Message ID | 20210528081336.3858700-3-martin.kepplinger@puri.sm |
---|---|
State | Superseded |
Headers | show |
Series | Add support for the Hynix Hi-846 camera | expand |
On Fri, May 28, 2021 at 11:35:35AM +0300, Laurent Pinchart wrote: ... > > + maxItems: 1 > > + > > + clocks: > > + description: Reference to the mclk clock. > > + maxItems: 1 > > You could also write this > > clocks: > items: > - description: Reference to the mclk clock. > > The maxItems will then be implicit. This is the preferred form when > multiple clocks are used, and given that clocks it meant to contain a > list of clocks, even if it has a single entry, placing the description > in a list of items may be a bit better semantically speaking. > > > + > > + clock-names: > > + const: mclk > > Similarly, > > clock-names: > items: > - const: mclk > > Rob, is standardizing this pattern a good idea, or do you prefer the > shorter form > > clock-names: > const: mclk As there's just one clock, isn't the clock-names redundant?
On Wed, Jun 02, 2021 at 04:51:37PM +0300, Sakari Ailus wrote: > Hi Martin, > > On Fri, May 28, 2021 at 10:13:33AM +0200, Martin Kepplinger wrote: > > Document the bindings used for the SK Hynix Hi-846 CMOS camera driver. > > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> > > Could you read Documentation/driver-api/media/camera-sensor.rst, please? > > I believe you'll need assigned-clock-rates device property as well as I dn't think assigned-clock-rates should be part of the bindings, it's a mechanism that can be used in any DT device node. > link-frequencies endpoint property. > > > --- > > .../bindings/media/i2c/hynix,hi846.yaml | 99 +++++++++++++++++++ > > 1 file changed, 99 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > new file mode 100644 > > index 000000000000..2991108e23e5 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > @@ -0,0 +1,99 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor > > + > > +maintainers: > > + - Martin Kepplinger <martin.kepplinger@puri.sm> > > + > > +description: |- > > + The Hi-846 is a raw image sensor with an MIPI CSI-2 image data > > + interface and CCI (I2C compatible) control bus. The output format > > + is 10bit Bayer. > > Virtually all Bayer sensors can do 8 bpp, too. I'd drop the sentence Not this one according to its datasheet (we can't rule out that this would be possible an undocumented of course). > mentoning 10 bits. > > > + > > +properties: > > + compatible: > > + const: hynix,hi846 > > + > > + reg: > > + description: I2C device address. > > + maxItems: 1 > > + > > + clocks: > > + description: Reference to the mclk clock. > > + maxItems: 1 > > + > > + clock-names: > > + const: mclk > > + > > + rst-gpios: > > + description: Reference to the GPIO connected to the reset pin. Active low. > > + maxItems: 1 > > + > > + vdd-supply: > > + description: Definition of the regulator used as 1.8V digital power supply. > > + > > + port: > > + $ref: /schemas/graph.yaml#/properties/port > > + additionalProperties: false > > + > > + properties: > > + endpoint: > > + $ref: /schemas/media/video-interfaces.yaml# > > + unevaluatedProperties: false > > + > > + properties: > > + data-lanes: > > + oneOf: > > + - items: > > + - const: 1 > > + - const: 2 > > + - const: 3 > > + - const: 4 > > + - items: > > + - const: 1 > > + - const: 2 > > + > > + required: > > + - data-lanes > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - rst-gpios > > + - vdd-supply > > + - port > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + hi846: camera@20 { > > + compatible = "hynix,hi846"; > > + reg = <0x20>; > > + clocks = <&clk>; > > + clock-names = "mclk"; > > + vdd-supply = <®_camera_pwr_en>; /* 1.8v */ > > + rst-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; > > + > > + port { > > + camera_out: endpoint { > > + remote-endpoint = <&csi1_ep1>; > > + data-lanes = <1 2>; > > + }; > > + }; > > + }; > > + }; > > + > > +... -- Regards, Laurent Pinchart
Am Mittwoch, dem 02.06.2021 um 17:05 +0300 schrieb Laurent Pinchart: > On Wed, Jun 02, 2021 at 04:51:37PM +0300, Sakari Ailus wrote: > > Hi Martin, > > > > On Fri, May 28, 2021 at 10:13:33AM +0200, Martin Kepplinger wrote: > > > Document the bindings used for the SK Hynix Hi-846 CMOS camera > > > driver. > > > > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> > > > > Could you read Documentation/driver-api/media/camera-sensor.rst, > > please? > > > > I believe you'll need assigned-clock-rates device property as well > > as > > I dn't think assigned-clock-rates should be part of the bindings, > it's a > mechanism that can be used in any DT device node. > > > link-frequencies endpoint property. > > > > > --- > > > .../bindings/media/i2c/hynix,hi846.yaml | 99 > > > +++++++++++++++++++ > > > 1 file changed, 99 insertions(+) > > > create mode 100644 > > > Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > > > > diff --git > > > a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > new file mode 100644 > > > index 000000000000..2991108e23e5 > > > --- /dev/null > > > +++ > > > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > @@ -0,0 +1,99 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor > > > + > > > +maintainers: > > > + - Martin Kepplinger <martin.kepplinger@puri.sm> > > > + > > > +description: |- > > > + The Hi-846 is a raw image sensor with an MIPI CSI-2 image data > > > + interface and CCI (I2C compatible) control bus. The output > > > format > > > + is 10bit Bayer. > > > > Virtually all Bayer sensors can do 8 bpp, too. I'd drop the > > sentence > > Not this one according to its datasheet (we can't rule out that this > would be possible an undocumented of course). actually there is one register that mentions raw8 output but I never got that to work. I don't have to mention 10bit in this description. thanks. > > > mentoning 10 bits. > > > > > + > > > +properties: > > > + compatible: > > > + const: hynix,hi846 > > > + > > > + reg: > > > + description: I2C device address. > > > + maxItems: 1 > > > + > > > + clocks: > > > + description: Reference to the mclk clock. > > > + maxItems: 1 > > > + > > > + clock-names: > > > + const: mclk > > > + > > > + rst-gpios: > > > + description: Reference to the GPIO connected to the reset > > > pin. Active low. > > > + maxItems: 1 > > > + > > > + vdd-supply: > > > + description: Definition of the regulator used as 1.8V > > > digital power supply. > > > + > > > + port: > > > + $ref: /schemas/graph.yaml#/properties/port > > > + additionalProperties: false > > > + > > > + properties: > > > + endpoint: > > > + $ref: /schemas/media/video-interfaces.yaml# > > > + unevaluatedProperties: false > > > + > > > + properties: > > > + data-lanes: > > > + oneOf: > > > + - items: > > > + - const: 1 > > > + - const: 2 > > > + - const: 3 > > > + - const: 4 > > > + - items: > > > + - const: 1 > > > + - const: 2 > > > + > > > + required: > > > + - data-lanes > > > + > > > +required: > > > + - compatible > > > + - reg > > > + - clocks > > > + - clock-names > > > + - rst-gpios > > > + - vdd-supply > > > + - port > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/gpio/gpio.h> > > > + > > > + i2c { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + hi846: camera@20 { > > > + compatible = "hynix,hi846"; > > > + reg = <0x20>; > > > + clocks = <&clk>; > > > + clock-names = "mclk"; > > > + vdd-supply = <®_camera_pwr_en>; /* 1.8v */ > > > + rst-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; > > > + > > > + port { > > > + camera_out: endpoint { > > > + remote-endpoint = <&csi1_ep1>; > > > + data-lanes = <1 2>; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > +... >
Hi Laurent, On Wed, Jun 02, 2021 at 05:05:14PM +0300, Laurent Pinchart wrote: > On Wed, Jun 02, 2021 at 04:51:37PM +0300, Sakari Ailus wrote: > > Hi Martin, > > > > On Fri, May 28, 2021 at 10:13:33AM +0200, Martin Kepplinger wrote: > > > Document the bindings used for the SK Hynix Hi-846 CMOS camera driver. > > > > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> > > > > Could you read Documentation/driver-api/media/camera-sensor.rst, please? > > > > I believe you'll need assigned-clock-rates device property as well as > > I dn't think assigned-clock-rates should be part of the bindings, it's a > mechanism that can be used in any DT device node. What if it's required? > > > link-frequencies endpoint property. > > > > > --- > > > .../bindings/media/i2c/hynix,hi846.yaml | 99 +++++++++++++++++++ > > > 1 file changed, 99 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > new file mode 100644 > > > index 000000000000..2991108e23e5 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > @@ -0,0 +1,99 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor > > > + > > > +maintainers: > > > + - Martin Kepplinger <martin.kepplinger@puri.sm> > > > + > > > +description: |- > > > + The Hi-846 is a raw image sensor with an MIPI CSI-2 image data > > > + interface and CCI (I2C compatible) control bus. The output format > > > + is 10bit Bayer. > > > > Virtually all Bayer sensors can do 8 bpp, too. I'd drop the sentence > > Not this one according to its datasheet (we can't rule out that this > would be possible an undocumented of course). Ok, fair enough. > > > mentoning 10 bits. > > > > > + > > > +properties: > > > + compatible: > > > + const: hynix,hi846 > > > + > > > + reg: > > > + description: I2C device address. > > > + maxItems: 1 > > > + > > > + clocks: > > > + description: Reference to the mclk clock. > > > + maxItems: 1 > > > + > > > + clock-names: > > > + const: mclk > > > + > > > + rst-gpios: > > > + description: Reference to the GPIO connected to the reset pin. Active low. > > > + maxItems: 1 > > > + > > > + vdd-supply: > > > + description: Definition of the regulator used as 1.8V digital power supply. > > > + > > > + port: > > > + $ref: /schemas/graph.yaml#/properties/port > > > + additionalProperties: false > > > + > > > + properties: > > > + endpoint: > > > + $ref: /schemas/media/video-interfaces.yaml# > > > + unevaluatedProperties: false > > > + > > > + properties: > > > + data-lanes: > > > + oneOf: > > > + - items: > > > + - const: 1 > > > + - const: 2 > > > + - const: 3 > > > + - const: 4 > > > + - items: > > > + - const: 1 > > > + - const: 2 > > > + > > > + required: > > > + - data-lanes > > > + > > > +required: > > > + - compatible > > > + - reg > > > + - clocks > > > + - clock-names > > > + - rst-gpios > > > + - vdd-supply > > > + - port > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/gpio/gpio.h> > > > + > > > + i2c { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + hi846: camera@20 { > > > + compatible = "hynix,hi846"; > > > + reg = <0x20>; > > > + clocks = <&clk>; > > > + clock-names = "mclk"; > > > + vdd-supply = <®_camera_pwr_en>; /* 1.8v */ > > > + rst-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; > > > + > > > + port { > > > + camera_out: endpoint { > > > + remote-endpoint = <&csi1_ep1>; > > > + data-lanes = <1 2>; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > +... > > -- > Regards, > > Laurent Pinchart -- Sakari Ailus
diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml new file mode 100644 index 000000000000..2991108e23e5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor + +maintainers: + - Martin Kepplinger <martin.kepplinger@puri.sm> + +description: |- + The Hi-846 is a raw image sensor with an MIPI CSI-2 image data + interface and CCI (I2C compatible) control bus. The output format + is 10bit Bayer. + +properties: + compatible: + const: hynix,hi846 + + reg: + description: I2C device address. + maxItems: 1 + + clocks: + description: Reference to the mclk clock. + maxItems: 1 + + clock-names: + const: mclk + + rst-gpios: + description: Reference to the GPIO connected to the reset pin. Active low. + maxItems: 1 + + vdd-supply: + description: Definition of the regulator used as 1.8V digital power supply. + + port: + $ref: /schemas/graph.yaml#/properties/port + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + - items: + - const: 1 + - const: 2 + + required: + - data-lanes + +required: + - compatible + - reg + - clocks + - clock-names + - rst-gpios + - vdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hi846: camera@20 { + compatible = "hynix,hi846"; + reg = <0x20>; + clocks = <&clk>; + clock-names = "mclk"; + vdd-supply = <®_camera_pwr_en>; /* 1.8v */ + rst-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + + port { + camera_out: endpoint { + remote-endpoint = <&csi1_ep1>; + data-lanes = <1 2>; + }; + }; + }; + }; + +...
Document the bindings used for the SK Hynix Hi-846 CMOS camera driver. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> --- .../bindings/media/i2c/hynix,hi846.yaml | 99 +++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml