diff mbox series

[net-next,v9,13/15] net: phylink: introduce phylink_fwnode_phy_connect()

Message ID 20210611105401.270673-14-ciorneiioana@gmail.com
State Superseded
Headers show
Series ACPI support for dpaa2 driver | expand

Commit Message

Ioana Ciornei June 11, 2021, 10:53 a.m. UTC
From: Calvin Johnson <calvin.johnson@oss.nxp.com>

Define phylink_fwnode_phy_connect() to connect phy specified by
a fwnode to a phylink instance.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Grant Likely <grant.likely@arm.com>
---

Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6:
- remove OF check for fixed-link

Changes in v5: None
Changes in v4:
- call phy_device_free() before returning

Changes in v3: None
Changes in v2: None



 drivers/net/phy/phylink.c | 54 +++++++++++++++++++++++++++++++++++++++
 include/linux/phylink.h   |  3 +++
 2 files changed, 57 insertions(+)

Comments

Russell King (Oracle) June 11, 2021, 11:17 a.m. UTC | #1
On Fri, Jun 11, 2021 at 01:53:59PM +0300, Ioana Ciornei wrote:
> From: Calvin Johnson <calvin.johnson@oss.nxp.com>
> 
> Define phylink_fwnode_phy_connect() to connect phy specified by
> a fwnode to a phylink instance.
> 
> Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Acked-by: Grant Likely <grant.likely@arm.com>

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Thanks.

> ---
> 
> Changes in v9: None
> Changes in v8: None
> Changes in v7: None
> Changes in v6:
> - remove OF check for fixed-link
> 
> Changes in v5: None
> Changes in v4:
> - call phy_device_free() before returning
> 
> Changes in v3: None
> Changes in v2: None
> 
> 
> 
>  drivers/net/phy/phylink.c | 54 +++++++++++++++++++++++++++++++++++++++
>  include/linux/phylink.h   |  3 +++
>  2 files changed, 57 insertions(+)
> 
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 96d8e88b4e46..9cc0f69faafe 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -5,6 +5,7 @@
>   *
>   * Copyright (C) 2015 Russell King
>   */
> +#include <linux/acpi.h>
>  #include <linux/ethtool.h>
>  #include <linux/export.h>
>  #include <linux/gpio/consumer.h>
> @@ -1125,6 +1126,59 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
>  }
>  EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
>  
> +/**
> + * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
> + * @pl: a pointer to a &struct phylink returned from phylink_create()
> + * @fwnode: a pointer to a &struct fwnode_handle.
> + * @flags: PHY-specific flags to communicate to the PHY device driver
> + *
> + * Connect the phy specified @fwnode to the phylink instance specified
> + * by @pl.
> + *
> + * Returns 0 on success or a negative errno.
> + */
> +int phylink_fwnode_phy_connect(struct phylink *pl,
> +			       struct fwnode_handle *fwnode,
> +			       u32 flags)
> +{
> +	struct fwnode_handle *phy_fwnode;
> +	struct phy_device *phy_dev;
> +	int ret;
> +
> +	/* Fixed links and 802.3z are handled without needing a PHY */
> +	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
> +	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
> +	     phy_interface_mode_is_8023z(pl->link_interface)))
> +		return 0;
> +
> +	phy_fwnode = fwnode_get_phy_node(fwnode);
> +	if (IS_ERR(phy_fwnode)) {
> +		if (pl->cfg_link_an_mode == MLO_AN_PHY)
> +			return -ENODEV;
> +		return 0;
> +	}
> +
> +	phy_dev = fwnode_phy_find_device(phy_fwnode);
> +	/* We're done with the phy_node handle */
> +	fwnode_handle_put(phy_fwnode);
> +	if (!phy_dev)
> +		return -ENODEV;
> +
> +	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
> +				pl->link_interface);
> +	if (ret) {
> +		phy_device_free(phy_dev);
> +		return ret;
> +	}
> +
> +	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
> +	if (ret)
> +		phy_detach(phy_dev);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
> +
>  /**
>   * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
>   *   instance.
> diff --git a/include/linux/phylink.h b/include/linux/phylink.h
> index fd2acfd9b597..afb3ded0b691 100644
> --- a/include/linux/phylink.h
> +++ b/include/linux/phylink.h
> @@ -441,6 +441,9 @@ void phylink_destroy(struct phylink *);
>  
>  int phylink_connect_phy(struct phylink *, struct phy_device *);
>  int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
> +int phylink_fwnode_phy_connect(struct phylink *pl,
> +			       struct fwnode_handle *fwnode,
> +			       u32 flags);
>  void phylink_disconnect_phy(struct phylink *);
>  
>  void phylink_mac_change(struct phylink *, bool up);
> -- 
> 2.31.1
> 
>
andy@surfacebook.localdomain June 15, 2021, 8:18 p.m. UTC | #2
Fri, Jun 11, 2021 at 01:53:59PM +0300, Ioana Ciornei kirjoitti:
> From: Calvin Johnson <calvin.johnson@oss.nxp.com>

> 

> Define phylink_fwnode_phy_connect() to connect phy specified by

> a fwnode to a phylink instance.


...

> +/**

> + * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.

> + * @pl: a pointer to a &struct phylink returned from phylink_create()

> + * @fwnode: a pointer to a &struct fwnode_handle.

> + * @flags: PHY-specific flags to communicate to the PHY device driver

> + *

> + * Connect the phy specified @fwnode to the phylink instance specified

> + * by @pl.

> + *

> + * Returns 0 on success or a negative errno.

> + */

> +int phylink_fwnode_phy_connect(struct phylink *pl,

> +			       struct fwnode_handle *fwnode,

> +			       u32 flags)

> +{

> +	struct fwnode_handle *phy_fwnode;

> +	struct phy_device *phy_dev;

> +	int ret;

> +

> +	/* Fixed links and 802.3z are handled without needing a PHY */

> +	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||

> +	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&

> +	     phy_interface_mode_is_8023z(pl->link_interface)))

> +		return 0;

> +

> +	phy_fwnode = fwnode_get_phy_node(fwnode);

> +	if (IS_ERR(phy_fwnode)) {

> +		if (pl->cfg_link_an_mode == MLO_AN_PHY)

> +			return -ENODEV;

> +		return 0;

> +	}

> +

> +	phy_dev = fwnode_phy_find_device(phy_fwnode);

> +	/* We're done with the phy_node handle */

> +	fwnode_handle_put(phy_fwnode);


As per previous mail, who and when acquire this reference counting? Can it be
possible that caller will never call phylink_fwnode_phy_connect() and hence
reference counting will become disbalances?

We need to fix all this before the release.

> +	if (!phy_dev)

> +		return -ENODEV;

> +

> +	ret = phy_attach_direct(pl->netdev, phy_dev, flags,

> +				pl->link_interface);

> +	if (ret) {

> +		phy_device_free(phy_dev);

> +		return ret;

> +	}

> +

> +	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);

> +	if (ret)

> +		phy_detach(phy_dev);

> +

> +	return ret;

> +}


-- 
With Best Regards,
Andy Shevchenko
diff mbox series

Patch

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 96d8e88b4e46..9cc0f69faafe 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -5,6 +5,7 @@ 
  *
  * Copyright (C) 2015 Russell King
  */
+#include <linux/acpi.h>
 #include <linux/ethtool.h>
 #include <linux/export.h>
 #include <linux/gpio/consumer.h>
@@ -1125,6 +1126,59 @@  int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 }
 EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
 
+/**
+ * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @fwnode: a pointer to a &struct fwnode_handle.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified @fwnode to the phylink instance specified
+ * by @pl.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags)
+{
+	struct fwnode_handle *phy_fwnode;
+	struct phy_device *phy_dev;
+	int ret;
+
+	/* Fixed links and 802.3z are handled without needing a PHY */
+	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+	     phy_interface_mode_is_8023z(pl->link_interface)))
+		return 0;
+
+	phy_fwnode = fwnode_get_phy_node(fwnode);
+	if (IS_ERR(phy_fwnode)) {
+		if (pl->cfg_link_an_mode == MLO_AN_PHY)
+			return -ENODEV;
+		return 0;
+	}
+
+	phy_dev = fwnode_phy_find_device(phy_fwnode);
+	/* We're done with the phy_node handle */
+	fwnode_handle_put(phy_fwnode);
+	if (!phy_dev)
+		return -ENODEV;
+
+	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+				pl->link_interface);
+	if (ret) {
+		phy_device_free(phy_dev);
+		return ret;
+	}
+
+	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+	if (ret)
+		phy_detach(phy_dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
+
 /**
  * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
  *   instance.
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index fd2acfd9b597..afb3ded0b691 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -441,6 +441,9 @@  void phylink_destroy(struct phylink *);
 
 int phylink_connect_phy(struct phylink *, struct phy_device *);
 int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags);
 void phylink_disconnect_phy(struct phylink *);
 
 void phylink_mac_change(struct phylink *, bool up);