Message ID | 70b1de02-b674-ca17-9219-61fa8e1c00db@axentia.se |
---|---|
State | Superseded |
Headers | show |
Series | gpiolib: allow line names from device props to override driver names | expand |
On Thu, Dec 9, 2021 at 12:32 PM Peter Rosin <peda@axentia.se> wrote: > > Some gpio providers set names for gpio lines that match the names of > the pins on the SoC, or variations on that theme. These names are > generally generic, such as pioC12 in the at91 case. These generic names > block the possibility to name gpio lines with in device properties > (i.e. gpio-line-names). > > Allow overriding a generic name given by the gpio driver if there is > a name given to the gpio line using device properties, but leave the > generic name alone if no better name is available. > > However, there is a risk. If user space is depending on the above > mentioned fixed gpio names, AND there are device properties that > previously did not reach the surface, the name change might cause > regressions. But hopefully this stays below the radar... > > Signed-off-by: Peter Rosin <peda@axentia.se> > --- > drivers/gpio/gpiolib.c | 19 ++++++++++++++----- > 1 file changed, 14 insertions(+), 5 deletions(-) > > Instead of doing this only for pinctrl-at91.c as in my recent patch [1], do > it for everyone. > > Cheers, > Peter > > [1] https://lore.kernel.org/lkml/4d17866a-d9a4-a3d7-189a-781d18dbea00@axentia.se/ > > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c > index abfbf546d159..00a2a689c202 100644 > --- a/drivers/gpio/gpiolib.c > +++ b/drivers/gpio/gpiolib.c > @@ -422,8 +422,15 @@ static int devprop_gpiochip_set_names(struct gpio_chip *chip) > if (count > chip->ngpio) > count = chip->ngpio; > > - for (i = 0; i < count; i++) > - gdev->descs[i].name = names[chip->offset + i]; > + for (i = 0; i < count; i++) { > + /* > + * Allow overriding "fixed" names provided by the gpio > + * provider, the "fixed" names are generally generic and less > + * informative than the names given in device properties. > + */ > + if (names[chip->offset + i] && names[chip->offset + i][0]) > + gdev->descs[i].name = names[chip->offset + i]; > + } > > kfree(names); > > @@ -708,10 +715,12 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, > INIT_LIST_HEAD(&gdev->pin_ranges); > #endif > > - if (gc->names) > + if (gc->names) { > ret = gpiochip_set_desc_names(gc); > - else > - ret = devprop_gpiochip_set_names(gc); > + if (ret) > + goto err_remove_from_list; > + } > + ret = devprop_gpiochip_set_names(gc); > if (ret) > goto err_remove_from_list; > > -- > 2.20.1 > Hi Peter, This looks good, please resend with Andy's comments addressed so that I can pick it up. Bart
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index abfbf546d159..00a2a689c202 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -422,8 +422,15 @@ static int devprop_gpiochip_set_names(struct gpio_chip *chip) if (count > chip->ngpio) count = chip->ngpio; - for (i = 0; i < count; i++) - gdev->descs[i].name = names[chip->offset + i]; + for (i = 0; i < count; i++) { + /* + * Allow overriding "fixed" names provided by the gpio + * provider, the "fixed" names are generally generic and less + * informative than the names given in device properties. + */ + if (names[chip->offset + i] && names[chip->offset + i][0]) + gdev->descs[i].name = names[chip->offset + i]; + } kfree(names); @@ -708,10 +715,12 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, INIT_LIST_HEAD(&gdev->pin_ranges); #endif - if (gc->names) + if (gc->names) { ret = gpiochip_set_desc_names(gc); - else - ret = devprop_gpiochip_set_names(gc); + if (ret) + goto err_remove_from_list; + } + ret = devprop_gpiochip_set_names(gc); if (ret) goto err_remove_from_list;
Some gpio providers set names for gpio lines that match the names of the pins on the SoC, or variations on that theme. These names are generally generic, such as pioC12 in the at91 case. These generic names block the possibility to name gpio lines with in device properties (i.e. gpio-line-names). Allow overriding a generic name given by the gpio driver if there is a name given to the gpio line using device properties, but leave the generic name alone if no better name is available. However, there is a risk. If user space is depending on the above mentioned fixed gpio names, AND there are device properties that previously did not reach the surface, the name change might cause regressions. But hopefully this stays below the radar... Signed-off-by: Peter Rosin <peda@axentia.se> --- drivers/gpio/gpiolib.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) Instead of doing this only for pinctrl-at91.c as in my recent patch [1], do it for everyone. Cheers, Peter [1] https://lore.kernel.org/lkml/4d17866a-d9a4-a3d7-189a-781d18dbea00@axentia.se/