitiatorDevHandle; /* 0x04 */ > + U8 PhyNum; /* 0x06 */ > + U8 Reserved07; /* 0x07 */ > + U16 RequestQueueCI; /* 0x08 */ > + U16 RequestQueueID; /* 0x0A */ > + U16 IOIndex; /* 0x0C */ > + U16 ReplyFlags; /* 0x0E */ > +} MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, > + Mpi3TargetCommandBufferReplyDescriptor_t, MPI3_POINTER pMpi3TargetCommandBufferReplyDescriptor_t; > + > +/**** See Default Reply Descriptor Defines above for definitions in the ReplyFlags field ****/ > + > +/***************************************************************************** > + * Status Reply Descriptor * > + ****************************************************************************/ > +typedef struct _MPI3_STATUS_REPLY_DESCRIPTOR { > + U16 IOCStatus; /* 0x00 */ > + U16 Reserved02; /* 0x02 */ > + U32 IOCLogInfo; /* 0x04 */ > + U16 RequestQueueCI; /* 0x08 */ > + U16 RequestQueueID; /* 0x0A */ > + U16 HostTag; /* 0x0C */ > + U16 ReplyFlags; /* 0x0E */ > +} MPI3_STATUS_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_STATUS_REPLY_DESCRIPTOR, > + Mpi3StatusReplyDescriptor_t, MPI3_POINTER pMpi3StatusReplyDescriptor_t; > + > +/**** Defines for the IOCStatus field ****/ > +#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL (0x8000) > +#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK (0x7FFF) > + > +/**** Defines for the IOCLogInfo field ****/ > +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_MASK (0xF0000000) > +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_NO_INFO (0x00000000) > +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_SAS (0x30000000) > +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_DATA_MASK (0x0FFFFFFF) > + > +/***************************************************************************** > + * Union of Reply Descriptors * > + ****************************************************************************/ > +typedef union _MPI3_REPLY_DESCRIPTORS_UNION { > + MPI3_DEFAULT_REPLY_DESCRIPTOR Default; > + MPI3_ADDRESS_REPLY_DESCRIPTOR AddressReply; > + MPI3_SUCCESS_REPLY_DESCRIPTOR Success; > + MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; > + MPI3_STATUS_REPLY_DESCRIPTOR Status; > + U32 Words[4]; > +} MPI3_REPLY_DESCRIPTORS_UNION, MPI3_POINTER PTR_MPI3_REPLY_DESCRIPTORS_UNION, > + Mpi3ReplyDescriptorsUnion_t, MPI3_POINTER pMpi3ReplyDescriptorsUnion_t; > + > + > +/***************************************************************************** > + * Scatter Gather Elements * > + ****************************************************************************/ > + > +/***************************************************************************** > + * Common structure for Simple, Chain, and Last Chain * > + * scatter gather elements * > + ****************************************************************************/ > +typedef struct _MPI3_SGE_COMMON { > + U64 Address; /* 0x00 */ > + U32 Length; /* 0x08 */ > + U8 Reserved0C[3]; /* 0x0C */ > + U8 Flags; /* 0x0F */ > +} MPI3_SGE_SIMPLE, MPI3_POINTER PTR_MPI3_SGE_SIMPLE, > + Mpi3SGESimple_t, MPI3_POINTER pMpi3SGESimple_t, > + MPI3_SGE_CHAIN, MPI3_POINTER PTR_MPI3_SGE_CHAIN, > + Mpi3SGEChain_t, MPI3_POINTER pMpi3SGEChain_t, > + MPI3_SGE_LAST_CHAIN, MPI3_POINTER PTR_MPI3_SGE_LAST_CHAIN, > + Mpi3SGELastChain_t, MPI3_POINTER pMpi3SGELastChain_t; > + > +/***************************************************************************** > + * Bit Bucket scatter gather element * > + ****************************************************************************/ > +typedef struct _MPI3_SGE_BIT_BUCKET { > + U64 Reserved00; /* 0x00 */ > + U32 Length; /* 0x08 */ > + U8 Reserved0C[3]; /* 0x0C */ > + U8 Flags; /* 0x0F */ > +} MPI3_SGE_BIT_BUCKET, MPI3_POINTER PTR_MPI3_SGE_BIT_BUCKET, > + Mpi3SGEBitBucket, MPI3_POINTER pMpi3SGEBitBucket; > + > +/***************************************************************************** > + * Extended EEDP scatter gather element * > + ****************************************************************************/ > +typedef struct _MPI3_SGE_EXTENDED_EEDP { > + U8 UserDataSize; /* 0x00 */ > + U8 Reserved01; /* 0x01 */ > + U16 EEDPFlags; /* 0x02 */ > + U32 SecondaryReferenceTag; /* 0x04 */ > + U16 SecondaryApplicationTag; /* 0x08 */ > + U16 ApplicationTagTranslationMask; /* 0x0A */ > + U16 Reserved0C; /* 0x0C */ > + U8 ExtendedOperation; /* 0x0E */ > + U8 Flags; /* 0x0F */ > +} MPI3_SGE_EXTENDED_EEDP, MPI3_POINTER PTR_MPI3_SGE_EXTENDED_EEDP, > + Mpi3SGEExtendedEEDP_t, MPI3_POINTER pMpi3SGEExtendedEEDP_t; > + > +/***************************************************************************** > + * Union of scatter gather elements * > + ****************************************************************************/ > +typedef union _MPI3_SGE_UNION { > + MPI3_SGE_SIMPLE Simple; > + MPI3_SGE_CHAIN Chain; > + MPI3_SGE_LAST_CHAIN LastChain; > + MPI3_SGE_BIT_BUCKET BitBucket; > + MPI3_SGE_EXTENDED_EEDP Eedp; > + U32 Words[4]; > +} MPI3_SGE_UNION, MPI3_POINTER PTR_MPI3_SGE_UNION, > + Mpi3SGEUnion_t, MPI3_POINTER pMpi3SGEUnion_t; > + > +/**** Definitions for the Flags field ****/ > +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_MASK (0xF0) > +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE (0x00) > +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_BIT_BUCKET (0x10) > +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_CHAIN (0x20) > +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_LAST_CHAIN (0x30) > +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_EXTENDED (0xF0) > +#define MPI3_SGE_FLAGS_END_OF_LIST (0x08) > +#define MPI3_SGE_FLAGS_END_OF_BUFFER (0x04) > +#define MPI3_SGE_FLAGS_DLAS_MASK (0x03) > +#define MPI3_SGE_FLAGS_DLAS_SYSTEM (0x00) > +#define MPI3_SGE_FLAGS_DLAS_IOC_DDR (0x01) > +#define MPI3_SGE_FLAGS_DLAS_IOC_CTL (0x02) > + > +/**** Definitions for the ExtendedOperation field of Extended element ****/ > +#define MPI3_SGE_EXT_OPER_EEDP (0x00) > + > +/**** Definitions for the EEDPFlags field of Extended EEDP element ****/ > +#define MPI3_EEDPFLAGS_INCR_PRI_REF_TAG (0x8000) > +#define MPI3_EEDPFLAGS_INCR_SEC_REF_TAG (0x4000) > +#define MPI3_EEDPFLAGS_INCR_PRI_APP_TAG (0x2000) > +#define MPI3_EEDPFLAGS_INCR_SEC_APP_TAG (0x1000) > +#define MPI3_EEDPFLAGS_ESC_PASSTHROUGH (0x0800) > +#define MPI3_EEDPFLAGS_CHK_REF_TAG (0x0400) > +#define MPI3_EEDPFLAGS_CHK_APP_TAG (0x0200) > +#define MPI3_EEDPFLAGS_CHK_GUARD (0x0100) > +#define MPI3_EEDPFLAGS_ESC_MODE_MASK (0x00C0) > +#define MPI3_EEDPFLAGS_ESC_MODE_DO_NOT_DISABLE (0x0040) > +#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_DISABLE (0x0080) > +#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_REFTAG_DISABLE (0x00C0) > +#define MPI3_EEDPFLAGS_HOST_GUARD_MASK (0x0030) > +#define MPI3_EEDPFLAGS_HOST_GUARD_T10_CRC (0x0000) > +#define MPI3_EEDPFLAGS_HOST_GUARD_IP_CHKSUM (0x0010) > +#define MPI3_EEDPFLAGS_HOST_GUARD_OEM_SPECIFIC (0x0020) > +#define MPI3_EEDPFLAGS_PT_REF_TAG (0x0008) > +#define MPI3_EEDPFLAGS_EEDP_OP_MASK (0x0007) > +#define MPI3_EEDPFLAGS_EEDP_OP_NOOP (0x0000) > +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK (0x0001) > +#define MPI3_EEDPFLAGS_EEDP_OP_STRIP (0x0002) > +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REMOVE (0x0003) > +#define MPI3_EEDPFLAGS_EEDP_OP_INSERT (0x0004) > +#define MPI3_EEDPFLAGS_EEDP_OP_REPLACE (0x0006) > +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REGEN (0x0007) > + > +/**** Definitions for the UserDataSize field of Extended EEDP element ****/ > +#define MPI3_EEDP_UDS_512 (0x01) > +#define MPI3_EEDP_UDS_520 (0x02) > +#define MPI3_EEDP_UDS_4080 (0x03) > +#define MPI3_EEDP_UDS_4088 (0x04) > +#define MPI3_EEDP_UDS_4096 (0x05) > +#define MPI3_EEDP_UDS_4104 (0x06) > +#define MPI3_EEDP_UDS_4160 (0x07) > + > +/***************************************************************************** > + * Standard Message Structures * > + ****************************************************************************/ > + > +/***************************************************************************** > + * Request Message Header for all request messages * > + ****************************************************************************/ > +typedef struct _MPI3_REQUEST_HEADER { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 FunctionDependent; /* 0x0A */ > +} MPI3_REQUEST_HEADER, MPI3_POINTER PTR_MPI3_REQUEST_HEADER, > + Mpi3RequestHeader_t, MPI3_POINTER pMpi3RequestHeader_t; > + > +/***************************************************************************** > + * Default Reply * > + ****************************************************************************/ > +typedef struct _MPI3_DEFAULT_REPLY { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 IOCUseOnly08; /* 0x08 */ > + U16 IOCStatus; /* 0x0A */ > + U32 IOCLogInfo; /* 0x0C */ > +} MPI3_DEFAULT_REPLY, MPI3_POINTER PTR_MPI3_DEFAULT_REPLY, > + Mpi3DefaultReply_t, MPI3_POINTER pMpi3DefaultReply_t; > + > +/**** Defines for the HostTag field ****/ > +#define MPI3_HOST_TAG_INVALID (0xFFFF) > + > +/**** Defines for message Function ****/ > +/* I/O Controller functions */ > +#define MPI3_FUNCTION_IOC_FACTS (0x01) /* IOC Facts */ > +#define MPI3_FUNCTION_IOC_INIT (0x02) /* IOC Init */ > +#define MPI3_FUNCTION_PORT_ENABLE (0x03) /* Port Enable */ > +#define MPI3_FUNCTION_EVENT_NOTIFICATION (0x04) /* Event Notification */ > +#define MPI3_FUNCTION_EVENT_ACK (0x05) /* Event Acknowledge */ > +#define MPI3_FUNCTION_CI_DOWNLOAD (0x06) /* Component Image Download */ > +#define MPI3_FUNCTION_CI_UPLOAD (0x07) /* Component Image Upload */ > +#define MPI3_FUNCTION_IO_UNIT_CONTROL (0x08) /* IO Unit Control */ > +#define MPI3_FUNCTION_PERSISTENT_EVENT_LOG (0x09) /* Persistent Event Log */ > +#define MPI3_FUNCTION_MGMT_PASSTHROUGH (0x0A) /* Management Passthrough */ > +#define MPI3_FUNCTION_CONFIG (0x10) /* Configuration */ > + > +/* SCSI Initiator I/O functions */ > +#define MPI3_FUNCTION_SCSI_IO (0x20) /* SCSI IO */ > +#define MPI3_FUNCTION_SCSI_TASK_MGMT (0x21) /* SCSI Task Management */ > +#define MPI3_FUNCTION_SMP_PASSTHROUGH (0x22) /* SMP Passthrough */ > +#define MPI3_FUNCTION_NVME_ENCAPSULATED (0x24) /* NVMe Encapsulated */ > + > +/* SCSI Target I/O functions */ > +#define MPI3_FUNCTION_TARGET_ASSIST (0x30) /* Target Assist */ > +#define MPI3_FUNCTION_TARGET_STATUS_SEND (0x31) /* Target Status Send */ > +#define MPI3_FUNCTION_TARGET_MODE_ABORT (0x32) /* Target Mode Abort */ > +#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_BASE (0x33) /* Target Command Buffer Post Base */ > +#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_LIST (0x34) /* Target Command Buffer Post List */ > + > +/* Queue Management functions */ > +#define MPI3_FUNCTION_CREATE_REQUEST_QUEUE (0x70) /* Create an operational request queue */ > +#define MPI3_FUNCTION_DELETE_REQUEST_QUEUE (0x71) /* Delete an operational request queue */ > +#define MPI3_FUNCTION_CREATE_REPLY_QUEUE (0x72) /* Create an operational reply queue */ > +#define MPI3_FUNCTION_DELETE_REPLY_QUEUE (0x73) /* Delete an operational reply queue */ > + > +/* Diagnostic Tools */ > +#define MPI3_FUNCTION_TOOLBOX (0x80) /* Toolbox */ > +#define MPI3_FUNCTION_DIAG_BUFFER_POST (0x81) /* Post a Diagnostic Buffer to the I/O Unit */ > +#define MPI3_FUNCTION_DIAG_BUFFER_MANAGE (0x82) /* Manage a Diagnostic Buffer */ > +#define MPI3_FUNCTION_DIAG_BUFFER_UPLOAD (0x83) /* Upload a Diagnostic Buffer */ > + > +/* Miscellaneous functions */ > +#define MPI3_FUNCTION_MIN_IOC_USE_ONLY (0xC0) /* Beginning of IOC Use Only range of function codes */ > +#define MPI3_FUNCTION_MAX_IOC_USE_ONLY (0xEF) /* End of IOC Use Only range of function codes */ > +#define MPI3_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) /* Beginning of the product-specific range of function codes */ > +#define MPI3_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) /* End of the product-specific range of function codes */ > + > +/**** Defines for IOCStatus ****/ > +#define MPI3_IOCSTATUS_LOG_INFO_AVAIL_MASK (0x8000) > +#define MPI3_IOCSTATUS_LOG_INFO_AVAILABLE (0x8000) > +#define MPI3_IOCSTATUS_STATUS_MASK (0x7FFF) > + > +/* Common IOCStatus values for all replies */ > +#define MPI3_IOCSTATUS_SUCCESS (0x0000) > +#define MPI3_IOCSTATUS_INVALID_FUNCTION (0x0001) > +#define MPI3_IOCSTATUS_BUSY (0x0002) > +#define MPI3_IOCSTATUS_INVALID_SGL (0x0003) > +#define MPI3_IOCSTATUS_INTERNAL_ERROR (0x0004) > +#define MPI3_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) > +#define MPI3_IOCSTATUS_INVALID_FIELD (0x0007) > +#define MPI3_IOCSTATUS_INVALID_STATE (0x0008) > +#define MPI3_IOCSTATUS_INSUFFICIENT_POWER (0x000A) > +#define MPI3_IOCSTATUS_INVALID_CHANGE_COUNT (0x000B) > +#define MPI3_IOCSTATUS_FAILURE (0x001F) > + > +/* Config IOCStatus values */ > +#define MPI3_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) > +#define MPI3_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) > +#define MPI3_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) > +#define MPI3_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) > +#define MPI3_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) > +#define MPI3_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) > + > +/* SCSI IO IOCStatus values */ > +#define MPI3_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) > +#define MPI3_IOCSTATUS_SCSI_TM_NOT_SUPPORTED (0x0041) > +#define MPI3_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042) > +#define MPI3_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) > +#define MPI3_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) > +#define MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) > +#define MPI3_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) > +#define MPI3_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) > +#define MPI3_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) > +#define MPI3_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) > +#define MPI3_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) > +#define MPI3_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) > +#define MPI3_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) > + > +/* SCSI Initiator and SCSI Target end-to-end data protection values */ > +#define MPI3_IOCSTATUS_EEDP_GUARD_ERROR (0x004D) > +#define MPI3_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E) > +#define MPI3_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) > + > +/* SCSI Target IOCStatus values */ > +#define MPI3_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) > +#define MPI3_IOCSTATUS_TARGET_ABORTED (0x0063) > +#define MPI3_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) > +#define MPI3_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) > +#define MPI3_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) > +#define MPI3_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) > +#define MPI3_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) > +#define MPI3_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) > +#define MPI3_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070) > +#define MPI3_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071) > + > +/* Serial Attached SCSI IOCStatus values */ > +#define MPI3_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) > +#define MPI3_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091) > + > +/* Diagnostic Buffer Post/Release IOCStatus values */ > +#define MPI3_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) > + > +/* Component Image Upload/Download */ > +#define MPI3_IOCSTATUS_CI_UNSUPPORTED (0x00B0) > +#define MPI3_IOCSTATUS_CI_UPDATE_SEQUENCE (0x00B1) > +#define MPI3_IOCSTATUS_CI_VALIDATION_FAILED (0x00B2) > +#define MPI3_IOCSTATUS_CI_UPDATE_PENDING (0x00B3) > + > +/* Security values */ > +#define MPI3_IOCSTATUS_SECURITY_KEY_REQUIRED (0x00C0) > + > +/* Request and Reply Queues related IOCStatus values */ > +#define MPI3_IOCSTATUS_INVALID_QUEUE_ID (0x0F00) > +#define MPI3_IOCSTATUS_INVALID_QUEUE_SIZE (0x0F01) > +#define MPI3_IOCSTATUS_INVALID_MSIX_VECTOR (0x0F02) > +#define MPI3_IOCSTATUS_INVALID_REPLY_QUEUE_ID (0x0F03) > +#define MPI3_IOCSTATUS_INVALID_QUEUE_DELETION (0x0F04) > + > +/**** Defines for IOCLogInfo ****/ > +#define MPI3_IOCLOGINFO_TYPE_MASK (0xF0000000) > +#define MPI3_IOCLOGINFO_TYPE_SHIFT (28) > +#define MPI3_IOCLOGINFO_TYPE_NONE (0x0) > +#define MPI3_IOCLOGINFO_TYPE_SAS (0x3) > +#define MPI3_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) > + > +#endif /* MPI30_TRANSPORT_H */ > diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_type.h b/drivers/scsi/mpi3mr/mpi/mpi30_type.h > new file mode 100644 > index 000000000000..fbd37288a5d0 > --- /dev/null > +++ b/drivers/scsi/mpi3mr/mpi/mpi30_type.h > @@ -0,0 +1,47 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Copyright 2016-2020 Broadcom Inc. All rights reserved. > + * > + * Name: mpi30_type.h > + * Description: MPI basic type definitions > + * Creation Date: 10/07/2016 > + * Version: 03.00.00 > + */ > +#ifndef MPI30_TYPE_H > +#define MPI30_TYPE_H 1 > + > +/***************************************************************************** > + * Define MPI3_POINTER if it has not already been defined. By default * > + * MPI3_POINTER is defined to be a near pointer. MPI3_POINTER can be defined * > + * as a far pointer by defining MPI3_POINTER as "far *" before this header * > + * file is included. * > + ****************************************************************************/ > +#ifndef MPI3_POINTER > +#define MPI3_POINTER * > +#endif /* MPI3_POINTER */ > + > +/* The basic types may have already been included by mpi_type.h or mpi2_type.h*/ > +#if !defined(MPI_TYPE_H) && !defined(MPI2_TYPE_H) > +/***************************************************************************** > +* > +* Basic Types > +* > +*****************************************************************************/ > + > +typedef u8 U8; > +typedef __le16 U16; > +typedef __le32 U32; > +typedef __le64 U64 __aligned(4); > + > +/***************************************************************************** > +* > +* Pointer Types > +* > +*****************************************************************************/ > + > +typedef U8 * PU8; > +typedef U16 * PU16; > +typedef U32 * PU32; > +typedef U64 * PU64; > +#endif /* MPI_TYPE_H && MPI2_TYPE_H */ > +#endif /* MPI30_TYPE_H */ >

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 06b87c7f6bab..1f06811740a7 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -482,6 +482,7 @@ config SCSI_ARCMSR source "drivers/scsi/esas2r/Kconfig" source "drivers/scsi/megaraid/Kconfig.megaraid" source "drivers/scsi/mpt3sas/Kconfig" +source "drivers/scsi/mpi3mr/Kconfig" source "drivers/scsi/smartpqi/Kconfig" source "drivers/scsi/ufs/Kconfig" diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index bc3882f5cc69..06f2d5fab899 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -99,6 +99,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ obj-$(CONFIG_MEGARAID_SAS) += megaraid/ obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/ +obj-$(CONFIG_SCSI_MPI3MR) += mpi3mr/ obj-$(CONFIG_SCSI_UFSHCD) += ufs/ obj-$(CONFIG_SCSI_ACARD) += atp870u.o obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o diff --git a/drivers/scsi/mpi3mr/Kconfig b/drivers/scsi/mpi3mr/Kconfig new file mode 100644 index 000000000000..2d0568dd176a --- /dev/null +++ b/drivers/scsi/mpi3mr/Kconfig @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +config SCSI_MPI3MR + tristate "Broadcom MPI3 Storage Controller Device Driver" + depends on PCI && SCSI + help + This driver supports Broadcom's Unified MPI3 based Storage & RAID Controllers. diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h new file mode 100644 index 000000000000..46dd30ccb5f9 --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2019-2020 Broadcom Inc. All rights reserved. + * + * Name: mpi30_api.h + * Description: Root header that include all other MPI 3.0 headers + * Developers need to only include this header to gain + * access to the full MPI3.0 API definitions. + * Creation Date: 04/15/2019 + * Version: 03.00.00 + */ +#ifndef MPI30_API_H +#define MPI30_API_H 1 + +#include "mpi30_type.h" +#include "mpi30_transport.h" +#include "mpi30_image.h" +#include "mpi30_init.h" +#include "mpi30_ioc.h" + +#endif /* MPI30_API_H */ diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_image.h b/drivers/scsi/mpi3mr/mpi/mpi30_image.h new file mode 100644 index 000000000000..430662d3a43b --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi/mpi30_image.h @@ -0,0 +1,285 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2018-2020 Broadcom Inc. All rights reserved. + * + * Name: mpi30_image.h + * Description: Contains definitions for firmware and other component images. + * Creation Date: 04/02/2018 + * Version: 03.00.00 + */ +#ifndef MPI30_IMAGE_H +#define MPI30_IMAGE_H 1 + +/* Component Image Version */ +typedef struct _MPI3_COMP_IMAGE_VERSION { + U16 BuildNum; /* 0x00 */ + U16 CustomerID; /* 0x02 */ + U8 PhaseMinor; /* 0x04 */ + U8 PhaseMajor; /* 0x05 */ + U8 GenMinor; /* 0x06 */ + U8 GenMajor; /* 0x07 */ +} MPI3_COMP_IMAGE_VERSION, MPI3_POINTER PTR_MPI3_COMP_IMAGE_VERSION, + Mpi3CompImageVersion, MPI3_POINTER pMpi3CompImageVersion; + +/* Hash Exclusion Format */ +typedef struct _MPI3_HASH_EXCLUSION_FORMAT { + U32 Offset; /* 0x00 */ + U32 Size; /* 0x04 */ +} MPI3_HASH_EXCLUSION_FORMAT, MPI3_POINTER PTR_MPI3_HASH_EXCLUSION_FORMAT, +Mpi3HashSxclusionFormat_t, MPI3_POINTER pMpi3HashExclusionFormat_t; + +#define MPI3_IMAGE_HASH_EXCUSION_NUM (4) + +/* FW Image Header */ +typedef struct _MPI3_COMPONENT_IMAGE_HEADER { + U32 Signature0; /* 0x00 */ + U32 LoadAddress; /* 0x04 */ + U32 DataSize; /* 0x08 */ + U32 StartOffset; /* 0x0C */ + U32 Signature1; /* 0x10 */ + U32 FlashOffset; /* 0x14 */ + U32 ImageSize; /* 0x18 */ + U32 VersionStringOffset; /* 0x1C */ + U32 BuildDateStringOffset; /* 0x20 */ + U32 BuildTimeStringOffset; /* 0x24 */ + U32 EnvironmentVariableOffset; /* 0x28 */ + U32 ApplicationSpecific; /* 0x2C */ + U32 Signature2; /* 0x30 */ + U32 HeaderSize; /* 0x34 */ + U32 Crc; /* 0x38 */ + U32 Flags; /* 0x3C */ + U32 SecondaryFlashOffset; /* 0x40 */ + U32 ETPOffset; /* 0x44 */ + U32 ETPSize; /* 0x48 */ + MPI3_VERSION_UNION RMCInterfaceVersion; /* 0x4C */ + MPI3_VERSION_UNION ETPInterfaceVersion; /* 0x50 */ + MPI3_COMP_IMAGE_VERSION ComponentImageVersion; /* 0x54 */ + MPI3_HASH_EXCLUSION_FORMAT HashExclusion[MPI3_IMAGE_HASH_EXCUSION_NUM]; /* 0x5C */ + U32 NextImageHeaderOffset; /* 0x7C */ + MPI3_VERSION_UNION SecurityVersion; /* 0x80 */ + U32 Reserved84[31]; /* 0x84 -- 0xFC */ +} MPI3_COMPONENT_IMAGE_HEADER, MPI3_POINTER PTR_MPI3_COMPONENT_IMAGE_HEADER, + Mpi3ComponentImageHeader_t, MPI3_POINTER pMpi3ComponentImageHeader_t; + + +/**** Definitions for Signature0 field ****/ +#define MPI3_IMAGE_HEADER_SIGNATURE0_MPI3 (0xEB00003E) + +/**** Definitions for LoadAddress field ****/ +#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_INVALID (0x00000000) + +/**** Definitions for Signature1 field ****/ +#define MPI3_IMAGE_HEADER_SIGNATURE1_APPLICATION (0x20505041) /* string "APP " */ +#define MPI3_IMAGE_HEADER_SIGNATURE1_FIRST_MUTABLE (0x20434D46) /* string "FMC " */ +#define MPI3_IMAGE_HEADER_SIGNATURE1_BSP (0x20505342) /* string "BSP " */ +#define MPI3_IMAGE_HEADER_SIGNATURE1_ROM_BIOS (0x534F4942) /* string "BIOS" */ +#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_X64 (0x4D494948) /* string "HIIM" */ +#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_ARM (0x41494948) /* string "HIIA" */ +#define MPI3_IMAGE_HEADER_SIGNATURE1_CPLD (0x444C5043) /* string "CPLD" */ +#define MPI3_IMAGE_HEADER_SIGNATURE1_SPD (0x20445053) /* string "SPD " */ +#define MPI3_IMAGE_HEADER_SIGNATURE1_GAS_GAUGE (0x20534147) /* string "GAS " */ +#define MPI3_IMAGE_HEADER_SIGNATURE1_PBLP (0x504C4250) /* string "PBLP" */ + +/**** Definitions for Signature2 field ****/ +#define MPI3_IMAGE_HEADER_SIGNATURE2_VALUE (0x50584546) + +/**** Definitions for Flags field ****/ +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_MASK (0x00000030) +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_CDI (0x00000000) +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_DI (0x00000010) +#define MPI3_IMAGE_HEADER_FLAGS_SIGNED_NVDATA (0x00000008) +#define MPI3_IMAGE_HEADER_FLAGS_REQUIRES_ACTIVATION (0x00000004) +#define MPI3_IMAGE_HEADER_FLAGS_COMPRESSED (0x00000002) +#define MPI3_IMAGE_HEADER_FLAGS_FLASH (0x00000001) + + +/**** Offsets for Image Header Fields ****/ +#define MPI3_IMAGE_HEADER_SIGNATURE0_OFFSET (0x00) +#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_OFFSET (0x04) +#define MPI3_IMAGE_HEADER_DATA_SIZE_OFFSET (0x08) +#define MPI3_IMAGE_HEADER_START_OFFSET_OFFSET (0x0C) +#define MPI3_IMAGE_HEADER_SIGNATURE1_OFFSET (0x10) +#define MPI3_IMAGE_HEADER_FLASH_OFFSET_OFFSET (0x14) +#define MPI3_IMAGE_HEADER_FLASH_SIZE_OFFSET (0x18) +#define MPI3_IMAGE_HEADER_VERSION_STRING_OFFSET_OFFSET (0x1C) +#define MPI3_IMAGE_HEADER_BUILD_DATE_STRING_OFFSET_OFFSET (0x20) +#define MPI3_IMAGE_HEADER_BUILD_TIME_OFFSET_OFFSET (0x24) +#define MPI3_IMAGE_HEADER_ENVIROMENT_VAR_OFFSET_OFFSET (0x28) +#define MPI3_IMAGE_HEADER_APPLICATION_SPECIFIC_OFFSET (0x2C) +#define MPI3_IMAGE_HEADER_SIGNATURE2_OFFSET (0x30) +#define MPI3_IMAGE_HEADER_HEADER_SIZE_OFFSET (0x34) +#define MPI3_IMAGE_HEADER_CRC_OFFSET (0x38) +#define MPI3_IMAGE_HEADER_FLAGS_OFFSET (0x3C) +#define MPI3_IMAGE_HEADER_SECONDARY_FLASH_OFFSET_OFFSET (0x40) +#define MPI3_IMAGE_HEADER_ETP_OFFSET_OFFSET (0x44) +#define MPI3_IMAGE_HEADER_ETP_SIZE_OFFSET (0x48) +#define MPI3_IMAGE_HEADER_RMC_INTERFACE_VER_OFFSET (0x4C) +#define MPI3_IMAGE_HEADER_ETP_INTERFACE_VER_OFFSET (0x50) +#define MPI3_IMAGE_HEADER_COMPONENT_IMAGE_VER_OFFSET (0x54) +#define MPI3_IMAGE_HEADER_HASH_EXCLUSION_OFFSET (0x5C) +#define MPI3_IMAGE_HEADER_NEXT_IMAGE_HEADER_OFFSET_OFFSET (0x7C) + + +#define MPI3_IMAGE_HEADER_SIZE (0x100) + + +/* Extended Image Header */ +typedef struct _MPI3_EXTENDED_IMAGE_HEADER { + U8 ImageType; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ + U32 Checksum; /* 0x04 */ + U32 ImageSize; /* 0x08 */ + U32 NextImageHeaderOffset; /* 0x0C */ + U32 Reserved10[4]; /* 0x10 */ + U32 IdentifyString[8]; /* 0x20 */ +} MPI3_EXTENDED_IMAGE_HEADER, MPI3_POINTER PTR_MPI3_EXTENDED_IMAGE_HEADER, + Mpi3ExtendedImageHeader_t, MPI3_POINTER pMpi3ExtendedImageHeader_t; + +/* useful offsets */ +#define MPI3_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) +#define MPI3_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) +#define MPI3_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) + +#define MPI3_EXT_IMAGE_HEADER_SIZE (0x40) + +/* defines for the ImageType field */ +#define MPI3_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) +#define MPI3_EXT_IMAGE_TYPE_NVDATA (0x03) +#define MPI3_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) +#define MPI3_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09) +#define MPI3_EXT_IMAGE_TYPE_RDE (0x0A) +#define MPI3_EXT_IMAGE_TYPE_AUXILIARY_PROCESSOR (0x0B) +#define MPI3_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI3_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) + + +/* Supported Device Data Format */ +typedef struct _MPI3_SUPPORTED_DEVICE { + U16 DeviceID; /* 0x00 */ + U16 VendorID; /* 0x02 */ + U16 DeviceIDMask; /* 0x04 */ + U16 Reserved06; /* 0x06 */ + U8 LowPCIRev; /* 0x08 */ + U8 HighPCIRev; /* 0x09 */ + U16 Reserved0A; /* 0x0A */ + U32 Reserved0C; /* 0x0C */ +} MPI3_SUPPORTED_DEVICE, MPI3_POINTER PTR_MPI3_SUPPORTED_DEVICE, + Mpi3SupportedDevice_t, MPI3_POINTER pMpi3SupportedDevice_t; + +#ifndef MPI3_SUPPORTED_DEVICE_MAX +#define MPI3_SUPPORTED_DEVICE_MAX (1) +#endif /* MPI3_SUPPORTED_DEVICE_MAX */ + +/* Supported Devices Extended Image Data */ +typedef struct _MPI3_SUPPORTED_DEVICES_DATA { + U8 ImageVersion; /* 0x00 */ + U8 Reserved01; /* 0x01 */ + U8 NumDevices; /* 0x02 */ + U8 Reserved03; /* 0x03 */ + U32 Reserved04; /* 0x04 */ + MPI3_SUPPORTED_DEVICE SupportedDevice[MPI3_SUPPORTED_DEVICE_MAX]; /* 0x08 */ /* variable length */ +} MPI3_SUPPORTED_DEVICES_DATA, MPI3_POINTER PTR_MPI3_SUPPORTED_DEVICES_DATA, + Mpi3SupportedDevicesData_t, MPI3_POINTER pMpi3SupportedDevicesData_t; + +#ifndef MPI3_ENCRYPTED_HASH_MAX +#define MPI3_ENCRYPTED_HASH_MAX (1) +#endif /* MPI3_ENCRYPTED_HASH_MAX */ + +/* Encrypted Hash Entry Format */ +typedef struct _MPI3_ENCRYPTED_HASH_ENTRY { + U8 HashImageType; /* 0x00 */ + U8 HashAlgorithm; /* 0x01 */ + U8 EncryptionAlgorithm; /* 0x02 */ + U8 Reserved03; /* 0x03 */ + U32 Reserved04; /* 0x04 */ + U32 EncryptedHash[MPI3_ENCRYPTED_HASH_MAX]; /* 0x08 */ /* variable length */ +} MPI3_ENCRYPTED_HASH_ENTRY, MPI3_POINTER PTR_MPI3_ENCRYPTED_HASH_ENTRY, + Mpi3EncryptedHashEntry_t, MPI3_POINTER pMpi3EncryptedHashEntry_t; + + +/* defines for the HashImageType field */ +#define MPI3_HASH_IMAGE_TYPE_KEY_WITH_SIGNATURE (0x03) + +/* defines for the HashAlgorithm field */ +#define MPI3_HASH_ALGORITHM_VERSION_MASK (0xE0) +#define MPI3_HASH_ALGORITHM_VERSION_NONE (0x00) +#define MPI3_HASH_ALGORITHM_VERSION_SHA1 (0x20) /* Obsolete */ +#define MPI3_HASH_ALGORITHM_VERSION_SHA2 (0x40) +#define MPI3_HASH_ALGORITHM_VERSION_SHA3 (0x60) + +#define MPI3_HASH_ALGORITHM_SIZE_MASK (0x1F) +#define MPI3_HASH_ALGORITHM_SIZE_UNUSED (0x00) +#define MPI3_HASH_ALGORITHM_SIZE_SHA256 (0x01) +#define MPI3_HASH_ALGORITHM_SIZE_SHA512 (0x02) + +/* defines for the EncryptionAlgorithm field */ +#define MPI3_ENCRYPTION_ALGORITHM_UNUSED (0x00) +#define MPI3_ENCRYPTION_ALGORITHM_RSA256 (0x01) /* Obsolete */ +#define MPI3_ENCRYPTION_ALGORITHM_RSA512 (0x02) /* Obsolete */ +#define MPI3_ENCRYPTION_ALGORITHM_RSA1024 (0x03) /* Obsolete */ +#define MPI3_ENCRYPTION_ALGORITHM_RSA2048 (0x04) +#define MPI3_ENCRYPTION_ALGORITHM_RSA4096 (0x05) +#define MPI3_ENCRYPTION_ALGORITHM_RSA3072 (0x06) + + +#ifndef MPI3_PUBLIC_KEY_MAX +#define MPI3_PUBLIC_KEY_MAX (1) +#endif /* MPI3_PUBLIC_KEY_MAX */ + +/* Encrypted Key with Hash Entry Format */ +typedef struct _MPI3_ENCRYPTED_KEY_WITH_HASH_ENTRY { + U8 HashImageType; /* 0x00 */ + U8 HashAlgorithm; /* 0x01 */ + U8 EncryptionAlgorithm; /* 0x02 */ + U8 Reserved03; /* 0x03 */ + U32 Reserved04; /* 0x04 */ + U32 PublicKey[MPI3_PUBLIC_KEY_MAX]; /* 0x08 */ /* variable length */ + U32 EncryptedHash[MPI3_ENCRYPTED_HASH_MAX]; /* 0x0C */ /* variable length */ +} MPI3_ENCRYPTED_KEY_WITH_HASH_ENTRY, MPI3_POINTER PTR_MPI3_ENCRYPTED_KEY_WITH_HASH_ENTRY, + Mpi3EncryptedKeyWithHashEntry_t, MPI3_POINTER pMpi3EncryptedKeyWithHashEntry_t; + +#ifndef MPI3_ENCRYPTED_HASH_ENTRY_MAX +#define MPI3_ENCRYPTED_HASH_ENTRY_MAX (1) +#endif /* MPI3_ENCRYPTED_HASH_ENTRY_MAX */ + +/* Encrypted Hash Image Data */ +typedef struct _MPI3_ENCRYPTED_HASH_DATA { + U8 ImageVersion; /* 0x00 */ + U8 NumHash; /* 0x01 */ + U16 Reserved02; /* 0x02 */ + U32 Reserved04; /* 0x04 */ + MPI3_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[MPI3_ENCRYPTED_HASH_ENTRY_MAX]; /* 0x08 */ /* variable length */ +} MPI3_ENCRYPTED_HASH_DATA, MPI3_POINTER PTR_MPI3_ENCRYPTED_HASH_DATA, + Mpi3EncryptedHashData_t, MPI3_POINTER pMpi3EncryptedHashData_t; + + +#ifndef MPI3_AUX_PROC_DATA_MAX +#define MPI3_AUX_PROC_DATA_MAX (1) +#endif /* MPI3_ENCRYPTED_HASH_ENTRY_MAX */ + +/* Auxiliary Processor Extended Image Data */ +typedef struct _MPI3_AUX_PROCESSOR_DATA { + U8 BootMethod; /* 0x00 */ + U8 NumLoadAddr; /* 0x01 */ + U8 Reserved02; /* 0x02 */ + U8 Type; /* 0x03 */ + U32 Version; /* 0x04 */ + U32 LoadAddress[8]; /* 0x08 */ + U32 Reserved28[22]; /* 0x28 */ + U32 AuxProcessorData[MPI3_AUX_PROC_DATA_MAX]; /* 0x80 */ /* variable length */ +} MPI3_AUX_PROCESSOR_DATA, MPI3_POINTER PTR_MPI3_AUX_PROCESSOR_DATA, + Mpi3AuxProcessorData_t, MPI3_POINTER pMpi3AuxProcessorData_t; + +#define MPI3_AUX_PROC_DATA_OFFSET (0x80) + +/* defines for the BootMethod field */ +#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_MSG (0x00) +#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_DOORBELL (0x01) +#define MPI3_AUXPROCESSOR_BOOT_METHOD_COMPONENT (0x02) + +/* defines for the Type field */ +#define MPI3_AUXPROCESSOR_TYPE_ARM_A15 (0x00) +#define MPI3_AUXPROCESSOR_TYPE_ARM_M0 (0x01) +#define MPI3_AUXPROCESSOR_TYPE_ARM_R4 (0x02) + +#endif /* MPI30_IMAGE_H */ diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_init.h b/drivers/scsi/mpi3mr/mpi/mpi30_init.h new file mode 100644 index 000000000000..a0222f0fc9a8 --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi/mpi30_init.h @@ -0,0 +1,216 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2016-2020 Broadcom Inc. All rights reserved. + * + * Name: mpi30_init.h + * Description: Contains definitions for SCSI initiator mode messages and structures. + * Creation Date: 10/27/2016 + * Version: 03.00.00 + */ +#ifndef MPI30_INIT_H +#define MPI30_INIT_H 1 + +/***************************************************************************** + * SCSI Initiator Messages * + ****************************************************************************/ + +/***************************************************************************** + * SCSI IO Request Message * + ****************************************************************************/ +typedef struct _MPI3_SCSI_IO_CDB_EEDP32 { + U8 CDB[20]; /* 0x00 */ + __be32 PrimaryReferenceTag; /* 0x14 */ + U16 PrimaryApplicationTag; /* 0x18 */ + U16 PrimaryApplicationTagMask; /* 0x1A */ + U32 TransferLength; /* 0x1C */ +} MPI3_SCSI_IO_CDB_EEDP32, MPI3_POINTER PTR_MPI3_SCSI_IO_CDB_EEDP32, + Mpi3ScsiIoCdbEedp32_t, MPI3_POINTER pMpi3ScsiIoCdbEedp32_t; + +typedef union _MPI3_SCSO_IO_CDB_UNION { + U8 CDB32[32]; + MPI3_SCSI_IO_CDB_EEDP32 EEDP32; + MPI3_SGE_SIMPLE SGE; +} MPI3_SCSO_IO_CDB_UNION, MPI3_POINTER PTR_MPI3_SCSO_IO_CDB_UNION, + Mpi3ScsiIoCdb_t, MPI3_POINTER pMpi3ScsiIoCdb_t; + +typedef struct _MPI3_SCSI_IO_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 DevHandle; /* 0x0A */ + U32 Flags; /* 0x0C */ + U32 SkipCount; /* 0x10 */ + U32 DataLength; /* 0x14 */ + U8 LUN[8]; /* 0x18 */ + MPI3_SCSO_IO_CDB_UNION CDB; /* 0x20 */ + MPI3_SGE_UNION SGL[4]; /* 0x40 */ +} MPI3_SCSI_IO_REQUEST, MPI3_POINTER PTR_MPI3_SCSI_IO_REQUEST, + Mpi3SCSIIORequest_t, MPI3_POINTER pMpi3SCSIIORequest_t; + +/**** Defines for the MsgFlags field ****/ +#define MPI3_SCSIIO_MSGFLAGS_METASGL_VALID (0x80) + +/**** Defines for the Flags field ****/ +#define MPI3_SCSIIO_FLAGS_LARGE_CDB (0x60000000) +#define MPI3_SCSIIO_FLAGS_CDB_16_OR_LESS (0x00000000) +#define MPI3_SCSIIO_FLAGS_CDB_GREATER_THAN_16 (0x20000000) +#define MPI3_SCSIIO_FLAGS_CDB_IN_SEPARATE_BUFFER (0x40000000) +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_MASK (0x07000000) +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_SIMPLEQ (0x00000000) +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_HEADOFQ (0x01000000) +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ORDEREDQ (0x02000000) +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ACAQ (0x04000000) +#define MPI3_SCSIIO_FLAGS_CMDPRI_MASK (0x00F00000) +#define MPI3_SCSIIO_FLAGS_CMDPRI_SHIFT (20) +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_MASK (0x000C0000) +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_NO_DATA_TRANSFER (0x00000000) +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_WRITE (0x00040000) +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_READ (0x00080000) +#define MPI3_SCSIIO_FLAGS_DMAOPERATION_MASK (0x00030000) +#define MPI3_SCSIIO_FLAGS_DMAOPERATION_HOST_PI (0x00010000) + +/**** Defines for the SGL field ****/ +#define MPI3_SCSIIO_METASGL_INDEX (3) + +/***************************************************************************** + * SCSI IO Error Reply Message * + ****************************************************************************/ +typedef struct _MPI3_SCSI_IO_REPLY { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 IOCUseOnly08; /* 0x08 */ + U16 IOCStatus; /* 0x0A */ + U32 IOCLogInfo; /* 0x0C */ + U8 SCSIStatus; /* 0x10 */ + U8 SCSIState; /* 0x11 */ + U16 DevHandle; /* 0x12 */ + U32 TransferCount; /* 0x14 */ + U32 SenseCount; /* 0x18 */ + U32 ResponseData; /* 0x1C */ + U16 TaskTag; /* 0x20 */ + U16 SCSIStatusQualifier; /* 0x22 */ + U32 EEDPErrorOffset; /* 0x24 */ + U16 EEDPObservedAppTag; /* 0x28 */ + U16 EEDPObservedGuard; /* 0x2A */ + U32 EEDPObservedRefTag; /* 0x2C */ + U64 SenseDataBufferAddress; /* 0x30 */ +} MPI3_SCSI_IO_REPLY, MPI3_POINTER PTR_MPI3_SCSI_IO_REPLY, + Mpi3SCSIIOReply_t, MPI3_POINTER pMpi3SCSIIOReply_t; + +/**** Defines for the MsgFlags field ****/ +#define MPI3_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01) +#define MPI3_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x02) +#define MPI3_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x04) + +/**** Defines for the SCSIStatus field ****/ +#define MPI3_SCSI_STATUS_GOOD (0x00) +#define MPI3_SCSI_STATUS_CHECK_CONDITION (0x02) +#define MPI3_SCSI_STATUS_CONDITION_MET (0x04) +#define MPI3_SCSI_STATUS_BUSY (0x08) +#define MPI3_SCSI_STATUS_INTERMEDIATE (0x10) +#define MPI3_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) +#define MPI3_SCSI_STATUS_RESERVATION_CONFLICT (0x18) +#define MPI3_SCSI_STATUS_COMMAND_TERMINATED (0x22) +#define MPI3_SCSI_STATUS_TASK_SET_FULL (0x28) +#define MPI3_SCSI_STATUS_ACA_ACTIVE (0x30) +#define MPI3_SCSI_STATUS_TASK_ABORTED (0x40) + +/**** Defines for the SCSIState field ****/ +#define MPI3_SCSI_STATE_SENSE_MASK (0x03) +#define MPI3_SCSI_STATE_SENSE_VALID (0x00) +#define MPI3_SCSI_STATE_SENSE_FAILED (0x01) +#define MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY (0x02) +#define MPI3_SCSI_STATE_SENSE_NOT_AVAILABLE (0x03) +#define MPI3_SCSI_STATE_NO_SCSI_STATUS (0x04) +#define MPI3_SCSI_STATE_TERMINATED (0x08) +#define MPI3_SCSI_STATE_RESPONSE_DATA_VALID (0x10) + +/**** Defines for the ResponseData field ****/ +#define MPI3_SCSI_RSP_RESPONSECODE_MASK (0x000000FF) +#define MPI3_SCSI_RSP_RESPONSECODE_SHIFT (0) +#define MPI3_SCSI_RSP_ARI2_MASK (0x0000FF00) +#define MPI3_SCSI_RSP_ARI2_SHIFT (8) +#define MPI3_SCSI_RSP_ARI1_MASK (0x00FF0000) +#define MPI3_SCSI_RSP_ARI1_SHIFT (16) +#define MPI3_SCSI_RSP_ARI0_MASK (0xFF000000) +#define MPI3_SCSI_RSP_ARI0_SHIFT (24) + +/**** Defines for the TaskTag field ****/ +#define MPI3_SCSI_TASKTAG_UNKNOWN (0xFFFF) + + +/***************************************************************************** + * SCSI Task Management Request Message * + ****************************************************************************/ +typedef struct _MPI3_SCSI_TASK_MGMT_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 DevHandle; /* 0x0A */ + U16 TaskHostTag; /* 0x0C */ + U8 TaskType; /* 0x0E */ + U8 Reserved0F; /* 0x0F */ + U16 TaskRequestQueueID; /* 0x10 */ + U16 Reserved12; /* 0x12 */ + U32 Reserved14; /* 0x14 */ + U8 LUN[8]; /* 0x18 */ +} MPI3_SCSI_TASK_MGMT_REQUEST, MPI3_POINTER PTR_MPI3_SCSI_TASK_MGMT_REQUEST, + Mpi3SCSITaskMgmtRequest_t, MPI3_POINTER pMpi3SCSITaskMgmtRequest_t; + +/**** Defines for the MsgFlags field ****/ +#define MPI3_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x08) + +/**** Defines for the TaskType field ****/ +#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) +#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK_SET (0x02) +#define MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) +#define MPI3_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) +#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) +#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08) +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK_SET (0x09) +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_ASYNC_EVENT (0x0A) +#define MPI3_SCSITASKMGMT_TASKTYPE_I_T_NEXUS_RESET (0x0B) + + +/***************************************************************************** + * SCSI Task Management Reply Message * + ****************************************************************************/ +typedef struct _MPI3_SCSI_TASK_MGMT_REPLY { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 IOCUseOnly08; /* 0x08 */ + U16 IOCStatus; /* 0x0A */ + U32 IOCLogInfo; /* 0x0C */ + U32 TerminationCount; /* 0x10 */ + U32 ResponseData; /* 0x14 */ + U32 Reserved18; /* 0x18 */ +} MPI3_SCSI_TASK_MGMT_REPLY, MPI3_POINTER PTR_MPI3_SCSI_TASK_MGMT_REPLY, + Mpi3SCSITaskMgmtReply_t, MPI3_POINTER pMpi3SCSITaskMgmtReply_t; + +/**** Defines for the ResponseData field - use MPI3_SCSI_RSP_ defines ****/ +/* + * Values for the ResponseCode (byte 0 of ResponseData) is normally obtained + * from the SSP Response frame. A value of 0x80 may be returned by the IOC + * for a TaskType of Query Task indicating the specified TaskHostTag I/O is + * currently queued on the IOC and has not been sent to the target device yet. + */ +#define MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC (0x80) + +#endif /* MPI30_INIT_H */ diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h new file mode 100644 index 000000000000..880d717000f6 --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h @@ -0,0 +1,1423 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2016-2020 Broadcom Inc. All rights reserved. + * + * Name: mpi30_ioc.h + * Description: Contains definitions for IOC messages such as IOC Init, IOC Facts, Port Enable, + * Events, FW Download, and FW Upload. + * Creation Date: 10/24/2016 + * Version: 03.00.00 + */ +#ifndef MPI30_IOC_H +#define MPI30_IOC_H 1 + +/***************************************************************************** + * IOC Messages * + ****************************************************************************/ + +/***************************************************************************** + * IOCInit Request Message * + ****************************************************************************/ +typedef struct _MPI3_IOC_INIT_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + MPI3_VERSION_UNION MPIVersion; /* 0x0C */ + U64 TimeStamp; /* 0x10 */ + U8 Reserved18; /* 0x18 */ + U8 WhoInit; /* 0x19 */ + U16 Reserved1A; /* 0x1A */ + U16 ReplyFreeQueueDepth; /* 0x1C */ + U16 Reserved1E; /* 0x1E */ + U64 ReplyFreeQueueAddress; /* 0x20 */ + U32 Reserved28; /* 0x28 */ + U16 SenseBufferFreeQueueDepth; /* 0x2C */ + U16 SenseBufferLength; /* 0x2E */ + U64 SenseBufferFreeQueueAddress; /* 0x30 */ + U64 DriverInformationAddress; /* 0x38 */ +} MPI3_IOC_INIT_REQUEST, MPI3_POINTER PTR_MPI3_IOC_INIT_REQUEST, + Mpi3IOCInitRequest_t, MPI3_POINTER pMpi3IOCInitRequest_t; + + +/**** Defines for the WhoInit field ****/ +#define MPI3_WHOINIT_NOT_INITIALIZED (0x00) +#define MPI3_WHOINIT_ROM_BIOS (0x02) +#define MPI3_WHOINIT_HOST_DRIVER (0x03) +#define MPI3_WHOINIT_MANUFACTURER (0x04) + +/**** Defines for the DriverInformationAddress field */ +typedef struct _MPI3_DRIVER_INFO_LAYOUT { + U32 InformationLength; /* 0x00 */ + U8 DriverSignature[12]; /* 0x04 */ + U8 OsName[16]; /* 0x10 */ + U8 OsVersion[12]; /* 0x20 */ + U8 DriverName[20]; /* 0x2C */ + U8 DriverVersion[32]; /* 0x40 */ + U8 DriverReleaseDate[20]; /* 0x60 */ + U32 DriverCapabilities; /* 0x74 */ +} MPI3_DRIVER_INFO_LAYOUT, MPI3_POINTER PTR_MPI3_DRIVER_INFO_LAYOUT, + Mpi3DriverInfoLayout_t, MPI3_POINTER pMpi3DriverInfoLayout_t; + +/***************************************************************************** + * IOCFacts Request Message * + ****************************************************************************/ +typedef struct _MPI3_IOC_FACTS_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U32 Reserved0C; /* 0x0C */ + MPI3_SGE_UNION SGL; /* 0x10 */ +} MPI3_IOC_FACTS_REQUEST, MPI3_POINTER PTR_MPI3_IOC_FACTS_REQUEST, + Mpi3IOCFactsRequest_t, MPI3_POINTER pMpi3IOCFactsRequest_t; + +/***************************************************************************** + * IOCFacts Data * + ****************************************************************************/ +typedef struct _MPI3_IOC_FACTS_DATA { + U16 IOCFactsDataLength; /* 0x00 */ + U16 Reserved02; /* 0x02 */ + MPI3_VERSION_UNION MPIVersion; /* 0x04 */ + MPI3_COMP_IMAGE_VERSION FWVersion; /* 0x08 */ + U32 IOCCapabilities; /* 0x10 */ + U8 IOCNumber; /* 0x14 */ + U8 WhoInit; /* 0x15 */ + U16 MaxMSIxVectors; /* 0x16 */ + U16 MaxOutstandingRequest; /* 0x18 */ + U16 ProductID; /* 0x1A */ + U16 IOCRequestFrameSize; /* 0x1C */ + U16 ReplyFrameSize; /* 0x1E */ + U16 IOCExceptions; /* 0x20 */ + U16 MaxPersistentID; /* 0x22 */ + U8 SGEModifierMask; /* 0x24 */ + U8 SGEModifierValue; /* 0x25 */ + U8 SGEModifierShift; /* 0x26 */ + U8 ProtocolFlags; /* 0x27 */ + U16 MaxSASInitiators; /* 0x28 */ + U16 MaxSASTargets; /* 0x2A */ + U16 MaxSASExpanders; /* 0x2C */ + U16 MaxEnclosures; /* 0x2E */ + U16 MinDevHandle; /* 0x30 */ + U16 MaxDevHandle; /* 0x32 */ + U16 MaxPCIeSwitches; /* 0x34 */ + U16 MaxNVMe; /* 0x36 */ + U16 MaxPDs; /* 0x38 */ + U16 MaxVDs; /* 0x3A */ + U16 MaxHostPDs; /* 0x3C */ + U16 MaxAdvancedHostPDs; /* 0x3E */ + U16 MaxRAIDPDs; /* 0x40 */ + U16 MaxPostedCmdBuffers; /* 0x42 */ + U32 Flags; /* 0x44 */ + U16 MaxOperationalRequestQueues; /* 0x48 */ + U16 MaxOperationalReplyQueues; /* 0x4A */ + U16 ShutdownTimeout; /* 0x4C */ + U16 Reserved4E; /* 0x4E */ + U32 DiagTraceSize; /* 0x50 */ + U32 DiagFwSize; /* 0x54 */ +} MPI3_IOC_FACTS_DATA, MPI3_POINTER PTR_MPI3_IOC_FACTS_DATA, + Mpi3IOCFactsData_t, MPI3_POINTER pMpi3IOCFactsData_t; + +/**** Defines for the IOCCapabilities field ****/ +#define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD (0x00000010) +#define MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE (0x00000008) +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_GRAN_MASK (0x00000001) +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_IOC_GRAN (0x00000000) +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_REPLY_Q_GRAN (0x00000001) + +/**** WhoInit values are defined under IOCInit Request Message definition ****/ + +/**** Defines for the ProductID field ****/ +#define MPI3_IOCFACTS_PID_TYPE_MASK (0xF000) +#define MPI3_IOCFACTS_PID_TYPE_SHIFT (12) +#define MPI3_IOCFACTS_PID_PRODUCT_MASK (0x0F00) +#define MPI3_IOCFACTS_PID_PRODUCT_SHIFT (8) +#define MPI3_IOCFACTS_PID_FAMILY_MASK (0x00FF) +#define MPI3_IOCFACTS_PID_FAMILY_SHIFT (0) + +/**** Defines for the IOCExceptions field ****/ +#define MPI3_IOCFACTS_EXCEPT_SAFE_MODE (0x0800) +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_MASK (0x0700) +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_NONE (0x0000) +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_RAID (0x0100) +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_OOB (0x0200) +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_RAID (0x0300) +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_OOB (0x0400) +#define MPI3_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0080) +#define MPI3_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0040) +#define MPI3_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0020) +#define MPI3_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0010) +#define MPI3_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0008) +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x0001) +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_PRIMARY (0x0000) +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_SECONDARY (0x0001) + +/**** Defines for the ProtocolFlags field ****/ +#define MPI3_IOCFACTS_PROTOCOL_SAS (0x0010) +#define MPI3_IOCFACTS_PROTOCOL_SATA (0x0008) +#define MPI3_IOCFACTS_PROTOCOL_NVME (0x0004) +#define MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) +#define MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) + +/**** Defines for the Flags field ****/ +#define MPI3_IOCFACTS_FLAGS_SIGNED_NVDATA_REQUIRED (0x00010000) +#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK (0x0000FF00) +#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT (8) +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK (0x00000030) +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_NOT_STARTED (0x00000000) +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_IN_PROGRESS (0x00000010) +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_COMPLETE (0x00000020) +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK (0x0000000F) +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA (0x00000000) +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR (0x00000002) + + +/***************************************************************************** + * Management Passthrough Request Message * + ****************************************************************************/ +typedef struct _MPI3_MGMT_PASSTHROUGH_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U32 Reserved0C[5]; /* 0x0C */ + MPI3_SGE_UNION CommandSGL; /* 0x20 */ + MPI3_SGE_UNION ResponseSGL; /* 0x30 */ +} MPI3_MGMT_PASSTHROUGH_REQUEST, MPI3_POINTER PTR_MPI3_MGMT_PASSTHROUGH_REQUEST, + Mpi3MgmtPassthroughRequest_t, MPI3_POINTER pMpi3MgmtPassthroughRequest_t; + +/***************************************************************************** + * CreateRequestQueue Request Message * + ****************************************************************************/ +typedef struct _MPI3_CREATE_REQUEST_QUEUE_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Flags; /* 0x0A */ + U8 Burst; /* 0x0B */ + U16 Size; /* 0x0C */ + U16 QueueID; /* 0x0E */ + U16 ReplyQueueID; /* 0x10 */ + U16 Reserved12; /* 0x12 */ + U32 Reserved14; /* 0x14 */ + U64 BaseAddress; /* 0x18 */ +} MPI3_CREATE_REQUEST_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_CREATE_REQUEST_QUEUE_REQUEST, + Mpi3CreateRequestQueueRequest_t, MPI3_POINTER pMpi3CreateRequestQueueRequest_t; + +/**** Defines for the Flags field ****/ +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_MASK (0x80) +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80) +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00) + + +/***************************************************************************** + * DeleteRequestQueue Request Message * + ****************************************************************************/ +typedef struct _MPI3_DELETE_REQUEST_QUEUE_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 QueueID; /* 0x0A */ +} MPI3_DELETE_REQUEST_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_DELETE_REQUEST_QUEUE_REQUEST, + Mpi3DeleteRequestQueueRequest_t, MPI3_POINTER pMpi3DeleteRequestQueueRequest_t; + + +/***************************************************************************** + * CreateReplyQueue Request Message * + ****************************************************************************/ +typedef struct _MPI3_CREATE_REPLY_QUEUE_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Flags; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U16 Size; /* 0x0C */ + U16 QueueID; /* 0x0E */ + U16 MSIxIndex; /* 0x10 */ + U16 Reserved12; /* 0x12 */ + U32 Reserved14; /* 0x14 */ + U64 BaseAddress; /* 0x18 */ +} MPI3_CREATE_REPLY_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_CREATE_REPLY_QUEUE_REQUEST, + Mpi3CreateReplyQueueRequest_t, MPI3_POINTER pMpi3CreateReplyQueueRequest_t; + +/**** Defines for the Flags field ****/ +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_MASK (0x80) +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80) +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00) +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_MASK (0x01) +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_DISABLE (0x00) +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE (0x01) + + +/***************************************************************************** + * DeleteReplyQueue Request Message * + ****************************************************************************/ +typedef struct _MPI3_DELETE_REPLY_QUEUE_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 QueueID; /* 0x0A */ +} MPI3_DELETE_REPLY_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_DELETE_REPLY_QUEUE_REQUEST, + Mpi3DeleteReplyQueueRequest_t, MPI3_POINTER pMpi3DeleteReplyQueueRequest_t; + + +/***************************************************************************** + * PortEnable Request Message * + ****************************************************************************/ +typedef struct _MPI3_PORT_ENABLE_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ +} MPI3_PORT_ENABLE_REQUEST, MPI3_POINTER PTR_MPI3_PORT_ENABLE_REQUEST, + Mpi3PortEnableRequest_t, MPI3_POINTER pMpi3PortEnableRequest_t; + + +/***************************************************************************** + * IOC Events and Event Management * + ****************************************************************************/ +#define MPI3_EVENT_LOG_DATA (0x01) +#define MPI3_EVENT_CHANGE (0x02) +#define MPI3_EVENT_GPIO_INTERRUPT (0x04) +#define MPI3_EVENT_TEMP_THRESHOLD (0x05) +#define MPI3_EVENT_CABLE_MGMT (0x06) +#define MPI3_EVENT_DEVICE_ADDED (0x07) +#define MPI3_EVENT_DEVICE_INFO_CHANGED (0x08) +#define MPI3_EVENT_PREPARE_FOR_RESET (0x09) +#define MPI3_EVENT_COMP_IMAGE_ACT_START (0x0A) +#define MPI3_EVENT_ENCL_DEVICE_ADDED (0x0B) +#define MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x0C) +#define MPI3_EVENT_DEVICE_STATUS_CHANGE (0x0D) +#define MPI3_EVENT_ENERGY_PACK_CHANGE (0x0E) +#define MPI3_EVENT_SAS_DISCOVERY (0x11) +#define MPI3_EVENT_SAS_BROADCAST_PRIMITIVE (0x12) +#define MPI3_EVENT_SAS_NOTIFY_PRIMITIVE (0x13) +#define MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x14) +#define MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW (0x15) +#define MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x16) +#define MPI3_EVENT_SAS_PHY_COUNTER (0x18) +#define MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x19) +#define MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x20) +#define MPI3_EVENT_PCIE_ENUMERATION (0x22) +#define MPI3_EVENT_HARD_RESET_RECEIVED (0x40) +#define MPI3_EVENT_MIN_PRODUCT_SPECIFIC (0x60) +#define MPI3_EVENT_MAX_PRODUCT_SPECIFIC (0x7F) + + +/***************************************************************************** + * Event Notification Request Message * + ****************************************************************************/ +#define MPI3_EVENT_NOTIFY_EVENTMASK_WORDS (4) + +typedef struct _MPI3_EVENT_NOTIFICATION_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U16 SASBroadcastPrimitiveMasks; /* 0x0C */ + U16 SASNotifyPrimitiveMasks; /* 0x0E */ + U32 EventMasks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS]; /* 0x10 */ +} MPI3_EVENT_NOTIFICATION_REQUEST, MPI3_POINTER PTR_MPI3_EVENT_NOTIFICATION_REQUEST, + Mpi3EventNotificationRequest_t, MPI3_POINTER pMpi3EventNotificationRequest_t; + +/**** Defines for the SASBroadcastPrimitiveMasks field - use MPI3_EVENT_PRIMITIVE_ values ****/ + +/**** Defines for the SASNotifyPrimitiveMasks field - use MPI3_EVENT_NOTIFY_ values ****/ + +/**** Defines for the EventMasks field - use MPI3_EVENT_ values ****/ + +/***************************************************************************** + * Event Notification Reply Message * + ****************************************************************************/ +typedef struct _MPI3_EVENT_NOTIFICATION_REPLY { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 IOCUseOnly08; /* 0x08 */ + U16 IOCStatus; /* 0x0A */ + U32 IOCLogInfo; /* 0x0C */ + U8 EventDataLength; /* 0x10 */ + U8 Event; /* 0x11 */ + U16 IOCChangeCount; /* 0x12 */ + U32 EventContext; /* 0x14 */ + U32 EventData[1]; /* 0x18 */ +} MPI3_EVENT_NOTIFICATION_REPLY, MPI3_POINTER PTR_MPI3_EVENT_NOTIFICATION_REPLY, + Mpi3EventNotificationReply_t, MPI3_POINTER pMpi3EventNotificationReply_t; + +/**** Defines for the MsgFlags field ****/ +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK (0x01) +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED (0x01) +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_NOT_REQUIRED (0x00) +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_MASK (0x02) +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_ORIGINAL (0x00) +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_REPLAY (0x02) + +/**** Defines for the Event field - use MPI3_EVENT_ values ****/ + + +/***************************************************************************** + * GPIO Interrupt Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_GPIO_INTERRUPT { + U8 GPIONum; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ +} MPI3_EVENT_DATA_GPIO_INTERRUPT, MPI3_POINTER PTR_MPI3_EVENT_DATA_GPIO_INTERRUPT, + Mpi3EventDataGpioInterrupt_t, MPI3_POINTER pMpi3EventDataGpioInterrupt_t; + + +/***************************************************************************** + * Temperature Threshold Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_TEMP_THRESHOLD { + U16 Status; /* 0x00 */ + U8 SensorNum; /* 0x02 */ + U8 Reserved03; /* 0x03 */ + U16 CurrentTemperature; /* 0x04 */ + U16 Reserved06; /* 0x06 */ + U32 Reserved08; /* 0x08 */ + U32 Reserved0C; /* 0x0C */ +} MPI3_EVENT_DATA_TEMP_THRESHOLD, MPI3_POINTER PTR_MPI3_EVENT_DATA_TEMP_THRESHOLD, + Mpi3EventDataTempThreshold_t, MPI3_POINTER pMpi3EventDataTempThreshold_t; + +/**** Defines for the Status field ****/ +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD3_EXCEEDED (0x0008) +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD2_EXCEEDED (0x0004) +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD1_EXCEEDED (0x0002) +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD0_EXCEEDED (0x0001) + + +/***************************************************************************** + * Cable Management Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_CABLE_MANAGEMENT { + U32 ActiveCablePowerRequirement; /* 0x00 */ + U8 Status; /* 0x04 */ + U8 ReceptacleID; /* 0x05 */ + U16 Reserved06; /* 0x06 */ +} MPI3_EVENT_DATA_CABLE_MANAGEMENT, MPI3_POINTER PTR_MPI3_EVENT_DATA_CABLE_MANAGEMENT, + Mpi3EventDataCableManagement_t, MPI3_POINTER pMpi3EventDataCableManagement_t; + +/**** Defines for the ActiveCablePowerRequirement field ****/ +#define MPI3_EVENT_CABLE_MGMT_ACT_CABLE_PWR_INVALID (0xFFFFFFFF) + +/**** Defines for the Status field ****/ +#define MPI3_EVENT_CABLE_MGMT_STATUS_INSUFFICIENT_POWER (0x00) +#define MPI3_EVENT_CABLE_MGMT_STATUS_PRESENT (0x01) +#define MPI3_EVENT_CABLE_MGMT_STATUS_DEGRADED (0x02) + + +/***************************************************************************** + * Event Ack Request Message * + ****************************************************************************/ +typedef struct _MPI3_EVENT_ACK_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U8 Event; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + U32 EventContext; /* 0x10 */ +} MPI3_EVENT_ACK_REQUEST, MPI3_POINTER PTR_MPI3_EVENT_ACK_REQUEST, + Mpi3EventAckRequest_t, MPI3_POINTER pMpi3EventAckRequest_t; + +/**** Defines for the Event field - use MPI3_EVENT_ values ****/ + + +/***************************************************************************** + * Prepare for Reset Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_PREPARE_FOR_RESET { + U8 ReasonCode; /* 0x00 */ + U8 Reserved01; /* 0x01 */ + U16 Reserved02; /* 0x02 */ +} MPI3_EVENT_DATA_PREPARE_FOR_RESET, MPI3_POINTER PTR_MPI3_EVENT_DATA_PREPARE_FOR_RESET, + Mpi3EventDataPrepareForReset_t, MPI3_POINTER pMpi3EventDataPrepareForReset_t; + +/**** Defines for the ReasonCode field ****/ +#define MPI3_EVENT_PREPARE_RESET_RC_START (0x01) +#define MPI3_EVENT_PREPARE_RESET_RC_ABORT (0x02) + + +/***************************************************************************** + * Component Image Activation Start Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION { + U32 Reserved00; /* 0x00 */ +} MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION, MPI3_POINTER PTR_MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION, + Mpi3EventDataCompImageActivation, MPI3_POINTER pMpi3EventDataCompImageActivation; + +/***************************************************************************** + * Device Added Event * + ****************************************************************************/ +/* + * The Device Added Event Data is exactly the same as Device Page 0 data + * (including the Configuration Page header). So, please use/refer to + * MPI3_DEVICE_PAGE0 structure for Device Added Event data. + */ + +/**************************************************************************** + * Device Info Changed Event * + ****************************************************************************/ +/* + * The Device Info Changed Event Data is exactly the same as Device Page 0 data + * (including the Configuration Page header). So, please use/refer to + * MPI3_DEVICE_PAGE0 structure for Device Added Event data. + */ + +/***************************************************************************** + * Device Status Change Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE { + U16 TaskTag; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 IOUnitPort; /* 0x03 */ + U16 ParentDevHandle; /* 0x04 */ + U16 DevHandle; /* 0x06 */ + U64 WWID; /* 0x08 */ + U8 LUN[8]; /* 0x10 */ +} MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE, + Mpi3EventDataDeviceStatusChange_t, MPI3_POINTER pMpi3EventDataDeviceStatusChange_t; + +/**** Defines for the ReasonCode field ****/ +#define MPI3_EVENT_DEV_STAT_RC_MOVED (0x01) +#define MPI3_EVENT_DEV_STAT_RC_HIDDEN (0x02) +#define MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN (0x03) +#define MPI3_EVENT_DEV_STAT_RC_ASYNC_NOTIFICATION (0x04) +#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT (0x20) +#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP (0x21) +#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_STRT (0x22) +#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_CMP (0x23) +#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT (0x24) +#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP (0x25) +#define MPI3_EVENT_DEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x30) +#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_STRT (0x40) +#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_CMP (0x41) +#define MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING (0x50) + +/***************************************************************************** + * Energy Pack Change Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_ENERGY_PACK_CHANGE { + U32 Reserved00; /* 0x00 */ + U16 ShutdownTimeout; /* 0x04 */ + U16 Reserved06; /* 0x06 */ +} MPI3_EVENT_DATA_ENERGY_PACK_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_ENERGY_PACK_CHANGE, + Mpi3EventDataEnergyPackChange_t, MPI3_POINTER pMpi3EventDataEnergyPackChange_t; + +/***************************************************************************** + * SAS Discovery Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_SAS_DISCOVERY { + U8 Flags; /* 0x00 */ + U8 ReasonCode; /* 0x01 */ + U8 IOUnitPort; /* 0x02 */ + U8 Reserved03; /* 0x03 */ + U32 DiscoveryStatus; /* 0x04 */ +} MPI3_EVENT_DATA_SAS_DISCOVERY, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_DISCOVERY, + Mpi3EventDataSasDiscovery_t, MPI3_POINTER pMpi3EventDataSasDiscovery_t; + +/**** Defines for the Flags field ****/ +#define MPI3_EVENT_SAS_DISC_FLAGS_DEVICE_CHANGE (0x02) +#define MPI3_EVENT_SAS_DISC_FLAGS_IN_PROGRESS (0x01) + +/**** Defines for the ReasonCode field ****/ +#define MPI3_EVENT_SAS_DISC_RC_STARTED (0x01) +#define MPI3_EVENT_SAS_DISC_RC_COMPLETED (0x02) + +/**** Defines for the DiscoveryStatus field ****/ +#define MPI3_SAS_DISC_STATUS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI3_SAS_DISC_STATUS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI3_SAS_DISC_STATUS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI3_SAS_DISC_STATUS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI3_SAS_DISC_STATUS_MULTIPLE_DEVICES_IN_SLOT (0x00004000) +#define MPI3_SAS_DISC_STATUS_SLOT_COUNT_MISMATCH (0x00002000) +#define MPI3_SAS_DISC_STATUS_TOO_MANY_SLOTS (0x00001000) +#define MPI3_SAS_DISC_STATUS_EXP_MULTI_SUBTRACTIVE (0x00000800) +#define MPI3_SAS_DISC_STATUS_MULTI_PORT_DOMAIN (0x00000400) +#define MPI3_SAS_DISC_STATUS_TABLE_TO_SUBTRACTIVE_LINK (0x00000200) +#define MPI3_SAS_DISC_STATUS_UNSUPPORTED_DEVICE (0x00000100) +#define MPI3_SAS_DISC_STATUS_TABLE_LINK (0x00000080) +#define MPI3_SAS_DISC_STATUS_SUBTRACTIVE_LINK (0x00000040) +#define MPI3_SAS_DISC_STATUS_SMP_CRC_ERROR (0x00000020) +#define MPI3_SAS_DISC_STATUS_SMP_FUNCTION_FAILED (0x00000010) +#define MPI3_SAS_DISC_STATUS_SMP_TIMEOUT (0x00000008) +#define MPI3_SAS_DISC_STATUS_MULTIPLE_PORTS (0x00000004) +#define MPI3_SAS_DISC_STATUS_INVALID_SAS_ADDRESS (0x00000002) +#define MPI3_SAS_DISC_STATUS_LOOP_DETECTED (0x00000001) + + +/***************************************************************************** + * SAS Broadcast Primitive Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { + U8 PhyNum; /* 0x00 */ + U8 IOUnitPort; /* 0x01 */ + U8 PortWidth; /* 0x02 */ + U8 Primitive; /* 0x03 */ +} MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + Mpi3EventDataSasBroadcastPrimitive_t, MPI3_POINTER pMpi3EventDataSasBroadcastPrimitive_t; + +/**** Defines for the Primitive field ****/ +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE (0x01) +#define MPI3_EVENT_BROADCAST_PRIMITIVE_SES (0x02) +#define MPI3_EVENT_BROADCAST_PRIMITIVE_EXPANDER (0x03) +#define MPI3_EVENT_BROADCAST_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) +#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED3 (0x05) +#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED4 (0x06) +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE0_RESERVED (0x07) +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE1_RESERVED (0x08) + + +/***************************************************************************** + * SAS Notify Primitive Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { + U8 PhyNum; /* 0x00 */ + U8 IOUnitPort; /* 0x01 */ + U8 Reserved02; /* 0x02 */ + U8 Primitive; /* 0x03 */ +} MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, + Mpi3EventDataSasNotifyPrimitive_t, MPI3_POINTER pMpi3EventDataSasNotifyPrimitive_t; + +/**** Defines for the Primitive field ****/ +#define MPI3_EVENT_NOTIFY_PRIMITIVE_ENABLE_SPINUP (0x01) +#define MPI3_EVENT_NOTIFY_PRIMITIVE_POWER_LOSS_EXPECTED (0x02) +#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED1 (0x03) +#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED2 (0x04) + + +/***************************************************************************** + * SAS Topology Change List Event * + ****************************************************************************/ +#ifndef MPI3_EVENT_SAS_TOPO_PHY_COUNT +#define MPI3_EVENT_SAS_TOPO_PHY_COUNT (1) +#endif /* MPI3_EVENT_SAS_TOPO_PHY_COUNT */ + +typedef struct _MPI3_EVENT_SAS_TOPO_PHY_ENTRY { + U16 AttachedDevHandle; /* 0x00 */ + U8 LinkRate; /* 0x02 */ + U8 Status; /* 0x03 */ +} MPI3_EVENT_SAS_TOPO_PHY_ENTRY, MPI3_POINTER PTR_MPI3_EVENT_SAS_TOPO_PHY_ENTRY, + Mpi3EventSasTopoPhyEntry_t, MPI3_POINTER pMpi3EventSasTopoPhyEntry_t; + +/**** Defines for the LinkRate field ****/ +#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) +#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) +#define MPI3_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) +#define MPI3_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) +#define MPI3_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) +#define MPI3_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) +#define MPI3_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) +#define MPI3_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) +#define MPI3_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) +#define MPI3_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) +#define MPI3_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) +#define MPI3_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) +#define MPI3_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) +#define MPI3_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C) + +/**** Defines for the PhyStatus field ****/ +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_MASK (0xC0) +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_SHIFT (6) +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_ACCESSIBLE (0x00) +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_NO_EXIST (0x40) +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_VACANT (0x80) +#define MPI3_EVENT_SAS_TOPO_PHY_RC_MASK (0x0F) +#define MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING (0x02) +#define MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED (0x03) +#define MPI3_EVENT_SAS_TOPO_PHY_RC_NO_CHANGE (0x04) +#define MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING (0x05) +#define MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING (0x06) + + +typedef struct _MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { + U16 EnclosureHandle; /* 0x00 */ + U16 ExpanderDevHandle; /* 0x02 */ + U8 NumPhys; /* 0x04 */ + U8 Reserved05[3]; /* 0x05 */ + U8 NumEntries; /* 0x08 */ + U8 StartPhyNum; /* 0x09 */ + U8 ExpStatus; /* 0x0A */ + U8 IOUnitPort; /* 0x0B */ + MPI3_EVENT_SAS_TOPO_PHY_ENTRY PhyEntry[MPI3_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C */ +} MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + Mpi3EventDataSasTopologyChangeList_t, MPI3_POINTER pMpi3EventDataSasTopologyChangeList_t; + +/**** Defines for the ExpStatus field ****/ +#define MPI3_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) +#define MPI3_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) +#define MPI3_EVENT_SAS_TOPO_ES_RESPONDING (0x03) +#define MPI3_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) + +/***************************************************************************** + * SAS PHY Counter Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_SAS_PHY_COUNTER { + U64 TimeStamp; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 PhyEventCode; /* 0x0C */ + U8 PhyNum; /* 0x0D */ + U16 Reserved0E; /* 0x0E */ + U32 PhyEventInfo; /* 0x10 */ + U8 CounterType; /* 0x14 */ + U8 ThresholdWindow; /* 0x15 */ + U8 TimeUnits; /* 0x16 */ + U8 Reserved17; /* 0x17 */ + U32 EventThreshold; /* 0x18 */ + U16 ThresholdFlags; /* 0x1C */ + U16 Reserved1E; /* 0x1E */ +} MPI3_EVENT_DATA_SAS_PHY_COUNTER, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_PHY_COUNTER, + Mpi3EventDataSasPhyCounter_t, MPI3_POINTER pMpi3EventDataSasPhyCounter_t; + +/**** Defines for the PhyEventCode field - use MPI3_SASPHY3_EVENT_CODE_ defines ****/ + +/**** Defines for the CounterType field - use MPI3_SASPHY3_COUNTER_TYPE_ defines ****/ + +/**** Defines for the TimeUnits field - use MPI3_SASPHY3_TIME_UNITS_ defines ****/ + +/**** Defines for the ThresholdFlags field - use MPI3_SASPHY3_TFLAGS_ defines ****/ + + +/***************************************************************************** + * SAS Device Discovery Error Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR { + U16 DevHandle; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 IOUnitPort; /* 0x03 */ + U32 Reserved04; /* 0x04 */ + U64 SASAddress; /* 0x08 */ +} MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR, + Mpi3EventDataSasDeviceDiscErr_t, MPI3_POINTER pMpi3EventDataSasDeviceDiscErr_t; + +/**** Defines for the ReasonCode field ****/ +#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_FAILED (0x01) +#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_TIMEOUT (0x02) + +/***************************************************************************** + * PCIe Enumeration Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_PCIE_ENUMERATION { + U8 Flags; /* 0x00 */ + U8 ReasonCode; /* 0x01 */ + U8 IOUnitPort; /* 0x02 */ + U8 Reserved03; /* 0x03 */ + U32 EnumerationStatus; /* 0x04 */ +} MPI3_EVENT_DATA_PCIE_ENUMERATION, MPI3_POINTER PTR_MPI3_EVENT_DATA_PCIE_ENUMERATION, + Mpi3EventDataPcieEnumeration_t, MPI3_POINTER pMpi3EventDataPcieEnumeration_t; + +/**** Defines for the Flags field ****/ +#define MPI3_EVENT_PCIE_ENUM_FLAGS_DEVICE_CHANGE (0x02) +#define MPI3_EVENT_PCIE_ENUM_FLAGS_IN_PROGRESS (0x01) + +/**** Defines for the ReasonCode field ****/ +#define MPI3_EVENT_PCIE_ENUM_RC_STARTED (0x01) +#define MPI3_EVENT_PCIE_ENUM_RC_COMPLETED (0x02) + +/**** Defines for the EnumerationStatus field ****/ +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCH_DEPTH_EXCEED (0x80000000) +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000) +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000) +#define MPI3_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000) + + +/***************************************************************************** + * PCIe Topology Change List Event * + ****************************************************************************/ +#ifndef MPI3_EVENT_PCIE_TOPO_PORT_COUNT +#define MPI3_EVENT_PCIE_TOPO_PORT_COUNT (1) +#endif /* MPI3_EVENT_PCIE_TOPO_PORT_COUNT */ + +typedef struct _MPI3_EVENT_PCIE_TOPO_PORT_ENTRY { + U16 AttachedDevHandle; /* 0x00 */ + U8 PortStatus; /* 0x02 */ + U8 Reserved03; /* 0x03 */ + U8 CurrentPortInfo; /* 0x04 */ + U8 Reserved05; /* 0x05 */ + U8 PreviousPortInfo; /* 0x06 */ + U8 Reserved07; /* 0x07 */ +} MPI3_EVENT_PCIE_TOPO_PORT_ENTRY, MPI3_POINTER PTR_MPI3_EVENT_PCIE_TOPO_PORT_ENTRY, + Mpi3EventPcieTopoPortEntry_t, MPI3_POINTER pMpi3EventPcieTopoPortEntry_t; + +/**** Defines for the PortStatus field ****/ +#define MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02) +#define MPI3_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03) +#define MPI3_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04) +#define MPI3_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05) +#define MPI3_EVENT_PCIE_TOPO_PS_RESPONDING (0x06) + +/**** Defines for the CurrentPortInfo and PreviousPortInfo field ****/ +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_MASK (0xF0) +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00) +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_1 (0x10) +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_2 (0x20) +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_4 (0x30) +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_8 (0x40) +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_16 (0x50) + +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01) +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02) +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03) +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04) +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05) +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_32_0 (0x06) + +typedef struct _MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST { + U16 EnclosureHandle; /* 0x00 */ + U16 SwitchDevHandle; /* 0x02 */ + U8 NumPorts; /* 0x04 */ + U8 Reserved05[3]; /* 0x05 */ + U8 NumEntries; /* 0x08 */ + U8 StartPortNum; /* 0x09 */ + U8 SwitchStatus; /* 0x0A */ + U8 IOUnitPort; /* 0x0B */ + U32 Reserved0C; /* 0x0C */ + MPI3_EVENT_PCIE_TOPO_PORT_ENTRY PortEntry[MPI3_EVENT_PCIE_TOPO_PORT_COUNT]; /* 0x10 */ +} MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, MPI3_POINTER PTR_MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, + Mpi3EventDataPcieTopologyChangeList_t, MPI3_POINTER pMpi3EventDataPcieTopologyChangeList_t; + +/**** Defines for the SwitchStatus field ****/ +#define MPI3_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00) +#define MPI3_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02) +#define MPI3_EVENT_PCIE_TOPO_SS_RESPONDING (0x03) +#define MPI3_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04) + +/**************************************************************************** + * Enclosure Device Added Event * + ****************************************************************************/ +/* + * The Enclosure Device Added Event Data is exactly the same as Enclosure + * Page 0 data (including the Configuration Page header). So, please + * use/refer to MPI3_ENCLOSURE_PAGE0 structure for Enclosure Device Added + * Event data. + */ + +/**************************************************************************** + * Enclosure Device Changed Event * + ****************************************************************************/ +/* + * The Enclosure Device Change Event Data is exactly the same as Enclosure + * Page 0 data (including the Configuration Page header). So, please + * use/refer to MPI3_ENCLOSURE_PAGE0 structure for Enclosure Device Change + * Event data. + */ + +/***************************************************************************** + * SAS Initiator Device Status Change Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { + U8 ReasonCode; /* 0x00 */ + U8 IOUnitPort; /* 0x01 */ + U16 DevHandle; /* 0x02 */ + U32 Reserved04; /* 0x04 */ + U64 SASAddress; /* 0x08 */ +} MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + Mpi3EventDataSasInitDevStatusChange_t, MPI3_POINTER pMpi3EventDataSasInitDevStatusChange_t; + +/**** Defines for the ReasonCode field ****/ +#define MPI3_EVENT_SAS_INIT_RC_ADDED (0x01) +#define MPI3_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) + + +/***************************************************************************** + * SAS Initiator Device Table Overflow Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { + U16 MaxInit; /* 0x00 */ + U16 CurrentInit; /* 0x02 */ + U32 Reserved04; /* 0x04 */ + U64 SASAddress; /* 0x08 */ +} MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + Mpi3EventDataSasInitTableOverflow_t, MPI3_POINTER pMpi3EventDataSasInitTableOverflow_t; + + +/***************************************************************************** + * Hard Reset Received Event * + ****************************************************************************/ +typedef struct _MPI3_EVENT_DATA_HARD_RESET_RECEIVED { + U8 Reserved00; /* 0x00 */ + U8 IOUnitPort; /* 0x01 */ + U16 Reserved02; /* 0x02 */ +} MPI3_EVENT_DATA_HARD_RESET_RECEIVED, MPI3_POINTER PTR_MPI3_EVENT_DATA_HARD_RESET_RECEIVED, + Mpi3EventDataHardResetReceived_t, MPI3_POINTER pMpi3EventDataHardResetReceived_t; + + +/***************************************************************************** + * Persistent Event Logs * + ****************************************************************************/ + +/**** Definitions for the Locale field ****/ +#define MPI3_PEL_LOCALE_FLAGS_NON_BLOCKING_BOOT_EVENT (0x0200) +#define MPI3_PEL_LOCALE_FLAGS_BLOCKING_BOOT_EVENT (0x0100) +#define MPI3_PEL_LOCALE_FLAGS_PCIE (0x0080) +#define MPI3_PEL_LOCALE_FLAGS_CONFIGURATION (0x0040) +#define MPI3_PEL_LOCALE_FLAGS_CONTROLER (0x0020) +#define MPI3_PEL_LOCALE_FLAGS_SAS (0x0010) +#define MPI3_PEL_LOCALE_FLAGS_EPACK (0x0008) +#define MPI3_PEL_LOCALE_FLAGS_ENCLOSURE (0x0004) +#define MPI3_PEL_LOCALE_FLAGS_PD (0x0002) +#define MPI3_PEL_LOCALE_FLAGS_VD (0x0001) + +/**** Definitions for the Class field ****/ +#define MPI3_PEL_CLASS_DEBUG (0x00) +#define MPI3_PEL_CLASS_PROGRESS (0x01) +#define MPI3_PEL_CLASS_INFORMATIONAL (0x02) +#define MPI3_PEL_CLASS_WARNING (0x03) +#define MPI3_PEL_CLASS_CRITICAL (0x04) +#define MPI3_PEL_CLASS_FATAL (0x05) +#define MPI3_PEL_CLASS_FAULT (0x06) + +/**** Definitions for the ClearType field ****/ +#define MPI3_PEL_CLEARTYPE_CLEAR (0x00) + +/**** Definitions for the WaitTime field ****/ +#define MPI3_PEL_WAITTIME_INFINITE_WAIT (0x00) + +/**** Definitions for the Action field ****/ +#define MPI3_PEL_ACTION_GET_SEQNUM (0x01) +#define MPI3_PEL_ACTION_MARK_CLEAR (0x02) +#define MPI3_PEL_ACTION_GET_LOG (0x03) +#define MPI3_PEL_ACTION_GET_COUNT (0x04) +#define MPI3_PEL_ACTION_WAIT (0x05) +#define MPI3_PEL_ACTION_ABORT (0x06) +#define MPI3_PEL_ACTION_GET_PRINT_STRINGS (0x07) +#define MPI3_PEL_ACTION_ACKNOWLEDGE (0x08) + +/**** Definitions for the LogStatus field ****/ +#define MPI3_PEL_STATUS_SUCCESS (0x00) +#define MPI3_PEL_STATUS_NOT_FOUND (0x01) +#define MPI3_PEL_STATUS_ABORTED (0x02) +#define MPI3_PEL_STATUS_NOT_READY (0x03) + +/**************************************************************************** + * PEL Sequence Numbers * + ****************************************************************************/ +typedef struct _MPI3_PEL_SEQ { + U32 Newest; /* 0x00 */ + U32 Oldest; /* 0x04 */ + U32 Clear; /* 0x08 */ + U32 Shutdown; /* 0x0C */ + U32 Boot; /* 0x10 */ + U32 LastAcknowledged; /* 0x14 */ +} MPI3_PEL_SEQ, MPI3_POINTER PTR_MPI3_PEL_SEQ, + Mpi3PELSeq_t, MPI3_POINTER pMpi3PELSeq_t; + +/**************************************************************************** + * PEL Entry * + ****************************************************************************/ + +typedef struct _MPI3_PEL_ENTRY { + U32 SequenceNumber; /* 0x00 */ + U32 TimeStamp[2]; /* 0x04 */ + U16 LogCode; /* 0x0C */ + U16 ArgType; /* 0x0E */ + U16 Locale; /* 0x10 */ + U8 Class; /* 0x12 */ + U8 Reserved13; /* 0x13 */ + U8 ExtNum; /* 0x14 */ + U8 NumExts; /* 0x15 */ + U8 ArgDataSize; /* 0x16 */ + U8 FixedFormatSize; /* 0x17 */ + U32 Reserved18[2]; /* 0x18 */ + U32 PELInfo[24]; /* 0x20 - 0x7F */ +} MPI3_PEL_ENTRY, MPI3_POINTER PTR_MPI3_PEL_ENTRY, + Mpi3PELEntry_t, MPI3_POINTER pMpi3PELEntry_t; + +/**************************************************************************** + * PEL Event List * + ****************************************************************************/ +typedef struct _MPI3_PEL_LIST { + U32 LogCount; /* 0x00 */ + U32 Reserved04; /* 0x04 */ + MPI3_PEL_ENTRY Entry[1]; /* 0x08 */ /* variable length */ +} MPI3_PEL_LIST, MPI3_POINTER PTR_MPI3_PEL_LIST, + Mpi3PELList_t, MPI3_POINTER pMpi3PELList_t; + +/**************************************************************************** + * PEL Count Data * + ****************************************************************************/ +typedef U32 MPI3_PEL_LOG_COUNT, MPI3_POINTER PTR_MPI3_PEL_LOG_COUNT, + Mpi3PELLogCount_t, MPI3_POINTER pMpi3PELLogCount_t; + +/**************************************************************************** + * PEL Arg Map * + ****************************************************************************/ +typedef struct _MPI3_PEL_ARG_MAP { + U8 ArgType; /* 0x00 */ + U8 Length; /* 0x01 */ + U16 StartLocation; /* 0x02 */ +} MPI3_PEL_ARG_MAP, MPI3_POINTER PTR_MPI3_PEL_ARG_MAP, + Mpi3PELArgMap_t, MPI3_POINTER pMpi3PELArgMap_t; + +/**** Definitions for the ArgType field ****/ +#define MPI3_PEL_ARG_MAP_ARG_TYPE_APPEND_STRING (0x00) +#define MPI3_PEL_ARG_MAP_ARG_TYPE_INTEGER (0x01) +#define MPI3_PEL_ARG_MAP_ARG_TYPE_STRING (0x02) +#define MPI3_PEL_ARG_MAP_ARG_TYPE_BIT_FIELD (0x03) + + +/**************************************************************************** + * PEL Print String * + ****************************************************************************/ +typedef struct _MPI3_PEL_PRINT_STRING { + U16 LogCode; /* 0x00 */ + U16 StringLength; /* 0x02 */ + U8 NumArgMap; /* 0x04 */ + U8 Reserved05[3]; /* 0x05 */ + MPI3_PEL_ARG_MAP ArgMap[1]; /* 0x08 */ /* variable length */ +} MPI3_PEL_PRINT_STRING, MPI3_POINTER PTR_MPI3_PEL_PRINT_STRING, + Mpi3PELPrintString_t, MPI3_POINTER pMpi3PELPrintString_t; + +/**************************************************************************** + * PEL Print String List * + ****************************************************************************/ +typedef struct _MPI3_PEL_PRINT_STRING_LIST { + U32 NumPrintStrings; /* 0x00 */ + U32 ResidualBytesRemain; /* 0x04 */ + U32 Reserved08[2]; /* 0x08 */ + MPI3_PEL_PRINT_STRING PrintString[1]; /* 0x10 */ /* variable length */ +} MPI3_PEL_PRINT_STRING_LIST, MPI3_POINTER PTR_MPI3_PEL_PRINT_STRING_LIST, + Mpi3PELPrintStringList_t, MPI3_POINTER pMpi3PELPrintStringList_t; + + +/**************************************************************************** + * PEL Request Msg - generic to allow header decoding * + ****************************************************************************/ +#ifndef MPI3_PEL_ACTION_SPECIFIC_MAX +#define MPI3_PEL_ACTION_SPECIFIC_MAX (1) +#endif /* MPI3_PEL_ACTION_SPECIFIC_MAX */ + +typedef struct _MPI3_PEL_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Action; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U32 ActionSpecific[MPI3_PEL_ACTION_SPECIFIC_MAX]; /* 0x0C */ /* variable length */ +} MPI3_PEL_REQUEST, MPI3_POINTER PTR_MPI3_PEL_REQUEST, + Mpi3PELRequest_t, MPI3_POINTER pMpi3PELRequest_t; + +/**************************************************************************** + * PEL ACTION Get Sequence Nembers * + ****************************************************************************/ +typedef struct _MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Action; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U32 Reserved0C[5]; /* 0x0C */ + MPI3_SGE_UNION SGL; /* 0x20 */ +} MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS, + Mpi3PELReqActionGetSequenceNumbers_t, MPI3_POINTER pMpi3PELReqActionGetSequenceNumbers_t; + +/**************************************************************************** + * PEL ACTION Clear Log * + ****************************************************************************/ +typedef struct _MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Action; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U8 ClearType; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ +} MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER, + Mpi3PELReqActionClearLogMMarker_t, MPI3_POINTER pMpi3PELReqActionClearLogMMarker_t; + +/**************************************************************************** + * PEL ACTION Get Log * + ****************************************************************************/ +typedef struct _MPI3_PEL_REQ_ACTION_GET_LOG { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Action; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U32 StartingSequenceNumber; /* 0x0C */ + U16 Locale; /* 0x10 */ + U8 Class; /* 0x12 */ + U8 Reserved13; /* 0x13 */ + U32 Reserved14[3]; /* 0x14 */ + MPI3_SGE_UNION SGL; /* 0x20 */ +} MPI3_PEL_REQ_ACTION_GET_LOG, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_LOG, + Mpi3PELReqActionGetLog_t, MPI3_POINTER pMpi3PELReqActionGetLog_t; + +/**************************************************************************** + * PEL ACTION Get Count * + ****************************************************************************/ +typedef struct _MPI3_PEL_REQ_ACTION_GET_COUNT { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Action; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U32 StartingSequenceNumber; /* 0x0C */ + U16 Locale; /* 0x10 */ + U8 Class; /* 0x12 */ + U8 Reserved13; /* 0x13 */ + U32 Reserved14[3]; /* 0x14 */ + MPI3_SGE_UNION SGL; /* 0x20 */ +} MPI3_PEL_REQ_ACTION_GET_COUNT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_COUNT, + Mpi3PELReqActionGetCount_t, MPI3_POINTER pMpi3PELReqActionGetCount_t; + +/**************************************************************************** + * PEL ACTION Wait * + ****************************************************************************/ +typedef struct _MPI3_PEL_REQ_ACTION_WAIT { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Action; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U32 StartingSequenceNumber; /* 0x0C */ + U16 Locale; /* 0x10 */ + U8 Class; /* 0x12 */ + U8 Reserved13; /* 0x13 */ + U16 WaitTime; /* 0x14 */ + U16 Reserved16; /* 0x16 */ + U32 Reserved18[2]; /* 0x18 */ +} MPI3_PEL_REQ_ACTION_WAIT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_WAIT, + Mpi3PELReqActionWait_t, MPI3_POINTER pMpi3PELReqActionWait_t; + +/**************************************************************************** + * PEL ACTION Abort * + ****************************************************************************/ +typedef struct _MPI3_PEL_REQ_ACTION_ABORT { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Action; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U32 Reserved0C; /* 0x0C */ + U16 AbortHostTag; /* 0x10 */ + U16 Reserved12; /* 0x12 */ + U32 Reserved14; /* 0x14 */ +} MPI3_PEL_REQ_ACTION_ABORT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_ABORT, + Mpi3PELReqActionAbort_t, MPI3_POINTER pMpi3PELReqActionAbort_t; + +/**************************************************************************** + * PEL ACTION Get Print Strings * + ****************************************************************************/ +typedef struct _MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Action; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U32 Reserved0C; /* 0x0C */ + U16 StartLogCode; /* 0x10 */ + U16 Reserved12; /* 0x12 */ + U32 Reserved14[3]; /* 0x14 */ + MPI3_SGE_UNION SGL; /* 0x20 */ +} MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS, + Mpi3PELReqActionGetPrintStrings_t, MPI3_POINTER pMpi3PELReqActionGetPrintStrings_t; + +/**************************************************************************** + * PEL ACTION Acknowledge * + ****************************************************************************/ +typedef struct _MPI3_PEL_REQ_ACTION_ACKNOWLEDGE { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Action; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U32 SequenceNumber; /* 0x0C */ + U32 Reserved10; /* 0x10 */ +} MPI3_PEL_REQ_ACTION_ACKNOWLEDGE, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_ACKNOWLEDGE, + Mpi3PELReqActionAcknowledge_t, MPI3_POINTER pMpi3PELReqActionAcknowledge_t; + +/**** Definitions for the MsgFlags field ****/ +#define MPI3_PELACKNOWLEDGE_MSGFLAGS_SAFE_MODE_EXIT (0x01) + +/**************************************************************************** + * PEL Reply * + ****************************************************************************/ +typedef struct _MPI3_PEL_REPLY { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 IOCUseOnly08; /* 0x08 */ + U16 IOCStatus; /* 0x0A */ + U32 IOCLogInfo; /* 0x0C */ + U8 Action; /* 0x10 */ + U8 Reserved11; /* 0x11 */ + U16 Reserved12; /* 0x12 */ + U16 PELogStatus; /* 0x14 */ + U16 Reserved16; /* 0x16 */ + U32 TransferLength; /* 0x18 */ +} MPI3_PEL_REPLY, MPI3_POINTER PTR_MPI3_PEL_REPLY, + Mpi3PELReply_t, MPI3_POINTER pMpi3PELReply_t; + + +/***************************************************************************** + * Component Image Download * + ****************************************************************************/ +typedef struct _MPI3_CI_DOWNLOAD_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Action; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U32 Signature1; /* 0x0C */ + U32 TotalImageSize; /* 0x10 */ + U32 ImageOffset; /* 0x14 */ + U32 SegmentSize; /* 0x18 */ + U32 Reserved1C; /* 0x1C */ + MPI3_SGE_UNION SGL; /* 0x20 */ +} MPI3_CI_DOWNLOAD_REQUEST, MPI3_POINTER PTR_MPI3_CI_DOWNLOAD_REQUEST, + Mpi3CIDownloadRequest_t, MPI3_POINTER pMpi3CIDownloadRequest_t; + +/**** Definitions for the MsgFlags field ****/ +#define MPI3_CI_DOWNLOAD_MSGFLAGS_LAST_SEGMENT (0x80) +#define MPI3_CI_DOWNLOAD_MSGFLAGS_FORCE_FMC_ENABLE (0x40) +#define MPI3_CI_DOWNLOAD_MSGFLAGS_SIGNED_NVDATA (0x20) +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MASK (0x03) +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_FAST (0x00) +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MEDIUM (0x01) +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_SLOW (0x02) + +/**** Definitions for the Action field ****/ +#define MPI3_CI_DOWNLOAD_ACTION_DOWNLOAD (0x01) +#define MPI3_CI_DOWNLOAD_ACTION_ONLINE_ACTIVATION (0x02) +#define MPI3_CI_DOWNLOAD_ACTION_OFFLINE_ACTIVATION (0x03) +#define MPI3_CI_DOWNLOAD_ACTION_GET_STATUS (0x04) + +typedef struct _MPI3_CI_DOWNLOAD_REPLY { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 IOCUseOnly08; /* 0x08 */ + U16 IOCStatus; /* 0x0A */ + U32 IOCLogInfo; /* 0x0C */ + U8 Flags; /* 0x10 */ + U8 CacheDirty; /* 0x11 */ + U8 PendingCount; /* 0x12 */ + U8 Reserved13; /* 0x13 */ +} MPI3_CI_DOWNLOAD_REPLY, MPI3_POINTER PTR_MPI3_CI_DOWNLOAD_REPLY, + Mpi3CIDownloadReply_t, MPI3_POINTER pMpi3CIDownloadReply_t; + +/**** Definitions for the Flags field ****/ +#define MPI3_CI_DOWNLOAD_FLAGS_DOWNLOAD_IN_PROGRESS (0x80) +#define MPI3_CI_DOWNLOAD_FLAGS_KEY_UPDATE_PENDING (0x10) +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_MASK (0x0E) +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_NOT_NEEDED (0x00) +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_AWAITING (0x02) +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_ONLINE_PENDING (0x04) +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_OFFLINE_PENDING (0x06) +#define MPI3_CI_DOWNLOAD_FLAGS_COMPATIBLE (0x01) + +/***************************************************************************** + * Component Image Upload * + ****************************************************************************/ +typedef struct _MPI3_CI_UPLOAD_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U32 Signature1; /* 0x0C */ + U32 Reserved10; /* 0x10 */ + U32 ImageOffset; /* 0x14 */ + U32 SegmentSize; /* 0x18 */ + U32 Reserved1C; /* 0x1C */ + MPI3_SGE_UNION SGL; /* 0x20 */ +} MPI3_CI_UPLOAD_REQUEST, MPI3_POINTER PTR_MPI3_CI_UPLOAD_REQUEST, + Mpi3CIUploadRequest_t, MPI3_POINTER pMpi3CIUploadRequest_t; + +/**** Defines for the MsgFlags field ****/ +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_MASK (0x01) +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_PRIMARY (0x00) +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_SECONDARY (0x01) +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_MASK (0x02) +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_FLASH (0x00) +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_EXECUTABLE (0x02) + +/**** Defines for Signature1 field - use MPI3_IMAGE_HEADER_SIGNATURE1_ defines */ + +/***************************************************************************** + * IO Unit Control * + ****************************************************************************/ + +/**** Definitions for the Operation field ****/ +#define MPI3_CTRL_OP_FORCE_FULL_DISCOVERY (0x01) +#define MPI3_CTRL_OP_LOOKUP_MAPPING (0x02) +#define MPI3_CTRL_OP_UPDATE_TIMESTAMP (0x04) +#define MPI3_CTRL_OP_GET_TIMESTAMP (0x05) +#define MPI3_CTRL_OP_REMOVE_DEVICE (0x10) +#define MPI3_CTRL_OP_CLOSE_PERSISTENT_CONNECTION (0x11) +#define MPI3_CTRL_OP_HIDDEN_ACK (0x12) +#define MPI3_CTRL_OP_SAS_SEND_PRIMITIVE (0x20) +#define MPI3_CTRL_OP_SAS_CLEAR_ERROR_LOG (0x21) +#define MPI3_CTRL_OP_PCIE_CLEAR_ERROR_LOG (0x22) + +/**** Depending on the Operation selected, the various ParamX fields *****/ +/**** contain defined data values. These indexes help identify those values *****/ +#define MPI3_CTRL_OP_LOOKUP_MAPPING_PARAM8_LOOKUP_METHOD_INDEX (0x00) +#define MPI3_CTRL_OP_UPDATE_TIMESTAMP_PARAM64_TIMESTAMP_INDEX (0x00) +#define MPI3_CTRL_OP_REMOVE_DEVICE_PARAM16_DEVHANDLE_INDEX (0x00) +#define MPI3_CTRL_OP_CLOSE_PERSIST_CONN_PARAM16_DEVHANDLE_INDEX (0x00) +#define MPI3_CTRL_OP_HIDDEN_ACK_PARAM16_DEVHANDLE_INDEX (0x00) +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PHY_INDEX (0x00) +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PRIMSEQ_INDEX (0x01) +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM32_PRIMITIVE_INDEX (0x00) +#define MPI3_CTRL_OP_SAS_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00) +#define MPI3_CTRL_OP_PCIE_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00) + +/**** Definitions for the LookupMethod field ****/ +#define MPI3_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) +#define MPI3_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) +#define MPI3_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTENT_ID (0x04) + +/**** Definitions for IoUnitControl Lookup Mapping Method Parameters ****/ +#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM16_DEVH_INDEX (0) +#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM64_WWID_INDEX (0) +#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM16_SLOTNUM_INDEX (0) +#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM64_ENCLOSURELID_INDEX (0) +#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM16_DEVH_INDEX (0) +#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM64_DEVNAME_INDEX (0) +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_DEVH_INDEX (0) +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_PERSISTENT_ID_INDEX (1) + +/*** Definitions for IoUnitControl Reply fields ****/ +#define MPI3_CTRL_LOOKUP_METHOD_VALUE16_DEVH_INDEX (0) +#define MPI3_CTRL_GET_TIMESTAMP_VALUE64_TIMESTAMP_INDEX (0) + + +/**** Definitions for the PrimSeq field ****/ +#define MPI3_CTRL_PRIMFLAGS_SINGLE (0x01) +#define MPI3_CTRL_PRIMFLAGS_TRIPLE (0x03) +#define MPI3_CTRL_PRIMFLAGS_REDUNDANT (0x06) + +typedef struct _MPI3_IOUNIT_CONTROL_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Reserved0A; /* 0x0A */ + U8 Operation; /* 0x0B */ + U32 Reserved0C; /* 0x0C */ + U64 Param64[2]; /* 0x10 */ + U32 Param32[4]; /* 0x20 */ + U16 Param16[4]; /* 0x30 */ + U8 Param8[8]; /* 0x38 */ +} MPI3_IOUNIT_CONTROL_REQUEST, MPI3_POINTER PTR_MPI3_IOUNIT_CONTROL_REQUEST, + Mpi3IoUnitControlRequest_t, MPI3_POINTER pMpi3IoUnitControlRequest_t; + + +typedef struct _MPI3_IOUNIT_CONTROL_REPLY { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 IOCUseOnly08; /* 0x08 */ + U16 IOCStatus; /* 0x0A */ + U32 IOCLogInfo; /* 0x0C */ + U64 Value64[2]; /* 0x10 */ + U32 Value32[4]; /* 0x20 */ + U16 Value16[4]; /* 0x30 */ + U8 Value8[8]; /* 0x38 */ +} MPI3_IOUNIT_CONTROL_REPLY, MPI3_POINTER PTR_MPI3_IOUNIT_CONTROL_REPLY, + Mpi3IoUnitControlReply_t, MPI3_POINTER pMpi3IoUnitControlReply_t; + +#endif /* MPI30_IOC_H */ diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_transport.h b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h new file mode 100644 index 000000000000..54f821d25209 --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h @@ -0,0 +1,675 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2016-2020 Broadcom Inc. All rights reserved. + * + * Name: mpi30_transport.h + * Description: Contains definitions for System Interface Register Set, Scatter Gather Lists etc + * Creation Date: 08/31/2016 + * Version: 03.00.00 + * + * mpi3.h Version: 03.00.00.18 + * + * + * Version History + * --------------- + * + * Date Version Description + * -------- ----------- ------------------------------------------------------ + * 11-30-18 03.00.00.08 Corresponds to Fusion-MPT MPI 3.0 Specification Rev H. + * 02-08-19 03.00.00.09 Corresponds to Fusion-MPT MPI 3.0 Specification Rev I. + * 05-03-19 03.00.00.10 Corresponds to Fusion-MPT MPI 3.0 Specification Rev J. + * 08-30-19 03.00.00.12 Corresponds to Fusion-MPT MPI 3.0 Specification Rev L. + * 11-01-19 03.00.00.13 Corresponds to Fusion-MPT MPI 3.0 Specification Rev M. + * 12-16-19 03.00.00.14 Corresponds to Fusion-MPT MPI 3.0 Specification Rev N. + * 02-28-20 03.00.00.15 Corresponds to Fusion-MPT MPI 3.0 Specification Rev O. + * 05-01-20 03.00.00.16 Corresponds to Fusion-MPT MPI 3.0 Specification Rev P. + * 06-26-20 03.00.00.17 Corresponds to Fusion-MPT MPI 3.0 Specification Rev Q. + * 08-28-20 03.00.00.18 Corresponds to Fusion-MPT MPI 3.0 Specification Rev R. + */ +#ifndef MPI30_TRANSPORT_H +#define MPI30_TRANSPORT_H 1 + +/***************************************************************************** + * Common version structure/union used in * + * messages and configuration pages * + ****************************************************************************/ + +typedef struct _MPI3_VERSION_STRUCT { + U8 Dev; /* 0x00 */ + U8 Unit; /* 0x01 */ + U8 Minor; /* 0x02 */ + U8 Major; /* 0x03 */ +} MPI3_VERSION_STRUCT, MPI3_POINTER PTR_MPI3_VERSION_STRUCT, + Mpi3VersionStruct, MPI3_POINTER pMpi3VersionStruct; + +typedef union _MPI3_VERSION_UNION { + MPI3_VERSION_STRUCT Struct; + U32 Word; +} MPI3_VERSION_UNION, MPI3_POINTER PTR_MPI3_VERSION_UNION, + Mpi3VersionUnion, MPI3_POINTER pMpi3VersionUnion; + +/****** Version constants for this revision ****/ +#define MPI3_VERSION_MAJOR (3) +#define MPI3_VERSION_MINOR (0) +#define MPI3_VERSION_UNIT (0) +#define MPI3_VERSION_DEV (18) + + +/***************************************************************************** + * System Interface Register Definitions * + ****************************************************************************/ +typedef struct _MPI3_SYSIF_OPER_QUEUE_INDEXES { + U16 ProducerIndex; /* 0x00 */ + U16 Reserved02; /* 0x02 */ + U16 ConsumerIndex; /* 0x04 */ + U16 Reserved06; /* 0x06 */ +} MPI3_SYSIF_OPER_QUEUE_INDEXES, MPI3_POINTER PTR_MPI3_SYSIF_OPER_QUEUE_INDEXES; + +typedef volatile struct _MPI3_SYSIF_REGISTERS +{ + U64 IOCInformation; /* 0x00 */ + MPI3_VERSION_UNION Version; /* 0x08 */ + U32 Reserved0C[2]; /* 0x0C */ + U32 IOCConfiguration; /* 0x14 */ + U32 Reserved18; /* 0x18 */ + U32 IOCStatus; /* 0x1C */ + U32 Reserved20; /* 0x20 */ + U32 AdminQueueNumEntries; /* 0x24 */ + U64 AdminRequestQueueAddress; /* 0x28 */ + U64 AdminReplyQueueAddress; /* 0x30 */ + U32 Reserved38[2]; /* 0x38 */ + U32 CoalesceControl; /* 0x40 */ + U32 Reserved44[1007]; /* 0x44 */ + U16 AdminRequestQueuePI; /* 0x1000 */ + U16 Reserved1002; /* 0x1002 */ + U16 AdminReplyQueueCI; /* 0x1004 */ + U16 Reserved1006; /* 0x1006 */ + MPI3_SYSIF_OPER_QUEUE_INDEXES OperQueueIndexes[383]; /* 0x1008 */ + U32 Reserved1C00; /* 0x1C00 */ + U32 WriteSequence; /* 0x1C04 */ + U32 HostDiagnostic; /* 0x1C08 */ + U32 Reserved1C0C; /* 0x1C0C */ + U32 Fault; /* 0x1C10 */ + U32 FaultInfo[3]; /* 0x1C14 */ + U32 Reserved1C20[4]; /* 0x1C20 */ + U64 HCBAddress; /* 0x1C30 */ + U32 HCBSize; /* 0x1C38 */ + U32 Reserved1C3C; /* 0x1C3C */ + U32 ReplyFreeHostIndex; /* 0x1C40 */ + U32 SenseBufferFreeHostIndex; /* 0x1C44 */ + U32 Reserved1C48[2]; /* 0x1C48 */ + U64 DiagRWData; /* 0x1C50 */ + U64 DiagRWAddress; /* 0x1C58 */ + U16 DiagRWControl; /* 0x1C60 */ + U16 DiagRWStatus; /* 0x1C62 */ + U32 Reserved1C64[35]; /* 0x1C64 */ + U32 Scratchpad[4]; /* 0x1CF0 */ + U32 Reserved1D00[192]; /* 0x1D00 */ + U32 DeviceAssignedRegisters[2048]; /* 0x2000 */ +} MPI3_SYSIF_REGS, MPI3_POINTER PTR_MPI3_SYSIF_REGS, + Mpi3SysIfRegs_t, MPI3_POINTER pMpi3SysIfRegs_t; + +/**** Defines for the IOCInformation register ****/ +#define MPI3_SYSIF_IOC_INFO_LOW_OFFSET (0x00000000) +#define MPI3_SYSIF_IOC_INFO_HIGH_OFFSET (0x00000004) +#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK (0xFF000000) +#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_SHIFT (24) + +/**** Defines for the IOCConfiguration register ****/ +#define MPI3_SYSIF_IOC_CONFIG_OFFSET (0x00000014) +#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ (0x00F00000) +#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ_SHIFT (20) +#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ (0x000F0000) +#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ_SHIFT (16) +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_MASK (0x0000C000) +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NO (0x00000000) +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL (0x00004000) +#define MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN (0x00002000) +#define MPI3_SYSIF_IOC_CONFIG_DIAG_SAVE (0x00000010) +#define MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC (0x00000001) + +/**** Defines for the IOCStatus register ****/ +#define MPI3_SYSIF_IOC_STATUS_OFFSET (0x0000001C) +#define MPI3_SYSIF_IOC_STATUS_RESET_HISTORY (0x00000010) +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK (0x0000000C) +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_NONE (0x00000000) +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS (0x00000004) +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_COMPLETE (0x00000008) +#define MPI3_SYSIF_IOC_STATUS_FAULT (0x00000002) +#define MPI3_SYSIF_IOC_STATUS_READY (0x00000001) + +/**** Defines for the AdminQueueNumEntries register ****/ +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_OFFSET (0x00000024) +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REQ_MASK (0x0FFF) +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_OFFSET (0x00000026) +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_MASK (0x0FFF0000) +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_SHIFT (16) + +/**** Defines for the AdminRequestQueueAddress register ****/ +#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_LOW_OFFSET (0x00000028) +#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_HIGH_OFFSET (0x0000002C) + +/**** Defines for the AdminReplyQueueAddress register ****/ +#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_LOW_OFFSET (0x00000030) +#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_HIGH_OFFSET (0x00000034) + +/**** Defines for the CoalesceControl register ****/ +#define MPI3_SYSIF_COALESCE_CONTROL_OFFSET (0x00000040) +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_MASK (0xC0000000) +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_NO_CHANGE (0x00000000) +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_DISABLE (0x40000000) +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_ENABLE (0xC0000000) +#define MPI3_SYSIF_COALESCE_CONTROL_VALID (0x30000000) +#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_MASK (0x00FF0000) +#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_SHIFT (16) +#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_MASK (0x0000FF00) +#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_SHIFT (8) +#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_MASK (0x000000FF) +#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_SHIFT (0) + +/**** Defines for the AdminRequestQueuePI register ****/ +#define MPI3_SYSIF_ADMIN_REQ_Q_PI_OFFSET (0x00001000) + +/**** Defines for the AdminReplyQueueCI register ****/ +#define MPI3_SYSIF_ADMIN_REPLY_Q_CI_OFFSET (0x00001004) + +/**** Defines for the OperationalRequestQueuePI register */ +#define MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET (0x00001008) +#define MPI3_SYSIF_OPER_REQ_Q_N_PI_OFFSET(N) (MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET + (((N)-1)*8)) /* N = 1, 2, 3, ..., 255 */ + +/**** Defines for the OperationalReplyQueueCI register */ +#define MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET (0x0000100C) +#define MPI3_SYSIF_OPER_REPLY_Q_N_CI_OFFSET(N) (MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET + (((N)-1)*8)) /* N = 1, 2, 3, ..., 255 */ + +/**** Defines for the WriteSequence register *****/ +#define MPI3_SYSIF_WRITE_SEQUENCE_OFFSET (0x00001C04) +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_MASK (0x0000000F) +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH (0x0) +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST (0xF) +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND (0x4) +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD (0xB) +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH (0x2) +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH (0x7) +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH (0xD) + +/**** Defines for the HostDiagnostic register *****/ +#define MPI3_SYSIF_HOST_DIAG_OFFSET (0x00001C08) +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_MASK (0x00000700) +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_NO_RESET (0x00000000) +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET (0x00000100) +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_FLASH_RCVRY_RESET (0x00000200) +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_COMPLETE_RESET (0x00000300) +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT (0x00000700) +#define MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS (0x00000080) +#define MPI3_SYSIF_HOST_DIAG_SECURE_BOOT (0x00000040) +#define MPI3_SYSIF_HOST_DIAG_CLEAR_INVALID_FW_IMAGE (0x00000020) +#define MPI3_SYSIF_HOST_DIAG_INVALID_FW_IMAGE (0x00000010) +#define MPI3_SYSIF_HOST_DIAG_HCBENABLE (0x00000008) +#define MPI3_SYSIF_HOST_DIAG_HCBMODE (0x00000004) +#define MPI3_SYSIF_HOST_DIAG_DIAG_RW_ENABLE (0x00000002) +#define MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE (0x00000001) + +/**** Defines for the Fault register ****/ +#define MPI3_SYSIF_FAULT_OFFSET (0x00001C10) +#define MPI3_SYSIF_FAULT_FUNC_AREA_MASK (0xFF000000) +#define MPI3_SYSIF_FAULT_FUNC_AREA_SHIFT (24) +#define MPI3_SYSIF_FAULT_FUNC_AREA_MPI_DEFINED (0x00000000) +#define MPI3_SYSIF_FAULT_CODE_MASK (0x0000FFFF) +#define MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET (0x0000F000) +#define MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET (0x0000F001) +#define MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS (0x0000F002) +#define MPI3_SYSIF_FAULT_CODE_COMPLETE_RESET_NEEDED (0x0000F003) +#define MPI3_SYSIF_FAULT_CODE_SAFE_MODE_EXIT (0x0000F004) +#define MPI3_SYSIF_FAULT_CODE_FACTORY_RESET (0x0000F005) + +/**** Defines for FaultCodeAdditionalInfo registers ****/ +#define MPI3_SYSIF_FAULT_INFO0_OFFSET (0x00001C14) +#define MPI3_SYSIF_FAULT_INFO1_OFFSET (0x00001C18) +#define MPI3_SYSIF_FAULT_INFO2_OFFSET (0x00001C1C) + +/**** Defines for HCBAddress register ****/ +#define MPI3_SYSIF_HCB_ADDRESS_LOW_OFFSET (0x00001C30) +#define MPI3_SYSIF_HCB_ADDRESS_HIGH_OFFSET (0x00001C34) + +/**** Defines for HCBSize register ****/ +#define MPI3_SYSIF_HCB_SIZE_OFFSET (0x00001C38) +#define MPI3_SYSIF_HCB_SIZE_SIZE_MASK (0xFFFFF000) +#define MPI3_SYSIF_HCB_SIZE_SIZE_SHIFT (12) +#define MPI3_SYSIF_HCB_SIZE_HCDW_ENABLE (0x00000001) + +/**** Defines for ReplyFreeHostIndex register ****/ +#define MPI3_SYSIF_REPLY_FREE_HOST_INDEX_OFFSET (0x00001C40) + +/**** Defines for SenseBufferFreeHostIndex register ****/ +#define MPI3_SYSIF_SENSE_BUF_FREE_HOST_INDEX_OFFSET (0x00001C44) + +/**** Defines for DiagRWData register ****/ +#define MPI3_SYSIF_DIAG_RW_DATA_LOW_OFFSET (0x00001C50) +#define MPI3_SYSIF_DIAG_RW_DATA_HIGH_OFFSET (0x00001C54) + +/**** Defines for DiagRWAddress ****/ +#define MPI3_SYSIF_DIAG_RW_ADDRESS_LOW_OFFSET (0x00001C58) +#define MPI3_SYSIF_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00001C5C) + +/**** Defines for DiagRWControl register ****/ +#define MPI3_SYSIF_DIAG_RW_CONTROL_OFFSET (0x00001C60) +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_MASK (0x00000030) +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_1BYTE (0x00000000) +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_2BYTES (0x00000010) +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_4BYTES (0x00000020) +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_8BYTES (0x00000030) +#define MPI3_SYSIF_DIAG_RW_CONTROL_RESET (0x00000004) +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_MASK (0x00000002) +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_READ (0x00000000) +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_WRITE (0x00000002) +#define MPI3_SYSIF_DIAG_RW_CONTROL_START (0x00000001) + +/**** Defines for DiagRWStatus register ****/ +#define MPI3_SYSIF_DIAG_RW_STATUS_OFFSET (0x00001C62) +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_MASK (0x0000000E) +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_SUCCESS (0x00000000) +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_INV_ADDR (0x00000002) +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_ACC_ERR (0x00000004) +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_PAR_ERR (0x00000006) +#define MPI3_SYSIF_DIAG_RW_STATUS_BUSY (0x00000001) + +/**** Defines for Scratchpad registers ****/ +#define MPI3_SYSIF_SCRATCHPAD0_OFFSET (0x00001CF0) +#define MPI3_SYSIF_SCRATCHPAD1_OFFSET (0x00001CF4) +#define MPI3_SYSIF_SCRATCHPAD2_OFFSET (0x00001CF8) +#define MPI3_SYSIF_SCRATCHPAD3_OFFSET (0x00001CFC) + +/**** Defines for Device Assigned registers ****/ +#define MPI3_SYSIF_DEVICE_ASSIGNED_REGS_OFFSET (0x00002000) + +/**** Default Defines for Diag Save Timeout ****/ +#define MPI3_SYSIF_DIAG_SAVE_TIMEOUT (60) /* seconds */ + +/***************************************************************************** + * Reply Descriptors * + ****************************************************************************/ + +/***************************************************************************** + * Default Reply Descriptor * + ****************************************************************************/ +typedef struct _MPI3_DEFAULT_REPLY_DESCRIPTOR { + U32 DescriptorTypeDependent1[2]; /* 0x00 */ + U16 RequestQueueCI; /* 0x08 */ + U16 RequestQueueID; /* 0x0A */ + U16 DescriptorTypeDependent2; /* 0x0C */ + U16 ReplyFlags; /* 0x0E */ +} MPI3_DEFAULT_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_DEFAULT_REPLY_DESCRIPTOR, + Mpi3DefaultReplyDescriptor_t, MPI3_POINTER pMpi3DefaultReplyDescriptor_t; + +/**** Defines for the ReplyFlags field ****/ +#define MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK (0x0001) +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK (0xF000) +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY (0x0000) +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS (0x1000) +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_TARGET_COMMAND_BUFFER (0x2000) +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS (0x3000) + +/***************************************************************************** + * Address Reply Descriptor * + ****************************************************************************/ +typedef struct _MPI3_ADDRESS_REPLY_DESCRIPTOR { + U64 ReplyFrameAddress; /* 0x00 */ + U16 RequestQueueCI; /* 0x08 */ + U16 RequestQueueID; /* 0x0A */ + U16 Reserved0C; /* 0x0C */ + U16 ReplyFlags; /* 0x0E */ +} MPI3_ADDRESS_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_ADDRESS_REPLY_DESCRIPTOR, + Mpi3AddressReplyDescriptor_t, MPI3_POINTER pMpi3AddressReplyDescriptor_t; + +/***************************************************************************** + * Success Reply Descriptor * + ****************************************************************************/ +typedef struct _MPI3_SUCCESS_REPLY_DESCRIPTOR { + U32 Reserved00[2]; /* 0x00 */ + U16 RequestQueueCI; /* 0x08 */ + U16 RequestQueueID; /* 0x0A */ + U16 HostTag; /* 0x0C */ + U16 ReplyFlags; /* 0x0E */ +} MPI3_SUCCESS_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_SUCCESS_REPLY_DESCRIPTOR, + Mpi3SuccessReplyDescriptor_t, MPI3_POINTER pMpi3SuccessReplyDescriptor_t; + +/***************************************************************************** + * Target Command Buffer Reply Descriptor * + ****************************************************************************/ +typedef struct _MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR { + U32 Reserved00; /* 0x00 */ + U16 InitiatorDevHandle; /* 0x04 */ + U8 PhyNum; /* 0x06 */ + U8 Reserved07; /* 0x07 */ + U16 RequestQueueCI; /* 0x08 */ + U16 RequestQueueID; /* 0x0A */ + U16 IOIndex; /* 0x0C */ + U16 ReplyFlags; /* 0x0E */ +} MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + Mpi3TargetCommandBufferReplyDescriptor_t, MPI3_POINTER pMpi3TargetCommandBufferReplyDescriptor_t; + +/**** See Default Reply Descriptor Defines above for definitions in the ReplyFlags field ****/ + +/***************************************************************************** + * Status Reply Descriptor * + ****************************************************************************/ +typedef struct _MPI3_STATUS_REPLY_DESCRIPTOR { + U16 IOCStatus; /* 0x00 */ + U16 Reserved02; /* 0x02 */ + U32 IOCLogInfo; /* 0x04 */ + U16 RequestQueueCI; /* 0x08 */ + U16 RequestQueueID; /* 0x0A */ + U16 HostTag; /* 0x0C */ + U16 ReplyFlags; /* 0x0E */ +} MPI3_STATUS_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_STATUS_REPLY_DESCRIPTOR, + Mpi3StatusReplyDescriptor_t, MPI3_POINTER pMpi3StatusReplyDescriptor_t; + +/**** Defines for the IOCStatus field ****/ +#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL (0x8000) +#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK (0x7FFF) + +/**** Defines for the IOCLogInfo field ****/ +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_MASK (0xF0000000) +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_NO_INFO (0x00000000) +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_SAS (0x30000000) +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_DATA_MASK (0x0FFFFFFF) + +/***************************************************************************** + * Union of Reply Descriptors * + ****************************************************************************/ +typedef union _MPI3_REPLY_DESCRIPTORS_UNION { + MPI3_DEFAULT_REPLY_DESCRIPTOR Default; + MPI3_ADDRESS_REPLY_DESCRIPTOR AddressReply; + MPI3_SUCCESS_REPLY_DESCRIPTOR Success; + MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; + MPI3_STATUS_REPLY_DESCRIPTOR Status; + U32 Words[4]; +} MPI3_REPLY_DESCRIPTORS_UNION, MPI3_POINTER PTR_MPI3_REPLY_DESCRIPTORS_UNION, + Mpi3ReplyDescriptorsUnion_t, MPI3_POINTER pMpi3ReplyDescriptorsUnion_t; + + +/***************************************************************************** + * Scatter Gather Elements * + ****************************************************************************/ + +/***************************************************************************** + * Common structure for Simple, Chain, and Last Chain * + * scatter gather elements * + ****************************************************************************/ +typedef struct _MPI3_SGE_COMMON { + U64 Address; /* 0x00 */ + U32 Length; /* 0x08 */ + U8 Reserved0C[3]; /* 0x0C */ + U8 Flags; /* 0x0F */ +} MPI3_SGE_SIMPLE, MPI3_POINTER PTR_MPI3_SGE_SIMPLE, + Mpi3SGESimple_t, MPI3_POINTER pMpi3SGESimple_t, + MPI3_SGE_CHAIN, MPI3_POINTER PTR_MPI3_SGE_CHAIN, + Mpi3SGEChain_t, MPI3_POINTER pMpi3SGEChain_t, + MPI3_SGE_LAST_CHAIN, MPI3_POINTER PTR_MPI3_SGE_LAST_CHAIN, + Mpi3SGELastChain_t, MPI3_POINTER pMpi3SGELastChain_t; + +/***************************************************************************** + * Bit Bucket scatter gather element * + ****************************************************************************/ +typedef struct _MPI3_SGE_BIT_BUCKET { + U64 Reserved00; /* 0x00 */ + U32 Length; /* 0x08 */ + U8 Reserved0C[3]; /* 0x0C */ + U8 Flags; /* 0x0F */ +} MPI3_SGE_BIT_BUCKET, MPI3_POINTER PTR_MPI3_SGE_BIT_BUCKET, + Mpi3SGEBitBucket, MPI3_POINTER pMpi3SGEBitBucket; + +/***************************************************************************** + * Extended EEDP scatter gather element * + ****************************************************************************/ +typedef struct _MPI3_SGE_EXTENDED_EEDP { + U8 UserDataSize; /* 0x00 */ + U8 Reserved01; /* 0x01 */ + U16 EEDPFlags; /* 0x02 */ + U32 SecondaryReferenceTag; /* 0x04 */ + U16 SecondaryApplicationTag; /* 0x08 */ + U16 ApplicationTagTranslationMask; /* 0x0A */ + U16 Reserved0C; /* 0x0C */ + U8 ExtendedOperation; /* 0x0E */ + U8 Flags; /* 0x0F */ +} MPI3_SGE_EXTENDED_EEDP, MPI3_POINTER PTR_MPI3_SGE_EXTENDED_EEDP, + Mpi3SGEExtendedEEDP_t, MPI3_POINTER pMpi3SGEExtendedEEDP_t; + +/***************************************************************************** + * Union of scatter gather elements * + ****************************************************************************/ +typedef union _MPI3_SGE_UNION { + MPI3_SGE_SIMPLE Simple; + MPI3_SGE_CHAIN Chain; + MPI3_SGE_LAST_CHAIN LastChain; + MPI3_SGE_BIT_BUCKET BitBucket; + MPI3_SGE_EXTENDED_EEDP Eedp; + U32 Words[4]; +} MPI3_SGE_UNION, MPI3_POINTER PTR_MPI3_SGE_UNION, + Mpi3SGEUnion_t, MPI3_POINTER pMpi3SGEUnion_t; + +/**** Definitions for the Flags field ****/ +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_MASK (0xF0) +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE (0x00) +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_BIT_BUCKET (0x10) +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_CHAIN (0x20) +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_LAST_CHAIN (0x30) +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_EXTENDED (0xF0) +#define MPI3_SGE_FLAGS_END_OF_LIST (0x08) +#define MPI3_SGE_FLAGS_END_OF_BUFFER (0x04) +#define MPI3_SGE_FLAGS_DLAS_MASK (0x03) +#define MPI3_SGE_FLAGS_DLAS_SYSTEM (0x00) +#define MPI3_SGE_FLAGS_DLAS_IOC_DDR (0x01) +#define MPI3_SGE_FLAGS_DLAS_IOC_CTL (0x02) + +/**** Definitions for the ExtendedOperation field of Extended element ****/ +#define MPI3_SGE_EXT_OPER_EEDP (0x00) + +/**** Definitions for the EEDPFlags field of Extended EEDP element ****/ +#define MPI3_EEDPFLAGS_INCR_PRI_REF_TAG (0x8000) +#define MPI3_EEDPFLAGS_INCR_SEC_REF_TAG (0x4000) +#define MPI3_EEDPFLAGS_INCR_PRI_APP_TAG (0x2000) +#define MPI3_EEDPFLAGS_INCR_SEC_APP_TAG (0x1000) +#define MPI3_EEDPFLAGS_ESC_PASSTHROUGH (0x0800) +#define MPI3_EEDPFLAGS_CHK_REF_TAG (0x0400) +#define MPI3_EEDPFLAGS_CHK_APP_TAG (0x0200) +#define MPI3_EEDPFLAGS_CHK_GUARD (0x0100) +#define MPI3_EEDPFLAGS_ESC_MODE_MASK (0x00C0) +#define MPI3_EEDPFLAGS_ESC_MODE_DO_NOT_DISABLE (0x0040) +#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_DISABLE (0x0080) +#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_REFTAG_DISABLE (0x00C0) +#define MPI3_EEDPFLAGS_HOST_GUARD_MASK (0x0030) +#define MPI3_EEDPFLAGS_HOST_GUARD_T10_CRC (0x0000) +#define MPI3_EEDPFLAGS_HOST_GUARD_IP_CHKSUM (0x0010) +#define MPI3_EEDPFLAGS_HOST_GUARD_OEM_SPECIFIC (0x0020) +#define MPI3_EEDPFLAGS_PT_REF_TAG (0x0008) +#define MPI3_EEDPFLAGS_EEDP_OP_MASK (0x0007) +#define MPI3_EEDPFLAGS_EEDP_OP_NOOP (0x0000) +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK (0x0001) +#define MPI3_EEDPFLAGS_EEDP_OP_STRIP (0x0002) +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REMOVE (0x0003) +#define MPI3_EEDPFLAGS_EEDP_OP_INSERT (0x0004) +#define MPI3_EEDPFLAGS_EEDP_OP_REPLACE (0x0006) +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REGEN (0x0007) + +/**** Definitions for the UserDataSize field of Extended EEDP element ****/ +#define MPI3_EEDP_UDS_512 (0x01) +#define MPI3_EEDP_UDS_520 (0x02) +#define MPI3_EEDP_UDS_4080 (0x03) +#define MPI3_EEDP_UDS_4088 (0x04) +#define MPI3_EEDP_UDS_4096 (0x05) +#define MPI3_EEDP_UDS_4104 (0x06) +#define MPI3_EEDP_UDS_4160 (0x07) + +/***************************************************************************** + * Standard Message Structures * + ****************************************************************************/ + +/***************************************************************************** + * Request Message Header for all request messages * + ****************************************************************************/ +typedef struct _MPI3_REQUEST_HEADER { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 FunctionDependent; /* 0x0A */ +} MPI3_REQUEST_HEADER, MPI3_POINTER PTR_MPI3_REQUEST_HEADER, + Mpi3RequestHeader_t, MPI3_POINTER pMpi3RequestHeader_t; + +/***************************************************************************** + * Default Reply * + ****************************************************************************/ +typedef struct _MPI3_DEFAULT_REPLY { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 IOCUseOnly08; /* 0x08 */ + U16 IOCStatus; /* 0x0A */ + U32 IOCLogInfo; /* 0x0C */ +} MPI3_DEFAULT_REPLY, MPI3_POINTER PTR_MPI3_DEFAULT_REPLY, + Mpi3DefaultReply_t, MPI3_POINTER pMpi3DefaultReply_t; + +/**** Defines for the HostTag field ****/ +#define MPI3_HOST_TAG_INVALID (0xFFFF) + +/**** Defines for message Function ****/ +/* I/O Controller functions */ +#define MPI3_FUNCTION_IOC_FACTS (0x01) /* IOC Facts */ +#define MPI3_FUNCTION_IOC_INIT (0x02) /* IOC Init */ +#define MPI3_FUNCTION_PORT_ENABLE (0x03) /* Port Enable */ +#define MPI3_FUNCTION_EVENT_NOTIFICATION (0x04) /* Event Notification */ +#define MPI3_FUNCTION_EVENT_ACK (0x05) /* Event Acknowledge */ +#define MPI3_FUNCTION_CI_DOWNLOAD (0x06) /* Component Image Download */ +#define MPI3_FUNCTION_CI_UPLOAD (0x07) /* Component Image Upload */ +#define MPI3_FUNCTION_IO_UNIT_CONTROL (0x08) /* IO Unit Control */ +#define MPI3_FUNCTION_PERSISTENT_EVENT_LOG (0x09) /* Persistent Event Log */ +#define MPI3_FUNCTION_MGMT_PASSTHROUGH (0x0A) /* Management Passthrough */ +#define MPI3_FUNCTION_CONFIG (0x10) /* Configuration */ + +/* SCSI Initiator I/O functions */ +#define MPI3_FUNCTION_SCSI_IO (0x20) /* SCSI IO */ +#define MPI3_FUNCTION_SCSI_TASK_MGMT (0x21) /* SCSI Task Management */ +#define MPI3_FUNCTION_SMP_PASSTHROUGH (0x22) /* SMP Passthrough */ +#define MPI3_FUNCTION_NVME_ENCAPSULATED (0x24) /* NVMe Encapsulated */ + +/* SCSI Target I/O functions */ +#define MPI3_FUNCTION_TARGET_ASSIST (0x30) /* Target Assist */ +#define MPI3_FUNCTION_TARGET_STATUS_SEND (0x31) /* Target Status Send */ +#define MPI3_FUNCTION_TARGET_MODE_ABORT (0x32) /* Target Mode Abort */ +#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_BASE (0x33) /* Target Command Buffer Post Base */ +#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_LIST (0x34) /* Target Command Buffer Post List */ + +/* Queue Management functions */ +#define MPI3_FUNCTION_CREATE_REQUEST_QUEUE (0x70) /* Create an operational request queue */ +#define MPI3_FUNCTION_DELETE_REQUEST_QUEUE (0x71) /* Delete an operational request queue */ +#define MPI3_FUNCTION_CREATE_REPLY_QUEUE (0x72) /* Create an operational reply queue */ +#define MPI3_FUNCTION_DELETE_REPLY_QUEUE (0x73) /* Delete an operational reply queue */ + +/* Diagnostic Tools */ +#define MPI3_FUNCTION_TOOLBOX (0x80) /* Toolbox */ +#define MPI3_FUNCTION_DIAG_BUFFER_POST (0x81) /* Post a Diagnostic Buffer to the I/O Unit */ +#define MPI3_FUNCTION_DIAG_BUFFER_MANAGE (0x82) /* Manage a Diagnostic Buffer */ +#define MPI3_FUNCTION_DIAG_BUFFER_UPLOAD (0x83) /* Upload a Diagnostic Buffer */ + +/* Miscellaneous functions */ +#define MPI3_FUNCTION_MIN_IOC_USE_ONLY (0xC0) /* Beginning of IOC Use Only range of function codes */ +#define MPI3_FUNCTION_MAX_IOC_USE_ONLY (0xEF) /* End of IOC Use Only range of function codes */ +#define MPI3_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) /* Beginning of the product-specific range of function codes */ +#define MPI3_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) /* End of the product-specific range of function codes */ + +/**** Defines for IOCStatus ****/ +#define MPI3_IOCSTATUS_LOG_INFO_AVAIL_MASK (0x8000) +#define MPI3_IOCSTATUS_LOG_INFO_AVAILABLE (0x8000) +#define MPI3_IOCSTATUS_STATUS_MASK (0x7FFF) + +/* Common IOCStatus values for all replies */ +#define MPI3_IOCSTATUS_SUCCESS (0x0000) +#define MPI3_IOCSTATUS_INVALID_FUNCTION (0x0001) +#define MPI3_IOCSTATUS_BUSY (0x0002) +#define MPI3_IOCSTATUS_INVALID_SGL (0x0003) +#define MPI3_IOCSTATUS_INTERNAL_ERROR (0x0004) +#define MPI3_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) +#define MPI3_IOCSTATUS_INVALID_FIELD (0x0007) +#define MPI3_IOCSTATUS_INVALID_STATE (0x0008) +#define MPI3_IOCSTATUS_INSUFFICIENT_POWER (0x000A) +#define MPI3_IOCSTATUS_INVALID_CHANGE_COUNT (0x000B) +#define MPI3_IOCSTATUS_FAILURE (0x001F) + +/* Config IOCStatus values */ +#define MPI3_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) +#define MPI3_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) +#define MPI3_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) +#define MPI3_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) +#define MPI3_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) +#define MPI3_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) + +/* SCSI IO IOCStatus values */ +#define MPI3_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) +#define MPI3_IOCSTATUS_SCSI_TM_NOT_SUPPORTED (0x0041) +#define MPI3_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042) +#define MPI3_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) +#define MPI3_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) +#define MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) +#define MPI3_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) +#define MPI3_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) +#define MPI3_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) +#define MPI3_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) +#define MPI3_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) +#define MPI3_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) +#define MPI3_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) + +/* SCSI Initiator and SCSI Target end-to-end data protection values */ +#define MPI3_IOCSTATUS_EEDP_GUARD_ERROR (0x004D) +#define MPI3_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E) +#define MPI3_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) + +/* SCSI Target IOCStatus values */ +#define MPI3_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) +#define MPI3_IOCSTATUS_TARGET_ABORTED (0x0063) +#define MPI3_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) +#define MPI3_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) +#define MPI3_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) +#define MPI3_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) +#define MPI3_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) +#define MPI3_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) +#define MPI3_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070) +#define MPI3_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071) + +/* Serial Attached SCSI IOCStatus values */ +#define MPI3_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) +#define MPI3_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091) + +/* Diagnostic Buffer Post/Release IOCStatus values */ +#define MPI3_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) + +/* Component Image Upload/Download */ +#define MPI3_IOCSTATUS_CI_UNSUPPORTED (0x00B0) +#define MPI3_IOCSTATUS_CI_UPDATE_SEQUENCE (0x00B1) +#define MPI3_IOCSTATUS_CI_VALIDATION_FAILED (0x00B2) +#define MPI3_IOCSTATUS_CI_UPDATE_PENDING (0x00B3) + +/* Security values */ +#define MPI3_IOCSTATUS_SECURITY_KEY_REQUIRED (0x00C0) + +/* Request and Reply Queues related IOCStatus values */ +#define MPI3_IOCSTATUS_INVALID_QUEUE_ID (0x0F00) +#define MPI3_IOCSTATUS_INVALID_QUEUE_SIZE (0x0F01) +#define MPI3_IOCSTATUS_INVALID_MSIX_VECTOR (0x0F02) +#define MPI3_IOCSTATUS_INVALID_REPLY_QUEUE_ID (0x0F03) +#define MPI3_IOCSTATUS_INVALID_QUEUE_DELETION (0x0F04) + +/**** Defines for IOCLogInfo ****/ +#define MPI3_IOCLOGINFO_TYPE_MASK (0xF0000000) +#define MPI3_IOCLOGINFO_TYPE_SHIFT (28) +#define MPI3_IOCLOGINFO_TYPE_NONE (0x0) +#define MPI3_IOCLOGINFO_TYPE_SAS (0x3) +#define MPI3_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) + +#endif /* MPI30_TRANSPORT_H */ diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_type.h b/drivers/scsi/mpi3mr/mpi/mpi30_type.h new file mode 100644 index 000000000000..fbd37288a5d0 --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi/mpi30_type.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2016-2020 Broadcom Inc. All rights reserved. + * + * Name: mpi30_type.h + * Description: MPI basic type definitions + * Creation Date: 10/07/2016 + * Version: 03.00.00 + */ +#ifndef MPI30_TYPE_H +#define MPI30_TYPE_H 1 + +/***************************************************************************** + * Define MPI3_POINTER if it has not already been defined. By default * + * MPI3_POINTER is defined to be a near pointer. MPI3_POINTER can be defined * + * as a far pointer by defining MPI3_POINTER as "far *" before this header * + * file is included. * + ****************************************************************************/ +#ifndef MPI3_POINTER +#define MPI3_POINTER * +#endif /* MPI3_POINTER */ + +/* The basic types may have already been included by mpi_type.h or mpi2_type.h*/ +#if !defined(MPI_TYPE_H) && !defined(MPI2_TYPE_H) +/***************************************************************************** +* +* Basic Types +* +*****************************************************************************/ + +typedef u8 U8; +typedef __le16 U16; +typedef __le32 U32; +typedef __le64 U64 __aligned(4); + +/***************************************************************************** +* +* Pointer Types +* +*****************************************************************************/ + +typedef U8 * PU8; +typedef U16 * PU16; +typedef U32 * PU32; +typedef U64 * PU64; +#endif /* MPI_TYPE_H && MPI2_TYPE_H */ +#endif /* MPI30_TYPE_H */

[v2,01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig

Commit Message

Comments

Patch