| Message ID | 20210716221744.5445-1-robert.marko@sartura.hr |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2] gpio: tn48m: Add support for Delta TN4810M CPLD | expand |
On Sat, Jul 17, 2021 at 12:17 AM Robert Marko <robert.marko@sartura.hr> wrote: > > Delta TN4810M uses a similar CPLD GPIO expander > like the TN48M, but it has pins for 48 SFP+ ports, > making a total of 192 pins. > It also provides the TX fault pins which the TN48M > does not. > > Only TX disable pins like on the TN48M are output > ones. > > Thankfully, regmap GPIO allows for the driver to be > easily extended to support the TN4810M. > > Note that this patch depends on the following series: > https://patchwork.ozlabs.org/project/linux-gpio/list/?series=247538 > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> > --- > drivers/gpio/gpio-tn48m.c | 56 ++++++++++++++++++++++++++++++++++++--- > 1 file changed, 52 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpio/gpio-tn48m.c b/drivers/gpio/gpio-tn48m.c > index b12a6b4bc4b3..e429e7ade941 100644 > --- a/drivers/gpio/gpio-tn48m.c > +++ b/drivers/gpio/gpio-tn48m.c > @@ -19,6 +19,10 @@ enum tn48m_gpio_type { > TN48M_SFP_TX_DISABLE = 1, > TN48M_SFP_PRESENT, > TN48M_SFP_LOS, > + TN4810M_SFP_TX_DISABLE, > + TN4810M_SFP_TX_FAULT, > + TN4810M_SFP_PRESENT, > + TN4810M_SFP_LOS, > }; > > static int tn48m_gpio_probe(struct platform_device *pdev) > @@ -46,17 +50,36 @@ static int tn48m_gpio_probe(struct platform_device *pdev) > > config.regmap = regmap; > config.parent = &pdev->dev; > - config.ngpio = 4; > + config.ngpio_per_reg = 8; > > switch (type) { > case TN48M_SFP_TX_DISABLE: > config.reg_set_base = base; > + config.ngpio = 4; > break; > case TN48M_SFP_PRESENT: > config.reg_dat_base = base; > + config.ngpio = 4; > break; > case TN48M_SFP_LOS: > config.reg_dat_base = base; > + config.ngpio = 4; > + break; > + case TN4810M_SFP_TX_DISABLE: > + config.reg_set_base = base; > + config.ngpio = 48; > + break; > + case TN4810M_SFP_TX_FAULT: > + config.reg_dat_base = base; > + config.ngpio = 48; > + break; > + case TN4810M_SFP_PRESENT: > + config.reg_dat_base = base; > + config.ngpio = 48; > + break; > + case TN4810M_SFP_LOS: > + config.reg_dat_base = base; > + config.ngpio = 48; > break; > default: > dev_err(&pdev->dev, "unknown type %d\n", type); > @@ -67,9 +90,34 @@ static int tn48m_gpio_probe(struct platform_device *pdev) > } > > static const struct of_device_id tn48m_gpio_of_match[] = { > - { .compatible = "delta,tn48m-gpio-sfp-tx-disable", .data = (void *)TN48M_SFP_TX_DISABLE }, > - { .compatible = "delta,tn48m-gpio-sfp-present", .data = (void *)TN48M_SFP_PRESENT }, > - { .compatible = "delta,tn48m-gpio-sfp-los", .data = (void *)TN48M_SFP_LOS }, > + { > + .compatible = "delta,tn48m-gpio-sfp-tx-disable", > + .data = (void *)TN48M_SFP_TX_DISABLE > + }, > + { > + .compatible = "delta,tn48m-gpio-sfp-present", > + .data = (void *)TN48M_SFP_PRESENT > + }, > + { > + .compatible = "delta,tn48m-gpio-sfp-los", > + .data = (void *)TN48M_SFP_LOS > + }, > + { > + .compatible = "delta,tn4810m-gpio-sfp-tx-disable", > + .data = (void *)TN4810M_SFP_TX_DISABLE > + }, > + { > + .compatible = "delta,tn4810m-gpio-sfp-tx-fault", > + .data = (void *)TN4810M_SFP_TX_FAULT > + }, > + { > + .compatible = "delta,tn4810m-gpio-sfp-present", > + .data = (void *)TN4810M_SFP_PRESENT > + }, > + { > + .compatible = "delta,tn4810m-gpio-sfp-los", > + .data = (void *)TN4810M_SFP_LOS > + }, > { } > }; > MODULE_DEVICE_TABLE(of, tn48m_gpio_of_match); > -- > 2.31.1 > This looks good to me. I suppose the other patches are going in through the MFD tree. I don't see anything that can fail here at build-time - can you confirm that I can pick these patches up separately for v5.15? Bartosz
On Mon, Aug 2, 2021 at 2:10 PM Bartosz Golaszewski <bgolaszewski@baylibre.com> wrote: > > On Sat, Jul 17, 2021 at 12:17 AM Robert Marko <robert.marko@sartura.hr> wrote: > > > > Delta TN4810M uses a similar CPLD GPIO expander > > like the TN48M, but it has pins for 48 SFP+ ports, > > making a total of 192 pins. > > It also provides the TX fault pins which the TN48M > > does not. > > > > Only TX disable pins like on the TN48M are output > > ones. > > > > Thankfully, regmap GPIO allows for the driver to be > > easily extended to support the TN4810M. > > > > Note that this patch depends on the following series: > > https://patchwork.ozlabs.org/project/linux-gpio/list/?series=247538 > > > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> > > --- > > drivers/gpio/gpio-tn48m.c | 56 ++++++++++++++++++++++++++++++++++++--- > > 1 file changed, 52 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/gpio/gpio-tn48m.c b/drivers/gpio/gpio-tn48m.c > > index b12a6b4bc4b3..e429e7ade941 100644 > > --- a/drivers/gpio/gpio-tn48m.c > > +++ b/drivers/gpio/gpio-tn48m.c > > @@ -19,6 +19,10 @@ enum tn48m_gpio_type { > > TN48M_SFP_TX_DISABLE = 1, > > TN48M_SFP_PRESENT, > > TN48M_SFP_LOS, > > + TN4810M_SFP_TX_DISABLE, > > + TN4810M_SFP_TX_FAULT, > > + TN4810M_SFP_PRESENT, > > + TN4810M_SFP_LOS, > > }; > > > > static int tn48m_gpio_probe(struct platform_device *pdev) > > @@ -46,17 +50,36 @@ static int tn48m_gpio_probe(struct platform_device *pdev) > > > > config.regmap = regmap; > > config.parent = &pdev->dev; > > - config.ngpio = 4; > > + config.ngpio_per_reg = 8; > > > > switch (type) { > > case TN48M_SFP_TX_DISABLE: > > config.reg_set_base = base; > > + config.ngpio = 4; > > break; > > case TN48M_SFP_PRESENT: > > config.reg_dat_base = base; > > + config.ngpio = 4; > > break; > > case TN48M_SFP_LOS: > > config.reg_dat_base = base; > > + config.ngpio = 4; > > + break; > > + case TN4810M_SFP_TX_DISABLE: > > + config.reg_set_base = base; > > + config.ngpio = 48; > > + break; > > + case TN4810M_SFP_TX_FAULT: > > + config.reg_dat_base = base; > > + config.ngpio = 48; > > + break; > > + case TN4810M_SFP_PRESENT: > > + config.reg_dat_base = base; > > + config.ngpio = 48; > > + break; > > + case TN4810M_SFP_LOS: > > + config.reg_dat_base = base; > > + config.ngpio = 48; > > break; > > default: > > dev_err(&pdev->dev, "unknown type %d\n", type); > > @@ -67,9 +90,34 @@ static int tn48m_gpio_probe(struct platform_device *pdev) > > } > > > > static const struct of_device_id tn48m_gpio_of_match[] = { > > - { .compatible = "delta,tn48m-gpio-sfp-tx-disable", .data = (void *)TN48M_SFP_TX_DISABLE }, > > - { .compatible = "delta,tn48m-gpio-sfp-present", .data = (void *)TN48M_SFP_PRESENT }, > > - { .compatible = "delta,tn48m-gpio-sfp-los", .data = (void *)TN48M_SFP_LOS }, > > + { > > + .compatible = "delta,tn48m-gpio-sfp-tx-disable", > > + .data = (void *)TN48M_SFP_TX_DISABLE > > + }, > > + { > > + .compatible = "delta,tn48m-gpio-sfp-present", > > + .data = (void *)TN48M_SFP_PRESENT > > + }, > > + { > > + .compatible = "delta,tn48m-gpio-sfp-los", > > + .data = (void *)TN48M_SFP_LOS > > + }, > > + { > > + .compatible = "delta,tn4810m-gpio-sfp-tx-disable", > > + .data = (void *)TN4810M_SFP_TX_DISABLE > > + }, > > + { > > + .compatible = "delta,tn4810m-gpio-sfp-tx-fault", > > + .data = (void *)TN4810M_SFP_TX_FAULT > > + }, > > + { > > + .compatible = "delta,tn4810m-gpio-sfp-present", > > + .data = (void *)TN4810M_SFP_PRESENT > > + }, > > + { > > + .compatible = "delta,tn4810m-gpio-sfp-los", > > + .data = (void *)TN4810M_SFP_LOS > > + }, > > { } > > }; > > MODULE_DEVICE_TABLE(of, tn48m_gpio_of_match); > > -- > > 2.31.1 > > > > This looks good to me. I suppose the other patches are going in > through the MFD tree. I don't see anything that can fail here at > build-time - can you confirm that I can pick these patches up > separately for v5.15? > > Bartosz Scratch that, I now saw Linus' comment about the special purpose pins under the other series. Let's clear that up first. Bart
On Mon, Aug 2, 2021 at 2:12 PM Bartosz Golaszewski <bgolaszewski@baylibre.com> wrote: > > On Mon, Aug 2, 2021 at 2:10 PM Bartosz Golaszewski > <bgolaszewski@baylibre.com> wrote: > > > > On Sat, Jul 17, 2021 at 12:17 AM Robert Marko <robert.marko@sartura.hr> wrote: > > > > > > Delta TN4810M uses a similar CPLD GPIO expander > > > like the TN48M, but it has pins for 48 SFP+ ports, > > > making a total of 192 pins. > > > It also provides the TX fault pins which the TN48M > > > does not. > > > > > > Only TX disable pins like on the TN48M are output > > > ones. > > > > > > Thankfully, regmap GPIO allows for the driver to be > > > easily extended to support the TN4810M. > > > > > > Note that this patch depends on the following series: > > > https://patchwork.ozlabs.org/project/linux-gpio/list/?series=247538 > > > > > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> > > > --- > > > drivers/gpio/gpio-tn48m.c | 56 ++++++++++++++++++++++++++++++++++++--- > > > 1 file changed, 52 insertions(+), 4 deletions(-) > > > > > > diff --git a/drivers/gpio/gpio-tn48m.c b/drivers/gpio/gpio-tn48m.c > > > index b12a6b4bc4b3..e429e7ade941 100644 > > > --- a/drivers/gpio/gpio-tn48m.c > > > +++ b/drivers/gpio/gpio-tn48m.c > > > @@ -19,6 +19,10 @@ enum tn48m_gpio_type { > > > TN48M_SFP_TX_DISABLE = 1, > > > TN48M_SFP_PRESENT, > > > TN48M_SFP_LOS, > > > + TN4810M_SFP_TX_DISABLE, > > > + TN4810M_SFP_TX_FAULT, > > > + TN4810M_SFP_PRESENT, > > > + TN4810M_SFP_LOS, > > > }; > > > > > > static int tn48m_gpio_probe(struct platform_device *pdev) > > > @@ -46,17 +50,36 @@ static int tn48m_gpio_probe(struct platform_device *pdev) > > > > > > config.regmap = regmap; > > > config.parent = &pdev->dev; > > > - config.ngpio = 4; > > > + config.ngpio_per_reg = 8; > > > > > > switch (type) { > > > case TN48M_SFP_TX_DISABLE: > > > config.reg_set_base = base; > > > + config.ngpio = 4; > > > break; > > > case TN48M_SFP_PRESENT: > > > config.reg_dat_base = base; > > > + config.ngpio = 4; > > > break; > > > case TN48M_SFP_LOS: > > > config.reg_dat_base = base; > > > + config.ngpio = 4; > > > + break; > > > + case TN4810M_SFP_TX_DISABLE: > > > + config.reg_set_base = base; > > > + config.ngpio = 48; > > > + break; > > > + case TN4810M_SFP_TX_FAULT: > > > + config.reg_dat_base = base; > > > + config.ngpio = 48; > > > + break; > > > + case TN4810M_SFP_PRESENT: > > > + config.reg_dat_base = base; > > > + config.ngpio = 48; > > > + break; > > > + case TN4810M_SFP_LOS: > > > + config.reg_dat_base = base; > > > + config.ngpio = 48; > > > break; > > > default: > > > dev_err(&pdev->dev, "unknown type %d\n", type); > > > @@ -67,9 +90,34 @@ static int tn48m_gpio_probe(struct platform_device *pdev) > > > } > > > > > > static const struct of_device_id tn48m_gpio_of_match[] = { > > > - { .compatible = "delta,tn48m-gpio-sfp-tx-disable", .data = (void *)TN48M_SFP_TX_DISABLE }, > > > - { .compatible = "delta,tn48m-gpio-sfp-present", .data = (void *)TN48M_SFP_PRESENT }, > > > - { .compatible = "delta,tn48m-gpio-sfp-los", .data = (void *)TN48M_SFP_LOS }, > > > + { > > > + .compatible = "delta,tn48m-gpio-sfp-tx-disable", > > > + .data = (void *)TN48M_SFP_TX_DISABLE > > > + }, > > > + { > > > + .compatible = "delta,tn48m-gpio-sfp-present", > > > + .data = (void *)TN48M_SFP_PRESENT > > > + }, > > > + { > > > + .compatible = "delta,tn48m-gpio-sfp-los", > > > + .data = (void *)TN48M_SFP_LOS > > > + }, > > > + { > > > + .compatible = "delta,tn4810m-gpio-sfp-tx-disable", > > > + .data = (void *)TN4810M_SFP_TX_DISABLE > > > + }, > > > + { > > > + .compatible = "delta,tn4810m-gpio-sfp-tx-fault", > > > + .data = (void *)TN4810M_SFP_TX_FAULT > > > + }, > > > + { > > > + .compatible = "delta,tn4810m-gpio-sfp-present", > > > + .data = (void *)TN4810M_SFP_PRESENT > > > + }, > > > + { > > > + .compatible = "delta,tn4810m-gpio-sfp-los", > > > + .data = (void *)TN4810M_SFP_LOS > > > + }, > > > { } > > > }; > > > MODULE_DEVICE_TABLE(of, tn48m_gpio_of_match); > > > -- > > > 2.31.1 > > > > > > > This looks good to me. I suppose the other patches are going in > > through the MFD tree. I don't see anything that can fail here at > > build-time - can you confirm that I can pick these patches up > > separately for v5.15? > > > > Bartosz > > Scratch that, I now saw Linus' comment about the special purpose pins > under the other series. Let's clear that up first. Yeah, I have finally replied to Linus, hopefully, we can clear it up. Thanks, Robert > > Bart -- Robert Marko Staff Embedded Linux Engineer Sartura Ltd. Lendavska ulica 16a 10000 Zagreb, Croatia Email: robert.marko@sartura.hr Web: www.sartura.hr
diff --git a/drivers/gpio/gpio-tn48m.c b/drivers/gpio/gpio-tn48m.c index b12a6b4bc4b3..e429e7ade941 100644 --- a/drivers/gpio/gpio-tn48m.c +++ b/drivers/gpio/gpio-tn48m.c @@ -19,6 +19,10 @@ enum tn48m_gpio_type { TN48M_SFP_TX_DISABLE = 1, TN48M_SFP_PRESENT, TN48M_SFP_LOS, + TN4810M_SFP_TX_DISABLE, + TN4810M_SFP_TX_FAULT, + TN4810M_SFP_PRESENT, + TN4810M_SFP_LOS, }; static int tn48m_gpio_probe(struct platform_device *pdev) @@ -46,17 +50,36 @@ static int tn48m_gpio_probe(struct platform_device *pdev) config.regmap = regmap; config.parent = &pdev->dev; - config.ngpio = 4; + config.ngpio_per_reg = 8; switch (type) { case TN48M_SFP_TX_DISABLE: config.reg_set_base = base; + config.ngpio = 4; break; case TN48M_SFP_PRESENT: config.reg_dat_base = base; + config.ngpio = 4; break; case TN48M_SFP_LOS: config.reg_dat_base = base; + config.ngpio = 4; + break; + case TN4810M_SFP_TX_DISABLE: + config.reg_set_base = base; + config.ngpio = 48; + break; + case TN4810M_SFP_TX_FAULT: + config.reg_dat_base = base; + config.ngpio = 48; + break; + case TN4810M_SFP_PRESENT: + config.reg_dat_base = base; + config.ngpio = 48; + break; + case TN4810M_SFP_LOS: + config.reg_dat_base = base; + config.ngpio = 48; break; default: dev_err(&pdev->dev, "unknown type %d\n", type); @@ -67,9 +90,34 @@ static int tn48m_gpio_probe(struct platform_device *pdev) } static const struct of_device_id tn48m_gpio_of_match[] = { - { .compatible = "delta,tn48m-gpio-sfp-tx-disable", .data = (void *)TN48M_SFP_TX_DISABLE }, - { .compatible = "delta,tn48m-gpio-sfp-present", .data = (void *)TN48M_SFP_PRESENT }, - { .compatible = "delta,tn48m-gpio-sfp-los", .data = (void *)TN48M_SFP_LOS }, + { + .compatible = "delta,tn48m-gpio-sfp-tx-disable", + .data = (void *)TN48M_SFP_TX_DISABLE + }, + { + .compatible = "delta,tn48m-gpio-sfp-present", + .data = (void *)TN48M_SFP_PRESENT + }, + { + .compatible = "delta,tn48m-gpio-sfp-los", + .data = (void *)TN48M_SFP_LOS + }, + { + .compatible = "delta,tn4810m-gpio-sfp-tx-disable", + .data = (void *)TN4810M_SFP_TX_DISABLE + }, + { + .compatible = "delta,tn4810m-gpio-sfp-tx-fault", + .data = (void *)TN4810M_SFP_TX_FAULT + }, + { + .compatible = "delta,tn4810m-gpio-sfp-present", + .data = (void *)TN4810M_SFP_PRESENT + }, + { + .compatible = "delta,tn4810m-gpio-sfp-los", + .data = (void *)TN4810M_SFP_LOS + }, { } }; MODULE_DEVICE_TABLE(of, tn48m_gpio_of_match);
Delta TN4810M uses a similar CPLD GPIO expander like the TN48M, but it has pins for 48 SFP+ ports, making a total of 192 pins. It also provides the TX fault pins which the TN48M does not. Only TX disable pins like on the TN48M are output ones. Thankfully, regmap GPIO allows for the driver to be easily extended to support the TN4810M. Note that this patch depends on the following series: https://patchwork.ozlabs.org/project/linux-gpio/list/?series=247538 Signed-off-by: Robert Marko <robert.marko@sartura.hr> --- drivers/gpio/gpio-tn48m.c | 56 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 52 insertions(+), 4 deletions(-)