| Message ID | 20210707234315.242663-1-linus.walleij@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/2,v3] drm/panel: Add DT bindings for Samsung LMS380KF01 | expand |
Hi, On Wed, Jul 7, 2021 at 4:45 PM Linus Walleij <linus.walleij@linaro.org> wrote: > > This adds device tree bindings for the Samsung Mobile Displays > LMS380KF01 RGB DPI display panel. > > Cc: devicetree@vger.kernel.org > Cc: phone-devel@vger.kernel.org > Cc: Douglas Anderson <dianders@chromium.org> > Cc: Noralf Trønnes <noralf@tronnes.org> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > ChangeLog v2->v3: > - No changes just resending with the series. > ChangeLog v1->v2: > - Expect SPI bindings to be pulled in for the client and state > spi-cpha: true etc. > - Make port a required node. > - Update the example to use a proper SPI controller (spi-gpio) > so we get full validation of the example. > --- > .../display/panel/samsung,lms380kf01.yaml | 97 +++++++++++++++++++ > 1 file changed, 97 insertions(+) Reviewed-by: Douglas Anderson <dianders@chromium.org>
On Thu, 08 Jul 2021 01:43:14 +0200, Linus Walleij wrote: > This adds device tree bindings for the Samsung Mobile Displays > LMS380KF01 RGB DPI display panel. > > Cc: devicetree@vger.kernel.org > Cc: phone-devel@vger.kernel.org > Cc: Douglas Anderson <dianders@chromium.org> > Cc: Noralf Trønnes <noralf@tronnes.org> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > ChangeLog v2->v3: > - No changes just resending with the series. > ChangeLog v1->v2: > - Expect SPI bindings to be pulled in for the client and state > spi-cpha: true etc. > - Make port a required node. > - Update the example to use a proper SPI controller (spi-gpio) > so we get full validation of the example. > --- > .../display/panel/samsung,lms380kf01.yaml | 97 +++++++++++++++++++ > 1 file changed, 97 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml new file mode 100644 index 000000000000..ebc33c36c124 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,lms380kf01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung LMS380KF01 display panel + +description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile + Displays (SMD) utilizing the WideChips WS2401 display controller. It can be + used with internal or external backlight control. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,lms380kf01 + + reg: true + + interrupts: + description: provides an optional ESD (electrostatic discharge) + interrupt that signals abnormalities in the display hardware. + This can also be raised for other reasons like erroneous + configuration. + maxItems: 1 + + reset-gpios: true + + vci-supply: + description: regulator that supplies the VCI analog voltage + usually around 3.0 V + + vccio-supply: + description: regulator that supplies the VCCIO voltage usually + around 1.8 V + + backlight: true + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: + maximum: 1200000 + + port: true + +required: + - compatible + - reg + - spi-cpha + - spi-cpol + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + compatible = "spi-gpio"; + sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,lms380kf01"; + spi-max-frequency = <1200000>; + spi-cpha; + spi-cpol; + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&lcd_1v8_reg>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + +...
This adds device tree bindings for the Samsung Mobile Displays LMS380KF01 RGB DPI display panel. Cc: devicetree@vger.kernel.org Cc: phone-devel@vger.kernel.org Cc: Douglas Anderson <dianders@chromium.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - No changes just resending with the series. ChangeLog v1->v2: - Expect SPI bindings to be pulled in for the client and state spi-cpha: true etc. - Make port a required node. - Update the example to use a proper SPI controller (spi-gpio) so we get full validation of the example. --- .../display/panel/samsung,lms380kf01.yaml | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml