| Message ID | 20210704013314.200951-3-bryan.odonoghue@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Implement role-switch notifications from dwc3-drd to dwc3-qcom | expand |
On 21-07-04 02:33:13, Bryan O'Donoghue wrote: > Add the ability to relay a role switch message from the core to the parent > device of the controller. > > This is useful for the qcom-dwc3 wrapper which wants to receive role-switch > notifications in order to waggle internal SoC UTMI signals. > > Having the core trigger the parent wrapper has the advantage of keeping the > connector mechanism agnostic from dwc3 wrapper code and means that any > other wrapper implementation on any other SoC or architecture need not > write custom code to find various types of Type-C role switch mechanisms. If I understand correctly, the call trace like below: Connector (GPIO/Type-C, usb_role_switch_set_role) -> dwc3 core (func: dwc3_usb_role_switch_set) -> dwc3 qcom glue (func: dwc3_qcom_usb_role_switch_set) And, at dts, the property "usb-role-switch" will be at both dwc3 glue and core node dwc3 core is the connector (GPIO/Type-C)'s role switch dwc3 glue is the dwc3 core's role switch right? Peter > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > drivers/usb/dwc3/core.h | 2 ++ > drivers/usb/dwc3/drd.c | 10 ++++++++++ > 2 files changed, 12 insertions(+) > > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > index dccdf13b5f9e..974104cc16f7 100644 > --- a/drivers/usb/dwc3/core.h > +++ b/drivers/usb/dwc3/core.h > @@ -993,6 +993,7 @@ struct dwc3_scratchpad_array { > * - USBPHY_INTERFACE_MODE_UTMI > * - USBPHY_INTERFACE_MODE_UTMIW > * @role_sw: usb_role_switch handle > + * @role_sw_relay: usb_role_switch relay handle > * @role_switch_default_mode: default operation mode of controller while > * usb role is USB_ROLE_NONE. > * @usb_psy: pointer to power supply interface. > @@ -1136,6 +1137,7 @@ struct dwc3 { > struct notifier_block edev_nb; > enum usb_phy_interface hsphy_mode; > struct usb_role_switch *role_sw; > + struct usb_role_switch *role_sw_relay; > enum usb_dr_mode role_switch_default_mode; > > struct power_supply *usb_psy; > diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c > index 8fcbac10510c..74293861bd8f 100644 > --- a/drivers/usb/dwc3/drd.c > +++ b/drivers/usb/dwc3/drd.c > @@ -507,6 +507,9 @@ static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, > } > > dwc3_set_mode(dwc, mode); > + if (dwc->role_sw_relay) > + usb_role_switch_set_role(dwc->role_sw_relay, role); > + > return 0; > } > > @@ -563,6 +566,10 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc) > if (IS_ERR(dwc->role_sw)) > return PTR_ERR(dwc->role_sw); > > + dwc->role_sw_relay = usb_role_switch_get(dwc->dev); > + if (IS_ERR(dwc->role_sw_relay)) > + return PTR_ERR(dwc->role_sw_relay); > + > dwc3_set_mode(dwc, mode); > return 0; > } > @@ -630,6 +637,9 @@ void dwc3_drd_exit(struct dwc3 *dwc) > { > unsigned long flags; > > + if (dwc->role_sw_relay) > + usb_role_switch_put(dwc->role_sw_relay); > + > if (dwc->role_sw) > usb_role_switch_unregister(dwc->role_sw); > > -- > 2.30.1 > -- Thanks, Peter Chen
On Sat 03 Jul 20:33 CDT 2021, Bryan O'Donoghue wrote: > Add the ability to relay a role switch message from the core to the parent > device of the controller. > > This is useful for the qcom-dwc3 wrapper which wants to receive role-switch > notifications in order to waggle internal SoC UTMI signals. > > Having the core trigger the parent wrapper has the advantage of keeping the > connector mechanism agnostic from dwc3 wrapper code and means that any > other wrapper implementation on any other SoC or architecture need not > write custom code to find various types of Type-C role switch mechanisms. > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > drivers/usb/dwc3/core.h | 2 ++ > drivers/usb/dwc3/drd.c | 10 ++++++++++ > 2 files changed, 12 insertions(+) > > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > index dccdf13b5f9e..974104cc16f7 100644 > --- a/drivers/usb/dwc3/core.h > +++ b/drivers/usb/dwc3/core.h > @@ -993,6 +993,7 @@ struct dwc3_scratchpad_array { > * - USBPHY_INTERFACE_MODE_UTMI > * - USBPHY_INTERFACE_MODE_UTMIW > * @role_sw: usb_role_switch handle > + * @role_sw_relay: usb_role_switch relay handle > * @role_switch_default_mode: default operation mode of controller while > * usb role is USB_ROLE_NONE. > * @usb_psy: pointer to power supply interface. > @@ -1136,6 +1137,7 @@ struct dwc3 { > struct notifier_block edev_nb; > enum usb_phy_interface hsphy_mode; > struct usb_role_switch *role_sw; > + struct usb_role_switch *role_sw_relay; > enum usb_dr_mode role_switch_default_mode; > > struct power_supply *usb_psy; > diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c > index 8fcbac10510c..74293861bd8f 100644 > --- a/drivers/usb/dwc3/drd.c > +++ b/drivers/usb/dwc3/drd.c > @@ -507,6 +507,9 @@ static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, > } > > dwc3_set_mode(dwc, mode); > + if (dwc->role_sw_relay) > + usb_role_switch_set_role(dwc->role_sw_relay, role); > + > return 0; > } > > @@ -563,6 +566,10 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc) > if (IS_ERR(dwc->role_sw)) > return PTR_ERR(dwc->role_sw); > > + dwc->role_sw_relay = usb_role_switch_get(dwc->dev); So you're going to rely on DT to create a role-switch link between the dwc3 core driver and the qcom wrapper? As I said the other day, this is just a hack to get around the fact that of_platform_populate() may return before the dwc3 core has probed. Another such case can be seen in [1], where Wesley is patching the DT node in runtime in order to pass a boolean parameter between the two driver parts. If we fix that we don't need these kinds of workarounds. [1] https://lore.kernel.org/linux-arm-msm/1625218655-14180-6-git-send-email-wcheng@codeaurora.org/ Regards, Bjorn > + if (IS_ERR(dwc->role_sw_relay)) > + return PTR_ERR(dwc->role_sw_relay); > + > dwc3_set_mode(dwc, mode); > return 0; > } > @@ -630,6 +637,9 @@ void dwc3_drd_exit(struct dwc3 *dwc) > { > unsigned long flags; > > + if (dwc->role_sw_relay) > + usb_role_switch_put(dwc->role_sw_relay); > + > if (dwc->role_sw) > usb_role_switch_unregister(dwc->role_sw); > > -- > 2.30.1 >
On 07/07/2021 06:14, Bjorn Andersson wrote: > So you're going to rely on DT to create a role-switch link between the > dwc3 core driver and the qcom wrapper? > > As I said the other day, this is just a hack to get around the fact that > of_platform_populate() may return before the dwc3 core has probed. A beautiful hack though > Another such case can be seen in [1], where Wesley is patching the DT > node in runtime in order to pass a boolean parameter between the two > driver parts. > > If we fix that we don't need these kinds of workarounds. OK, I understand/agree Lets look at changing the way dwc3-qcom launches dwc3-core and make it that 1. Probe deferral in dwc3-core either defers the dwc3-qcom code 2. Or that the dwc3-qcom code waits for dwc3-core either way instead of avoiding the fact that dwc3-core can defer we should make it that dwc3-qcom::probe() exits only when the dwc3-core is done --- bod
On 07/07/2021 10:49, Bryan O'Donoghue wrote: > On 07/07/2021 06:14, Bjorn Andersson wrote: >> So you're going to rely on DT to create a role-switch link between the >> dwc3 core driver and the qcom wrapper? >> >> As I said the other day, this is just a hack to get around the fact that >> of_platform_populate() may return before the dwc3 core has probed. > either way instead of avoiding the fact that dwc3-core can defer we > should make it that dwc3-qcom::probe() exits* only when the dwc3-core is *completes
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index dccdf13b5f9e..974104cc16f7 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -993,6 +993,7 @@ struct dwc3_scratchpad_array { * - USBPHY_INTERFACE_MODE_UTMI * - USBPHY_INTERFACE_MODE_UTMIW * @role_sw: usb_role_switch handle + * @role_sw_relay: usb_role_switch relay handle * @role_switch_default_mode: default operation mode of controller while * usb role is USB_ROLE_NONE. * @usb_psy: pointer to power supply interface. @@ -1136,6 +1137,7 @@ struct dwc3 { struct notifier_block edev_nb; enum usb_phy_interface hsphy_mode; struct usb_role_switch *role_sw; + struct usb_role_switch *role_sw_relay; enum usb_dr_mode role_switch_default_mode; struct power_supply *usb_psy; diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 8fcbac10510c..74293861bd8f 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -507,6 +507,9 @@ static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, } dwc3_set_mode(dwc, mode); + if (dwc->role_sw_relay) + usb_role_switch_set_role(dwc->role_sw_relay, role); + return 0; } @@ -563,6 +566,10 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc) if (IS_ERR(dwc->role_sw)) return PTR_ERR(dwc->role_sw); + dwc->role_sw_relay = usb_role_switch_get(dwc->dev); + if (IS_ERR(dwc->role_sw_relay)) + return PTR_ERR(dwc->role_sw_relay); + dwc3_set_mode(dwc, mode); return 0; } @@ -630,6 +637,9 @@ void dwc3_drd_exit(struct dwc3 *dwc) { unsigned long flags; + if (dwc->role_sw_relay) + usb_role_switch_put(dwc->role_sw_relay); + if (dwc->role_sw) usb_role_switch_unregister(dwc->role_sw);
Add the ability to relay a role switch message from the core to the parent device of the controller. This is useful for the qcom-dwc3 wrapper which wants to receive role-switch notifications in order to waggle internal SoC UTMI signals. Having the core trigger the parent wrapper has the advantage of keeping the connector mechanism agnostic from dwc3 wrapper code and means that any other wrapper implementation on any other SoC or architecture need not write custom code to find various types of Type-C role switch mechanisms. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- drivers/usb/dwc3/core.h | 2 ++ drivers/usb/dwc3/drd.c | 10 ++++++++++ 2 files changed, 12 insertions(+) -- 2.30.1