Message ID | 20210516183221.93686-1-mark.kettenis@xs4all.nl |
---|---|
Headers | show |
Series | Apple M1 pinctrl DT bindings | expand |
On Sun, May 16, 2021 at 08:32:17PM +0200, Mark Kettenis wrote: > From: Mark Kettenis <kettenis@openbsd.org> > > The Apple GPIO controller is a simple combined pin and GPIO conroller > present on Apple ARM SoC platforms, including various iPhone and iPad > devices and the "Apple Silicon" Macs. > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org> > --- > .../bindings/pinctrl/apple,pinctrl.yaml | 103 ++++++++++++++++++ > MAINTAINERS | 2 + > include/dt-bindings/pinctrl/apple.h | 13 +++ > 3 files changed, 118 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > create mode 100644 include/dt-bindings/pinctrl/apple.h > > diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > new file mode 100644 > index 000000000000..fae23e1d845e > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > @@ -0,0 +1,103 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Apple GPIO controller > + > +maintainers: > + - Mark Kettenis <kettenis@openbsd.org> > + > +description: | > + The Apple GPIO controller is a simple combined pin and GPIO > + controller present on Apple ARM SoC platforms, including various > + iPhone and iPad devices and the "Apple Silicon" Macs. > + > +properties: > + compatible: > + items: > + - const: apple,t8103-pinctrl > + - const: apple,pinctrl > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + gpio-controller: true > + > + '#gpio-cells': > + const: 2 > + > + gpio-ranges: > + maxItems: 1 > + > + interrupts: > + minItems: 1 > + maxItems: 7 Add some description about what each interrupt is. Is this really 1-7 or either 1 or 7? > + > + interrupt-controller: true > + > +patternProperties: > + '-pins$': > + type: object > + $ref: pinmux-node.yaml# > + > + properties: > + pinmux: > + description: > + Values are constructed from pin number and alternate function > + configuration number using the APPLE_PINMUX() helper macro > + defined in include/dt-bindings/pinctrl/apple.h. > + > + required: > + - pinmux > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - gpio-controller > + - '#gpio-cells' > + - gpio-ranges > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/apple-aic.h> > + #include <dt-bindings/pinctrl/apple.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + pinctrl: pinctrl@23c100000 { > + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; > + reg = <0x2 0x3c100000 0x0 0x100000>; > + clocks = <&gpio_clk>; > + > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pinctrl 0 0 212>; > + > + interrupt-controller; > + interrupt-parent = <&aic>; > + interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>, > + <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>, > + <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>, > + <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>, > + <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>, > + <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>, > + <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>; > + > + pcie_pins: pcie-pins { > + pinmux = <APPLE_PINMUX(150, 1)>, > + <APPLE_PINMUX(151, 1)>, > + <APPLE_PINMUX(32, 1)>; > + }; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index ad0e9be66885..7327c9b778f1 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -1654,9 +1654,11 @@ C: irc://chat.freenode.net/asahi-dev > T: git https://github.com/AsahiLinux/linux.git > F: Documentation/devicetree/bindings/arm/apple.yaml > F: Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml > +F: Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > F: arch/arm64/boot/dts/apple/ > F: drivers/irqchip/irq-apple-aic.c > F: include/dt-bindings/interrupt-controller/apple-aic.h > +F: include/dt-bindings/pinctrl/apple.h > > ARM/ARTPEC MACHINE SUPPORT > M: Jesper Nilsson <jesper.nilsson@axis.com> > diff --git a/include/dt-bindings/pinctrl/apple.h b/include/dt-bindings/pinctrl/apple.h > new file mode 100644 > index 000000000000..ea0a6f466592 > --- /dev/null > +++ b/include/dt-bindings/pinctrl/apple.h > @@ -0,0 +1,13 @@ > +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */ > +/* > + * This header provides constants for Apple pinctrl bindings. > + */ > + > +#ifndef _DT_BINDINGS_PINCTRL_APPLE_H > +#define _DT_BINDINGS_PINCTRL_APPLE_H > + > +#define APPLE_PINMUX(pin, func) ((pin) | ((func) << 16)) > +#define APPLE_PIN(pinmux) ((pinmux) & 0xffff) > +#define APPLE_FUNC(pinmux) ((pinmux) >> 16) > + > +#endif /* _DT_BINDINGS_PINCTRL_APPLE_H */ > -- > 2.31.1 >
> Date: Tue, 18 May 2021 08:43:56 -0500 > From: Rob Herring <robh@kernel.org> > > On Sun, May 16, 2021 at 08:32:17PM +0200, Mark Kettenis wrote: > > From: Mark Kettenis <kettenis@openbsd.org> > > > > The Apple GPIO controller is a simple combined pin and GPIO conroller > > present on Apple ARM SoC platforms, including various iPhone and iPad > > devices and the "Apple Silicon" Macs. > > > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org> > > --- > > .../bindings/pinctrl/apple,pinctrl.yaml | 103 ++++++++++++++++++ > > MAINTAINERS | 2 + > > include/dt-bindings/pinctrl/apple.h | 13 +++ > > 3 files changed, 118 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > > create mode 100644 include/dt-bindings/pinctrl/apple.h > > > > diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > > new file mode 100644 > > index 000000000000..fae23e1d845e > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > > @@ -0,0 +1,103 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Apple GPIO controller > > + > > +maintainers: > > + - Mark Kettenis <kettenis@openbsd.org> > > + > > +description: | > > + The Apple GPIO controller is a simple combined pin and GPIO > > + controller present on Apple ARM SoC platforms, including various > > + iPhone and iPad devices and the "Apple Silicon" Macs. > > + > > +properties: > > + compatible: > > + items: > > + - const: apple,t8103-pinctrl > > + - const: apple,pinctrl > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 1 > > + > > + gpio-controller: true > > + > > + '#gpio-cells': > > + const: 2 > > + > > + gpio-ranges: > > + maxItems: 1 > > + > > + interrupts: > > + minItems: 1 > > + maxItems: 7 > > Add some description about what each interrupt is. Will do. This aspect of the hardware is somewhat interesting. Pins can be assigned to one of (up to 7) interrupt groups, each with their own interrupt. > Is this really 1-7 or either 1 or 7? The intention is 1-7, to cater for the case where less than 7 interrupt groups are supported by a particular instance of this hardware block. For the M1, it seems there always are 7 interrupt groups, but I found a device tree for the iBridge2,1 where one of the instances only supports 3 interrupt groups and therefore only provides three interrupts. > > + > > + interrupt-controller: true > > + > > +patternProperties: > > + '-pins$': > > + type: object > > + $ref: pinmux-node.yaml# > > + > > + properties: > > + pinmux: > > + description: > > + Values are constructed from pin number and alternate function > > + configuration number using the APPLE_PINMUX() helper macro > > + defined in include/dt-bindings/pinctrl/apple.h. > > + > > + required: > > + - pinmux > > + > > + additionalProperties: false > > + > > +required: > > + - compatible > > + - reg > > + - gpio-controller > > + - '#gpio-cells' > > + - gpio-ranges > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/apple-aic.h> > > + #include <dt-bindings/pinctrl/apple.h> > > + > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + pinctrl: pinctrl@23c100000 { > > + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; > > + reg = <0x2 0x3c100000 0x0 0x100000>; > > + clocks = <&gpio_clk>; > > + > > + gpio-controller; > > + #gpio-cells = <2>; > > + gpio-ranges = <&pinctrl 0 0 212>; > > + > > + interrupt-controller; > > + interrupt-parent = <&aic>; > > + interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>, > > + <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>, > > + <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>, > > + <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>, > > + <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>, > > + <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>, > > + <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>; > > + > > + pcie_pins: pcie-pins { > > + pinmux = <APPLE_PINMUX(150, 1)>, > > + <APPLE_PINMUX(151, 1)>, > > + <APPLE_PINMUX(32, 1)>; > > + }; > > + }; > > + }; > > diff --git a/MAINTAINERS b/MAINTAINERS > > index ad0e9be66885..7327c9b778f1 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -1654,9 +1654,11 @@ C: irc://chat.freenode.net/asahi-dev > > T: git https://github.com/AsahiLinux/linux.git > > F: Documentation/devicetree/bindings/arm/apple.yaml > > F: Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml > > +F: Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > > F: arch/arm64/boot/dts/apple/ > > F: drivers/irqchip/irq-apple-aic.c > > F: include/dt-bindings/interrupt-controller/apple-aic.h > > +F: include/dt-bindings/pinctrl/apple.h > > > > ARM/ARTPEC MACHINE SUPPORT > > M: Jesper Nilsson <jesper.nilsson@axis.com> > > diff --git a/include/dt-bindings/pinctrl/apple.h b/include/dt-bindings/pinctrl/apple.h > > new file mode 100644 > > index 000000000000..ea0a6f466592 > > --- /dev/null > > +++ b/include/dt-bindings/pinctrl/apple.h > > @@ -0,0 +1,13 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */ > > +/* > > + * This header provides constants for Apple pinctrl bindings. > > + */ > > + > > +#ifndef _DT_BINDINGS_PINCTRL_APPLE_H > > +#define _DT_BINDINGS_PINCTRL_APPLE_H > > + > > +#define APPLE_PINMUX(pin, func) ((pin) | ((func) << 16)) > > +#define APPLE_PIN(pinmux) ((pinmux) & 0xffff) > > +#define APPLE_FUNC(pinmux) ((pinmux) >> 16) > > + > > +#endif /* _DT_BINDINGS_PINCTRL_APPLE_H */ > > -- > > 2.31.1 > > >
From: Mark Kettenis <kettenis@openbsd.org> This small series adds bindings for the pin and GPIO controller found on the Apple M1 SoC. At this point, the primary consumer for these bindings is U-Boot. With the help of these bindings U-Boot can bring up the PCIe root complex into a state where the OS use it without having to deal with the GPIO pins. A Linux driver may be implemented later to support power management and/or other devices that need GPIO control. Since the binding is based on standard pinmux node bindings this should be relatively easy. Changelog: v2: - Fix typo in DT schema Mark Kettenis (2): dt-bindings: pinctrl: Add DT bindings for apple,pinctrl arm64: apple: Add pinctrl nodes .../bindings/pinctrl/apple,pinctrl.yaml | 103 ++++++++++++++++++ MAINTAINERS | 2 + arch/arm64/boot/dts/apple/t8103.dtsi | 83 ++++++++++++++ include/dt-bindings/pinctrl/apple.h | 13 +++ 4 files changed, 201 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml create mode 100644 include/dt-bindings/pinctrl/apple.h