diff mbox series

[v3,07/15] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML

Message ID 20211208003727.3596577-8-f.fainelli@gmail.com
State Accepted
Commit 07f7f6867ecabe9c807bb17ce7449bd6bfd3a8dc
Headers show
Series Broadcom DT bindings updates to YAML | expand

Commit Message

Florian Fainelli Dec. 8, 2021, 12:37 a.m. UTC
Convert the Broadcom BCM7120 Level 2 interrupt controller Device Tree
binding to YAML to help with validation.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../brcm,bcm7120-l2-intc.txt                  |  88 -------------
 .../brcm,bcm7120-l2-intc.yaml                 | 123 ++++++++++++++++++
 2 files changed, 123 insertions(+), 88 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml

Comments

Rob Herring Dec. 14, 2021, 6:06 p.m. UTC | #1
On Tue, Dec 07, 2021 at 04:37:18PM -0800, Florian Fainelli wrote:
> Convert the Broadcom BCM7120 Level 2 interrupt controller Device Tree
> binding to YAML to help with validation.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  .../brcm,bcm7120-l2-intc.txt                  |  88 -------------
>  .../brcm,bcm7120-l2-intc.yaml                 | 123 ++++++++++++++++++
>  2 files changed, 123 insertions(+), 88 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
> deleted file mode 100644
> index addd86b6ca2f..000000000000
> --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -Broadcom BCM7120-style Level 2 interrupt controller
> -
> -This interrupt controller hardware is a second level interrupt controller that
> -is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
> -platforms. It can be found on BCM7xxx products starting with BCM7120.
> -
> -Such an interrupt controller has the following hardware design:
> -
> -- outputs multiple interrupts signals towards its interrupt controller parent
> -
> -- controls how some of the interrupts will be flowing, whether they will
> -  directly output an interrupt signal towards the interrupt controller parent,
> -  or if they will output an interrupt signal at this 2nd level interrupt
> -  controller, in particular for UARTs
> -
> -- has one 32-bit enable word and one 32-bit status word
> -
> -- no atomic set/clear operations
> -
> -- not all bits within the interrupt controller actually map to an interrupt
> -
> -The typical hardware layout for this controller is represented below:
> -
> -2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
> -
> -0 -----[ MUX ] ------------|==========> GIC interrupt 75
> -          \-----------\
> -                       |
> -1 -----[ MUX ] --------)---|==========> GIC interrupt 76
> -          \------------|
> -                       |
> -2 -----[ MUX ] --------)---|==========> GIC interrupt 77
> -          \------------|
> -                       |
> -3 ---------------------|
> -4 ---------------------|
> -5 ---------------------|
> -7 ---------------------|---|===========> GIC interrupt 66
> -9 ---------------------|
> -10 --------------------|
> -11 --------------------/
> -
> -6 ------------------------\
> -                           |===========> GIC interrupt 64
> -8 ------------------------/
> -
> -12 ........................ X
> -13 ........................ X 		(not connected)
> -..
> -31 ........................ X
> -
> -Required properties:
> -
> -- compatible: should be "brcm,bcm7120-l2-intc"
> -- reg: specifies the base physical address and size of the registers
> -- interrupt-controller: identifies the node as an interrupt controller
> -- #interrupt-cells: specifies the number of cells needed to encode an interrupt
> -  source, should be 1.
> -- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
> -  node, valid values depend on the type of parent interrupt controller
> -- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
> -  are wired to this 2nd level interrupt controller, and how they match their
> -  respective interrupt parents. Should match exactly the number of interrupts
> -  specified in the 'interrupts' property.
> -
> -Optional properties:
> -
> -- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
> -  wakeup source for system suspend/resume.
> -
> -- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which
> -  have a mux gate, typically UARTs. Setting these bits will make their
> -  respective interrupt outputs bypass this 2nd level interrupt controller
> -  completely; it is completely transparent for the interrupt controller
> -  parent. This should have one 32-bit word per enable/status pair.
> -
> -Example:
> -
> -irq0_intc: interrupt-controller@f0406800 {
> -	compatible = "brcm,bcm7120-l2-intc";
> -	interrupt-parent = <&intc>;
> -	#interrupt-cells = <1>;
> -	reg = <0xf0406800 0x8>;
> -	interrupt-controller;
> -	interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
> -	brcm,int-map-mask = <0xeb8>, <0x140>;
> -	brcm,int-fwd-mask = <0x7>;
> -};
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
> new file mode 100644
> index 000000000000..e0c6dce40d13
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM7120-style Level 2 interrupt controller
> +
> +maintainers:
> +  - Florian Fainelli <f.fainelli@gmail.com>
> +
> +description: >
> +  This interrupt controller hardware is a second level interrupt controller that
> +  is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
> +  platforms. It can be found on BCM7xxx products starting with BCM7120.
> +
> +  Such an interrupt controller has the following hardware design:
> +
> +  - outputs multiple interrupts signals towards its interrupt controller parent
> +
> +  - controls how some of the interrupts will be flowing, whether they will
> +    directly output an interrupt signal towards the interrupt controller parent,
> +    or if they will output an interrupt signal at this 2nd level interrupt
> +    controller, in particular for UARTs
> +
> +  - has one 32-bit enable word and one 32-bit status word
> +
> +  - no atomic set/clear operations
> +
> +  - not all bits within the interrupt controller actually map to an interrupt
> +
> +  The typical hardware layout for this controller is represented below:
> +
> +  2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
> +
> +  0 -----[ MUX ] ------------|==========> GIC interrupt 75
> +            \-----------\
> +                         |
> +  1 -----[ MUX ] --------)---|==========> GIC interrupt 76
> +            \------------|
> +                         |
> +  2 -----[ MUX ] --------)---|==========> GIC interrupt 77
> +            \------------|
> +                         |
> +  3 ---------------------|
> +  4 ---------------------|
> +  5 ---------------------|
> +  7 ---------------------|---|===========> GIC interrupt 66
> +  9 ---------------------|
> +  10 --------------------|
> +  11 --------------------/
> +
> +  6 ------------------------\
> +                            |===========> GIC interrupt 64
> +  8 ------------------------/
> +
> +  12 ........................ X
> +  13 ........................ X 		(not connected)

space followed by tab.

> +  ..
> +  31 ........................ X
> +
> +allOf:
> +  - $ref: /schemas/interrupt-controller.yaml#
> +
> +properties:
> +  compatible:
> +    const: brcm,bcm7120-l2-intc
> +
> +  reg:
> +    description: >
> +      Specifies the base physical address and size of the registers

That's every 'reg'. How many?

> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  interrupts: true

No, how many and what are they if more than 1.

> +
> +  "brcm,int-map-mask":

No need for quotes.

> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: >
> +      32-bits bit mask describing how many and which interrupts are wired to
> +      this 2nd level interrupt controller, and how they match their respective
> +      interrupt parents. Should match exactly the number of interrupts
> +      specified in the 'interrupts' property.
> +
> +  brcm,irq-can-wake:
> +    type: boolean
> +    description: >
> +      If present, this means the L2 controller can be used as a wakeup source
> +      for system suspend/resume.
> +
> +  brcm,int-fwd-mask:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: >
> +      if present, a bit mask to configure the interrupts which have a mux gate,
> +      typically UARTs. Setting these bits will make their respective interrupt
> +      outputs bypass this 2nd level interrupt controller completely; it is
> +      completely transparent for the interrupt controller parent. This should
> +      have one 32-bit word per enable/status pair.
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +  - interrupts
> +
> +examples:
> +  - |
> +    irq0_intc: interrupt-controller@f0406800 {
> +      compatible = "brcm,bcm7120-l2-intc";
> +      interrupt-parent = <&intc>;
> +      #interrupt-cells = <1>;
> +      reg = <0xf0406800 0x8>;
> +      interrupt-controller;
> +      interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
> +      brcm,int-map-mask = <0xeb8>, <0x140>;
> +      brcm,int-fwd-mask = <0x7>;
> +    };
> -- 
> 2.25.1
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
deleted file mode 100644
index addd86b6ca2f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
+++ /dev/null
@@ -1,88 +0,0 @@ 
-Broadcom BCM7120-style Level 2 interrupt controller
-
-This interrupt controller hardware is a second level interrupt controller that
-is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
-platforms. It can be found on BCM7xxx products starting with BCM7120.
-
-Such an interrupt controller has the following hardware design:
-
-- outputs multiple interrupts signals towards its interrupt controller parent
-
-- controls how some of the interrupts will be flowing, whether they will
-  directly output an interrupt signal towards the interrupt controller parent,
-  or if they will output an interrupt signal at this 2nd level interrupt
-  controller, in particular for UARTs
-
-- has one 32-bit enable word and one 32-bit status word
-
-- no atomic set/clear operations
-
-- not all bits within the interrupt controller actually map to an interrupt
-
-The typical hardware layout for this controller is represented below:
-
-2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
-
-0 -----[ MUX ] ------------|==========> GIC interrupt 75
-          \-----------\
-                       |
-1 -----[ MUX ] --------)---|==========> GIC interrupt 76
-          \------------|
-                       |
-2 -----[ MUX ] --------)---|==========> GIC interrupt 77
-          \------------|
-                       |
-3 ---------------------|
-4 ---------------------|
-5 ---------------------|
-7 ---------------------|---|===========> GIC interrupt 66
-9 ---------------------|
-10 --------------------|
-11 --------------------/
-
-6 ------------------------\
-                           |===========> GIC interrupt 64
-8 ------------------------/
-
-12 ........................ X
-13 ........................ X 		(not connected)
-..
-31 ........................ X
-
-Required properties:
-
-- compatible: should be "brcm,bcm7120-l2-intc"
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
-  are wired to this 2nd level interrupt controller, and how they match their
-  respective interrupt parents. Should match exactly the number of interrupts
-  specified in the 'interrupts' property.
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which
-  have a mux gate, typically UARTs. Setting these bits will make their
-  respective interrupt outputs bypass this 2nd level interrupt controller
-  completely; it is completely transparent for the interrupt controller
-  parent. This should have one 32-bit word per enable/status pair.
-
-Example:
-
-irq0_intc: interrupt-controller@f0406800 {
-	compatible = "brcm,bcm7120-l2-intc";
-	interrupt-parent = <&intc>;
-	#interrupt-cells = <1>;
-	reg = <0xf0406800 0x8>;
-	interrupt-controller;
-	interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
-	brcm,int-map-mask = <0xeb8>, <0x140>;
-	brcm,int-fwd-mask = <0x7>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
new file mode 100644
index 000000000000..e0c6dce40d13
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -0,0 +1,123 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7120-style Level 2 interrupt controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: >
+  This interrupt controller hardware is a second level interrupt controller that
+  is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+  platforms. It can be found on BCM7xxx products starting with BCM7120.
+
+  Such an interrupt controller has the following hardware design:
+
+  - outputs multiple interrupts signals towards its interrupt controller parent
+
+  - controls how some of the interrupts will be flowing, whether they will
+    directly output an interrupt signal towards the interrupt controller parent,
+    or if they will output an interrupt signal at this 2nd level interrupt
+    controller, in particular for UARTs
+
+  - has one 32-bit enable word and one 32-bit status word
+
+  - no atomic set/clear operations
+
+  - not all bits within the interrupt controller actually map to an interrupt
+
+  The typical hardware layout for this controller is represented below:
+
+  2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
+
+  0 -----[ MUX ] ------------|==========> GIC interrupt 75
+            \-----------\
+                         |
+  1 -----[ MUX ] --------)---|==========> GIC interrupt 76
+            \------------|
+                         |
+  2 -----[ MUX ] --------)---|==========> GIC interrupt 77
+            \------------|
+                         |
+  3 ---------------------|
+  4 ---------------------|
+  5 ---------------------|
+  7 ---------------------|---|===========> GIC interrupt 66
+  9 ---------------------|
+  10 --------------------|
+  11 --------------------/
+
+  6 ------------------------\
+                            |===========> GIC interrupt 64
+  8 ------------------------/
+
+  12 ........................ X
+  13 ........................ X 		(not connected)
+  ..
+  31 ........................ X
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7120-l2-intc
+
+  reg:
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts: true
+
+  "brcm,int-map-mask":
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      32-bits bit mask describing how many and which interrupts are wired to
+      this 2nd level interrupt controller, and how they match their respective
+      interrupt parents. Should match exactly the number of interrupts
+      specified in the 'interrupts' property.
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      if present, a bit mask to configure the interrupts which have a mux gate,
+      typically UARTs. Setting these bits will make their respective interrupt
+      outputs bypass this 2nd level interrupt controller completely; it is
+      completely transparent for the interrupt controller parent. This should
+      have one 32-bit word per enable/status pair.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    irq0_intc: interrupt-controller@f0406800 {
+      compatible = "brcm,bcm7120-l2-intc";
+      interrupt-parent = <&intc>;
+      #interrupt-cells = <1>;
+      reg = <0xf0406800 0x8>;
+      interrupt-controller;
+      interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
+      brcm,int-map-mask = <0xeb8>, <0x140>;
+      brcm,int-fwd-mask = <0x7>;
+    };