| Message ID | 20210915173758.2608988-1-weiwan@google.com |
|---|---|
| State | New |
| Headers | show |
| Series | send.2: Add MSG_FASTOPEN flag | expand |
Hello, Wei! On 9/15/21 7:37 PM, Wei Wang wrote: > MSG_FASTOPEN flag is available since Linux 3.7. Add detailed description > in the manpage according to RFC7413. > > Signed-off-by: Wei Wang <weiwan@google.com> > Reviewed-by: Yuchung Cheng <ycheng@google.com> > Reviewed-by: Eric Dumazet <edumazet@google.com> > --- > man2/send.2 | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/man2/send.2 b/man2/send.2 > index fd28fed90..a40ae6214 100644 > --- a/man2/send.2 > +++ b/man2/send.2 > @@ -252,6 +252,33 @@ data on sockets that support this notion (e.g., of type > the underlying protocol must also support > .I out-of-band > data. > +.TP > +.BR MSG_FASTOPEN " (since Linux 3.7)" > +Attempts TCP Fast Open (RFC7413) and sends data in the SYN like a > +combination of > +.BR connect (2) > +and > +.BR write (2) You should merge the comma with the above, to avoid an unwanted space: .BR write (2), > +, by performing an implicit > +.BR connect (2) > +operation. It blocks until the data is buffered and the handshake Please use semantic newlines. See man-pages(7): Use semantic newlines In the source of a manual page, new sentences should be started on new lines, and long sentences should be split into lines at clause breaks (commas, semicolons, colons, and so on). This convention, sometimes known as "semantic newlines", makes it easier to see the effect of patches, which often operate at the level of individual sentences or sentence clauses. This is especially important after a period, since groff(1) will usually put 2 spaces after it, but if you hardcode it like above, it will only print 1 space. > +has completed. > +For a non-blocking socket, it returns the number of bytes buffered > +and sent in the SYN packet. If the cookie is not available locally, > +it returns > +.B EINPROGRESS .BR EINPROGRESS , > +, and sends a SYN with a Fast Open cookie request automatically. > +The caller needs to write the data again when the socket is connected. > +On errors, it returns the same errno as errno should be highlighted: .I errno Also, errno is set, not returned (as far as user space is concerned); so something along the lines of "errno is set by connect(2)" or "it can fail for the same reasons that connect(2) can". Michael probably knows if there's a typical wording for this in the current manual pages, to add some consistency. BTW, should anything be added to the ERRORS section? > +.BR connect (2) > +if the handshake fails. This flag requires enabling TCP Fast Open > +client support on sysctl net.ipv4.tcp_fastopen. net.ipv4.tcp_fastopen should be highlighted: .IR net.ipv4.tcp_fastopen . > + Also from man-pages(7): Formatting conventions (general) Paragraphs should be separated by suitable markers (usually either .PP or .IP). Do not separate paragraphs using blank lines, as this results in poor rendering in some output formats (such as PostScript and PDF). Thanks! Alex
On Wed, Sep 15, 2021 at 1:14 PM Alejandro Colomar (man-pages) <alx.manpages@gmail.com> wrote: > > Hello, Wei! > > On 9/15/21 7:37 PM, Wei Wang wrote: > > MSG_FASTOPEN flag is available since Linux 3.7. Add detailed description > > in the manpage according to RFC7413. > > > > Signed-off-by: Wei Wang <weiwan@google.com> > > Reviewed-by: Yuchung Cheng <ycheng@google.com> > > Reviewed-by: Eric Dumazet <edumazet@google.com> > > --- > > man2/send.2 | 27 +++++++++++++++++++++++++++ > > 1 file changed, 27 insertions(+) > > > > diff --git a/man2/send.2 b/man2/send.2 > > index fd28fed90..a40ae6214 100644 > > --- a/man2/send.2 > > +++ b/man2/send.2 > > @@ -252,6 +252,33 @@ data on sockets that support this notion (e.g., of type > > the underlying protocol must also support > > .I out-of-band > > data. > > +.TP > > +.BR MSG_FASTOPEN " (since Linux 3.7)" > > +Attempts TCP Fast Open (RFC7413) and sends data in the SYN like a > > +combination of > > +.BR connect (2) > > +and > > +.BR write (2) > > You should merge the comma with the above, to avoid an unwanted space: > > .BR write (2), > > > +, by performing an implicit > > +.BR connect (2) > > +operation. It blocks until the data is buffered and the handshake > > Please use semantic newlines. See man-pages(7): > > Use semantic newlines > In the source of a manual page, new sentences should be > started on new lines, and long sentences should be split > into lines at clause breaks (commas, semicolons, colons, > and so on). This convention, sometimes known as "semantic > newlines", makes it easier to see the effect of patches, > which often operate at the level of individual sentences or > sentence clauses. > > > This is especially important after a period, since groff(1) will usually > put 2 spaces after it, but if you hardcode it like above, it will only > print 1 space. > > > > +has completed. > > +For a non-blocking socket, it returns the number of bytes buffered > > +and sent in the SYN packet. If the cookie is not available locally, > > +it returns > > +.B EINPROGRESS > > .BR EINPROGRESS , > > > +, and sends a SYN with a Fast Open cookie request automatically. > > +The caller needs to write the data again when the socket is connected. > > +On errors, it returns the same errno as > > errno should be highlighted: > > .I errno > > Also, errno is set, not returned (as far as user space is concerned); so > something along the lines of "errno is set by connect(2)" or "it can > fail for the same reasons that connect(2) can". Michael probably knows > if there's a typical wording for this in the current manual pages, to > add some consistency. > > BTW, should anything be added to the ERRORS section? > > > +.BR connect (2) > +if the handshake fails. This flag requires enabling TCP Fast Open > > +client support on sysctl net.ipv4.tcp_fastopen. > > net.ipv4.tcp_fastopen should be highlighted: > > .IR net.ipv4.tcp_fastopen . > > > + > > Also from man-pages(7): > > Formatting conventions (general) > Paragraphs should be separated by suitable markers (usually > either .PP or .IP). Do not separate paragraphs using blank > lines, as this results in poor rendering in some output > formats (such as PostScript and PDF). > > > Thanks! > > Alex Thanks Alex! Will address those and send out v2. > > > > -- > Alejandro Colomar > Linux man-pages comaintainer; https://www.kernel.org/doc/man-pages/ > http://www.alejandro-colomar.es/
diff --git a/man2/send.2 b/man2/send.2 index fd28fed90..a40ae6214 100644 --- a/man2/send.2 +++ b/man2/send.2 @@ -252,6 +252,33 @@ data on sockets that support this notion (e.g., of type the underlying protocol must also support .I out-of-band data. +.TP +.BR MSG_FASTOPEN " (since Linux 3.7)" +Attempts TCP Fast Open (RFC7413) and sends data in the SYN like a +combination of +.BR connect (2) +and +.BR write (2) +, by performing an implicit +.BR connect (2) +operation. It blocks until the data is buffered and the handshake +has completed. +For a non-blocking socket, it returns the number of bytes buffered +and sent in the SYN packet. If the cookie is not available locally, +it returns +.B EINPROGRESS +, and sends a SYN with a Fast Open cookie request automatically. +The caller needs to write the data again when the socket is connected. +On errors, it returns the same errno as +.BR connect (2) +if the handshake fails. This flag requires enabling TCP Fast Open +client support on sysctl net.ipv4.tcp_fastopen. + +Refer to +.B TCP_FASTOPEN_CONNECT +socket option in +.BR tcp (7) +for an alternative approach. .SS sendmsg() The definition of the .I msghdr