@@ -66,6 +66,13 @@ static const unsigned int sd_au_size[] = {
__res & __mask; \
})
+#define SD_POWEROFF_NOTIFY_TIMEOUT_MS 2000
+
+struct sd_busy_data {
+ struct mmc_card *card;
+ u8 *reg_buf;
+};
+
/*
* Given the decoded CSD structure, decode the raw CID to our CID structure.
*/
@@ -996,6 +1003,66 @@ static bool mmc_sd_card_using_v18(struct mmc_card *card)
(SD_MODE_UHS_SDR50 | SD_MODE_UHS_SDR104 | SD_MODE_UHS_DDR50);
}
+static int sd_write_ext_reg(struct mmc_card *card, u8 fno, u8 page, u16 offset,
+ u8 reg_data)
+{
+ struct mmc_host *host = card->host;
+ struct mmc_request mrq = {};
+ struct mmc_command cmd = {};
+ struct mmc_data data = {};
+ struct scatterlist sg;
+ u8 *reg_buf;
+
+ reg_buf = kzalloc(512, GFP_KERNEL);
+ if (!reg_buf)
+ return -ENOMEM;
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ /*
+ * Arguments of CMD49:
+ * [31:31] MIO (0 = memory).
+ * [30:27] FNO (function number).
+ * [26:26] MW - mask write mode (0 = disable).
+ * [25:18] page number.
+ * [17:9] offset address.
+ * [8:0] length (0 = 1 byte).
+ */
+ cmd.arg = fno << 27 | page << 18 | offset << 9;
+
+ /* The first byte in the buffer is the data to be written. */
+ reg_buf[0] = reg_data;
+
+ data.flags = MMC_DATA_WRITE;
+ data.blksz = 512;
+ data.blocks = 1;
+ data.sg = &sg;
+ data.sg_len = 1;
+ sg_init_one(&sg, reg_buf, 512);
+
+ cmd.opcode = SD_WRITE_EXTR_SINGLE;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ mmc_set_data_timeout(&data, card);
+ mmc_wait_for_req(host, &mrq);
+
+ kfree(reg_buf);
+
+ /*
+ * Note that, the SD card is allowed to signal busy on DAT0 up to 1s
+ * after the CMD49. Although, let's leave this to be managed by the
+ * caller.
+ */
+
+ if (cmd.error)
+ return cmd.error;
+ if (data.error)
+ return data.error;
+
+ return 0;
+}
+
static int sd_read_ext_reg(struct mmc_card *card, u8 fno, u8 page,
u16 offset, u16 len, u8 *reg_buf)
{
@@ -1446,21 +1513,84 @@ static void mmc_sd_detect(struct mmc_host *host)
}
}
+static int sd_can_poweroff_notify(struct mmc_card *card)
+{
+ return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
+}
+
+static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
+{
+ struct sd_busy_data *data = cb_data;
+ struct mmc_card *card = data->card;
+ int err;
+
+ /*
+ * Read the status register for the power management function. It's at
+ * one byte offset and is one byte long. The Power Off Notification
+ * Ready is bit 0.
+ */
+ err = sd_read_ext_reg(card, card->ext_power.fno, card->ext_power.page,
+ card->ext_power.offset + 1, 1, data->reg_buf);
+ if (err) {
+ pr_warn("%s: error %d reading status reg of PM func\n",
+ mmc_hostname(card->host), err);
+ return err;
+ }
+
+ *busy = !(data->reg_buf[0] & 0x1);
+ return 0;
+}
+
+static int sd_poweroff_notify(struct mmc_card *card)
+{
+ struct sd_busy_data cb_data;
+ u8 *reg_buf;
+ int err;
+
+ reg_buf = kzalloc(512, GFP_KERNEL);
+ if (!reg_buf)
+ return -ENOMEM;
+
+ /*
+ * Set the Power Off Notification bit in the power management settings
+ * register at 2 bytes offset.
+ */
+ err = sd_write_ext_reg(card, card->ext_power.fno, card->ext_power.page,
+ card->ext_power.offset + 2, 0x1);
+ if (err) {
+ pr_warn("%s: error %d writing Power Off Notify bit\n",
+ mmc_hostname(card->host), err);
+ goto out;
+ }
+
+ cb_data.card = card;
+ cb_data.reg_buf = reg_buf;
+ err = __mmc_poll_for_busy(card, SD_POWEROFF_NOTIFY_TIMEOUT_MS,
+ &sd_busy_poweroff_notify_cb, &cb_data);
+
+out:
+ kfree(reg_buf);
+ return err;
+}
+
static int _mmc_sd_suspend(struct mmc_host *host)
{
+ struct mmc_card *card = host->card;
int err = 0;
mmc_claim_host(host);
- if (mmc_card_suspended(host->card))
+ if (mmc_card_suspended(card))
goto out;
- if (!mmc_host_is_spi(host))
+ if (sd_can_poweroff_notify(card))
+ err = sd_poweroff_notify(card);
+ else if (!mmc_host_is_spi(host))
err = mmc_deselect_cards(host);
if (!err) {
mmc_power_off(host);
- mmc_card_set_suspended(host->card);
+ mmc_card_set_suspended(card);
}
out:
@@ -31,6 +31,7 @@
/* class 11 */
#define SD_READ_EXTR_SINGLE 48 /* adtc [31:0] R1 */
+#define SD_WRITE_EXTR_SINGLE 49 /* adtc [31:0] R1 */
/* OCR bit definitions */
#define SD_OCR_S18R (1 << 24) /* 1.8V switching request */
Rather than only deselecting the SD card via a CMD7, before we cut power to it at system suspend, at runtime suspend or at shutdown, let's add support for a graceful power off sequence via enabling the SD Power Off Notification feature. Note that, the Power Off Notification feature was added in the SD spec v4.x, which is several years ago. However, it's still a bit unclear how often the SD card vendors decides to implement support for it. To validate these changes a Sandisk Extreme PRO A2 64GB has been used, which seems to work nicely. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- drivers/mmc/core/sd.c | 136 ++++++++++++++++++++++++++++++++++++++++- include/linux/mmc/sd.h | 1 + 2 files changed, 134 insertions(+), 3 deletions(-) -- 2.25.1