| Message ID | 20210722171718.134034-1-aaron.ma@canonical.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] Bluetooth: btusb: Add support for Foxconn Mediatek Chip | expand |
Hi Aaron, > Add support for another Foxconn / Hon Hai device with MT7921 chip. > > T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e0cd Rev= 1.00 > S: Manufacturer=MediaTek Inc. > S: Product=Wireless_Device > S: SerialNumber=000000000 > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA > A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us > I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us > > Signed-off-by: Aaron Ma <aaron.ma@canonical.com> > --- > drivers/bluetooth/btusb.c | 3 +++ > 1 file changed, 3 insertions(+) patch has been applied to bluetooth-next tree. Regards Marcel
This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=519863 ---Test result--- Test Summary: CheckPatch PASS 0.44 seconds GitLint PASS 0.10 seconds BuildKernel PASS 517.64 seconds TestRunner: Setup PASS 344.79 seconds TestRunner: l2cap-tester PASS 2.59 seconds TestRunner: bnep-tester PASS 1.93 seconds TestRunner: mgmt-tester PASS 31.08 seconds TestRunner: rfcomm-tester PASS 2.13 seconds TestRunner: sco-tester PASS 2.05 seconds TestRunner: smp-tester FAIL 2.11 seconds TestRunner: userchan-tester PASS 1.95 seconds Details ############################## Test: CheckPatch - PASS - 0.44 seconds Run checkpatch.pl script with rule in .checkpatch.conf ############################## Test: GitLint - PASS - 0.10 seconds Run gitlint with rule in .gitlint ############################## Test: BuildKernel - PASS - 517.64 seconds Build Kernel with minimal configuration supports Bluetooth ############################## Test: TestRunner: Setup - PASS - 344.79 seconds Setup environment for running Test Runner ############################## Test: TestRunner: l2cap-tester - PASS - 2.59 seconds Run test-runner with l2cap-tester Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: bnep-tester - PASS - 1.93 seconds Run test-runner with bnep-tester Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: mgmt-tester - PASS - 31.08 seconds Run test-runner with mgmt-tester Total: 448, Passed: 445 (99.3%), Failed: 0, Not Run: 3 ############################## Test: TestRunner: rfcomm-tester - PASS - 2.13 seconds Run test-runner with rfcomm-tester Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: sco-tester - PASS - 2.05 seconds Run test-runner with sco-tester Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: smp-tester - FAIL - 2.11 seconds Run test-runner with smp-tester Total: 8, Passed: 7 (87.5%), Failed: 1, Not Run: 0 Failed Test Cases SMP Client - SC Request 2 Failed 0.023 seconds ############################## Test: TestRunner: userchan-tester - PASS - 1.95 seconds Run test-runner with userchan-tester Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 --- Regards, Linux Bluetooth
Hi Aaron, > Add support for another Foxconn / Hon Hai device with MT7921 chip. > > T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e0cd Rev= 1.00 > S: Manufacturer=MediaTek Inc. > S: Product=Wireless_Device > S: SerialNumber=000000000 > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA > A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us > I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us > > Signed-off-by: Aaron Ma <aaron.ma@canonical.com> > --- > drivers/bluetooth/btusb.c | 3 +++ > 1 file changed, 3 insertions(+) I can’t apply this cleanly to bluetooth-next tree. Please rebase it. Regards Marcel
Hi Marcel: On 7/29/21 7:48 PM, Marcel Holtmann wrote: > I can’t apply this cleanly to bluetooth-next tree. Please rebase it. > You have already applied in bluetooth-next branch master. Aaron > Regards > > Marcel >
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 1e5cac6f071b..7b69a97bd0e9 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -422,6 +422,9 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3563), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, /* Additional Realtek 8723AE Bluetooth devices */ { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
Add support for another Foxconn / Hon Hai device with MT7921 chip. T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0cd Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Aaron Ma <aaron.ma@canonical.com> --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+)