diff mbox series

[05/12] wilc1000: add reset/terminate/repeat command support for SPI bus

Message ID 20210423182925.5865-6-ajay.kathat@microchip.com
State New
Headers show
Series wilc1000: added chip wakeup support and few fixes | expand

Commit Message

Ajay Singh April 23, 2021, 6:29 p.m. UTC 
From: Ajay Singh <ajay.kathat@microchip.com>

Added API to send reset/terminate/repeat SPI commands to FW.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
 drivers/net/wireless/microchip/wilc1000/spi.c | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

Comments

Kalle Valo June 24, 2021, 9:28 a.m. UTC | #1 
<Ajay.Kathat@microchip.com> writes:

> From: Ajay Singh <ajay.kathat@microchip.com>

>

> Added API to send reset/terminate/repeat SPI commands to FW.


Why? I'm guessing because you need it in the next patch, but please
document that clearly in the commit log so that people don't need to
guess.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
diff mbox series

Patch

diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
index 1472e9843896..607c8b642865 100644
--- a/drivers/net/wireless/microchip/wilc1000/spi.c
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -143,6 +143,12 @@  struct wilc_spi_rsp_data {
 	u8 data[];
 } __packed;
 
+struct wilc_spi_special_cmd_rsp {
+	u8 skip_byte;
+	u8 rsp_cmd_type;
+	u8 status;
+} __packed;
+
 static int wilc_bus_probe(struct spi_device *spi)
 {
 	int ret;
@@ -705,6 +711,61 @@  static int wilc_spi_dma_rw(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz)
 	return 0;
 }
 
+static int wilc_spi_special_cmd(struct wilc *wilc, u8 cmd)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	struct wilc_spi *spi_priv = wilc->bus_data;
+	u8 wb[32], rb[32];
+	int cmd_len, resp_len = 0;
+	struct wilc_spi_cmd *c;
+	struct wilc_spi_special_cmd_rsp *r;
+
+	if (cmd != CMD_TERMINATE && cmd != CMD_REPEAT && cmd != CMD_RESET)
+		return -EINVAL;
+
+	memset(wb, 0x0, sizeof(wb));
+	memset(rb, 0x0, sizeof(rb));
+	c = (struct wilc_spi_cmd *)wb;
+	c->cmd_type = cmd;
+
+	if (cmd == CMD_RESET)
+		memset(c->u.simple_cmd.addr, 0xFF, 3);
+
+	cmd_len = offsetof(struct wilc_spi_cmd, u.simple_cmd.crc);
+	resp_len = sizeof(*r);
+
+	if (spi_priv->crc7_enabled) {
+		c->u.simple_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
+		cmd_len += 1;
+	}
+	if (cmd_len + resp_len > ARRAY_SIZE(wb)) {
+		dev_err(&spi->dev, "spi buffer size too small (%d) (%d) (%zu)\n",
+			cmd_len, resp_len, ARRAY_SIZE(wb));
+		return -EINVAL;
+	}
+
+	if (wilc_spi_tx_rx(wilc, wb, rb, cmd_len + resp_len)) {
+		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
+		return -EINVAL;
+	}
+
+	r = (struct wilc_spi_special_cmd_rsp *)&rb[cmd_len];
+	if (r->rsp_cmd_type != cmd) {
+		if (!spi_priv->probing_crc)
+			dev_err(&spi->dev,
+				"Failed cmd response, cmd (%02x), resp (%02x)\n",
+				cmd, r->rsp_cmd_type);
+		return -EINVAL;
+	}
+
+	if (r->status != WILC_SPI_COMMAND_STAT_SUCCESS) {
+		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
+			r->status);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
 {
 	struct spi_device *spi = to_spi_device(wilc->dev);