@@ -208,6 +208,33 @@ config DMARD10
Choosing M will build the driver as a module. If so, the module
will be called dmard10.
+config FXLS8962AF
+ tristate
+
+config FXLS8962AF_I2C
+ tristate "NXP FXLS8962AF/FXLS8964AF Accelerometer I2C Driver"
+ depends on I2C
+ select FXLS8962AF
+ select REGMAP_I2C
+ help
+ Say yes here to build support for the NXP 3-axis automotive
+ accelerometer FXLS8962AF/FXLS8964AF with I2C support.
+
+ To compile this driver as a module, choose M here: the module
+ will be called fxls8962af_i2c.
+
+config FXLS8962AF_SPI
+ tristate "NXP FXLS8962AF/FXLS8964AF Accelerometer SPI Driver"
+ depends on SPI
+ select FXLS8962AF
+ select REGMAP_SPI
+ help
+ Say yes here to build support for the NXP 3-axis automotive
+ accelerometer FXLS8962AF/FXLS8964AF with SPI support.
+
+ To compile this driver as a module, choose M here: the module
+ will be called fxls8962af_spi.
+
config HID_SENSOR_ACCEL_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
@@ -25,6 +25,9 @@ obj-$(CONFIG_DA311) += da311.o
obj-$(CONFIG_DMARD06) += dmard06.o
obj-$(CONFIG_DMARD09) += dmard09.o
obj-$(CONFIG_DMARD10) += dmard10.o
+obj-$(CONFIG_FXLS8962AF) += fxls8962af-core.o
+obj-$(CONFIG_FXLS8962AF_I2C) += fxls8962af-i2c.o
+obj-$(CONFIG_FXLS8962AF_SPI) += fxls8962af-spi.o
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
obj-$(CONFIG_KXSD9) += kxsd9.o
new file mode 100644
@@ -0,0 +1,563 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NXP FXLS8962AF/FXLS8964AF Accelerometer Core Driver
+ *
+ * Copyright 2021 Connected Cars A/S
+ *
+ * Datasheet:
+ * https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
+ * https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
+ *
+ * Errata:
+ * https://www.nxp.com/docs/en/errata/ES_FXLS8962AF.pdf
+ */
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include "fxls8962af.h"
+
+#define FXLS8962AF_INT_STATUS 0x00
+#define FXLS8962AF_INT_STATUS_SRC_BOOT BIT(0)
+#define FXLS8962AF_INT_STATUS_SRC_DRDY BIT(7)
+#define FXLS8962AF_TEMP_OUT 0x01
+#define FXLS8962AF_VECM_LSB 0x02
+#define FXLS8962AF_OUT_X_LSB 0x04
+#define FXLS8962AF_OUT_Y_LSB 0x06
+#define FXLS8962AF_OUT_Z_LSB 0x08
+#define FXLS8962AF_BUF_STATUS 0x0b
+#define FXLS8962AF_BUF_X_LSB 0x0c
+#define FXLS8962AF_BUF_Y_LSB 0x0e
+#define FXLS8962AF_BUF_Z_LSB 0x10
+
+#define FXLS8962AF_PROD_REV 0x12
+#define FXLS8962AF_WHO_AM_I 0x13
+
+#define FXLS8962AF_SYS_MODE 0x14
+#define FXLS8962AF_SENS_CONFIG1 0x15
+#define FXLS8962AF_SENS_CONFIG1_ACTIVE BIT(0)
+#define FXLS8962AF_SENS_CONFIG1_RST BIT(7)
+#define FXLS8962AF_SC1_FSR_MASK GENMASK(2, 1)
+#define FXLS8962AF_SC1_FSR_PREP(x) FIELD_PREP(FXLS8962AF_SC1_FSR_MASK, (x))
+#define FXLS8962AF_SC1_FSR_GET(x) FIELD_GET(FXLS8962AF_SC1_FSR_MASK, (x))
+
+#define FXLS8962AF_SENS_CONFIG2 0x16
+#define FXLS8962AF_SENS_CONFIG3 0x17
+#define FXLS8962AF_SENS_CONFIG4 0x18
+#define FXLS8962AF_SENS_CONFIG5 0x19
+
+#define FXLS8962AF_WAKE_IDLE_LSB 0x1b
+#define FXLS8962AF_SLEEP_IDLE_LSB 0x1c
+#define FXLS8962AF_ASLP_COUNT_LSB 0x1e
+
+#define FXLS8962AF_INT_EN 0x20
+#define FXLS8962AF_INT_PIN_SEL 0x21
+
+#define FXLS8962AF_OFF_X 0x22
+#define FXLS8962AF_OFF_Y 0x23
+#define FXLS8962AF_OFF_Z 0x24
+
+#define FXLS8962AF_BUF_CONFIG1 0x26
+#define FXLS8962AF_BUF_CONFIG2 0x27
+
+#define FXLS8962AF_ORIENT_STATUS 0x28
+#define FXLS8962AF_ORIENT_CONFIG 0x29
+#define FXLS8962AF_ORIENT_DBCOUNT 0x2a
+#define FXLS8962AF_ORIENT_BF_ZCOMP 0x2b
+#define FXLS8962AF_ORIENT_THS_REG 0x2c
+
+#define FXLS8962AF_SDCD_INT_SRC1 0x2d
+#define FXLS8962AF_SDCD_INT_SRC2 0x2e
+#define FXLS8962AF_SDCD_CONFIG1 0x2f
+#define FXLS8962AF_SDCD_CONFIG2 0x30
+#define FXLS8962AF_SDCD_OT_DBCNT 0x31
+#define FXLS8962AF_SDCD_WT_DBCNT 0x32
+#define FXLS8962AF_SDCD_LTHS_LSB 0x33
+#define FXLS8962AF_SDCD_UTHS_LSB 0x35
+
+#define FXLS8962AF_SELF_TEST_CONFIG1 0x37
+#define FXLS8962AF_SELF_TEST_CONFIG2 0x38
+
+#define FXLS8962AF_MAX_REG 0x38
+
+#define FXLS8962AF_DEVICE_ID 0x62
+#define FXLS8964AF_DEVICE_ID 0x84
+
+/* Raw temp channel offset */
+#define FXLS8962AF_TEMP_CENTER_VAL 25
+
+#define FXLS8962AF_AUTO_SUSPEND_DELAY_MS 2000
+
+#define FXLS8962AF_SCALE_TABLE_LEN 4
+
+static const int fxls8962af_scale_table[FXLS8962AF_SCALE_TABLE_LEN][2] = {
+ {0, IIO_G_TO_M_S_2(980000)},
+ {0, IIO_G_TO_M_S_2(1950000)},
+ {0, IIO_G_TO_M_S_2(3910000)},
+ {0, IIO_G_TO_M_S_2(7810000)},
+};
+
+struct fxls8962af_chip_info {
+ const char *name;
+ const struct iio_chan_spec *channels;
+ int num_channels;
+ u8 chip_id;
+};
+
+struct fxls8962af_data {
+ struct regmap *regmap;
+ const struct fxls8962af_chip_info *chip_info;
+ struct regulator *vdd_reg;
+ struct iio_mount_matrix orientation;
+};
+
+const struct regmap_config fxls8962af_regmap_conf = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = FXLS8962AF_MAX_REG,
+};
+EXPORT_SYMBOL_GPL(fxls8962af_regmap_conf);
+
+enum {
+ fxls8962af_idx_x,
+ fxls8962af_idx_y,
+ fxls8962af_idx_z,
+ fxls8962af_idx_ts,
+};
+
+static int fxls8962af_power_on(struct fxls8962af_data *data)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret < 0) {
+ dev_err(dev, "failed to power on\n");
+ }
+
+ return ret;
+}
+
+static int fxls8962af_power_off(struct fxls8962af_data *data)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+
+ pm_runtime_mark_last_busy(dev);
+ ret = pm_runtime_put_autosuspend(dev);
+
+ if (ret < 0) {
+ dev_err(dev, "failed to power off\n");
+ }
+
+ return ret;
+}
+
+static int fxls8962af_standby(struct fxls8962af_data *data)
+{
+ return regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
+ FXLS8962AF_SENS_CONFIG1_ACTIVE, 0);
+}
+
+static int fxls8962af_active(struct fxls8962af_data *data)
+{
+ return regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
+ FXLS8962AF_SENS_CONFIG1_ACTIVE, 1);
+}
+
+static int fxls8962af_is_active(struct fxls8962af_data *data)
+{
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG1, ®);
+ if (ret < 0)
+ return ret;
+
+ return reg & FXLS8962AF_SENS_CONFIG1_ACTIVE;
+}
+
+static int fxls8962af_get_out(struct fxls8962af_data *data,
+ struct iio_chan_spec const *chan, int *val)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ __le16 raw_val;
+ int is_active;
+ int ret;
+
+ is_active = fxls8962af_is_active(data);
+ if (!is_active) {
+ ret = fxls8962af_power_on(data);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_bulk_read(data->regmap, chan->address,
+ &raw_val, (chan->scan_type.storagebits / 8));
+
+ if (!is_active) {
+ fxls8962af_power_off(data);
+ }
+
+ if (ret < 0) {
+ dev_err(dev, "failed to get out reg 0x%lx\n", chan->address);
+ return ret;
+ }
+
+ *val = sign_extend32(le16_to_cpu(raw_val),
+ chan->scan_type.realbits - 1);
+
+ return IIO_VAL_INT;
+}
+
+static int fxls8962af_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ *type = IIO_VAL_INT_PLUS_NANO;
+ *vals = (int *)fxls8962af_scale_table;
+ *length = ARRAY_SIZE(fxls8962af_scale_table) * 2;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int fxls8962af_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int fxls8962af_update_config(struct fxls8962af_data *data, u8 reg,
+ u8 mask, u8 val)
+{
+ int ret;
+ int is_active;
+
+ is_active = fxls8962af_is_active(data);
+ if (is_active) {
+ ret = fxls8962af_standby(data);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = regmap_update_bits(data->regmap, reg, mask, val);
+ if (ret < 0)
+ return ret;
+
+ if (is_active) {
+ ret = fxls8962af_active(data);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int fxls8962af_set_full_scale(struct fxls8962af_data *data, u32 scale)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fxls8962af_scale_table); i++)
+ if (scale == fxls8962af_scale_table[i][1])
+ break;
+
+ if (i == ARRAY_SIZE(fxls8962af_scale_table))
+ return -EINVAL;
+
+ return fxls8962af_update_config(data, FXLS8962AF_SENS_CONFIG1,
+ FXLS8962AF_SC1_FSR_MASK,
+ FXLS8962AF_SC1_FSR_PREP(i));
+}
+
+static unsigned int fxls8962af_read_full_scale(struct fxls8962af_data *data,
+ int *val)
+{
+ int ret;
+ unsigned int reg;
+ u8 range_idx;
+
+ ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG1, ®);
+ if (ret < 0)
+ return ret;
+
+ range_idx = FXLS8962AF_SC1_FSR_GET(reg);
+
+ *val = fxls8962af_scale_table[range_idx][1];
+
+ return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int fxls8962af_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct fxls8962af_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ switch (chan->type) {
+ case IIO_TEMP:
+ case IIO_ACCEL:
+ return fxls8962af_get_out(data, chan, val);
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OFFSET:
+ if (chan->type != IIO_TEMP)
+ return -EINVAL;
+
+ *val = FXLS8962AF_TEMP_CENTER_VAL;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ return fxls8962af_read_full_scale(data, val2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int fxls8962af_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct fxls8962af_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ if (val != 0)
+ return -EINVAL;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = fxls8962af_set_full_scale(data, val2);
+
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+#define FXLS8962AF_CHANNEL(axis, reg, idx) { \
+ .type = IIO_ACCEL, \
+ .address = reg, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE), \
+ .scan_index = idx, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 12, \
+ .storagebits = 16, \
+ .shift = 4, \
+ .endianness = IIO_BE, \
+ }, \
+}
+
+#define FXLS8962AF_TEMP_CHANNEL { \
+ .type = IIO_TEMP, \
+ .address = FXLS8962AF_TEMP_OUT, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_OFFSET),\
+ .scan_index = -1, \
+ .scan_type = { \
+ .realbits = 8, \
+ .storagebits = 8, \
+ }, \
+}
+
+static const struct iio_chan_spec fxls8962af_channels[] = {
+ FXLS8962AF_CHANNEL(X, FXLS8962AF_OUT_X_LSB, fxls8962af_idx_x),
+ FXLS8962AF_CHANNEL(Y, FXLS8962AF_OUT_Y_LSB, fxls8962af_idx_y),
+ FXLS8962AF_CHANNEL(Z, FXLS8962AF_OUT_Z_LSB, fxls8962af_idx_z),
+ IIO_CHAN_SOFT_TIMESTAMP(fxls8962af_idx_ts),
+ FXLS8962AF_TEMP_CHANNEL,
+};
+
+static const struct fxls8962af_chip_info fxls_chip_info_table[] = {
+ [fxls8962af] = {
+ .chip_id = FXLS8962AF_DEVICE_ID,
+ .name = "fxls8962af",
+ .channels = fxls8962af_channels,
+ .num_channels = ARRAY_SIZE(fxls8962af_channels),
+ },
+ [fxls8964af] = {
+ .chip_id = FXLS8964AF_DEVICE_ID,
+ .name = "fxls8964af",
+ .channels = fxls8962af_channels,
+ .num_channels = ARRAY_SIZE(fxls8962af_channels),
+ },
+};
+
+static const struct iio_info fxls8962af_info = {
+ .read_raw = &fxls8962af_read_raw,
+ .write_raw = &fxls8962af_write_raw,
+ .write_raw_get_fmt = fxls8962af_write_raw_get_fmt,
+ .read_avail = fxls8962af_read_avail,
+};
+
+static int fxls8962af_reset(struct fxls8962af_data *data)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
+ FXLS8962AF_SENS_CONFIG1_RST,
+ FXLS8962AF_SENS_CONFIG1_RST);
+ if (ret < 0)
+ return ret;
+
+ /* TBOOT1, TBOOT2, specifies we have to wait between 1 - 17.7ms */
+ ret = regmap_read_poll_timeout(data->regmap, FXLS8962AF_INT_STATUS, reg,
+ (reg & FXLS8962AF_INT_STATUS_SRC_BOOT), 1000, 18000);
+ if (ret)
+ dev_err(dev, "reset timeout, int_status = 0x%x\n", reg);
+
+ return ret;
+}
+
+static void fxls8962af_regulator_disable(void *data_ptr)
+{
+ struct fxls8962af_data *data = data_ptr;
+
+ regulator_disable(data->vdd_reg);
+}
+
+static void fxls8962af_pm_disable(void *dev_ptr)
+{
+ struct device *dev = dev_ptr;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_put_noidle(dev);
+
+ fxls8962af_standby(iio_priv(indio_dev));
+}
+
+int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq)
+{
+ struct fxls8962af_data *data;
+ struct iio_dev *indio_dev;
+ unsigned int reg;
+ int ret, i;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ dev_set_drvdata(dev, indio_dev);
+ data->regmap = regmap;
+
+ ret = iio_read_mount_matrix(dev, "mount-matrix", &data->orientation);
+ if (ret)
+ return ret;
+
+ data->vdd_reg = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(data->vdd_reg))
+ return dev_err_probe(dev, PTR_ERR(data->vdd_reg),
+ "Failed to get vdd regulator\n");
+
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "Failed to enable vdd regulator: %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, fxls8962af_regulator_disable, data);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(data->regmap, FXLS8962AF_WHO_AM_I, ®);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(fxls_chip_info_table); i++) {
+ if (fxls_chip_info_table[i].chip_id == reg) {
+ data->chip_info = &fxls_chip_info_table[i];
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(fxls_chip_info_table)) {
+ dev_err(dev, "failed to match device in table\n");
+ return -ENXIO;
+ }
+
+ indio_dev->channels = data->chip_info->channels;
+ indio_dev->num_channels = data->chip_info->num_channels;
+ indio_dev->name = data->chip_info->name;
+ indio_dev->info = &fxls8962af_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = fxls8962af_reset(data);
+ if (ret < 0)
+ return ret;
+
+ ret = pm_runtime_set_active(dev);
+ if (ret < 0)
+ return ret;
+
+ pm_runtime_enable(dev);
+ pm_runtime_set_autosuspend_delay(dev, FXLS8962AF_AUTO_SUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+
+ ret = devm_add_action_or_reset(dev, fxls8962af_pm_disable, dev);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_GPL(fxls8962af_core_probe);
+
+static int __maybe_unused fxls8962af_runtime_suspend(struct device *dev)
+{
+ struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev));
+ int ret;
+
+ ret = fxls8962af_standby(data);
+ if (ret < 0) {
+ dev_err(dev, "powering off device failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused fxls8962af_runtime_resume(struct device *dev)
+{
+ struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev));
+
+ return fxls8962af_active(data);
+}
+
+const struct dev_pm_ops fxls8962af_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(fxls8962af_runtime_suspend,
+ fxls8962af_runtime_resume, NULL)
+};
+EXPORT_SYMBOL_GPL(fxls8962af_pm_ops);
+
+MODULE_AUTHOR("Sean Nyekjaer <sean@geanix.com>");
+MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer driver");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NXP FXLS8962AF/FXLS8964AF Accelerometer I2C Driver
+ *
+ * Copyright 2021 Connected Cars A/S
+ */
+
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "fxls8962af.h"
+
+static int fxls8962af_probe(struct i2c_client *client)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i2c(client, &fxls8962af_regmap_conf);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "Failed to initialize i2c regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ return fxls8962af_core_probe(&client->dev, regmap, client->irq);
+}
+
+static const struct i2c_device_id fxls8962af_id[] = {
+ {"fxls8962af", fxls8962af},
+ {"fxls8964af", fxls8964af},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, fxls8962af_id);
+
+static const struct of_device_id fxls8962af_of_match[] = {
+ {.compatible = "nxp,fxls8962af"},
+ {.compatible = "nxp,fxls8964af"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, fxls8962af_of_match);
+
+static struct i2c_driver fxls8962af_driver = {
+ .driver = {
+ .name = "fxls8962af_i2c",
+ .of_match_table = fxls8962af_of_match,
+ .pm = &fxls8962af_pm_ops,
+ },
+ .probe_new = fxls8962af_probe,
+ .id_table = fxls8962af_id,
+};
+module_i2c_driver(fxls8962af_driver);
+
+MODULE_AUTHOR("Sean Nyekjaer <sean@geanix.com>");
+MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer i2c driver");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NXP FXLS8962AF/FXLS8964AF Accelerometer SPI Driver
+ *
+ * Copyright 2021 Connected Cars A/S
+ */
+
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+
+#include "fxls8962af.h"
+
+static int fxls8962af_probe(struct spi_device *spi)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_spi(spi, &fxls8962af_regmap_conf);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "Failed to initialize spi regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ return fxls8962af_core_probe(&spi->dev, regmap, spi->irq);
+}
+
+static const struct of_device_id fxls8962af_spi_of_match[] = {
+ {.compatible = "nxp,fxls8962af"},
+ {.compatible = "nxp,fxls8964af"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, fxls8962af_spi_of_match);
+
+static const struct spi_device_id fxls8962af_spi_id_table[] = {
+ {"fxls8962af", fxls8962af},
+ {"fxls8964af", fxls8964af},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, fxls8962af_spi_id_table);
+
+static struct spi_driver fxls8962af_driver = {
+ .driver = {
+ .name = "fxls8962af_spi",
+ .pm = &fxls8962af_pm_ops,
+ .of_match_table = fxls8962af_spi_of_match,
+ },
+ .probe = fxls8962af_probe,
+ .id_table = fxls8962af_spi_id_table,
+};
+module_spi_driver(fxls8962af_driver);
+
+MODULE_AUTHOR("Sean Nyekjaer <sean@geanix.com>");
+MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer spi driver");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2021 Connected Cars A/S
+ */
+#ifndef _FXLS8962AF_H_
+#define _FXLS8962AF_H_
+
+struct regmap;
+struct device;
+
+enum {
+ fxls8962af,
+ fxls8964af,
+};
+
+int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq);
+int fxls8962af_core_remove(struct device *dev);
+
+extern const struct dev_pm_ops fxls8962af_pm_ops;
+extern const struct regmap_config fxls8962af_regmap_conf;
+
+#endif /* _FXLS8962AF_H_ */