diff mbox series

[2/2] watchdog: iTCO_wdt: use dev_err() instead of pr_err()

Message ID 20210616181708.19530-2-info@metux.net
State New
Headers show
Series None | expand

Commit Message

Enrico Weigelt, metux IT consult June 16, 2021, 6:17 p.m. UTC
Use dev_err() instead of pr_err(), so device name is also shown in the log.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
---
 drivers/watchdog/iTCO_wdt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Guenter Roeck June 17, 2021, 2:02 a.m. UTC | #1
On Wed, Jun 16, 2021 at 08:17:08PM +0200, Enrico Weigelt, metux IT consult wrote:
> Use dev_err() instead of pr_err(), so device name is also shown in the log.

> 

> Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>


Reviewed-by: Guenter Roeck <linux@roeck-us.net>


> ---

>  drivers/watchdog/iTCO_wdt.c | 4 ++--

>  1 file changed, 2 insertions(+), 2 deletions(-)

> 

> diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c

> index 6ba2b2f60737..35ff8d3fd9fc 100644

> --- a/drivers/watchdog/iTCO_wdt.c

> +++ b/drivers/watchdog/iTCO_wdt.c

> @@ -479,13 +479,13 @@ static int iTCO_wdt_probe(struct platform_device *pdev)

>  		if (!devm_request_region(dev, p->smi_res->start,

>  					 resource_size(p->smi_res),

>  					 pdev->name)) {

> -			pr_err("I/O address 0x%04llx already in use, device disabled\n",

> +			dev_err(dev, "I/O address 0x%04llx already in use, device disabled\n",

>  			       (u64)SMI_EN(p));

>  			return -EBUSY;

>  		}

>  	} else if (iTCO_vendorsupport ||

>  		   turn_SMI_watchdog_clear_off >= p->iTCO_version) {

> -		pr_err("SMI I/O resource is missing\n");

> +		dev_err(dev, "SMI I/O resource is missing\n");

>  		return -ENODEV;

>  	}

>  

> -- 

> 2.20.1

>
diff mbox series

Patch

diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 6ba2b2f60737..35ff8d3fd9fc 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -479,13 +479,13 @@  static int iTCO_wdt_probe(struct platform_device *pdev)
 		if (!devm_request_region(dev, p->smi_res->start,
 					 resource_size(p->smi_res),
 					 pdev->name)) {
-			pr_err("I/O address 0x%04llx already in use, device disabled\n",
+			dev_err(dev, "I/O address 0x%04llx already in use, device disabled\n",
 			       (u64)SMI_EN(p));
 			return -EBUSY;
 		}
 	} else if (iTCO_vendorsupport ||
 		   turn_SMI_watchdog_clear_off >= p->iTCO_version) {
-		pr_err("SMI I/O resource is missing\n");
+		dev_err(dev, "SMI I/O resource is missing\n");
 		return -ENODEV;
 	}