diff mbox

[13/20] ARM: ux500: Add the mmc capabilities flags to DT

Message ID 1395404057-27835-14-git-send-email-ulf.hansson@linaro.org
State New
Headers show

Commit Message

Ulf Hansson March 21, 2014, 12:14 p.m. UTC 
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 arch/arm/boot/dts/ste-href.dtsi |    6 ++++++
 1 file changed, 6 insertions(+)

Comments

Linus Walleij March 25, 2014, 9:39 p.m. UTC | #1 
On Fri, Mar 21, 2014 at 1:14 PM, Ulf Hansson <ulf.hansson@linaro.org> wrote:

> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index e830c37..be34beb 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -119,10 +119,13 @@ 
 			bus-width = <4>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
+			full-pwr-cycle;
 			signal-direction = <(MCI_ST_DATA2DIREN |
 						MCI_ST_CMDDIREN |
 						MCI_ST_DATA0DIREN |
 						MCI_ST_FBCLKEN)>;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
@@ -137,6 +140,7 @@ 
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
+			non-removable;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi1_default_mode>;
 			pinctrl-1 = <&sdi1_sleep_mode>;
@@ -150,6 +154,7 @@ 
 			max-frequency = <100000000>;
 			bus-width = <8>;
 			cap-mmc-highspeed;
+			non-removable;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi2_default_mode>;
 			pinctrl-1 = <&sdi2_sleep_mode>;
@@ -163,6 +168,7 @@ 
 		        max-frequency = <100000000>;
 			bus-width = <8>;
 			cap-mmc-highspeed;
+			non-removable;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi4_default_mode>;