diff mbox series

bluez:fix btmon tools “Allow slave” to "Master Or Slave" #431 [hci0] 99.922927

Message ID 20210722021952.18260-1-wangyouwan@uniontech.com
State New
Headers show
Series bluez:fix btmon tools “Allow slave” to "Master Or Slave" #431 [hci0] 99.922927 | expand

Commit Message

Youwan Wang July 22, 2021, 2:19 a.m. UTC 
I want to explain it as　“Master Or Slave”, because this is explained in the Core_v5.2

    8.6.5 Role switch
    There are several occasions when a role switch is used:
    • A role switch is necessary in order to make a paging device a slave when
    joining an existing piconet, since by definition the paging device is initially
    master of a piconet involving the pager (master) and the paged (slave)
    device.
    • A role switch is necessary in order for a slave in an existing piconet to set up
    a new piconet with itself as master and the original piconet master as slave.
    If the original piconet had more than one slave, then this implies a double
    role for the original piconet master; it becomes a slave

Signed-off-by: wangyouwan <wangyouwan@uniontech.com>
---
 monitor/packet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

bluez.test.bot@gmail.com July 22, 2021, 3:02 a.m. UTC | #1 
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=519397

---Test result---

Test Summary:
CheckPatch                    FAIL      0.26 seconds
GitLint                       FAIL      0.11 seconds
Prep - Setup ELL              PASS      40.07 seconds
Build - Prep                  PASS      0.09 seconds
Build - Configure             PASS      6.91 seconds
Build - Make                  PASS      173.73 seconds
Make Check                    PASS      8.95 seconds
Make Distcheck                PASS      205.55 seconds
Build w/ext ELL - Configure   PASS      7.04 seconds
Build w/ext ELL - Make        PASS      163.65 seconds

Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
Output:
bluez:fix btmon tools “Allow slave” to "Master Or Slave" #431 [hci0] 99.922927
WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#11: 
I want to explain it as　“Master Or Slave”, because this is explained in the Core_v5.2

- total: 0 errors, 1 warnings, 8 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

"[PATCH] =?UTF-8?q?bluez:fix=20btmon=20tools=20=E2=80=9CAllow=20sl?=" has style problems, please review.

NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.


##############################
Test: GitLint - FAIL
Desc: Run gitlint with rule in .gitlint
Output:
bluez:fix btmon tools “Allow slave” to "Master Or Slave" #431 [hci0] 99.922927
1: T1 Title exceeds max length (78>72): "bluez:fix btmon tools “Allow slave” to "Master Or Slave" #431 [hci0] 99.922927"
3: B1 Line exceeds max length (85>80): "I want to explain it as　“Master Or Slave”, because this is explained in the Core_v5.2"
8: B1 Line exceeds max length (83>80): "    joining an existing piconet, since by definition the paging device is initially"
11: B1 Line exceeds max length (86>80): "    • A role switch is necessary in order for a slave in an existing piconet to set up"
12: B1 Line exceeds max length (81>80): "    a new piconet with itself as master and the original piconet master as slave."


##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL

##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build

##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree

##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree

##############################
Test: Make Check - PASS
Desc: Run 'make check'

##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution

##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration

##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration



---
Regards,
Linux Bluetooth
Barry Byford July 22, 2021, 7:07 a.m. UTC | #2 
On Thu, 22 Jul 2021 at 03:23, wangyouwan <wangyouwan@uniontech.com> wrote:
>
>     I want to explain it as　“Master Or Slave”, because this is explained in the Core_v5.2
>

There is now Core V5.3 which has been updated to use inclusive
language as outlined by Archie in his post:

https://marc.info/?l=linux-bluetooth&m=162195325125419&w=2

I think the terms should be Central or Peripheral. Here is the same
extract from the spec in v5.3

8.6.5 Role switch
There are several occasions when a role switch is used:
• A role switch is necessary in order to make a paging device a Peripheral
when joining an existing piconet, since by definition the paging device is
initially Central of a piconet involving the pager (Central) and the paged
(Peripheral) device.
• A role switch is necessary in order for a Peripheral in an existing piconet to
set up a new piconet with itself as Central and the original piconet Central as
Peripheral. If the original piconet had more than one Peripheral, then this
implies a double role for the original piconet Central; it becomes a Peripheral
in the new piconet while still maintaining the original piconet as Central.

>     8.6.5 Role switch
>     There are several occasions when a role switch is used:
>     • A role switch is necessary in order to make a paging device a slave when
>     joining an existing piconet, since by definition the paging device is initially
>     master of a piconet involving the pager (master) and the paged (slave)
>     device.
>     • A role switch is necessary in order for a slave in an existing piconet to set up
>     a new piconet with itself as master and the original piconet master as slave.
>     If the original piconet had more than one slave, then this implies a double
>     role for the original piconet master; it becomes a slave
>
> Signed-off-by: wangyouwan <wangyouwan@uniontech.com>
> ---
>  monitor/packet.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/monitor/packet.c b/monitor/packet.c
> index 52d22ab21..b73615509 100644
> --- a/monitor/packet.c
> +++ b/monitor/packet.c
> @@ -4143,7 +4143,7 @@ static void create_conn_cmd(const void *data, uint8_t size)
>                 str = "Stay master";
>                 break;
>         case 0x01:
> -               str = "Allow slave";
> +               str = "Master Or Slave";
>                 break;
>         default:
>                 str = "Reserved";
> --
> 2.20.1
>
>
>
diff mbox series

Patch

diff --git a/monitor/packet.c b/monitor/packet.c
index 52d22ab21..b73615509 100644
--- a/monitor/packet.c
+++ b/monitor/packet.c
@@ -4143,7 +4143,7 @@  static void create_conn_cmd(const void *data, uint8_t size)
 		str = "Stay master";
 		break;
 	case 0x01:
-		str = "Allow slave";
+		str = "Master Or Slave";
 		break;
 	default:
 		str = "Reserved";