diff mbox series

[v4,5/8] baseband/la12xx: add queue and modem config support

Message ID 20210424103700.8098-6-hemant.agrawal@nxp.com
State New
Headers show
Series baseband: add NXP LA12xx driver | expand

Commit Message

Hemant Agrawal April 24, 2021, 10:36 a.m. UTC
This patch add support for connecting with modem
and creating the ipc channel as queues with modem
for the exchange of data.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

---
 doc/guides/bbdevs/index.rst                |   1 +
 doc/guides/bbdevs/la12xx.rst               |  81 +++
 doc/guides/rel_notes/release_21_05.rst     |   5 +
 drivers/baseband/la12xx/bbdev_la12xx.c     | 552 ++++++++++++++++++++-
 drivers/baseband/la12xx/bbdev_la12xx.h     |  11 +-
 drivers/baseband/la12xx/bbdev_la12xx_ipc.h | 189 ++++++-
 6 files changed, 829 insertions(+), 10 deletions(-)
 create mode 100644 doc/guides/bbdevs/la12xx.rst

-- 
2.17.1

Comments

Chautru, Nicolas April 24, 2021, 10:12 p.m. UTC | #1
> -----Original Message-----

> From: Hemant Agrawal <hemant.agrawal@nxp.com>

> Sent: Saturday, April 24, 2021 3:37 AM

> Subject: [PATCH v4 5/8] baseband/la12xx: add queue and modem config

> support

> 

> This patch add support for connecting with modem and creating the ipc

> channel as queues with modem for the exchange of data.

> 

> Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>

> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

> ---

>  doc/guides/bbdevs/index.rst                |   1 +

>  doc/guides/bbdevs/la12xx.rst               |  81 +++

>  doc/guides/rel_notes/release_21_05.rst     |   5 +

>  drivers/baseband/la12xx/bbdev_la12xx.c     | 552 ++++++++++++++++++++-

>  drivers/baseband/la12xx/bbdev_la12xx.h     |  11 +-

>  drivers/baseband/la12xx/bbdev_la12xx_ipc.h | 189 ++++++-

>  6 files changed, 829 insertions(+), 10 deletions(-)  create mode 100644

> doc/guides/bbdevs/la12xx.rst

> 

> diff --git a/doc/guides/bbdevs/index.rst b/doc/guides/bbdevs/index.rst

> index 4445cbd1b0..cedd706fa6 100644

> --- a/doc/guides/bbdevs/index.rst

> +++ b/doc/guides/bbdevs/index.rst

> @@ -14,3 +14,4 @@ Baseband Device Drivers

>      fpga_lte_fec

>      fpga_5gnr_fec

>      acc100

> +    la12xx

> diff --git a/doc/guides/bbdevs/la12xx.rst b/doc/guides/bbdevs/la12xx.rst

> new file mode 100644 index 0000000000..3c9ac5c047

> --- /dev/null

> +++ b/doc/guides/bbdevs/la12xx.rst

> @@ -0,0 +1,81 @@

> +..  SPDX-License-Identifier: BSD-3-Clause

> +    Copyright 2021 NXP

> +

> +NXP LA12xx Poll Mode Driver

> +=======================================

> +

> +The BBDEV LA12xx poll mode driver (PMD) supports an implementation for

> +offloading High Phy processing functions like LDPC Encode / Decode 5GNR

> +wireless acceleration function, using PCI based LA12xx Software defined

> radio.

> +

> +More information can be found at `NXP Official Website

> +<https://www.nxp.com/products/processors-and-microcontrollers/arm-

> processors/layerscape-processors/layerscape-access-la1200-programmable-

> baseband-processor:LA1200>`_.

> +

> +Features

> +--------

> +

> +LA12xx PMD supports the following features:

> +

> +- Maximum of 8 UL queues

> +- Maximum of 8 DL queues

> +- PCIe Gen-3 x8 Interface

> +- MSI-X

> +

> +Installation

> +------------

> +

> +Section 3 of the DPDK manual provides instructions on installing and

> compiling DPDK.

> +

> +DPDK requires hugepages to be configured as detailed in section 2 of the

> DPDK manual.

> +

> +Initialization

> +--------------

> +

> +The device can be listed on the host console with:

> +

> +

> +Use the following lspci command to get the multiple LA12xx processor

> +ids. The device ID of the LA12xx baseband processor is "1c30".

> +

> +.. code-block:: console

> +

> +  sudo lspci -nn

> +

> +...

> +0001:01:00.0 Power PC [0b20]: Freescale Semiconductor Inc Device

> +[1957:1c30] ( rev 10) ...

> +0002:01:00.0 Power PC [0b20]: Freescale Semiconductor Inc Device

> +[1957:1c30] ( rev 10)

> +

> +

> +Prerequisites

> +-------------

> +

> +Currently supported by DPDK:

> +

> +- NXP LA1224 BSP **1.0+**.

> +- NXP LA1224 PCIe Modem card connected to ARM host.

> +

> +- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to

> setup the basic DPDK environment.

> +

> +* Use dev arg option ``modem=0`` to identify the modem instance for a

> +given

> +  device. This is required only if more than 1 modem cards are attached to

> host.

> +  this is optional and the default value is 0.

> +  e.g. ``--vdev=baseband_la12xx,modem=0``

> +

> +* Use dev arg option ``max_nb_queues=x`` to specify the maximum

> number

> +of queues

> +  to be used for communication with offload device i.e. modem. default is

> 16.

> +  e.g. ``--vdev=baseband_la12xx,max_nb_queues=4``

> +

> +Enabling logs

> +-------------

> +

> +For enabling logs, use the following EAL parameter:

> +

> +.. code-block:: console

> +

> +   ./your_bbdev_application <EAL args> --log-level=la12xx:<level>

> +

> +Using ``bb.la12xx`` as log matching criteria, all Baseband PMD logs can

> +be enabled which are lower than logging ``level``.

> diff --git a/doc/guides/rel_notes/release_21_05.rst

> b/doc/guides/rel_notes/release_21_05.rst

> index b3224dc332..4e0b62debb 100644

> --- a/doc/guides/rel_notes/release_21_05.rst

> +++ b/doc/guides/rel_notes/release_21_05.rst

> @@ -236,6 +236,11 @@ New Features

>    the hash function used in NICs to spread the traffic among the queues.

>    It can be used to get predictable mapping of the flows.

> 

> +* **Added NXP LA12xx baseband PMD.**

> +

> +  * Added a new baseband PMD driver for NXP LA12xx Software defined

> radio.

> +  * See the :doc:`../bbdevs/la12xx` for more details.

> +

>  * **Updated testpmd.**

> 

>    * Added a command line option to configure forced speed for Ethernet

> port.

> diff --git a/drivers/baseband/la12xx/bbdev_la12xx.c

> b/drivers/baseband/la12xx/bbdev_la12xx.c

> index f26f3f2a08..1fdeca279e 100644

> --- a/drivers/baseband/la12xx/bbdev_la12xx.c

> +++ b/drivers/baseband/la12xx/bbdev_la12xx.c

> @@ -3,6 +3,11 @@

>   */

> 

>  #include <string.h>

> +#include <unistd.h>

> +#include <fcntl.h>

> +#include <sys/ioctl.h>

> +#include <sys/mman.h>

> +#include <dirent.h>

> 

>  #include <rte_common.h>

>  #include <rte_bus_vdev.h>

> @@ -31,11 +36,549 @@ struct bbdev_la12xx_params {

>  #define LA12XX_VDEV_MODEM_ID_ARG	"modem"

>  #define LA12XX_MAX_MODEM 4

> 

> +#define LA12XX_MAX_CORES	4

> +#define LA12XX_LDPC_ENC_CORE	0

> +#define LA12XX_LDPC_DEC_CORE	1

> +

> +#define LA12XX_MAX_LDPC_ENC_QUEUES	4

> +#define LA12XX_MAX_LDPC_DEC_QUEUES	4

> +

>  static const char * const bbdev_la12xx_valid_params[] = {

>  	LA12XX_MAX_NB_QUEUES_ARG,

>  	LA12XX_VDEV_MODEM_ID_ARG,

>  };

> 

> +static const struct rte_bbdev_op_cap bbdev_capabilities[] = {

> +	{

> +		.type   = RTE_BBDEV_OP_LDPC_ENC,

> +		.cap.ldpc_enc = {

> +			.capability_flags =

> +					RTE_BBDEV_LDPC_CRC_24A_ATTACH

> |

> +

> 	RTE_BBDEV_LDPC_CRC_24B_ATTACH,

> +			.num_buffers_src =

> +

> 	RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,

> +			.num_buffers_dst =

> +

> 	RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,

> +		}

> +	},

> +	{

> +		.type   = RTE_BBDEV_OP_LDPC_DEC,

> +		.cap.ldpc_dec = {

> +			.capability_flags =

> +				RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK |

> +				RTE_BBDEV_LDPC_LLR_COMPRESSION |


Are you sure you support the 6bits LLR compression option? I don't see it being used in the PMD below. Nor in doc. 
Let me know if you are unclear what that flag really mean.  

> +

> 	RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK |

> +

> 	RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP,

> +			.num_buffers_src =

> +

> 	RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,

> +			.num_buffers_hard_out =

> +

> 	RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,

> +		}

> +	},

> +	RTE_BBDEV_END_OF_CAPABILITIES_LIST()

> +};

> +

> +static struct rte_bbdev_queue_conf default_queue_conf = {

> +	.queue_size = MAX_CHANNEL_DEPTH,

> +};

> +

> +/* Get device info */

> +static void

> +la12xx_info_get(struct rte_bbdev *dev __rte_unused,

> +		struct rte_bbdev_driver_info *dev_info) {

> +	PMD_INIT_FUNC_TRACE();

> +

> +	dev_info->driver_name = RTE_STR(DRIVER_NAME);

> +	dev_info->max_num_queues = LA12XX_MAX_QUEUES;

> +	dev_info->queue_size_lim = MAX_CHANNEL_DEPTH;

> +	dev_info->hardware_accelerated = true;

> +	dev_info->max_dl_queue_priority = 0;

> +	dev_info->max_ul_queue_priority = 0;

> +	dev_info->default_queue_conf = default_queue_conf;

> +	dev_info->capabilities = bbdev_capabilities;

> +	dev_info->cpu_flag_reqs = NULL;

> +	dev_info->min_alignment = 64;

> +

> +	rte_bbdev_log_debug("got device info from %u", dev->data-

> >dev_id); }

> +

> +/* Release queue */

> +static int

> +la12xx_queue_release(struct rte_bbdev *dev, uint16_t q_id) {

> +	RTE_SET_USED(dev);

> +	RTE_SET_USED(q_id);

> +

> +	PMD_INIT_FUNC_TRACE();

> +

> +	/* TODO: Implement */


There is still a TODO here? You mentioned it previous patch you would add now, right?

> +

> +	return 0;

> +}

> +

> +#define HUGEPG_OFFSET(A) \

> +		((uint64_t) ((unsigned long) (A) \

> +		- ((uint64_t)ipc_priv->hugepg_start.host_vaddr)))

> +

> +static int ipc_queue_configure(uint32_t channel_id,

> +		ipc_t instance, struct bbdev_la12xx_q_priv *q_priv) {

> +	ipc_userspace_t *ipc_priv = (ipc_userspace_t *)instance;

> +	ipc_instance_t *ipc_instance = ipc_priv->instance;

> +	ipc_ch_t *ch;

> +	void *vaddr;

> +	uint32_t i = 0;

> +	uint32_t msg_size = sizeof(struct bbdev_ipc_enqueue_op);

> +

> +	PMD_INIT_FUNC_TRACE();

> +

> +	rte_bbdev_log_debug("%x %p", ipc_instance->initialized,

> +		ipc_priv->instance);

> +	ch = &(ipc_instance->ch_list[channel_id]);

> +

> +	rte_bbdev_log_debug("channel: %u, depth: %u, msg size: %u",

> +		channel_id, q_priv->queue_size, msg_size);

> +

> +	/* Start init of channel */

> +	ch->md.ring_size = rte_cpu_to_be_32(q_priv->queue_size);

> +	ch->md.pi = 0;

> +	ch->md.ci = 0;

> +	ch->md.msg_size = msg_size;

> +	for (i = 0; i < q_priv->queue_size; i++) {

> +		vaddr = rte_malloc(NULL, msg_size, RTE_CACHE_LINE_SIZE);

> +		if (!vaddr)

> +			return IPC_HOST_BUF_ALLOC_FAIL;

> +		/* Only offset now */

> +		ch->bd_h[i].modem_ptr =

> +			rte_cpu_to_be_32(HUGEPG_OFFSET(vaddr));

> +		ch->bd_h[i].host_virt_l = lower_32_bits(vaddr);

> +		ch->bd_h[i].host_virt_h = upper_32_bits(vaddr);

> +		q_priv->msg_ch_vaddr[i] = vaddr;

> +		/* Not sure use of this len may be for CRC*/

> +		ch->bd_h[i].len = 0;

> +	}

> +	ch->host_ipc_params =

> +		rte_cpu_to_be_32(HUGEPG_OFFSET(q_priv-

> >host_params));

> +

> +	rte_bbdev_log_debug("Channel configured");

> +	return IPC_SUCCESS;

> +}

> +

> +static int

> +la12xx_e200_queue_setup(struct rte_bbdev *dev,

> +		struct bbdev_la12xx_q_priv *q_priv)

> +{

> +	struct bbdev_la12xx_private *priv = dev->data->dev_private;

> +	ipc_userspace_t *ipc_priv = priv->ipc_priv;

> +	struct gul_hif *mhif;

> +	ipc_metadata_t *ipc_md;

> +	ipc_ch_t *ch;

> +	int instance_id = 0, i;

> +	int ret;

> +

> +	PMD_INIT_FUNC_TRACE();

> +

> +	switch (q_priv->op_type) {

> +	case RTE_BBDEV_OP_LDPC_ENC:

> +		q_priv->la12xx_core_id = LA12XX_LDPC_ENC_CORE;

> +		break;

> +	case RTE_BBDEV_OP_LDPC_DEC:

> +		q_priv->la12xx_core_id = LA12XX_LDPC_DEC_CORE;

> +		break;

> +	default:

> +		rte_bbdev_log(ERR, "Unsupported op type\n");

> +		return -1;

> +	}

> +

> +	mhif = (struct gul_hif *)ipc_priv->mhif_start.host_vaddr;

> +	/* offset is from start of PEB */

> +	ipc_md = (ipc_metadata_t *)((uint64_t)ipc_priv-

> >peb_start.host_vaddr +

> +		mhif->ipc_regs.ipc_mdata_offset);

> +	ch = &ipc_md->instance_list[instance_id].ch_list[q_priv->q_id];

> +

> +	if (q_priv->q_id < priv->num_valid_queues) {

> +		ipc_br_md_t *md = &(ch->md);

> +

> +		q_priv->feca_blk_id = rte_cpu_to_be_32(ch->feca_blk_id);

> +		q_priv->feca_blk_id_be32 = ch->feca_blk_id;

> +		q_priv->host_pi = rte_be_to_cpu_32(md->pi);

> +		q_priv->host_ci = rte_be_to_cpu_32(md->ci);

> +		q_priv->host_params = (host_ipc_params_t *)

> +			(rte_be_to_cpu_32(ch->host_ipc_params) +

> +			((uint64_t)ipc_priv->hugepg_start.host_vaddr));

> +

> +		for (i = 0; i < q_priv->queue_size; i++) {

> +			uint32_t h, l;

> +

> +			h = ch->bd_h[i].host_virt_h;

> +			l = ch->bd_h[i].host_virt_l;

> +			q_priv->msg_ch_vaddr[i] = (void *)join_32_bits(h, l);

> +		}

> +

> +		rte_bbdev_log(WARNING,

> +			"Queue [%d] already configured, not configuring

> again",

> +			q_priv->q_id);

> +		return 0;

> +	}

> +

> +	rte_bbdev_log_debug("setting up queue %d", q_priv->q_id);

> +

> +	/* Call ipc_configure_channel */

> +	ret = ipc_queue_configure(q_priv->q_id, ipc_priv, q_priv);

> +	if (ret) {

> +		rte_bbdev_log(ERR, "Unable to setup queue (%d) (err=%d)",

> +		       q_priv->q_id, ret);

> +		return ret;

> +	}

> +

> +	/* Set queue properties for LA12xx device */

> +	switch (q_priv->op_type) {

> +	case RTE_BBDEV_OP_LDPC_ENC:

> +		if (priv->num_ldpc_enc_queues >=

> LA12XX_MAX_LDPC_ENC_QUEUES) {

> +			rte_bbdev_log(ERR,

> +				"num_ldpc_enc_queues reached max

> value");

> +			return -1;

> +		}

> +		ch->la12xx_core_id =

> +			rte_cpu_to_be_32(LA12XX_LDPC_ENC_CORE);

> +		ch->feca_blk_id = rte_cpu_to_be_32(priv-

> >num_ldpc_enc_queues++);

> +		break;

> +	case RTE_BBDEV_OP_LDPC_DEC:

> +		if (priv->num_ldpc_dec_queues >=

> LA12XX_MAX_LDPC_DEC_QUEUES) {

> +			rte_bbdev_log(ERR,

> +				"num_ldpc_dec_queues reached max

> value");

> +			return -1;

> +		}

> +		ch->la12xx_core_id =

> +			rte_cpu_to_be_32(LA12XX_LDPC_DEC_CORE);

> +		ch->feca_blk_id = rte_cpu_to_be_32(priv-

> >num_ldpc_dec_queues++);

> +		break;

> +	default:

> +		rte_bbdev_log(ERR, "Not supported op type\n");

> +		return -1;

> +	}

> +	ch->op_type = rte_cpu_to_be_32(q_priv->op_type);

> +	ch->depth = rte_cpu_to_be_32(q_priv->queue_size);

> +

> +	/* Store queue config here */

> +	q_priv->feca_blk_id = rte_cpu_to_be_32(ch->feca_blk_id);

> +	q_priv->feca_blk_id_be32 = ch->feca_blk_id;

> +

> +	return 0;

> +}

> +

> +/* Setup a queue */

> +static int

> +la12xx_queue_setup(struct rte_bbdev *dev, uint16_t q_id,

> +		const struct rte_bbdev_queue_conf *queue_conf) {

> +	struct bbdev_la12xx_private *priv = dev->data->dev_private;

> +	struct rte_bbdev_queue_data *q_data;

> +	struct bbdev_la12xx_q_priv *q_priv;

> +	int ret;

> +

> +	PMD_INIT_FUNC_TRACE();

> +

> +	/* Move to setup_queues callback */

> +	q_data = &dev->data->queues[q_id];

> +	q_data->queue_private = rte_zmalloc(NULL,

> +		sizeof(struct bbdev_la12xx_q_priv), 0);

> +	if (!q_data->queue_private) {

> +		rte_bbdev_log(ERR, "Memory allocation failed for qpriv");

> +		return -ENOMEM;

> +	}

> +	q_priv = q_data->queue_private;

> +	q_priv->q_id = q_id;

> +	q_priv->bbdev_priv = dev->data->dev_private;

> +	q_priv->queue_size = queue_conf->queue_size;

> +	q_priv->op_type = queue_conf->op_type;

> +

> +	ret = la12xx_e200_queue_setup(dev, q_priv);

> +	if (ret) {

> +		rte_bbdev_log(ERR, "e200_queue_setup failed for qid: %d",

> +				     q_id);

> +		return ret;

> +	}

> +

> +	/* Store queue config here */

> +	priv->num_valid_queues++;

> +

> +	return 0;

> +}

> +

> +static int

> +la12xx_start(struct rte_bbdev *dev)

> +{

> +	struct bbdev_la12xx_private *priv = dev->data->dev_private;

> +	ipc_userspace_t *ipc_priv = priv->ipc_priv;

> +	int ready = 0;

> +	struct gul_hif *hif_start;

> +

> +	PMD_INIT_FUNC_TRACE();

> +

> +	hif_start = (struct gul_hif *)ipc_priv->mhif_start.host_vaddr;

> +

> +	/* Set Host Read bit */

> +	SET_HIF_HOST_RDY(hif_start, HIF_HOST_READY_IPC_APP);

> +

> +	/* Now wait for modem ready bit */

> +	while (!ready)

> +		ready = CHK_HIF_MOD_RDY(hif_start,

> HIF_MOD_READY_IPC_APP);

> +

> +	return 0;

> +}

> +

> +static const struct rte_bbdev_ops pmd_ops = {

> +	.info_get = la12xx_info_get,

> +	.queue_setup = la12xx_queue_setup,

> +	.queue_release = la12xx_queue_release,

> +	.start = la12xx_start

> +};

> +static struct hugepage_info *

> +get_hugepage_info(void)

> +{

> +	struct hugepage_info *hp_info;

> +	struct rte_memseg *mseg;

> +

> +	PMD_INIT_FUNC_TRACE();

> +

> +	/* TODO - find a better way */


See previous comment

> +	hp_info = rte_malloc(NULL, sizeof(struct hugepage_info), 0);

> +	if (!hp_info) {

> +		rte_bbdev_log(ERR, "Unable to allocate on local heap");

> +		return NULL;

> +	}

> +

> +	mseg = rte_mem_virt2memseg(hp_info, NULL);

> +	hp_info->vaddr = mseg->addr;

> +	hp_info->paddr = rte_mem_virt2phy(mseg->addr);

> +	hp_info->len = mseg->len;

> +

> +	return hp_info;

> +}

> +

> +static int open_ipc_dev(int modem_id)

> +{

> +	char dev_initials[16], dev_path[PATH_MAX];

> +	struct dirent *entry;

> +	int dev_ipc = 0;

> +	DIR *dir;

> +

> +	dir = opendir("/dev/");

> +	if (!dir) {

> +		rte_bbdev_log(ERR, "Unable to open /dev/");

> +		return -1;

> +	}

> +

> +	sprintf(dev_initials, "gulipcgul%d", modem_id);

> +

> +	while ((entry = readdir(dir)) != NULL) {

> +		if (!strncmp(dev_initials, entry->d_name,

> +		    sizeof(dev_initials) - 1))

> +			break;

> +	}

> +

> +	if (!entry) {

> +		rte_bbdev_log(ERR, "Error: No gulipcgul%d device",

> modem_id);

> +		return -1;

> +	}

> +

> +	sprintf(dev_path, "/dev/%s", entry->d_name);

> +	dev_ipc = open(dev_path, O_RDWR);

> +	if (dev_ipc  < 0) {

> +		rte_bbdev_log(ERR, "Error: Cannot open %s", dev_path);

> +		return -errno;

> +	}

> +

> +	return dev_ipc;

> +}

> +

> +static int

> +setup_la12xx_dev(struct rte_bbdev *dev) {

> +	struct bbdev_la12xx_private *priv = dev->data->dev_private;

> +	ipc_userspace_t *ipc_priv = priv->ipc_priv;

> +	struct hugepage_info *hp = NULL;

> +	ipc_channel_us_t *ipc_priv_ch = NULL;

> +	int dev_ipc = 0, dev_mem = 0, i;

> +	ipc_metadata_t *ipc_md;

> +	struct gul_hif *mhif;

> +	uint32_t phy_align = 0;

> +	int ret;

> +

> +	PMD_INIT_FUNC_TRACE();

> +

> +	if (!ipc_priv) {

> +		/* TODO - get a better way */

> +		/* Get the hugepage info against it */

> +		hp = get_hugepage_info();

> +		if (!hp) {

> +			rte_bbdev_log(ERR, "Unable to get hugepage info");

> +			ret = -ENOMEM;

> +			goto err;

> +		}

> +

> +		rte_bbdev_log_debug("%lx %p %lx",

> +				hp->paddr, hp->vaddr, hp->len);

> +

> +		ipc_priv = rte_zmalloc(0, sizeof(ipc_userspace_t), 0);

> +		if (ipc_priv == NULL) {

> +			rte_bbdev_log(ERR,

> +				"Unable to allocate memory for ipc priv");

> +			ret = -ENOMEM;

> +			goto err;

> +		}

> +

> +		for (i = 0; i < IPC_MAX_CHANNEL_COUNT; i++) {

> +			ipc_priv_ch = rte_zmalloc(0,

> +				sizeof(ipc_channel_us_t), 0);

> +			if (ipc_priv_ch == NULL) {

> +				rte_bbdev_log(ERR,

> +					"Unable to allocate memory for

> channels");

> +				ret = -ENOMEM;

> +			}

> +			ipc_priv->channels[i] = ipc_priv_ch;

> +		}

> +

> +		dev_mem = open("/dev/mem", O_RDWR);

> +		if (dev_mem < 0) {

> +			rte_bbdev_log(ERR, "Error: Cannot open

> /dev/mem");

> +			ret = -errno;

> +			goto err;

> +		}

> +

> +		ipc_priv->instance_id = 0;

> +		ipc_priv->dev_mem = dev_mem;

> +

> +		rte_bbdev_log_debug("hugepg input %lx %p %lx",

> +			hp->paddr, hp->vaddr, hp->len);

> +

> +		ipc_priv->sys_map.hugepg_start.host_phys = hp->paddr;

> +		ipc_priv->sys_map.hugepg_start.size = hp->len;

> +

> +		ipc_priv->hugepg_start.host_phys = hp->paddr;

> +		ipc_priv->hugepg_start.host_vaddr = hp->vaddr;

> +		ipc_priv->hugepg_start.size = hp->len;

> +

> +		rte_free(hp);

> +	}

> +

> +	dev_ipc = open_ipc_dev(priv->modem_id);

> +	if (dev_ipc < 0) {

> +		rte_bbdev_log(ERR, "Error: open_ipc_dev failed");

> +		goto err;

> +	}

> +	ipc_priv->dev_ipc = dev_ipc;

> +

> +	ret = ioctl(ipc_priv->dev_ipc, IOCTL_GUL_IPC_GET_SYS_MAP,

> +		    &ipc_priv->sys_map);

> +	if (ret) {

> +		rte_bbdev_log(ERR,

> +			"IOCTL_GUL_IPC_GET_SYS_MAP ioctl failed");

> +		goto err;

> +	}

> +

> +	phy_align = (ipc_priv->sys_map.mhif_start.host_phys % 0x1000);

> +	ipc_priv->mhif_start.host_vaddr =

> +		mmap(0, ipc_priv->sys_map.mhif_start.size + phy_align,

> +		     (PROT_READ | PROT_WRITE), MAP_SHARED, ipc_priv-

> >dev_mem,

> +		     (ipc_priv->sys_map.mhif_start.host_phys - phy_align));

> +	if (ipc_priv->mhif_start.host_vaddr == MAP_FAILED) {

> +		rte_bbdev_log(ERR, "MAP failed:");

> +		ret = -errno;

> +		goto err;

> +	}

> +

> +	ipc_priv->mhif_start.host_vaddr = (void *) ((uint64_t)

> +		(ipc_priv->mhif_start.host_vaddr) + phy_align);

> +

> +	phy_align = (ipc_priv->sys_map.peb_start.host_phys % 0x1000);

> +	ipc_priv->peb_start.host_vaddr =

> +		mmap(0, ipc_priv->sys_map.peb_start.size + phy_align,

> +		     (PROT_READ | PROT_WRITE), MAP_SHARED, ipc_priv-

> >dev_mem,

> +		     (ipc_priv->sys_map.peb_start.host_phys - phy_align));

> +	if (ipc_priv->peb_start.host_vaddr == MAP_FAILED) {

> +		rte_bbdev_log(ERR, "MAP failed:");

> +		ret = -errno;

> +		goto err;

> +	}

> +

> +	ipc_priv->peb_start.host_vaddr = (void *)((uint64_t)

> +		(ipc_priv->peb_start.host_vaddr) + phy_align);

> +

> +	phy_align = (ipc_priv->sys_map.modem_ccsrbar.host_phys %

> 0x1000);

> +	ipc_priv->modem_ccsrbar.host_vaddr =

> +		mmap(0, ipc_priv->sys_map.modem_ccsrbar.size +

> phy_align,

> +		     (PROT_READ | PROT_WRITE), MAP_SHARED, ipc_priv-

> >dev_mem,

> +		     (ipc_priv->sys_map.modem_ccsrbar.host_phys -

> phy_align));

> +	if (ipc_priv->modem_ccsrbar.host_vaddr == MAP_FAILED) {

> +		rte_bbdev_log(ERR, "MAP failed:");

> +		ret = -errno;

> +		goto err;

> +	}

> +

> +	ipc_priv->modem_ccsrbar.host_vaddr = (void *)((uint64_t)

> +		(ipc_priv->modem_ccsrbar.host_vaddr) + phy_align);

> +

> +	ipc_priv->hugepg_start.modem_phys =

> +		ipc_priv->sys_map.hugepg_start.modem_phys;

> +

> +	ipc_priv->mhif_start.host_phys =

> +		ipc_priv->sys_map.mhif_start.host_phys;

> +	ipc_priv->mhif_start.size = ipc_priv->sys_map.mhif_start.size;

> +	ipc_priv->peb_start.host_phys = ipc_priv-

> >sys_map.peb_start.host_phys;

> +	ipc_priv->peb_start.size = ipc_priv->sys_map.peb_start.size;

> +

> +	rte_bbdev_log(INFO, "peb %lx %p %x",

> +			ipc_priv->peb_start.host_phys,

> +			ipc_priv->peb_start.host_vaddr,

> +			ipc_priv->peb_start.size);

> +	rte_bbdev_log(INFO, "hugepg %lx %p %x",

> +			ipc_priv->hugepg_start.host_phys,

> +			ipc_priv->hugepg_start.host_vaddr,

> +			ipc_priv->hugepg_start.size);

> +	rte_bbdev_log(INFO, "mhif %lx %p %x",

> +			ipc_priv->mhif_start.host_phys,

> +			ipc_priv->mhif_start.host_vaddr,

> +			ipc_priv->mhif_start.size);

> +	mhif = (struct gul_hif *)ipc_priv->mhif_start.host_vaddr;

> +

> +	/* offset is from start of PEB */

> +	ipc_md = (ipc_metadata_t *)((uint64_t)ipc_priv-

> >peb_start.host_vaddr +

> +			mhif->ipc_regs.ipc_mdata_offset);

> +

> +	if (sizeof(ipc_metadata_t) != mhif->ipc_regs.ipc_mdata_size) {

> +		rte_bbdev_log(ERR,

> +			"ipc_metadata_t =%lx, mhif-

> >ipc_regs.ipc_mdata_size=%x",

> +			sizeof(ipc_metadata_t), mhif-

> >ipc_regs.ipc_mdata_size);

> +		rte_bbdev_log(ERR, "--> mhif->ipc_regs.ipc_mdata_offset=

> %x",

> +			mhif->ipc_regs.ipc_mdata_offset);

> +		rte_bbdev_log(ERR, "gul_hif size=%lx", sizeof(struct

> gul_hif));

> +		return IPC_MD_SZ_MISS_MATCH;

> +	}

> +

> +	ipc_priv->instance = (ipc_instance_t *)

> +		(&ipc_md->instance_list[ipc_priv->instance_id]);

> +

> +	rte_bbdev_log_debug("finish host init");

> +

> +	priv->ipc_priv = ipc_priv;

> +

> +	return 0;

> +

> +err:

> +	rte_free(hp);

> +	rte_free(ipc_priv);

> +	rte_free(ipc_priv_ch);

> +	if (dev_mem)

> +		close(dev_mem);

> +	if (dev_ipc)

> +		close(dev_ipc);

> +

> +	return ret;

> +}

> +

>  static inline int

>  parse_u16_arg(const char *key, const char *value, void *extra_args)  { @@ -

> 123,6 +666,7 @@ la12xx_bbdev_create(struct rte_vdev_device *vdev,

>  	struct rte_bbdev *bbdev;

>  	const char *name = rte_vdev_device_name(vdev);

>  	struct bbdev_la12xx_private *priv;

> +	int ret;

> 

>  	PMD_INIT_FUNC_TRACE();

> 

> @@ -152,7 +696,13 @@ la12xx_bbdev_create(struct rte_vdev_device

> *vdev,

> 

>  	rte_bbdev_log(INFO, "Setting Up %s: DevId=%d, ModemId=%d",

>  				name, bbdev->data->dev_id, priv-

> >modem_id);

> -	bbdev->dev_ops = NULL;

> +	ret = setup_la12xx_dev(bbdev);

> +	if (ret) {

> +		rte_bbdev_log(ERR, "IPC Setup failed for %s", name);

> +		rte_free(bbdev->data->dev_private);

> +		return ret;

> +	}

> +	bbdev->dev_ops = &pmd_ops;

>  	bbdev->device = &vdev->device;

>  	bbdev->data->socket_id = 0;

>  	bbdev->intr_handle = NULL;

> diff --git a/drivers/baseband/la12xx/bbdev_la12xx.h

> b/drivers/baseband/la12xx/bbdev_la12xx.h

> index 5228502331..49c37fe2fe 100644

> --- a/drivers/baseband/la12xx/bbdev_la12xx.h

> +++ b/drivers/baseband/la12xx/bbdev_la12xx.h

> @@ -5,16 +5,10 @@

>  #ifndef __BBDEV_LA12XX_H__

>  #define __BBDEV_LA12XX_H__

> 

> -#define BBDEV_IPC_ENC_OP_TYPE	1

> -#define BBDEV_IPC_DEC_OP_TYPE	2

> -

> -#define MAX_LDPC_ENC_FECA_QUEUES	4

> -#define MAX_LDPC_DEC_FECA_QUEUES	4

> -

>  #define MAX_CHANNEL_DEPTH 16

>  /* private data structure */

>  struct bbdev_la12xx_private {

> -	void *ipc_priv;

> +	ipc_userspace_t *ipc_priv;

>  	uint8_t num_valid_queues;

>  	uint8_t max_nb_queues;

>  	uint8_t num_ldpc_enc_queues;

> @@ -52,5 +46,6 @@ struct bbdev_la12xx_q_priv {

> 

>  #define lower_32_bits(x) ((uint32_t)((uint64_t)x))  #define

> upper_32_bits(x) ((uint32_t)(((uint64_t)(x) >> 16) >> 16))

> -

> +#define join_32_bits(upper, lower) \

> +	((size_t)(((uint64_t)(upper) << 32) | (uint32_t)(lower)))

>  #endif

> diff --git a/drivers/baseband/la12xx/bbdev_la12xx_ipc.h

> b/drivers/baseband/la12xx/bbdev_la12xx_ipc.h

> index 9aa5562981..5f613fb087 100644

> --- a/drivers/baseband/la12xx/bbdev_la12xx_ipc.h

> +++ b/drivers/baseband/la12xx/bbdev_la12xx_ipc.h

> @@ -4,9 +4,182 @@

>  #ifndef __BBDEV_LA12XX_IPC_H__

>  #define __BBDEV_LA12XX_IPC_H__

> 

> +#define LA12XX_MAX_QUEUES 20

> +#define HOST_RX_QUEUEID_OFFSET LA12XX_MAX_QUEUES

> +

> +/** No. of max channel per instance */

> +#define IPC_MAX_CHANNEL_COUNT	(64)

> +

>  /** No. of max channel per instance */

>  #define IPC_MAX_DEPTH	(16)

> 

> +/** No. of max IPC instance per modem */

> +#define IPC_MAX_INSTANCE_COUNT	(1)

> +

> +/** Error codes */

> +#define IPC_SUCCESS		(0) /** IPC operation success */

> +#define IPC_INPUT_INVALID	(-1) /** Invalid input to API */

> +#define IPC_CH_INVALID		(-2) /** Channel no is invalid */

> +#define IPC_INSTANCE_INVALID	(-3) /** Instance no is invalid */

> +#define IPC_MEM_INVALID		(-4) /** Insufficient memory */

> +#define IPC_CH_FULL		(-5) /** Channel is full */

> +#define IPC_CH_EMPTY		(-6) /** Channel is empty */

> +#define IPC_BL_EMPTY		(-7) /** Free buffer list is empty */

> +#define IPC_BL_FULL		(-8) /** Free buffer list is full */

> +#define IPC_HOST_BUF_ALLOC_FAIL	(-9) /** DPDK malloc fail */

> +#define IPC_MD_SZ_MISS_MATCH	(-10) /** META DATA size in mhif

> miss matched*/

> +#define IPC_MALLOC_FAIL		(-11) /** system malloc fail */

> +#define IPC_IOCTL_FAIL		(-12) /** IOCTL call failed */

> +#define IPC_MMAP_FAIL		(-14) /** MMAP fail */

> +#define IPC_OPEN_FAIL		(-15) /** OPEN fail */

> +#define IPC_EVENTFD_FAIL	(-16) /** eventfd initialization failed */

> +#define IPC_NOT_IMPLEMENTED	(-17) /** IPC feature is not

> implemented yet*/

> +

> +#define SET_HIF_HOST_RDY(hif, RDY_MASK) (hif->host_ready |=

> RDY_MASK)

> +#define CHK_HIF_MOD_RDY(hif, RDY_MASK) (hif->mod_ready &

> RDY_MASK)

> +

> +/* Host Ready bits */

> +#define HIF_HOST_READY_HOST_REGIONS	(1 << 0)

> +#define HIF_HOST_READY_IPC_LIB		(1 << 12)

> +#define HIF_HOST_READY_IPC_APP		(1 << 13)

> +#define HIF_HOST_READY_FECA		(1 << 14)

> +

> +/* Modem Ready bits */

> +#define HIF_MOD_READY_IPC_LIB		(1 << 5)

> +#define HIF_MOD_READY_IPC_APP		(1 << 6)

> +#define HIF_MOD_READY_FECA		(1 << 7)

> +

> +typedef void *ipc_t;

> +

> +struct ipc_msg {

> +	int chid;

> +	void *addr;

> +	uint32_t len;

> +	uint8_t flags;

> +};

> +

> +typedef struct {

> +	uint64_t host_phys;

> +	uint32_t modem_phys;

> +	void    *host_vaddr;

> +	uint32_t size;

> +} mem_range_t;

> +

> +#define GUL_IPC_MAGIC	'R'

> +

> +#define IOCTL_GUL_IPC_GET_SYS_MAP _IOW(GUL_IPC_MAGIC, 1, struct

> ipc_msg

> +*) #define IOCTL_GUL_IPC_CHANNEL_REGISTER _IOWR(GUL_IPC_MAGIC,

> 4,

> +struct ipc_msg *) #define IOCTL_GUL_IPC_CHANNEL_DEREGISTER \

> +	_IOWR(GUL_IPC_MAGIC, 5, struct ipc_msg *) #define

> +IOCTL_GUL_IPC_CHANNEL_RAISE_INTERRUPT _IOW(GUL_IPC_MAGIC, 6,

> int *)

> +

> +/** buffer ring common metadata */

> +typedef struct ipc_bd_ring_md {

> +	volatile uint32_t pi;		/**< Producer index and flag (MSB)

> +					  *  which flip for each Ring wrapping

> +					  */

> +	volatile uint32_t ci;		/**< Consumer index and flag (MSB)

> +					  *  which flip for each Ring wrapping

> +					  */

> +	uint32_t ring_size;	/**< depth (Used to roll-over pi/ci) */

> +	uint32_t msg_size;	/**< Size of the each buffer */

> +} __rte_packed ipc_br_md_t;

> +

> +/** IPC buffer descriptor */

> +typedef struct ipc_buffer_desc {

> +	union {

> +		uint64_t host_virt;	/**< msg's host virtual address */

> +		struct {

> +			uint32_t host_virt_l;

> +			uint32_t host_virt_h;

> +		};

> +	};

> +	uint32_t modem_ptr;	/**< msg's modem physical address */

> +	uint32_t len;		/**< msg len */

> +} __rte_packed ipc_bd_t;

> +

> +typedef struct ipc_channel {

> +	uint32_t ch_id;		/**< Channel id */

> +	ipc_br_md_t md;			/**< Metadata for BD ring */

> +	ipc_bd_t bd_h[IPC_MAX_DEPTH];	/**< Buffer Descriptor on

> Host */

> +	ipc_bd_t bd_m[IPC_MAX_DEPTH];	/**< Buffer Descriptor on

> Modem */

> +	uint32_t op_type;		/**< Type of the BBDEV operation

> +					  * supported on this channel

> +					  */

> +	uint32_t depth;			/**< Channel depth */

> +	uint32_t feca_blk_id;	/**< FECA Transport Block ID for processing

> */

> +	uint32_t la12xx_core_id;/**< LA12xx core ID on which this will be

> +				  * scheduled

> +				  */

> +	uint32_t feca_input_circ_size;	/**< FECA transport block input

> +					  * circular buffer size

> +					  */

> +	uint32_t host_ipc_params;	/**< Address for host IPC

> parameters */

> +} __rte_packed ipc_ch_t;

> +

> +typedef struct ipc_instance {

> +	uint32_t instance_id;		/**< instance id, use to init this

> +					  * instance by ipc_init API

> +					  */

> +	uint32_t initialized;		/**< Set in ipc_init */

> +	ipc_ch_t ch_list[IPC_MAX_CHANNEL_COUNT];

> +		/**< Channel descriptors in this instance */ } __rte_packed

> +ipc_instance_t;

> +

> +typedef struct ipc_metadata {

> +	uint32_t ipc_host_signature; /**< IPC host signature, Set by host/L2

> */

> +	uint32_t ipc_geul_signature; /**< IPC geul signature, Set by modem

> */

> +	ipc_instance_t instance_list[IPC_MAX_INSTANCE_COUNT];

> +} __rte_packed ipc_metadata_t;

> +

> +typedef struct ipc_channel_us_priv {

> +	int32_t		eventfd;

> +	uint32_t	channel_id;

> +	/* In flight packets status for buffer list. */

> +	uint8_t		bufs_inflight[IPC_MAX_DEPTH];

> +} ipc_channel_us_t;

> +

> +typedef struct {

> +	uint64_t host_phys;

> +	uint32_t modem_phys;

> +	uint32_t size;

> +} mem_strt_addr_t;

> +

> +typedef struct {

> +	mem_strt_addr_t modem_ccsrbar;

> +	mem_strt_addr_t peb_start; /* PEB meta data */

> +	mem_strt_addr_t mhif_start; /* MHIF meta daat */

> +	mem_strt_addr_t hugepg_start; /* Modem to access hugepage */ }

> +sys_map_t;

> +

> +typedef struct ipc_priv_t {

> +	int instance_id;

> +	int dev_ipc;

> +	int dev_mem;

> +	sys_map_t sys_map;

> +	mem_range_t modem_ccsrbar;

> +	mem_range_t peb_start;

> +	mem_range_t mhif_start;

> +	mem_range_t hugepg_start;

> +	ipc_channel_us_t *channels[IPC_MAX_CHANNEL_COUNT];

> +	ipc_instance_t	*instance;

> +	ipc_instance_t	*instance_bk;

> +} ipc_userspace_t;

> +

> +/** Structure specifying enqueue operation (enqueue at LA1224) */

> +struct bbdev_ipc_enqueue_op {

> +	/** Status of operation that was performed */

> +	int32_t status;

> +	/** CRC Status of SD operation that was performed */

> +	int32_t crc_stat_addr;

> +	/** HARQ Output buffer memory length for Shared Decode.

> +	 * Filled by LA12xx.

> +	 */

> +	uint32_t out_len;

> +	/** Reserved (for 8 byte alignment) */

> +	uint32_t rsvd;

> +};

> +

>  /* This shared memory would be on the host side which have copy of some

>   * of the parameters which are also part of Shared BD ring. Read access

>   * of these parameters from the host side would not be over PCI.

> @@ -14,7 +187,21 @@

>  typedef struct host_ipc_params {

>  	volatile uint32_t pi;

>  	volatile uint32_t ci;

> -	volatile uint32_t modem_ptr[IPC_MAX_DEPTH];

> +	volatile uint32_t bd_m_modem_ptr[IPC_MAX_DEPTH];

>  } __rte_packed host_ipc_params_t;

> 

> +struct hif_ipc_regs {

> +	uint32_t ipc_mdata_offset;

> +	uint32_t ipc_mdata_size;

> +} __rte_packed;

> +

> +struct gul_hif {

> +	uint32_t ver;

> +	uint32_t hif_ver;

> +	uint32_t status;

> +	volatile uint32_t host_ready;

> +	volatile uint32_t mod_ready;

> +	struct hif_ipc_regs ipc_regs;

> +} __rte_packed;

> +

>  #endif

> --

> 2.17.1
Nipun Gupta May 13, 2021, 11:01 a.m. UTC | #2
> > +		.type   = RTE_BBDEV_OP_LDPC_DEC,

> > +		.cap.ldpc_dec = {

> > +			.capability_flags =

> > +				RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK |

> > +				RTE_BBDEV_LDPC_LLR_COMPRESSION |

> 

> Are you sure you support the 6bits LLR compression option? I don't see it being

> used in the PMD below. Nor in doc.

> Let me know if you are unclear what that flag really mean.


We support LLR compression in the Hardware by default.
We do not need to call ' ldpc_input_llr_scaling' API in testbbdev.

Regards,
Nipun
Chautru, Nicolas May 13, 2021, 2:51 p.m. UTC | #3
Hi Nipun, 

> -----Original Message-----

> From: Nipun Gupta <nipun.gupta@nxp.com>

> Sent: Thursday, May 13, 2021 4:02 AM

> To: Chautru, Nicolas <nicolas.chautru@intel.com>; Hemant Agrawal

> <hemant.agrawal@nxp.com>; dev@dpdk.org; gakhil@marvell.com

> Cc: david.marchand@redhat.com

> Subject: RE: [PATCH v4 5/8] baseband/la12xx: add queue and modem config

> support

> 

> 

> 

> > > +		.type   = RTE_BBDEV_OP_LDPC_DEC,

> > > +		.cap.ldpc_dec = {

> > > +			.capability_flags =

> > > +				RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK |

> > > +				RTE_BBDEV_LDPC_LLR_COMPRESSION |

> >

> > Are you sure you support the 6bits LLR compression option? I don't see

> > it being used in the PMD below. Nor in doc.

> > Let me know if you are unclear what that flag really mean.

> 

> We support LLR compression in the Hardware by default.

> We do not need to call ' ldpc_input_llr_scaling' API in testbbdev.

> 


So you always assume to pack up the input data as 6 bits back-to-back? You understand what that feature mean?
My concern is that you would not support current API and many unit test would fail then for you PMD. 
Are you able to run the bbdev-test and see failures (all tests should be either skipped : missing capability) or passing


> Regards,

> Nipun
Nipun Gupta May 17, 2021, 5 p.m. UTC | #4
Hi,

> -----Original Message-----

> From: Chautru, Nicolas <nicolas.chautru@intel.com>

> Sent: Thursday, May 13, 2021 8:21 PM

> To: Nipun Gupta <nipun.gupta@nxp.com>; Hemant Agrawal

> <hemant.agrawal@nxp.com>; dev@dpdk.org; gakhil@marvell.com

> Cc: david.marchand@redhat.com

> Subject: RE: [PATCH v4 5/8] baseband/la12xx: add queue and modem config

> support

> 

> Hi Nipun,

> 

> > -----Original Message-----

> > From: Nipun Gupta <nipun.gupta@nxp.com>

> > Sent: Thursday, May 13, 2021 4:02 AM

> > To: Chautru, Nicolas <nicolas.chautru@intel.com>; Hemant Agrawal

> > <hemant.agrawal@nxp.com>; dev@dpdk.org; gakhil@marvell.com

> > Cc: david.marchand@redhat.com

> > Subject: RE: [PATCH v4 5/8] baseband/la12xx: add queue and modem config

> > support

> >

> >

> >

> > > > +		.type   = RTE_BBDEV_OP_LDPC_DEC,

> > > > +		.cap.ldpc_dec = {

> > > > +			.capability_flags =

> > > > +				RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK |

> > > > +				RTE_BBDEV_LDPC_LLR_COMPRESSION |

> > >

> > > Are you sure you support the 6bits LLR compression option? I don't see

> > > it being used in the PMD below. Nor in doc.

> > > Let me know if you are unclear what that flag really mean.

> >

> > We support LLR compression in the Hardware by default.

> > We do not need to call ' ldpc_input_llr_scaling' API in testbbdev.

> >

> 

> So you always assume to pack up the input data as 6 bits back-to-back? You

> understand what that feature mean?

> My concern is that you would not support current API and many unit test would

> fail then for you PMD.

> Are you able to run the bbdev-test and see failures (all tests should be either

> skipped : missing capability) or passing


Our test vectors pass with our driver (Performance, validation, Latency and offload
cost tests), provided we do not call 'ldpc_input_llr_scaling' API.
I am not sure why this API is being called in testbbdev. Can you provide more
insight on why this API is doing and why does it modifies the input data?

> 

> 

> > Regards,

> > Nipun
Chautru, Nicolas May 17, 2021, 5:53 p.m. UTC | #5
> -----Original Message-----

> From: Nipun Gupta <nipun.gupta@nxp.com>

> Sent: Monday, May 17, 2021 10:00 AM

> 

> Hi,

> 

> > -----Original Message-----

> > From: Chautru, Nicolas <nicolas.chautru@intel.com>

> > Sent: Thursday, May 13, 2021 8:21 PM

> > To: Nipun Gupta <nipun.gupta@nxp.com>; Hemant Agrawal

> > <hemant.agrawal@nxp.com>; dev@dpdk.org; gakhil@marvell.com

> > Cc: david.marchand@redhat.com

> > Subject: RE: [PATCH v4 5/8] baseband/la12xx: add queue and modem

> > config support

> >

> > Hi Nipun,

> >

> > > -----Original Message-----

> > > From: Nipun Gupta <nipun.gupta@nxp.com>

> > > Sent: Thursday, May 13, 2021 4:02 AM

> > > To: Chautru, Nicolas <nicolas.chautru@intel.com>; Hemant Agrawal

> > > <hemant.agrawal@nxp.com>; dev@dpdk.org; gakhil@marvell.com

> > > Cc: david.marchand@redhat.com

> > > Subject: RE: [PATCH v4 5/8] baseband/la12xx: add queue and modem

> > > config support

> > >

> > >

> > >

> > > > > +		.type   = RTE_BBDEV_OP_LDPC_DEC,

> > > > > +		.cap.ldpc_dec = {

> > > > > +			.capability_flags =

> > > > > +

> 	RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK |

> > > > > +

> 	RTE_BBDEV_LDPC_LLR_COMPRESSION |

> > > >

> > > > Are you sure you support the 6bits LLR compression option? I don't

> > > > see it being used in the PMD below. Nor in doc.

> > > > Let me know if you are unclear what that flag really mean.

> > >

> > > We support LLR compression in the Hardware by default.

> > > We do not need to call ' ldpc_input_llr_scaling' API in testbbdev.

> > >

> >

> > So you always assume to pack up the input data as 6 bits back-to-back?

> > You understand what that feature mean?

> > My concern is that you would not support current API and many unit

> > test would fail then for you PMD.

> > Are you able to run the bbdev-test and see failures (all tests should

> > be either skipped : missing capability) or passing

> 

> Our test vectors pass with our driver (Performance, validation, Latency and

> offload cost tests), provided we do not call 'ldpc_input_llr_scaling' API.

> I am not sure why this API is being called in testbbdev. Can you provide more

> insight on why this API is doing and why does it modifies the input data?


What LLR numerical representation are you doing for your PMD/HW.
Ie how many integer bits, how many decimals bits. 
This is to be able to support seamless different decoder implementation which have different assumptions or implementation. 

> 

> >

> >

> > > Regards,

> > > Nipun
Nipun Gupta May 19, 2021, 6:43 p.m. UTC | #6
> -----Original Message-----

> From: Chautru, Nicolas <nicolas.chautru@intel.com>

> Sent: Monday, May 17, 2021 11:23 PM

> To: Nipun Gupta <nipun.gupta@nxp.com>; Hemant Agrawal

> <hemant.agrawal@nxp.com>; dev@dpdk.org; gakhil@marvell.com

> Cc: david.marchand@redhat.com

> Subject: RE: [PATCH v4 5/8] baseband/la12xx: add queue and modem config

> support

> 

> 

> 

> > -----Original Message-----

> > From: Nipun Gupta <nipun.gupta@nxp.com>

> > Sent: Monday, May 17, 2021 10:00 AM

> >

> > Hi,

> >

> > > -----Original Message-----

> > > From: Chautru, Nicolas <nicolas.chautru@intel.com>

> > > Sent: Thursday, May 13, 2021 8:21 PM

> > > To: Nipun Gupta <nipun.gupta@nxp.com>; Hemant Agrawal

> > > <hemant.agrawal@nxp.com>; dev@dpdk.org; gakhil@marvell.com

> > > Cc: david.marchand@redhat.com

> > > Subject: RE: [PATCH v4 5/8] baseband/la12xx: add queue and modem

> > > config support

> > >

> > > Hi Nipun,

> > >

> > > > -----Original Message-----

> > > > From: Nipun Gupta <nipun.gupta@nxp.com>

> > > > Sent: Thursday, May 13, 2021 4:02 AM

> > > > To: Chautru, Nicolas <nicolas.chautru@intel.com>; Hemant Agrawal

> > > > <hemant.agrawal@nxp.com>; dev@dpdk.org; gakhil@marvell.com

> > > > Cc: david.marchand@redhat.com

> > > > Subject: RE: [PATCH v4 5/8] baseband/la12xx: add queue and modem

> > > > config support

> > > >

> > > >

> > > >

> > > > > > +		.type   = RTE_BBDEV_OP_LDPC_DEC,

> > > > > > +		.cap.ldpc_dec = {

> > > > > > +			.capability_flags =

> > > > > > +

> > 	RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK |

> > > > > > +

> > 	RTE_BBDEV_LDPC_LLR_COMPRESSION |

> > > > >

> > > > > Are you sure you support the 6bits LLR compression option? I don't

> > > > > see it being used in the PMD below. Nor in doc.

> > > > > Let me know if you are unclear what that flag really mean.

> > > >

> > > > We support LLR compression in the Hardware by default.

> > > > We do not need to call ' ldpc_input_llr_scaling' API in testbbdev.

> > > >

> > >

> > > So you always assume to pack up the input data as 6 bits back-to-back?

> > > You understand what that feature mean?

> > > My concern is that you would not support current API and many unit

> > > test would fail then for you PMD.

> > > Are you able to run the bbdev-test and see failures (all tests should

> > > be either skipped : missing capability) or passing

> >

> > Our test vectors pass with our driver (Performance, validation, Latency and

> > offload cost tests), provided we do not call 'ldpc_input_llr_scaling' API.

> > I am not sure why this API is being called in testbbdev. Can you provide more

> > insight on why this API is doing and why does it modifies the input data?

> 

> What LLR numerical representation are you doing for your PMD/HW.

> Ie how many integer bits, how many decimals bits.

> This is to be able to support seamless different decoder implementation which

> have different assumptions or implementation.


It is 8 integer bits and 1 decimal bit for our hardware. Will fix our code.

Thanks,
Nipun

> 

> >

> > >

> > >

> > > > Regards,

> > > > Nipun
diff mbox series

Patch

diff --git a/doc/guides/bbdevs/index.rst b/doc/guides/bbdevs/index.rst
index 4445cbd1b0..cedd706fa6 100644
--- a/doc/guides/bbdevs/index.rst
+++ b/doc/guides/bbdevs/index.rst
@@ -14,3 +14,4 @@  Baseband Device Drivers
     fpga_lte_fec
     fpga_5gnr_fec
     acc100
+    la12xx
diff --git a/doc/guides/bbdevs/la12xx.rst b/doc/guides/bbdevs/la12xx.rst
new file mode 100644
index 0000000000..3c9ac5c047
--- /dev/null
+++ b/doc/guides/bbdevs/la12xx.rst
@@ -0,0 +1,81 @@ 
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright 2021 NXP
+
+NXP LA12xx Poll Mode Driver
+=======================================
+
+The BBDEV LA12xx poll mode driver (PMD) supports an implementation for
+offloading High Phy processing functions like LDPC Encode / Decode 5GNR wireless
+acceleration function, using PCI based LA12xx Software defined radio.
+
+More information can be found at `NXP Official Website
+<https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/layerscape-processors/layerscape-access-la1200-programmable-baseband-processor:LA1200>`_.
+
+Features
+--------
+
+LA12xx PMD supports the following features:
+
+- Maximum of 8 UL queues
+- Maximum of 8 DL queues
+- PCIe Gen-3 x8 Interface
+- MSI-X
+
+Installation
+------------
+
+Section 3 of the DPDK manual provides instructions on installing and compiling DPDK.
+
+DPDK requires hugepages to be configured as detailed in section 2 of the DPDK manual.
+
+Initialization
+--------------
+
+The device can be listed on the host console with:
+
+
+Use the following lspci command to get the multiple LA12xx processor ids. The
+device ID of the LA12xx baseband processor is "1c30".
+
+.. code-block:: console
+
+  sudo lspci -nn
+
+...
+0001:01:00.0 Power PC [0b20]: Freescale Semiconductor Inc Device [1957:1c30] (
+rev 10)
+...
+0002:01:00.0 Power PC [0b20]: Freescale Semiconductor Inc Device [1957:1c30] (
+rev 10)
+
+
+Prerequisites
+-------------
+
+Currently supported by DPDK:
+
+- NXP LA1224 BSP **1.0+**.
+- NXP LA1224 PCIe Modem card connected to ARM host.
+
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+
+* Use dev arg option ``modem=0`` to identify the modem instance for a given
+  device. This is required only if more than 1 modem cards are attached to host.
+  this is optional and the default value is 0.
+  e.g. ``--vdev=baseband_la12xx,modem=0``
+
+* Use dev arg option ``max_nb_queues=x`` to specify the maximum number of queues
+  to be used for communication with offload device i.e. modem. default is 16.
+  e.g. ``--vdev=baseband_la12xx,max_nb_queues=4``
+
+Enabling logs
+-------------
+
+For enabling logs, use the following EAL parameter:
+
+.. code-block:: console
+
+   ./your_bbdev_application <EAL args> --log-level=la12xx:<level>
+
+Using ``bb.la12xx`` as log matching criteria, all Baseband PMD logs can be
+enabled which are lower than logging ``level``.
diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst
index b3224dc332..4e0b62debb 100644
--- a/doc/guides/rel_notes/release_21_05.rst
+++ b/doc/guides/rel_notes/release_21_05.rst
@@ -236,6 +236,11 @@  New Features
   the hash function used in NICs to spread the traffic among the queues.
   It can be used to get predictable mapping of the flows.
 
+* **Added NXP LA12xx baseband PMD.**
+
+  * Added a new baseband PMD driver for NXP LA12xx Software defined radio.
+  * See the :doc:`../bbdevs/la12xx` for more details.
+
 * **Updated testpmd.**
 
   * Added a command line option to configure forced speed for Ethernet port.
diff --git a/drivers/baseband/la12xx/bbdev_la12xx.c b/drivers/baseband/la12xx/bbdev_la12xx.c
index f26f3f2a08..1fdeca279e 100644
--- a/drivers/baseband/la12xx/bbdev_la12xx.c
+++ b/drivers/baseband/la12xx/bbdev_la12xx.c
@@ -3,6 +3,11 @@ 
  */
 
 #include <string.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <dirent.h>
 
 #include <rte_common.h>
 #include <rte_bus_vdev.h>
@@ -31,11 +36,549 @@  struct bbdev_la12xx_params {
 #define LA12XX_VDEV_MODEM_ID_ARG	"modem"
 #define LA12XX_MAX_MODEM 4
 
+#define LA12XX_MAX_CORES	4
+#define LA12XX_LDPC_ENC_CORE	0
+#define LA12XX_LDPC_DEC_CORE	1
+
+#define LA12XX_MAX_LDPC_ENC_QUEUES	4
+#define LA12XX_MAX_LDPC_DEC_QUEUES	4
+
 static const char * const bbdev_la12xx_valid_params[] = {
 	LA12XX_MAX_NB_QUEUES_ARG,
 	LA12XX_VDEV_MODEM_ID_ARG,
 };
 
+static const struct rte_bbdev_op_cap bbdev_capabilities[] = {
+	{
+		.type   = RTE_BBDEV_OP_LDPC_ENC,
+		.cap.ldpc_enc = {
+			.capability_flags =
+					RTE_BBDEV_LDPC_CRC_24A_ATTACH |
+					RTE_BBDEV_LDPC_CRC_24B_ATTACH,
+			.num_buffers_src =
+					RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+			.num_buffers_dst =
+					RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+		}
+	},
+	{
+		.type   = RTE_BBDEV_OP_LDPC_DEC,
+		.cap.ldpc_dec = {
+			.capability_flags =
+				RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK |
+				RTE_BBDEV_LDPC_LLR_COMPRESSION |
+					RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK |
+					RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP,
+			.num_buffers_src =
+					RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+			.num_buffers_hard_out =
+					RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+		}
+	},
+	RTE_BBDEV_END_OF_CAPABILITIES_LIST()
+};
+
+static struct rte_bbdev_queue_conf default_queue_conf = {
+	.queue_size = MAX_CHANNEL_DEPTH,
+};
+
+/* Get device info */
+static void
+la12xx_info_get(struct rte_bbdev *dev __rte_unused,
+		struct rte_bbdev_driver_info *dev_info)
+{
+	PMD_INIT_FUNC_TRACE();
+
+	dev_info->driver_name = RTE_STR(DRIVER_NAME);
+	dev_info->max_num_queues = LA12XX_MAX_QUEUES;
+	dev_info->queue_size_lim = MAX_CHANNEL_DEPTH;
+	dev_info->hardware_accelerated = true;
+	dev_info->max_dl_queue_priority = 0;
+	dev_info->max_ul_queue_priority = 0;
+	dev_info->default_queue_conf = default_queue_conf;
+	dev_info->capabilities = bbdev_capabilities;
+	dev_info->cpu_flag_reqs = NULL;
+	dev_info->min_alignment = 64;
+
+	rte_bbdev_log_debug("got device info from %u", dev->data->dev_id);
+}
+
+/* Release queue */
+static int
+la12xx_queue_release(struct rte_bbdev *dev, uint16_t q_id)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(q_id);
+
+	PMD_INIT_FUNC_TRACE();
+
+	/* TODO: Implement */
+
+	return 0;
+}
+
+#define HUGEPG_OFFSET(A) \
+		((uint64_t) ((unsigned long) (A) \
+		- ((uint64_t)ipc_priv->hugepg_start.host_vaddr)))
+
+static int ipc_queue_configure(uint32_t channel_id,
+		ipc_t instance, struct bbdev_la12xx_q_priv *q_priv)
+{
+	ipc_userspace_t *ipc_priv = (ipc_userspace_t *)instance;
+	ipc_instance_t *ipc_instance = ipc_priv->instance;
+	ipc_ch_t *ch;
+	void *vaddr;
+	uint32_t i = 0;
+	uint32_t msg_size = sizeof(struct bbdev_ipc_enqueue_op);
+
+	PMD_INIT_FUNC_TRACE();
+
+	rte_bbdev_log_debug("%x %p", ipc_instance->initialized,
+		ipc_priv->instance);
+	ch = &(ipc_instance->ch_list[channel_id]);
+
+	rte_bbdev_log_debug("channel: %u, depth: %u, msg size: %u",
+		channel_id, q_priv->queue_size, msg_size);
+
+	/* Start init of channel */
+	ch->md.ring_size = rte_cpu_to_be_32(q_priv->queue_size);
+	ch->md.pi = 0;
+	ch->md.ci = 0;
+	ch->md.msg_size = msg_size;
+	for (i = 0; i < q_priv->queue_size; i++) {
+		vaddr = rte_malloc(NULL, msg_size, RTE_CACHE_LINE_SIZE);
+		if (!vaddr)
+			return IPC_HOST_BUF_ALLOC_FAIL;
+		/* Only offset now */
+		ch->bd_h[i].modem_ptr =
+			rte_cpu_to_be_32(HUGEPG_OFFSET(vaddr));
+		ch->bd_h[i].host_virt_l = lower_32_bits(vaddr);
+		ch->bd_h[i].host_virt_h = upper_32_bits(vaddr);
+		q_priv->msg_ch_vaddr[i] = vaddr;
+		/* Not sure use of this len may be for CRC*/
+		ch->bd_h[i].len = 0;
+	}
+	ch->host_ipc_params =
+		rte_cpu_to_be_32(HUGEPG_OFFSET(q_priv->host_params));
+
+	rte_bbdev_log_debug("Channel configured");
+	return IPC_SUCCESS;
+}
+
+static int
+la12xx_e200_queue_setup(struct rte_bbdev *dev,
+		struct bbdev_la12xx_q_priv *q_priv)
+{
+	struct bbdev_la12xx_private *priv = dev->data->dev_private;
+	ipc_userspace_t *ipc_priv = priv->ipc_priv;
+	struct gul_hif *mhif;
+	ipc_metadata_t *ipc_md;
+	ipc_ch_t *ch;
+	int instance_id = 0, i;
+	int ret;
+
+	PMD_INIT_FUNC_TRACE();
+
+	switch (q_priv->op_type) {
+	case RTE_BBDEV_OP_LDPC_ENC:
+		q_priv->la12xx_core_id = LA12XX_LDPC_ENC_CORE;
+		break;
+	case RTE_BBDEV_OP_LDPC_DEC:
+		q_priv->la12xx_core_id = LA12XX_LDPC_DEC_CORE;
+		break;
+	default:
+		rte_bbdev_log(ERR, "Unsupported op type\n");
+		return -1;
+	}
+
+	mhif = (struct gul_hif *)ipc_priv->mhif_start.host_vaddr;
+	/* offset is from start of PEB */
+	ipc_md = (ipc_metadata_t *)((uint64_t)ipc_priv->peb_start.host_vaddr +
+		mhif->ipc_regs.ipc_mdata_offset);
+	ch = &ipc_md->instance_list[instance_id].ch_list[q_priv->q_id];
+
+	if (q_priv->q_id < priv->num_valid_queues) {
+		ipc_br_md_t *md = &(ch->md);
+
+		q_priv->feca_blk_id = rte_cpu_to_be_32(ch->feca_blk_id);
+		q_priv->feca_blk_id_be32 = ch->feca_blk_id;
+		q_priv->host_pi = rte_be_to_cpu_32(md->pi);
+		q_priv->host_ci = rte_be_to_cpu_32(md->ci);
+		q_priv->host_params = (host_ipc_params_t *)
+			(rte_be_to_cpu_32(ch->host_ipc_params) +
+			((uint64_t)ipc_priv->hugepg_start.host_vaddr));
+
+		for (i = 0; i < q_priv->queue_size; i++) {
+			uint32_t h, l;
+
+			h = ch->bd_h[i].host_virt_h;
+			l = ch->bd_h[i].host_virt_l;
+			q_priv->msg_ch_vaddr[i] = (void *)join_32_bits(h, l);
+		}
+
+		rte_bbdev_log(WARNING,
+			"Queue [%d] already configured, not configuring again",
+			q_priv->q_id);
+		return 0;
+	}
+
+	rte_bbdev_log_debug("setting up queue %d", q_priv->q_id);
+
+	/* Call ipc_configure_channel */
+	ret = ipc_queue_configure(q_priv->q_id, ipc_priv, q_priv);
+	if (ret) {
+		rte_bbdev_log(ERR, "Unable to setup queue (%d) (err=%d)",
+		       q_priv->q_id, ret);
+		return ret;
+	}
+
+	/* Set queue properties for LA12xx device */
+	switch (q_priv->op_type) {
+	case RTE_BBDEV_OP_LDPC_ENC:
+		if (priv->num_ldpc_enc_queues >= LA12XX_MAX_LDPC_ENC_QUEUES) {
+			rte_bbdev_log(ERR,
+				"num_ldpc_enc_queues reached max value");
+			return -1;
+		}
+		ch->la12xx_core_id =
+			rte_cpu_to_be_32(LA12XX_LDPC_ENC_CORE);
+		ch->feca_blk_id = rte_cpu_to_be_32(priv->num_ldpc_enc_queues++);
+		break;
+	case RTE_BBDEV_OP_LDPC_DEC:
+		if (priv->num_ldpc_dec_queues >= LA12XX_MAX_LDPC_DEC_QUEUES) {
+			rte_bbdev_log(ERR,
+				"num_ldpc_dec_queues reached max value");
+			return -1;
+		}
+		ch->la12xx_core_id =
+			rte_cpu_to_be_32(LA12XX_LDPC_DEC_CORE);
+		ch->feca_blk_id = rte_cpu_to_be_32(priv->num_ldpc_dec_queues++);
+		break;
+	default:
+		rte_bbdev_log(ERR, "Not supported op type\n");
+		return -1;
+	}
+	ch->op_type = rte_cpu_to_be_32(q_priv->op_type);
+	ch->depth = rte_cpu_to_be_32(q_priv->queue_size);
+
+	/* Store queue config here */
+	q_priv->feca_blk_id = rte_cpu_to_be_32(ch->feca_blk_id);
+	q_priv->feca_blk_id_be32 = ch->feca_blk_id;
+
+	return 0;
+}
+
+/* Setup a queue */
+static int
+la12xx_queue_setup(struct rte_bbdev *dev, uint16_t q_id,
+		const struct rte_bbdev_queue_conf *queue_conf)
+{
+	struct bbdev_la12xx_private *priv = dev->data->dev_private;
+	struct rte_bbdev_queue_data *q_data;
+	struct bbdev_la12xx_q_priv *q_priv;
+	int ret;
+
+	PMD_INIT_FUNC_TRACE();
+
+	/* Move to setup_queues callback */
+	q_data = &dev->data->queues[q_id];
+	q_data->queue_private = rte_zmalloc(NULL,
+		sizeof(struct bbdev_la12xx_q_priv), 0);
+	if (!q_data->queue_private) {
+		rte_bbdev_log(ERR, "Memory allocation failed for qpriv");
+		return -ENOMEM;
+	}
+	q_priv = q_data->queue_private;
+	q_priv->q_id = q_id;
+	q_priv->bbdev_priv = dev->data->dev_private;
+	q_priv->queue_size = queue_conf->queue_size;
+	q_priv->op_type = queue_conf->op_type;
+
+	ret = la12xx_e200_queue_setup(dev, q_priv);
+	if (ret) {
+		rte_bbdev_log(ERR, "e200_queue_setup failed for qid: %d",
+				     q_id);
+		return ret;
+	}
+
+	/* Store queue config here */
+	priv->num_valid_queues++;
+
+	return 0;
+}
+
+static int
+la12xx_start(struct rte_bbdev *dev)
+{
+	struct bbdev_la12xx_private *priv = dev->data->dev_private;
+	ipc_userspace_t *ipc_priv = priv->ipc_priv;
+	int ready = 0;
+	struct gul_hif *hif_start;
+
+	PMD_INIT_FUNC_TRACE();
+
+	hif_start = (struct gul_hif *)ipc_priv->mhif_start.host_vaddr;
+
+	/* Set Host Read bit */
+	SET_HIF_HOST_RDY(hif_start, HIF_HOST_READY_IPC_APP);
+
+	/* Now wait for modem ready bit */
+	while (!ready)
+		ready = CHK_HIF_MOD_RDY(hif_start, HIF_MOD_READY_IPC_APP);
+
+	return 0;
+}
+
+static const struct rte_bbdev_ops pmd_ops = {
+	.info_get = la12xx_info_get,
+	.queue_setup = la12xx_queue_setup,
+	.queue_release = la12xx_queue_release,
+	.start = la12xx_start
+};
+static struct hugepage_info *
+get_hugepage_info(void)
+{
+	struct hugepage_info *hp_info;
+	struct rte_memseg *mseg;
+
+	PMD_INIT_FUNC_TRACE();
+
+	/* TODO - find a better way */
+	hp_info = rte_malloc(NULL, sizeof(struct hugepage_info), 0);
+	if (!hp_info) {
+		rte_bbdev_log(ERR, "Unable to allocate on local heap");
+		return NULL;
+	}
+
+	mseg = rte_mem_virt2memseg(hp_info, NULL);
+	hp_info->vaddr = mseg->addr;
+	hp_info->paddr = rte_mem_virt2phy(mseg->addr);
+	hp_info->len = mseg->len;
+
+	return hp_info;
+}
+
+static int open_ipc_dev(int modem_id)
+{
+	char dev_initials[16], dev_path[PATH_MAX];
+	struct dirent *entry;
+	int dev_ipc = 0;
+	DIR *dir;
+
+	dir = opendir("/dev/");
+	if (!dir) {
+		rte_bbdev_log(ERR, "Unable to open /dev/");
+		return -1;
+	}
+
+	sprintf(dev_initials, "gulipcgul%d", modem_id);
+
+	while ((entry = readdir(dir)) != NULL) {
+		if (!strncmp(dev_initials, entry->d_name,
+		    sizeof(dev_initials) - 1))
+			break;
+	}
+
+	if (!entry) {
+		rte_bbdev_log(ERR, "Error: No gulipcgul%d device", modem_id);
+		return -1;
+	}
+
+	sprintf(dev_path, "/dev/%s", entry->d_name);
+	dev_ipc = open(dev_path, O_RDWR);
+	if (dev_ipc  < 0) {
+		rte_bbdev_log(ERR, "Error: Cannot open %s", dev_path);
+		return -errno;
+	}
+
+	return dev_ipc;
+}
+
+static int
+setup_la12xx_dev(struct rte_bbdev *dev)
+{
+	struct bbdev_la12xx_private *priv = dev->data->dev_private;
+	ipc_userspace_t *ipc_priv = priv->ipc_priv;
+	struct hugepage_info *hp = NULL;
+	ipc_channel_us_t *ipc_priv_ch = NULL;
+	int dev_ipc = 0, dev_mem = 0, i;
+	ipc_metadata_t *ipc_md;
+	struct gul_hif *mhif;
+	uint32_t phy_align = 0;
+	int ret;
+
+	PMD_INIT_FUNC_TRACE();
+
+	if (!ipc_priv) {
+		/* TODO - get a better way */
+		/* Get the hugepage info against it */
+		hp = get_hugepage_info();
+		if (!hp) {
+			rte_bbdev_log(ERR, "Unable to get hugepage info");
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		rte_bbdev_log_debug("%lx %p %lx",
+				hp->paddr, hp->vaddr, hp->len);
+
+		ipc_priv = rte_zmalloc(0, sizeof(ipc_userspace_t), 0);
+		if (ipc_priv == NULL) {
+			rte_bbdev_log(ERR,
+				"Unable to allocate memory for ipc priv");
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		for (i = 0; i < IPC_MAX_CHANNEL_COUNT; i++) {
+			ipc_priv_ch = rte_zmalloc(0,
+				sizeof(ipc_channel_us_t), 0);
+			if (ipc_priv_ch == NULL) {
+				rte_bbdev_log(ERR,
+					"Unable to allocate memory for channels");
+				ret = -ENOMEM;
+			}
+			ipc_priv->channels[i] = ipc_priv_ch;
+		}
+
+		dev_mem = open("/dev/mem", O_RDWR);
+		if (dev_mem < 0) {
+			rte_bbdev_log(ERR, "Error: Cannot open /dev/mem");
+			ret = -errno;
+			goto err;
+		}
+
+		ipc_priv->instance_id = 0;
+		ipc_priv->dev_mem = dev_mem;
+
+		rte_bbdev_log_debug("hugepg input %lx %p %lx",
+			hp->paddr, hp->vaddr, hp->len);
+
+		ipc_priv->sys_map.hugepg_start.host_phys = hp->paddr;
+		ipc_priv->sys_map.hugepg_start.size = hp->len;
+
+		ipc_priv->hugepg_start.host_phys = hp->paddr;
+		ipc_priv->hugepg_start.host_vaddr = hp->vaddr;
+		ipc_priv->hugepg_start.size = hp->len;
+
+		rte_free(hp);
+	}
+
+	dev_ipc = open_ipc_dev(priv->modem_id);
+	if (dev_ipc < 0) {
+		rte_bbdev_log(ERR, "Error: open_ipc_dev failed");
+		goto err;
+	}
+	ipc_priv->dev_ipc = dev_ipc;
+
+	ret = ioctl(ipc_priv->dev_ipc, IOCTL_GUL_IPC_GET_SYS_MAP,
+		    &ipc_priv->sys_map);
+	if (ret) {
+		rte_bbdev_log(ERR,
+			"IOCTL_GUL_IPC_GET_SYS_MAP ioctl failed");
+		goto err;
+	}
+
+	phy_align = (ipc_priv->sys_map.mhif_start.host_phys % 0x1000);
+	ipc_priv->mhif_start.host_vaddr =
+		mmap(0, ipc_priv->sys_map.mhif_start.size + phy_align,
+		     (PROT_READ | PROT_WRITE), MAP_SHARED, ipc_priv->dev_mem,
+		     (ipc_priv->sys_map.mhif_start.host_phys - phy_align));
+	if (ipc_priv->mhif_start.host_vaddr == MAP_FAILED) {
+		rte_bbdev_log(ERR, "MAP failed:");
+		ret = -errno;
+		goto err;
+	}
+
+	ipc_priv->mhif_start.host_vaddr = (void *) ((uint64_t)
+		(ipc_priv->mhif_start.host_vaddr) + phy_align);
+
+	phy_align = (ipc_priv->sys_map.peb_start.host_phys % 0x1000);
+	ipc_priv->peb_start.host_vaddr =
+		mmap(0, ipc_priv->sys_map.peb_start.size + phy_align,
+		     (PROT_READ | PROT_WRITE), MAP_SHARED, ipc_priv->dev_mem,
+		     (ipc_priv->sys_map.peb_start.host_phys - phy_align));
+	if (ipc_priv->peb_start.host_vaddr == MAP_FAILED) {
+		rte_bbdev_log(ERR, "MAP failed:");
+		ret = -errno;
+		goto err;
+	}
+
+	ipc_priv->peb_start.host_vaddr = (void *)((uint64_t)
+		(ipc_priv->peb_start.host_vaddr) + phy_align);
+
+	phy_align = (ipc_priv->sys_map.modem_ccsrbar.host_phys % 0x1000);
+	ipc_priv->modem_ccsrbar.host_vaddr =
+		mmap(0, ipc_priv->sys_map.modem_ccsrbar.size + phy_align,
+		     (PROT_READ | PROT_WRITE), MAP_SHARED, ipc_priv->dev_mem,
+		     (ipc_priv->sys_map.modem_ccsrbar.host_phys - phy_align));
+	if (ipc_priv->modem_ccsrbar.host_vaddr == MAP_FAILED) {
+		rte_bbdev_log(ERR, "MAP failed:");
+		ret = -errno;
+		goto err;
+	}
+
+	ipc_priv->modem_ccsrbar.host_vaddr = (void *)((uint64_t)
+		(ipc_priv->modem_ccsrbar.host_vaddr) + phy_align);
+
+	ipc_priv->hugepg_start.modem_phys =
+		ipc_priv->sys_map.hugepg_start.modem_phys;
+
+	ipc_priv->mhif_start.host_phys =
+		ipc_priv->sys_map.mhif_start.host_phys;
+	ipc_priv->mhif_start.size = ipc_priv->sys_map.mhif_start.size;
+	ipc_priv->peb_start.host_phys = ipc_priv->sys_map.peb_start.host_phys;
+	ipc_priv->peb_start.size = ipc_priv->sys_map.peb_start.size;
+
+	rte_bbdev_log(INFO, "peb %lx %p %x",
+			ipc_priv->peb_start.host_phys,
+			ipc_priv->peb_start.host_vaddr,
+			ipc_priv->peb_start.size);
+	rte_bbdev_log(INFO, "hugepg %lx %p %x",
+			ipc_priv->hugepg_start.host_phys,
+			ipc_priv->hugepg_start.host_vaddr,
+			ipc_priv->hugepg_start.size);
+	rte_bbdev_log(INFO, "mhif %lx %p %x",
+			ipc_priv->mhif_start.host_phys,
+			ipc_priv->mhif_start.host_vaddr,
+			ipc_priv->mhif_start.size);
+	mhif = (struct gul_hif *)ipc_priv->mhif_start.host_vaddr;
+
+	/* offset is from start of PEB */
+	ipc_md = (ipc_metadata_t *)((uint64_t)ipc_priv->peb_start.host_vaddr +
+			mhif->ipc_regs.ipc_mdata_offset);
+
+	if (sizeof(ipc_metadata_t) != mhif->ipc_regs.ipc_mdata_size) {
+		rte_bbdev_log(ERR,
+			"ipc_metadata_t =%lx, mhif->ipc_regs.ipc_mdata_size=%x",
+			sizeof(ipc_metadata_t), mhif->ipc_regs.ipc_mdata_size);
+		rte_bbdev_log(ERR, "--> mhif->ipc_regs.ipc_mdata_offset= %x",
+			mhif->ipc_regs.ipc_mdata_offset);
+		rte_bbdev_log(ERR, "gul_hif size=%lx", sizeof(struct gul_hif));
+		return IPC_MD_SZ_MISS_MATCH;
+	}
+
+	ipc_priv->instance = (ipc_instance_t *)
+		(&ipc_md->instance_list[ipc_priv->instance_id]);
+
+	rte_bbdev_log_debug("finish host init");
+
+	priv->ipc_priv = ipc_priv;
+
+	return 0;
+
+err:
+	rte_free(hp);
+	rte_free(ipc_priv);
+	rte_free(ipc_priv_ch);
+	if (dev_mem)
+		close(dev_mem);
+	if (dev_ipc)
+		close(dev_ipc);
+
+	return ret;
+}
+
 static inline int
 parse_u16_arg(const char *key, const char *value, void *extra_args)
 {
@@ -123,6 +666,7 @@  la12xx_bbdev_create(struct rte_vdev_device *vdev,
 	struct rte_bbdev *bbdev;
 	const char *name = rte_vdev_device_name(vdev);
 	struct bbdev_la12xx_private *priv;
+	int ret;
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -152,7 +696,13 @@  la12xx_bbdev_create(struct rte_vdev_device *vdev,
 
 	rte_bbdev_log(INFO, "Setting Up %s: DevId=%d, ModemId=%d",
 				name, bbdev->data->dev_id, priv->modem_id);
-	bbdev->dev_ops = NULL;
+	ret = setup_la12xx_dev(bbdev);
+	if (ret) {
+		rte_bbdev_log(ERR, "IPC Setup failed for %s", name);
+		rte_free(bbdev->data->dev_private);
+		return ret;
+	}
+	bbdev->dev_ops = &pmd_ops;
 	bbdev->device = &vdev->device;
 	bbdev->data->socket_id = 0;
 	bbdev->intr_handle = NULL;
diff --git a/drivers/baseband/la12xx/bbdev_la12xx.h b/drivers/baseband/la12xx/bbdev_la12xx.h
index 5228502331..49c37fe2fe 100644
--- a/drivers/baseband/la12xx/bbdev_la12xx.h
+++ b/drivers/baseband/la12xx/bbdev_la12xx.h
@@ -5,16 +5,10 @@ 
 #ifndef __BBDEV_LA12XX_H__
 #define __BBDEV_LA12XX_H__
 
-#define BBDEV_IPC_ENC_OP_TYPE	1
-#define BBDEV_IPC_DEC_OP_TYPE	2
-
-#define MAX_LDPC_ENC_FECA_QUEUES	4
-#define MAX_LDPC_DEC_FECA_QUEUES	4
-
 #define MAX_CHANNEL_DEPTH 16
 /* private data structure */
 struct bbdev_la12xx_private {
-	void *ipc_priv;
+	ipc_userspace_t *ipc_priv;
 	uint8_t num_valid_queues;
 	uint8_t max_nb_queues;
 	uint8_t num_ldpc_enc_queues;
@@ -52,5 +46,6 @@  struct bbdev_la12xx_q_priv {
 
 #define lower_32_bits(x) ((uint32_t)((uint64_t)x))
 #define upper_32_bits(x) ((uint32_t)(((uint64_t)(x) >> 16) >> 16))
-
+#define join_32_bits(upper, lower) \
+	((size_t)(((uint64_t)(upper) << 32) | (uint32_t)(lower)))
 #endif
diff --git a/drivers/baseband/la12xx/bbdev_la12xx_ipc.h b/drivers/baseband/la12xx/bbdev_la12xx_ipc.h
index 9aa5562981..5f613fb087 100644
--- a/drivers/baseband/la12xx/bbdev_la12xx_ipc.h
+++ b/drivers/baseband/la12xx/bbdev_la12xx_ipc.h
@@ -4,9 +4,182 @@ 
 #ifndef __BBDEV_LA12XX_IPC_H__
 #define __BBDEV_LA12XX_IPC_H__
 
+#define LA12XX_MAX_QUEUES 20
+#define HOST_RX_QUEUEID_OFFSET LA12XX_MAX_QUEUES
+
+/** No. of max channel per instance */
+#define IPC_MAX_CHANNEL_COUNT	(64)
+
 /** No. of max channel per instance */
 #define IPC_MAX_DEPTH	(16)
 
+/** No. of max IPC instance per modem */
+#define IPC_MAX_INSTANCE_COUNT	(1)
+
+/** Error codes */
+#define IPC_SUCCESS		(0) /** IPC operation success */
+#define IPC_INPUT_INVALID	(-1) /** Invalid input to API */
+#define IPC_CH_INVALID		(-2) /** Channel no is invalid */
+#define IPC_INSTANCE_INVALID	(-3) /** Instance no is invalid */
+#define IPC_MEM_INVALID		(-4) /** Insufficient memory */
+#define IPC_CH_FULL		(-5) /** Channel is full */
+#define IPC_CH_EMPTY		(-6) /** Channel is empty */
+#define IPC_BL_EMPTY		(-7) /** Free buffer list is empty */
+#define IPC_BL_FULL		(-8) /** Free buffer list is full */
+#define IPC_HOST_BUF_ALLOC_FAIL	(-9) /** DPDK malloc fail */
+#define IPC_MD_SZ_MISS_MATCH	(-10) /** META DATA size in mhif miss matched*/
+#define IPC_MALLOC_FAIL		(-11) /** system malloc fail */
+#define IPC_IOCTL_FAIL		(-12) /** IOCTL call failed */
+#define IPC_MMAP_FAIL		(-14) /** MMAP fail */
+#define IPC_OPEN_FAIL		(-15) /** OPEN fail */
+#define IPC_EVENTFD_FAIL	(-16) /** eventfd initialization failed */
+#define IPC_NOT_IMPLEMENTED	(-17) /** IPC feature is not implemented yet*/
+
+#define SET_HIF_HOST_RDY(hif, RDY_MASK) (hif->host_ready |= RDY_MASK)
+#define CHK_HIF_MOD_RDY(hif, RDY_MASK) (hif->mod_ready & RDY_MASK)
+
+/* Host Ready bits */
+#define HIF_HOST_READY_HOST_REGIONS	(1 << 0)
+#define HIF_HOST_READY_IPC_LIB		(1 << 12)
+#define HIF_HOST_READY_IPC_APP		(1 << 13)
+#define HIF_HOST_READY_FECA		(1 << 14)
+
+/* Modem Ready bits */
+#define HIF_MOD_READY_IPC_LIB		(1 << 5)
+#define HIF_MOD_READY_IPC_APP		(1 << 6)
+#define HIF_MOD_READY_FECA		(1 << 7)
+
+typedef void *ipc_t;
+
+struct ipc_msg {
+	int chid;
+	void *addr;
+	uint32_t len;
+	uint8_t flags;
+};
+
+typedef struct {
+	uint64_t host_phys;
+	uint32_t modem_phys;
+	void    *host_vaddr;
+	uint32_t size;
+} mem_range_t;
+
+#define GUL_IPC_MAGIC	'R'
+
+#define IOCTL_GUL_IPC_GET_SYS_MAP _IOW(GUL_IPC_MAGIC, 1, struct ipc_msg *)
+#define IOCTL_GUL_IPC_CHANNEL_REGISTER _IOWR(GUL_IPC_MAGIC, 4, struct ipc_msg *)
+#define IOCTL_GUL_IPC_CHANNEL_DEREGISTER \
+	_IOWR(GUL_IPC_MAGIC, 5, struct ipc_msg *)
+#define IOCTL_GUL_IPC_CHANNEL_RAISE_INTERRUPT _IOW(GUL_IPC_MAGIC, 6, int *)
+
+/** buffer ring common metadata */
+typedef struct ipc_bd_ring_md {
+	volatile uint32_t pi;		/**< Producer index and flag (MSB)
+					  *  which flip for each Ring wrapping
+					  */
+	volatile uint32_t ci;		/**< Consumer index and flag (MSB)
+					  *  which flip for each Ring wrapping
+					  */
+	uint32_t ring_size;	/**< depth (Used to roll-over pi/ci) */
+	uint32_t msg_size;	/**< Size of the each buffer */
+} __rte_packed ipc_br_md_t;
+
+/** IPC buffer descriptor */
+typedef struct ipc_buffer_desc {
+	union {
+		uint64_t host_virt;	/**< msg's host virtual address */
+		struct {
+			uint32_t host_virt_l;
+			uint32_t host_virt_h;
+		};
+	};
+	uint32_t modem_ptr;	/**< msg's modem physical address */
+	uint32_t len;		/**< msg len */
+} __rte_packed ipc_bd_t;
+
+typedef struct ipc_channel {
+	uint32_t ch_id;		/**< Channel id */
+	ipc_br_md_t md;			/**< Metadata for BD ring */
+	ipc_bd_t bd_h[IPC_MAX_DEPTH];	/**< Buffer Descriptor on Host */
+	ipc_bd_t bd_m[IPC_MAX_DEPTH];	/**< Buffer Descriptor on Modem */
+	uint32_t op_type;		/**< Type of the BBDEV operation
+					  * supported on this channel
+					  */
+	uint32_t depth;			/**< Channel depth */
+	uint32_t feca_blk_id;	/**< FECA Transport Block ID for processing */
+	uint32_t la12xx_core_id;/**< LA12xx core ID on which this will be
+				  * scheduled
+				  */
+	uint32_t feca_input_circ_size;	/**< FECA transport block input
+					  * circular buffer size
+					  */
+	uint32_t host_ipc_params;	/**< Address for host IPC parameters */
+} __rte_packed ipc_ch_t;
+
+typedef struct ipc_instance {
+	uint32_t instance_id;		/**< instance id, use to init this
+					  * instance by ipc_init API
+					  */
+	uint32_t initialized;		/**< Set in ipc_init */
+	ipc_ch_t ch_list[IPC_MAX_CHANNEL_COUNT];
+		/**< Channel descriptors in this instance */
+} __rte_packed ipc_instance_t;
+
+typedef struct ipc_metadata {
+	uint32_t ipc_host_signature; /**< IPC host signature, Set by host/L2 */
+	uint32_t ipc_geul_signature; /**< IPC geul signature, Set by modem */
+	ipc_instance_t instance_list[IPC_MAX_INSTANCE_COUNT];
+} __rte_packed ipc_metadata_t;
+
+typedef struct ipc_channel_us_priv {
+	int32_t		eventfd;
+	uint32_t	channel_id;
+	/* In flight packets status for buffer list. */
+	uint8_t		bufs_inflight[IPC_MAX_DEPTH];
+} ipc_channel_us_t;
+
+typedef struct {
+	uint64_t host_phys;
+	uint32_t modem_phys;
+	uint32_t size;
+} mem_strt_addr_t;
+
+typedef struct {
+	mem_strt_addr_t modem_ccsrbar;
+	mem_strt_addr_t peb_start; /* PEB meta data */
+	mem_strt_addr_t mhif_start; /* MHIF meta daat */
+	mem_strt_addr_t hugepg_start; /* Modem to access hugepage */
+} sys_map_t;
+
+typedef struct ipc_priv_t {
+	int instance_id;
+	int dev_ipc;
+	int dev_mem;
+	sys_map_t sys_map;
+	mem_range_t modem_ccsrbar;
+	mem_range_t peb_start;
+	mem_range_t mhif_start;
+	mem_range_t hugepg_start;
+	ipc_channel_us_t *channels[IPC_MAX_CHANNEL_COUNT];
+	ipc_instance_t	*instance;
+	ipc_instance_t	*instance_bk;
+} ipc_userspace_t;
+
+/** Structure specifying enqueue operation (enqueue at LA1224) */
+struct bbdev_ipc_enqueue_op {
+	/** Status of operation that was performed */
+	int32_t status;
+	/** CRC Status of SD operation that was performed */
+	int32_t crc_stat_addr;
+	/** HARQ Output buffer memory length for Shared Decode.
+	 * Filled by LA12xx.
+	 */
+	uint32_t out_len;
+	/** Reserved (for 8 byte alignment) */
+	uint32_t rsvd;
+};
+
 /* This shared memory would be on the host side which have copy of some
  * of the parameters which are also part of Shared BD ring. Read access
  * of these parameters from the host side would not be over PCI.
@@ -14,7 +187,21 @@ 
 typedef struct host_ipc_params {
 	volatile uint32_t pi;
 	volatile uint32_t ci;
-	volatile uint32_t modem_ptr[IPC_MAX_DEPTH];
+	volatile uint32_t bd_m_modem_ptr[IPC_MAX_DEPTH];
 } __rte_packed host_ipc_params_t;
 
+struct hif_ipc_regs {
+	uint32_t ipc_mdata_offset;
+	uint32_t ipc_mdata_size;
+} __rte_packed;
+
+struct gul_hif {
+	uint32_t ver;
+	uint32_t hif_ver;
+	uint32_t status;
+	volatile uint32_t host_ready;
+	volatile uint32_t mod_ready;
+	struct hif_ipc_regs ipc_regs;
+} __rte_packed;
+
 #endif