| Message ID | 1626868353-96475-5-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com |
|---|---|
| State | New |
| Headers | show |
| Series | pinctrl: pinctrl-zynq: yaml conversion and minor driver updates | expand |
On Wed, Jul 21, 2021 at 05:22:33PM +0530, Sai Krishna Potthuri wrote: > Replace 'io-standard' property with 'power-source' property in all zynq dts > files to be in sync with Zynq pinctrl driver. > > Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> > --- > arch/arm/boot/dts/zynq-ebaz4205.dts | 8 ++++---- > arch/arm/boot/dts/zynq-microzed.dts | 2 +- > arch/arm/boot/dts/zynq-zc702.dts | 20 ++++++++++---------- > arch/arm/boot/dts/zynq-zc706.dts | 18 +++++++++--------- > 4 files changed, 24 insertions(+), 24 deletions(-) > > diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts > index b0b836aedd76..be7eae611fb7 100644 > --- a/arch/arm/boot/dts/zynq-ebaz4205.dts > +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts > @@ -57,7 +57,7 @@ > > conf { > groups = "gpio0_20_grp", "gpio0_32_grp"; > - io-standard = <3>; > + power-source = <3>; This will break using a new DT with a kernel without patch 3.
On 7/29/21 9:59 PM, Rob Herring wrote: > On Wed, Jul 21, 2021 at 05:22:33PM +0530, Sai Krishna Potthuri wrote: >> Replace 'io-standard' property with 'power-source' property in all zynq dts >> files to be in sync with Zynq pinctrl driver. >> >> Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> >> --- >> arch/arm/boot/dts/zynq-ebaz4205.dts | 8 ++++---- >> arch/arm/boot/dts/zynq-microzed.dts | 2 +- >> arch/arm/boot/dts/zynq-zc702.dts | 20 ++++++++++---------- >> arch/arm/boot/dts/zynq-zc706.dts | 18 +++++++++--------- >> 4 files changed, 24 insertions(+), 24 deletions(-) >> >> diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts >> index b0b836aedd76..be7eae611fb7 100644 >> --- a/arch/arm/boot/dts/zynq-ebaz4205.dts >> +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts >> @@ -57,7 +57,7 @@ >> >> conf { >> groups = "gpio0_20_grp", "gpio0_32_grp"; >> - io-standard = <3>; >> + power-source = <3>; > > This will break using a new DT with a kernel without patch 3. > What do you suggest? Not to update any old DT? Thanks, Michal
On Thu, Jul 29, 2021 at 9:59 PM Rob Herring <robh@kernel.org> wrote: > On Wed, Jul 21, 2021 at 05:22:33PM +0530, Sai Krishna Potthuri wrote: > > Replace 'io-standard' property with 'power-source' property in all zynq dts > > files to be in sync with Zynq pinctrl driver. > > > > Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> > > --- > > arch/arm/boot/dts/zynq-ebaz4205.dts | 8 ++++---- > > arch/arm/boot/dts/zynq-microzed.dts | 2 +- > > arch/arm/boot/dts/zynq-zc702.dts | 20 ++++++++++---------- > > arch/arm/boot/dts/zynq-zc706.dts | 18 +++++++++--------- > > 4 files changed, 24 insertions(+), 24 deletions(-) > > > > diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts > > index b0b836aedd76..be7eae611fb7 100644 > > --- a/arch/arm/boot/dts/zynq-ebaz4205.dts > > +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts > > @@ -57,7 +57,7 @@ > > > > conf { > > groups = "gpio0_20_grp", "gpio0_32_grp"; > > - io-standard = <3>; > > + power-source = <3>; > > This will break using a new DT with a kernel without patch 3. The old (Linux) kernel never supported the "io-standard" property anyway. Unless someone is running som BSD or Windows with support for this property it can be merged by the quality of zero real-world impacts (no-one there to hear the tree fall in the forest). Sai Krishna: correct? Yours, Linus Walleij
On 7/30/21 2:43 PM, Linus Walleij wrote: > On Thu, Jul 29, 2021 at 9:59 PM Rob Herring <robh@kernel.org> wrote: >> On Wed, Jul 21, 2021 at 05:22:33PM +0530, Sai Krishna Potthuri wrote: >>> Replace 'io-standard' property with 'power-source' property in all zynq dts >>> files to be in sync with Zynq pinctrl driver. >>> >>> Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> >>> --- >>> arch/arm/boot/dts/zynq-ebaz4205.dts | 8 ++++---- >>> arch/arm/boot/dts/zynq-microzed.dts | 2 +- >>> arch/arm/boot/dts/zynq-zc702.dts | 20 ++++++++++---------- >>> arch/arm/boot/dts/zynq-zc706.dts | 18 +++++++++--------- >>> 4 files changed, 24 insertions(+), 24 deletions(-) >>> >>> diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts >>> index b0b836aedd76..be7eae611fb7 100644 >>> --- a/arch/arm/boot/dts/zynq-ebaz4205.dts >>> +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts >>> @@ -57,7 +57,7 @@ >>> >>> conf { >>> groups = "gpio0_20_grp", "gpio0_32_grp"; >>> - io-standard = <3>; >>> + power-source = <3>; >> >> This will break using a new DT with a kernel without patch 3. > > The old (Linux) kernel never supported the "io-standard" property > anyway. > > Unless someone is running som BSD or Windows with support for > this property it can be merged by the quality of zero real-world > impacts (no-one there to hear the tree fall in the forest). > > Sai Krishna: correct? Linux Zynq pinctrl driver and in tree dts files are using io-standard properties at least from 2015. M
On Fri, Jul 30, 2021 at 2:46 PM Michal Simek <michal.simek@xilinx.com> wrote: > Linux Zynq pinctrl driver and in tree dts files are using io-standard > properties at least from 2015. Ooops my wrong. What about supporting both the new property and io-standard as a fallback, simply? Yours, Linus Walleij
po 2. 8. 2021 v 15:20 odesÃlatel Linus Walleij <linus.walleij@linaro.org> napsal: > > On Fri, Jul 30, 2021 at 2:46 PM Michal Simek <michal.simek@xilinx.com> wrote: > > > Linux Zynq pinctrl driver and in tree dts files are using io-standard > > properties at least from 2015. > > Ooops my wrong. > > What about supporting both the new property and io-standard as > a fallback, simply? That's exactly what I have Sai to do and PIN_CONFIG_IOSTANDARD is still there. https://lore.kernel.org/linux-arm-kernel/1626868353-96475-1-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com/T/#md7d304d9d8f746e51d909237b9073f2ae8930543 But IIRC I have also asked to show any warning message when io standard property is used to convert to new property. Thanks, Michal
On 8/2/21 7:29 PM, Rob Herring wrote: > On Thu, Jul 29, 2021 at 10:59 PM Michal Simek <michal.simek@xilinx.com> wrote: >> >> >> >> On 7/29/21 9:59 PM, Rob Herring wrote: >>> On Wed, Jul 21, 2021 at 05:22:33PM +0530, Sai Krishna Potthuri wrote: >>>> Replace 'io-standard' property with 'power-source' property in all zynq dts >>>> files to be in sync with Zynq pinctrl driver. >>>> >>>> Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> >>>> --- >>>> arch/arm/boot/dts/zynq-ebaz4205.dts | 8 ++++---- >>>> arch/arm/boot/dts/zynq-microzed.dts | 2 +- >>>> arch/arm/boot/dts/zynq-zc702.dts | 20 ++++++++++---------- >>>> arch/arm/boot/dts/zynq-zc706.dts | 18 +++++++++--------- >>>> 4 files changed, 24 insertions(+), 24 deletions(-) >>>> >>>> diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts >>>> index b0b836aedd76..be7eae611fb7 100644 >>>> --- a/arch/arm/boot/dts/zynq-ebaz4205.dts >>>> +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts >>>> @@ -57,7 +57,7 @@ >>>> >>>> conf { >>>> groups = "gpio0_20_grp", "gpio0_32_grp"; >>>> - io-standard = <3>; >>>> + power-source = <3>; >>> >>> This will break using a new DT with a kernel without patch 3. >>> >> >> What do you suggest? Not to update any old DT? > > Your options are don't change the dts files, patch 3 needs to go to > stable kernels, or you document the breakage (if you don't care). There is no intention to go to stable kernel and I don't think this is stable material. Linus has applied 3 patches and this one should go via my tree. It means I will make sure that this DT change will be in the tree when pinctrl changes are applied. Thanks, Michal
Hi Rob, On 8/5/21 9:52 AM, Michal Simek wrote: > > > On 8/2/21 7:29 PM, Rob Herring wrote: >> On Thu, Jul 29, 2021 at 10:59 PM Michal Simek <michal.simek@xilinx.com> wrote: >>> >>> >>> >>> On 7/29/21 9:59 PM, Rob Herring wrote: >>>> On Wed, Jul 21, 2021 at 05:22:33PM +0530, Sai Krishna Potthuri wrote: >>>>> Replace 'io-standard' property with 'power-source' property in all zynq dts >>>>> files to be in sync with Zynq pinctrl driver. >>>>> >>>>> Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> >>>>> --- >>>>> arch/arm/boot/dts/zynq-ebaz4205.dts | 8 ++++---- >>>>> arch/arm/boot/dts/zynq-microzed.dts | 2 +- >>>>> arch/arm/boot/dts/zynq-zc702.dts | 20 ++++++++++---------- >>>>> arch/arm/boot/dts/zynq-zc706.dts | 18 +++++++++--------- >>>>> 4 files changed, 24 insertions(+), 24 deletions(-) >>>>> >>>>> diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts >>>>> index b0b836aedd76..be7eae611fb7 100644 >>>>> --- a/arch/arm/boot/dts/zynq-ebaz4205.dts >>>>> +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts >>>>> @@ -57,7 +57,7 @@ >>>>> >>>>> conf { >>>>> groups = "gpio0_20_grp", "gpio0_32_grp"; >>>>> - io-standard = <3>; >>>>> + power-source = <3>; >>>> >>>> This will break using a new DT with a kernel without patch 3. >>>> >>> >>> What do you suggest? Not to update any old DT? >> >> Your options are don't change the dts files, patch 3 needs to go to >> stable kernels, or you document the breakage (if you don't care). > > There is no intention to go to stable kernel and I don't think this is > stable material. Linus has applied 3 patches and this one should go via > my tree. It means I will make sure that this DT change will be in the > tree when pinctrl changes are applied. Any issue with this patch? Or can I apply it to my tree? Thanks, Michal
diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts index b0b836aedd76..be7eae611fb7 100644 --- a/arch/arm/boot/dts/zynq-ebaz4205.dts +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts @@ -57,7 +57,7 @@ conf { groups = "gpio0_20_grp", "gpio0_32_grp"; - io-standard = <3>; + power-source = <3>; slew-rate = <0>; }; @@ -75,7 +75,7 @@ conf { groups = "sdio0_2_grp"; - io-standard = <3>; + power-source = <3>; slew-rate = <0>; bias-disable; }; @@ -87,7 +87,7 @@ conf-cd { groups = "gpio0_34_grp"; - io-standard = <3>; + power-source = <3>; slew-rate = <0>; bias-high-impedance; bias-pull-up; @@ -102,7 +102,7 @@ conf { groups = "uart1_4_grp"; - io-standard = <3>; + power-source = <3>; slew-rate = <0>; }; diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts index 6ed84fb15902..f44a4464943b 100644 --- a/arch/arm/boot/dts/zynq-microzed.dts +++ b/arch/arm/boot/dts/zynq-microzed.dts @@ -71,7 +71,7 @@ conf { groups = "usb0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index cf70aff26c66..cf1e1cc3d132 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -206,7 +206,7 @@ conf { groups = "can0_9_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -229,7 +229,7 @@ conf { groups = "ethernet0_0_grp"; slew-rate = <0>; - io-standard = <4>; + power-source = <4>; }; conf-rx { @@ -252,7 +252,7 @@ conf-mdio { groups = "mdio0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; }; @@ -270,7 +270,7 @@ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", "gpio0_13_grp", "gpio0_14_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-pull-up { @@ -294,7 +294,7 @@ groups = "i2c0_10_grp"; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -307,7 +307,7 @@ conf { groups = "sdio0_2_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; @@ -321,7 +321,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; mux-wp { @@ -334,7 +334,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -347,7 +347,7 @@ conf { groups = "uart1_10_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -370,7 +370,7 @@ conf { groups = "usb0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 77943c16d33f..d21e3ae4ebb2 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -150,7 +150,7 @@ conf { groups = "ethernet0_0_grp"; slew-rate = <0>; - io-standard = <4>; + power-source = <4>; }; conf-rx { @@ -173,7 +173,7 @@ conf-mdio { groups = "mdio0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; }; @@ -187,7 +187,7 @@ conf { groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-pull-up { @@ -211,7 +211,7 @@ groups = "i2c0_10_grp"; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -224,7 +224,7 @@ conf { groups = "sdio0_2_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; @@ -238,7 +238,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; mux-wp { @@ -251,7 +251,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -264,7 +264,7 @@ conf { groups = "uart1_10_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -287,7 +287,7 @@ conf { groups = "usb0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx {
Replace 'io-standard' property with 'power-source' property in all zynq dts files to be in sync with Zynq pinctrl driver. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> --- arch/arm/boot/dts/zynq-ebaz4205.dts | 8 ++++---- arch/arm/boot/dts/zynq-microzed.dts | 2 +- arch/arm/boot/dts/zynq-zc702.dts | 20 ++++++++++---------- arch/arm/boot/dts/zynq-zc706.dts | 18 +++++++++--------- 4 files changed, 24 insertions(+), 24 deletions(-)