| Message ID | 20210705025032.12804-2-shawn.guo@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add 'qcom,pon-reboot-not-used' support in PON driver | expand |
On Mon, Jul 05, 2021 at 10:50:30AM +0800, Shawn Guo wrote: > It converts qcom,pon DT bindings from legacy bare text to YAML format. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > --- > .../bindings/power/reset/qcom,pon.txt | 49 ------------------- > .../bindings/power/reset/qcom,pon.yaml | 49 +++++++++++++++++++ > 2 files changed, 49 insertions(+), 49 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt > create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > deleted file mode 100644 > index 0c0dc3a1e693..000000000000 > --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > +++ /dev/null > @@ -1,49 +0,0 @@ > -Qualcomm PON Device > - > -The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey > -and resin along with the Android reboot-mode. > - > -This DT node has pwrkey and resin as sub nodes. > - > -Required Properties: > --compatible: Must be one of: > - "qcom,pm8916-pon" > - "qcom,pms405-pon" > - "qcom,pm8998-pon" > - > --reg: Specifies the physical address of the pon register > - > -Optional subnode: > --pwrkey: Specifies the subnode pwrkey and should follow the > - qcom,pm8941-pwrkey.txt description. > --resin: Specifies the subnode resin and should follow the > - qcom,pm8xxx-pwrkey.txt description. > - > -The rest of the properties should follow the generic reboot-mode description > -found in reboot-mode.txt > - > -Example: > - > - pon@800 { > - compatible = "qcom,pm8916-pon"; > - > - reg = <0x800>; > - mode-bootloader = <0x2>; > - mode-recovery = <0x1>; > - > - pwrkey { > - compatible = "qcom,pm8941-pwrkey"; > - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > - debounce = <15625>; > - bias-pull-up; > - linux,code = <KEY_POWER>; > - }; > - > - resin { > - compatible = "qcom,pm8941-resin"; > - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > - debounce = <15625>; > - bias-pull-up; > - linux,code = <KEY_VOLUMEDOWN>; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > new file mode 100644 > index 000000000000..7764c804af1d > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > @@ -0,0 +1,49 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm PON Device > + > +maintainers: > + - Vinod Koul <vkoul@kernel.org> > + > +description: | > + The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey > + and resin along with the Android reboot-mode. allOf: - $ref: /schemas/power/reset/reboot-mode.yaml# And then... > + > +properties: > + compatible: > + enum: > + - qcom,pm8916-pon > + - qcom,pms405-pon > + - qcom,pm8998-pon > + > + reg: > + maxItems: 1 > + > +patternProperties: > + "^mode-.+": > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: Vendor-specific mode value written to the mode register Drop this. > + > +required: > + - compatible > + - reg > + > +additionalProperties: false unevaluatedProperties: false > + > +examples: > + - | > + pmic { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pon@800 { > + compatible = "qcom,pm8916-pon"; > + reg = <0x800>; > + mode-bootloader = <0x2>; > + mode-recovery = <0x1>; > + }; > + }; > -- > 2.17.1 > >
On Mon, Jul 12, 2021 at 09:45:21AM -0600, Rob Herring wrote: > On Mon, Jul 05, 2021 at 10:50:30AM +0800, Shawn Guo wrote: > > It converts qcom,pon DT bindings from legacy bare text to YAML format. > > > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > > --- > > .../bindings/power/reset/qcom,pon.txt | 49 ------------------- > > .../bindings/power/reset/qcom,pon.yaml | 49 +++++++++++++++++++ > > 2 files changed, 49 insertions(+), 49 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt > > create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > > > > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > > deleted file mode 100644 > > index 0c0dc3a1e693..000000000000 > > --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > > +++ /dev/null > > @@ -1,49 +0,0 @@ > > -Qualcomm PON Device > > - > > -The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey > > -and resin along with the Android reboot-mode. > > - > > -This DT node has pwrkey and resin as sub nodes. > > - > > -Required Properties: > > --compatible: Must be one of: > > - "qcom,pm8916-pon" > > - "qcom,pms405-pon" > > - "qcom,pm8998-pon" > > - > > --reg: Specifies the physical address of the pon register > > - > > -Optional subnode: > > --pwrkey: Specifies the subnode pwrkey and should follow the > > - qcom,pm8941-pwrkey.txt description. > > --resin: Specifies the subnode resin and should follow the > > - qcom,pm8xxx-pwrkey.txt description. > > - > > -The rest of the properties should follow the generic reboot-mode description > > -found in reboot-mode.txt > > - > > -Example: > > - > > - pon@800 { > > - compatible = "qcom,pm8916-pon"; > > - > > - reg = <0x800>; > > - mode-bootloader = <0x2>; > > - mode-recovery = <0x1>; > > - > > - pwrkey { > > - compatible = "qcom,pm8941-pwrkey"; > > - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > > - debounce = <15625>; > > - bias-pull-up; > > - linux,code = <KEY_POWER>; > > - }; > > - > > - resin { > > - compatible = "qcom,pm8941-resin"; > > - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > > - debounce = <15625>; > > - bias-pull-up; > > - linux,code = <KEY_VOLUMEDOWN>; > > - }; > > - }; > > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > > new file mode 100644 > > index 000000000000..7764c804af1d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > > @@ -0,0 +1,49 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Qualcomm PON Device > > + > > +maintainers: > > + - Vinod Koul <vkoul@kernel.org> > > + > > +description: | > > + The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey > > + and resin along with the Android reboot-mode. > > allOf: > - $ref: /schemas/power/reset/reboot-mode.yaml# > > And then... > > > + > > +properties: > > + compatible: > > + enum: > > + - qcom,pm8916-pon > > + - qcom,pms405-pon > > + - qcom,pm8998-pon > > + > > + reg: > > + maxItems: 1 > > + > > +patternProperties: > > + "^mode-.+": > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: Vendor-specific mode value written to the mode register > > Drop this. Drop the description line only or the whole "^mode-.+" block? I got the following from dt_binding_check if dropping the whole block. pon@800: 'compatible', 'reg' do not match any of the regexes: '^mode-.*$', 'pinctrl-[0-9]+' > > > + > > +required: > > + - compatible > > + - reg > > + > > +additionalProperties: false > > unevaluatedProperties: false Replace additionalProperties with unevaluatedProperties, right? Shawn
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt deleted file mode 100644 index 0c0dc3a1e693..000000000000 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt +++ /dev/null @@ -1,49 +0,0 @@ -Qualcomm PON Device - -The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey -and resin along with the Android reboot-mode. - -This DT node has pwrkey and resin as sub nodes. - -Required Properties: --compatible: Must be one of: - "qcom,pm8916-pon" - "qcom,pms405-pon" - "qcom,pm8998-pon" - --reg: Specifies the physical address of the pon register - -Optional subnode: --pwrkey: Specifies the subnode pwrkey and should follow the - qcom,pm8941-pwrkey.txt description. --resin: Specifies the subnode resin and should follow the - qcom,pm8xxx-pwrkey.txt description. - -The rest of the properties should follow the generic reboot-mode description -found in reboot-mode.txt - -Example: - - pon@800 { - compatible = "qcom,pm8916-pon"; - - reg = <0x800>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - pwrkey { - compatible = "qcom,pm8941-pwrkey"; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_POWER>; - }; - - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; - }; diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml new file mode 100644 index 000000000000..7764c804af1d --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PON Device + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: | + The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey + and resin along with the Android reboot-mode. + +properties: + compatible: + enum: + - qcom,pm8916-pon + - qcom,pms405-pon + - qcom,pm8998-pon + + reg: + maxItems: 1 + +patternProperties: + "^mode-.+": + $ref: /schemas/types.yaml#/definitions/uint32 + description: Vendor-specific mode value written to the mode register + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pmic { + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + }; + };
It converts qcom,pon DT bindings from legacy bare text to YAML format. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- .../bindings/power/reset/qcom,pon.txt | 49 ------------------- .../bindings/power/reset/qcom,pon.yaml | 49 +++++++++++++++++++ 2 files changed, 49 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml -- 2.17.1