| Message ID | 1317987936-4461-1-git-send-email-sachin.kamat@linaro.org |
|---|---|
| State | Accepted |
| Headers | show |
Sachin Kamat wrote: > > This patch enables the regulators for HDMI on Origen board. > > Since the DC5V line is connected directly to the HDMI connector, > "hdmi-en" regulator would become a dummy regulator on origen board > (by defining REGULATOR_DUMMY in the kernel config file). > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > arch/arm/mach-exynos4/mach-origen.c | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach- > origen.c > index 18909cf..39d8d4e 100644 > --- a/arch/arm/mach-exynos4/mach-origen.c > +++ b/arch/arm/mach-exynos4/mach-origen.c > @@ -89,6 +89,8 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { > > static struct regulator_consumer_supply __initdata ldo3_consumer[] = { > REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */ > + REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */ > + REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */ > }; > static struct regulator_consumer_supply __initdata ldo6_consumer[] = { > REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */ > @@ -98,6 +100,7 @@ static struct regulator_consumer_supply __initdata > ldo7_consumer[] = { > }; > static struct regulator_consumer_supply __initdata ldo8_consumer[] = { > REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */ > + REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */ > }; > static struct regulator_consumer_supply __initdata ldo9_consumer[] = { > REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 > BT */ > -- > 1.7.4.1 Looks ok to me, will apply. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index 18909cf..39d8d4e 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -89,6 +89,8 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { static struct regulator_consumer_supply __initdata ldo3_consumer[] = { REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */ + REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */ + REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */ }; static struct regulator_consumer_supply __initdata ldo6_consumer[] = { REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */ @@ -98,6 +100,7 @@ static struct regulator_consumer_supply __initdata ldo7_consumer[] = { }; static struct regulator_consumer_supply __initdata ldo8_consumer[] = { REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */ + REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */ }; static struct regulator_consumer_supply __initdata ldo9_consumer[] = { REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
This patch enables the regulators for HDMI on Origen board. Since the DC5V line is connected directly to the HDMI connector, "hdmi-en" regulator would become a dummy regulator on origen board (by defining REGULATOR_DUMMY in the kernel config file). Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> --- arch/arm/mach-exynos4/mach-origen.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)