| Message ID | 20211216220946.20771-3-laurent.pinchart+renesas@ideasonboard.com |
|---|---|
| State | New |
| Headers | show |
| Series | media: i2c: max9286: Small new features | expand |
Hi Laurent, On Fri, Dec 17, 2021 at 12:09:45AM +0200, Laurent Pinchart wrote: > From: Thomas Nizan <tnizan@witekio.com> > > Allow users to use one PoC regulator per port, instead of a global > regulator. > > The properties '^port[0-3]-poc-supply$' in the DT node are used to > indicate the regulators for individual ports. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> These patches will badly conflic with the gpio-poc series :( > --- > drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++----- > 1 file changed, 98 insertions(+), 14 deletions(-) > > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c > index 7c663fd587bb..fa2f6a823fe6 100644 > --- a/drivers/media/i2c/max9286.c > +++ b/drivers/media/i2c/max9286.c > @@ -136,8 +136,10 @@ > #define MAX9286_SRC_PAD 4 > > struct max9286_source { > + unsigned int index; Can't you use the to_index() macro ? > struct v4l2_subdev *sd; > struct fwnode_handle *fwnode; > + struct regulator *regulator; > }; > > struct max9286_asd { > @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv) > return ret; > } > > +static int max9286_poc_power_on(struct max9286_priv *priv) > +{ > + struct max9286_source *source; > + unsigned int enabled = 0; > + int ret; > + > + /* Enable the global regulator if available. */ > + if (priv->regulator) > + return regulator_enable(priv->regulator); > + > + /* Otherwise use the per-port regulators. */ > + for_each_source(priv, source) { > + ret = regulator_enable(source->regulator); > + if (ret < 0) > + goto error; > + > + enabled |= BIT(source->index); > + } > + > + return 0; > + > +error: > + for_each_source(priv, source) { > + if (enabled & BIT(source->index)) > + regulator_disable(source->regulator); I would if a regulator can be unconditionally disabled... > + } > + > + return ret; > +} > + > +static void max9286_poc_power_off(struct max9286_priv *priv) > +{ > + struct max9286_source *source; > + > + if (priv->regulator) { > + regulator_disable(priv->regulator); > + return; > + } > + > + for_each_source(priv, source) > + regulator_disable(source->regulator); > +} > + > static int max9286_init(struct device *dev) > { > struct max9286_priv *priv; > @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev) > priv = i2c_get_clientdata(client); > > /* Enable the bus power. */ > - ret = regulator_enable(priv->regulator); > + ret = max9286_poc_power_on(priv); > if (ret < 0) { > - dev_err(&client->dev, "Unable to turn PoC on\n"); > + dev_err(dev, "Unable to turn PoC on\n"); > return ret; > } > > @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev) > err_v4l2_register: > max9286_v4l2_unregister(priv); > err_regulator: > - regulator_disable(priv->regulator); > + max9286_poc_power_off(priv); > > return ret; > } > @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv) > } > > source = &priv->sources[ep.port]; > + source->index = ep.port; > source->fwnode = fwnode_graph_get_remote_endpoint( > of_fwnode_handle(node)); > if (!source->fwnode) { > @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv) > return 0; > } > > +static int max9286_get_poc_supplies(struct max9286_priv *priv) > +{ > + struct device *dev = &priv->client->dev; > + struct max9286_source *source; > + > + /* > + * Start by getting the global regulator. Usage of the exclusive API is > + * required to receive an error in case the supply isn't specified in > + * the device tree. > + */ > + priv->regulator = devm_regulator_get_exclusive(dev, "poc"); doesn't get_optional() return -ENODEV if there's no such regulator too without locking the usage of the regulator ? Oh wait, maybe we want exclusive locking ? :) > + if (!IS_ERR(priv->regulator)) > + return 0; > + > + if (PTR_ERR(priv->regulator) != -ENODEV) { > + if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) > + dev_err(dev, "Unable to get PoC regulator: %ld\n", > + PTR_ERR(priv->regulator)); > + return PTR_ERR(priv->regulator); > + } > + > + /* If there's no global regulator, get per-port regulators. */ > + dev_dbg(dev, > + "No global PoC regulator, looking for per-port regulators\n"); > + priv->regulator = NULL; > + > + for_each_source(priv, source) { > + char name[10]; > + > + snprintf(name, sizeof(name), "port%u-poc", source->index); > + source->regulator = devm_regulator_get_exclusive(dev, name); I guess the fact we don't have a fixed number of sources makes it even harder to use the _bulk version of the regulators API... > + if (IS_ERR(source->regulator)) { > + if (PTR_ERR(source->regulator) != -EPROBE_DEFER) > + dev_err(dev, > + "Unable to get port %u PoC regulator: %ld\n", > + source->index, > + PTR_ERR(source->regulator)); > + return PTR_ERR(source->regulator); > + } > + } > + > + return 0; > +} > + > static int max9286_probe(struct i2c_client *client) > { > struct max9286_priv *priv; > @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client) > if (ret) > goto err_powerdown; > > - priv->regulator = devm_regulator_get(&client->dev, "poc"); > - if (IS_ERR(priv->regulator)) { > - if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) > - dev_err(&client->dev, > - "Unable to get PoC regulator (%ld)\n", > - PTR_ERR(priv->regulator)); > - ret = PTR_ERR(priv->regulator); > - goto err_powerdown; > - } > - > ret = max9286_parse_dt(priv); > + if (ret) > + goto err_cleanup_dt; > + > + ret = max9286_get_poc_supplies(priv); > if (ret) > goto err_powerdown; I think the error path is wrong, you should cleanup_dt here. Thanks j > > @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client) > > max9286_v4l2_unregister(priv); > > - regulator_disable(priv->regulator); > + max9286_poc_power_off(priv); > > gpiod_set_value_cansleep(priv->gpiod_pwdn, 0); > > -- > Regards, > > Laurent Pinchart >
Hello again On Fri, Dec 17, 2021 at 12:09:45AM +0200, Laurent Pinchart wrote: > From: Thomas Nizan <tnizan@witekio.com> > > Allow users to use one PoC regulator per port, instead of a global > regulator. > > The properties '^port[0-3]-poc-supply$' in the DT node are used to > indicate the regulators for individual ports. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++----- > 1 file changed, 98 insertions(+), 14 deletions(-) > > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c > index 7c663fd587bb..fa2f6a823fe6 100644 > --- a/drivers/media/i2c/max9286.c > +++ b/drivers/media/i2c/max9286.c > @@ -136,8 +136,10 @@ > #define MAX9286_SRC_PAD 4 > > struct max9286_source { > + unsigned int index; > struct v4l2_subdev *sd; > struct fwnode_handle *fwnode; > + struct regulator *regulator; > }; > > struct max9286_asd { > @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv) > return ret; > } > > +static int max9286_poc_power_on(struct max9286_priv *priv) > +{ > + struct max9286_source *source; > + unsigned int enabled = 0; > + int ret; > + > + /* Enable the global regulator if available. */ > + if (priv->regulator) > + return regulator_enable(priv->regulator); > + > + /* Otherwise use the per-port regulators. */ > + for_each_source(priv, source) { > + ret = regulator_enable(source->regulator); > + if (ret < 0) > + goto error; > + > + enabled |= BIT(source->index); > + } > + > + return 0; > + > +error: > + for_each_source(priv, source) { > + if (enabled & BIT(source->index)) > + regulator_disable(source->regulator); > + } > + > + return ret; > +} > + > +static void max9286_poc_power_off(struct max9286_priv *priv) > +{ > + struct max9286_source *source; > + > + if (priv->regulator) { > + regulator_disable(priv->regulator); > + return; > + } > + > + for_each_source(priv, source) > + regulator_disable(source->regulator); > +} > + > static int max9286_init(struct device *dev) > { > struct max9286_priv *priv; > @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev) > priv = i2c_get_clientdata(client); > > /* Enable the bus power. */ > - ret = regulator_enable(priv->regulator); > + ret = max9286_poc_power_on(priv); > if (ret < 0) { > - dev_err(&client->dev, "Unable to turn PoC on\n"); > + dev_err(dev, "Unable to turn PoC on\n"); > return ret; > } > > @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev) > err_v4l2_register: > max9286_v4l2_unregister(priv); > err_regulator: > - regulator_disable(priv->regulator); > + max9286_poc_power_off(priv); > > return ret; > } > @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv) > } > > source = &priv->sources[ep.port]; > + source->index = ep.port; > source->fwnode = fwnode_graph_get_remote_endpoint( > of_fwnode_handle(node)); > if (!source->fwnode) { > @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv) > return 0; > } > > +static int max9286_get_poc_supplies(struct max9286_priv *priv) > +{ > + struct device *dev = &priv->client->dev; > + struct max9286_source *source; > + > + /* > + * Start by getting the global regulator. Usage of the exclusive API is > + * required to receive an error in case the supply isn't specified in > + * the device tree. > + */ > + priv->regulator = devm_regulator_get_exclusive(dev, "poc"); > + if (!IS_ERR(priv->regulator)) > + return 0; > + > + if (PTR_ERR(priv->regulator) != -ENODEV) { > + if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) Use of the dev_err_probe() intoduced by a787e5400a1ceeb0ef92d71ec43aeb35b1fa1334 would save you from open-coding this Thanks j > + dev_err(dev, "Unable to get PoC regulator: %ld\n", > + PTR_ERR(priv->regulator)); > + return PTR_ERR(priv->regulator); > + } > + > + /* If there's no global regulator, get per-port regulators. */ > + dev_dbg(dev, > + "No global PoC regulator, looking for per-port regulators\n"); > + priv->regulator = NULL; > + > + for_each_source(priv, source) { > + char name[10]; > + > + snprintf(name, sizeof(name), "port%u-poc", source->index); > + source->regulator = devm_regulator_get_exclusive(dev, name); > + if (IS_ERR(source->regulator)) { > + if (PTR_ERR(source->regulator) != -EPROBE_DEFER) > + dev_err(dev, > + "Unable to get port %u PoC regulator: %ld\n", > + source->index, > + PTR_ERR(source->regulator)); > + return PTR_ERR(source->regulator); > + } > + } > + > + return 0; > +} > + > static int max9286_probe(struct i2c_client *client) > { > struct max9286_priv *priv; > @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client) > if (ret) > goto err_powerdown; > > - priv->regulator = devm_regulator_get(&client->dev, "poc"); > - if (IS_ERR(priv->regulator)) { > - if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) > - dev_err(&client->dev, > - "Unable to get PoC regulator (%ld)\n", > - PTR_ERR(priv->regulator)); > - ret = PTR_ERR(priv->regulator); > - goto err_powerdown; > - } > - > ret = max9286_parse_dt(priv); > + if (ret) > + goto err_cleanup_dt; > + > + ret = max9286_get_poc_supplies(priv); > if (ret) > goto err_powerdown; > > @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client) > > max9286_v4l2_unregister(priv); > > - regulator_disable(priv->regulator); > + max9286_poc_power_off(priv); > > gpiod_set_value_cansleep(priv->gpiod_pwdn, 0); > > -- > Regards, > > Laurent Pinchart >
Hi Jacopo, On Fri, Dec 17, 2021 at 12:08:08PM +0100, Jacopo Mondi wrote: > On Fri, Dec 17, 2021 at 12:09:45AM +0200, Laurent Pinchart wrote: > > From: Thomas Nizan <tnizan@witekio.com> > > > > Allow users to use one PoC regulator per port, instead of a global > > regulator. > > > > The properties '^port[0-3]-poc-supply$' in the DT node are used to > > indicate the regulators for individual ports. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > These patches will badly conflic with the gpio-poc series :( I don't mind rebasing. > > --- > > drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++----- > > 1 file changed, 98 insertions(+), 14 deletions(-) > > > > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c > > index 7c663fd587bb..fa2f6a823fe6 100644 > > --- a/drivers/media/i2c/max9286.c > > +++ b/drivers/media/i2c/max9286.c > > @@ -136,8 +136,10 @@ > > #define MAX9286_SRC_PAD 4 > > > > struct max9286_source { > > + unsigned int index; > > Can't you use the to_index() macro ? I think I can, indeed. > > struct v4l2_subdev *sd; > > struct fwnode_handle *fwnode; > > + struct regulator *regulator; > > }; > > > > struct max9286_asd { > > @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv) > > return ret; > > } > > > > +static int max9286_poc_power_on(struct max9286_priv *priv) > > +{ > > + struct max9286_source *source; > > + unsigned int enabled = 0; > > + int ret; > > + > > + /* Enable the global regulator if available. */ > > + if (priv->regulator) > > + return regulator_enable(priv->regulator); > > + > > + /* Otherwise use the per-port regulators. */ > > + for_each_source(priv, source) { > > + ret = regulator_enable(source->regulator); > > + if (ret < 0) > > + goto error; > > + > > + enabled |= BIT(source->index); > > + } > > + > > + return 0; > > + > > +error: > > + for_each_source(priv, source) { > > + if (enabled & BIT(source->index)) > > + regulator_disable(source->regulator); > > I would if a regulator can be unconditionally disabled... They're reference-counted, so they should only be disabled here if they have been enabled above. > > + } > > + > > + return ret; > > +} > > + > > +static void max9286_poc_power_off(struct max9286_priv *priv) > > +{ > > + struct max9286_source *source; > > + > > + if (priv->regulator) { > > + regulator_disable(priv->regulator); > > + return; > > + } > > + > > + for_each_source(priv, source) > > + regulator_disable(source->regulator); > > +} > > + > > static int max9286_init(struct device *dev) > > { > > struct max9286_priv *priv; > > @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev) > > priv = i2c_get_clientdata(client); > > > > /* Enable the bus power. */ > > - ret = regulator_enable(priv->regulator); > > + ret = max9286_poc_power_on(priv); > > if (ret < 0) { > > - dev_err(&client->dev, "Unable to turn PoC on\n"); > > + dev_err(dev, "Unable to turn PoC on\n"); > > return ret; > > } > > > > @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev) > > err_v4l2_register: > > max9286_v4l2_unregister(priv); > > err_regulator: > > - regulator_disable(priv->regulator); > > + max9286_poc_power_off(priv); > > > > return ret; > > } > > @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv) > > } > > > > source = &priv->sources[ep.port]; > > + source->index = ep.port; > > source->fwnode = fwnode_graph_get_remote_endpoint( > > of_fwnode_handle(node)); > > if (!source->fwnode) { > > @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv) > > return 0; > > } > > > > +static int max9286_get_poc_supplies(struct max9286_priv *priv) > > +{ > > + struct device *dev = &priv->client->dev; > > + struct max9286_source *source; > > + > > + /* > > + * Start by getting the global regulator. Usage of the exclusive API is > > + * required to receive an error in case the supply isn't specified in > > + * the device tree. > > + */ > > + priv->regulator = devm_regulator_get_exclusive(dev, "poc"); > > doesn't get_optional() return -ENODEV if there's no such regulator too > without locking the usage of the regulator ? Oh wait, maybe we want > exclusive locking ? :) No, you're right, I'll use an optional get. > > + if (!IS_ERR(priv->regulator)) > > + return 0; > > + > > + if (PTR_ERR(priv->regulator) != -ENODEV) { > > + if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) > > + dev_err(dev, "Unable to get PoC regulator: %ld\n", > > + PTR_ERR(priv->regulator)); > > + return PTR_ERR(priv->regulator); > > + } > > + > > + /* If there's no global regulator, get per-port regulators. */ > > + dev_dbg(dev, > > + "No global PoC regulator, looking for per-port regulators\n"); > > + priv->regulator = NULL; > > + > > + for_each_source(priv, source) { > > + char name[10]; > > + > > + snprintf(name, sizeof(name), "port%u-poc", source->index); > > + source->regulator = devm_regulator_get_exclusive(dev, name); > > I guess the fact we don't have a fixed number of sources makes it even > harder to use the _bulk version of the regulators API... Yes, and that fact that we may at some point want to power cameras up/down individually. > > + if (IS_ERR(source->regulator)) { > > + if (PTR_ERR(source->regulator) != -EPROBE_DEFER) > > + dev_err(dev, > > + "Unable to get port %u PoC regulator: %ld\n", > > + source->index, > > + PTR_ERR(source->regulator)); > > + return PTR_ERR(source->regulator); > > + } > > + } > > + > > + return 0; > > +} > > + > > static int max9286_probe(struct i2c_client *client) > > { > > struct max9286_priv *priv; > > @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client) > > if (ret) > > goto err_powerdown; > > > > - priv->regulator = devm_regulator_get(&client->dev, "poc"); > > - if (IS_ERR(priv->regulator)) { > > - if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) > > - dev_err(&client->dev, > > - "Unable to get PoC regulator (%ld)\n", > > - PTR_ERR(priv->regulator)); > > - ret = PTR_ERR(priv->regulator); > > - goto err_powerdown; > > - } > > - > > ret = max9286_parse_dt(priv); > > + if (ret) > > + goto err_cleanup_dt; > > + > > + ret = max9286_get_poc_supplies(priv); > > if (ret) > > goto err_powerdown; > > I think the error path is wrong, you should cleanup_dt here. Oops. > > @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client) > > > > max9286_v4l2_unregister(priv); > > > > - regulator_disable(priv->regulator); > > + max9286_poc_power_off(priv); > > > > gpiod_set_value_cansleep(priv->gpiod_pwdn, 0); > >
Hi Laurent, On 2021-12-16 11:09 p.m., Laurent Pinchart wrote: > From: Thomas Nizan <tnizan@witekio.com> > > Allow users to use one PoC regulator per port, instead of a global > regulator. > > The properties '^port[0-3]-poc-supply$' in the DT node are used to > indicate the regulators for individual ports. > Signed-off-by: Thomas Nizan <tnizan@witekio.com> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++----- > 1 file changed, 98 insertions(+), 14 deletions(-) > > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c > index 7c663fd587bb..fa2f6a823fe6 100644 > --- a/drivers/media/i2c/max9286.c > +++ b/drivers/media/i2c/max9286.c > @@ -136,8 +136,10 @@ > #define MAX9286_SRC_PAD 4 > > struct max9286_source { > + unsigned int index; > struct v4l2_subdev *sd; > struct fwnode_handle *fwnode; > + struct regulator *regulator; > }; > > struct max9286_asd { > @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv) > return ret; > } > > +static int max9286_poc_power_on(struct max9286_priv *priv) > +{ > + struct max9286_source *source; > + unsigned int enabled = 0; > + int ret; > + > + /* Enable the global regulator if available. */ > + if (priv->regulator) > + return regulator_enable(priv->regulator); > + > + /* Otherwise use the per-port regulators. */ > + for_each_source(priv, source) { > + ret = regulator_enable(source->regulator); > + if (ret < 0) > + goto error; > + > + enabled |= BIT(source->index); > + } > + > + return 0; > + > +error: > + for_each_source(priv, source) { > + if (enabled & BIT(source->index)) > + regulator_disable(source->regulator); > + } > + > + return ret; > +} > + > +static void max9286_poc_power_off(struct max9286_priv *priv) > +{ > + struct max9286_source *source; > + > + if (priv->regulator) { > + regulator_disable(priv->regulator); > + return; > + } > + > + for_each_source(priv, source) > + regulator_disable(source->regulator); > +} > + > static int max9286_init(struct device *dev) > { > struct max9286_priv *priv; > @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev) > priv = i2c_get_clientdata(client); > > /* Enable the bus power. */ > - ret = regulator_enable(priv->regulator); > + ret = max9286_poc_power_on(priv); > if (ret < 0) { > - dev_err(&client->dev, "Unable to turn PoC on\n"); > + dev_err(dev, "Unable to turn PoC on\n"); > return ret; > } > > @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev) > err_v4l2_register: > max9286_v4l2_unregister(priv); > err_regulator: > - regulator_disable(priv->regulator); > + max9286_poc_power_off(priv); > > return ret; > } > @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv) > } > > source = &priv->sources[ep.port]; > + source->index = ep.port; > source->fwnode = fwnode_graph_get_remote_endpoint( > of_fwnode_handle(node)); > if (!source->fwnode) { > @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv) > return 0; > } > > +static int max9286_get_poc_supplies(struct max9286_priv *priv) > +{ > + struct device *dev = &priv->client->dev; > + struct max9286_source *source; > + > + /* > + * Start by getting the global regulator. Usage of the exclusive API is > + * required to receive an error in case the supply isn't specified in > + * the device tree. > + */ > + priv->regulator = devm_regulator_get_exclusive(dev, "poc"); > + if (!IS_ERR(priv->regulator)) > + return 0; > + > + if (PTR_ERR(priv->regulator) != -ENODEV) { > + if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) > + dev_err(dev, "Unable to get PoC regulator: %ld\n", > + PTR_ERR(priv->regulator)); > + return PTR_ERR(priv->regulator); > + } > + > + /* If there's no global regulator, get per-port regulators. */ > + dev_dbg(dev, > + "No global PoC regulator, looking for per-port regulators\n"); > + priv->regulator = NULL; > + > + for_each_source(priv, source) { > + char name[10]; > + > + snprintf(name, sizeof(name), "port%u-poc", source->index); > + source->regulator = devm_regulator_get_exclusive(dev, name); > + if (IS_ERR(source->regulator)) { > + if (PTR_ERR(source->regulator) != -EPROBE_DEFER) > + dev_err(dev, > + "Unable to get port %u PoC regulator: %ld\n", > + source->index, > + PTR_ERR(source->regulator)); > + return PTR_ERR(source->regulator); > + } > + } > + > + return 0; > +} > + > static int max9286_probe(struct i2c_client *client) > { > struct max9286_priv *priv; > @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client) > if (ret) > goto err_powerdown; > > - priv->regulator = devm_regulator_get(&client->dev, "poc"); > - if (IS_ERR(priv->regulator)) { > - if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) > - dev_err(&client->dev, > - "Unable to get PoC regulator (%ld)\n", > - PTR_ERR(priv->regulator)); > - ret = PTR_ERR(priv->regulator); > - goto err_powerdown; > - } > - > ret = max9286_parse_dt(priv); > + if (ret) > + goto err_cleanup_dt; > + > + ret = max9286_get_poc_supplies(priv); > if (ret) > goto err_powerdown; > > @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client) > > max9286_v4l2_unregister(priv); > > - regulator_disable(priv->regulator); > + max9286_poc_power_off(priv); > > gpiod_set_value_cansleep(priv->gpiod_pwdn, 0); > > Regards, Thomas
Hi Thomas, On Mon, Dec 20, 2021 at 04:06:26PM +0100, Thomas Nizan wrote: > On 2021-12-16 11:09 p.m., Laurent Pinchart wrote: > > From: Thomas Nizan <tnizan@witekio.com> > > > > Allow users to use one PoC regulator per port, instead of a global > > regulator. > > > > The properties '^port[0-3]-poc-supply$' in the DT node are used to > > indicate the regulators for individual ports. > > Signed-off-by: Thomas Nizan <tnizan@witekio.com> Thank you. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > --- > > drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++----- > > 1 file changed, 98 insertions(+), 14 deletions(-) > > > > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c > > index 7c663fd587bb..fa2f6a823fe6 100644 > > --- a/drivers/media/i2c/max9286.c > > +++ b/drivers/media/i2c/max9286.c > > @@ -136,8 +136,10 @@ > > #define MAX9286_SRC_PAD 4 > > > > struct max9286_source { > > + unsigned int index; > > struct v4l2_subdev *sd; > > struct fwnode_handle *fwnode; > > + struct regulator *regulator; > > }; > > > > struct max9286_asd { > > @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv) > > return ret; > > } > > > > +static int max9286_poc_power_on(struct max9286_priv *priv) > > +{ > > + struct max9286_source *source; > > + unsigned int enabled = 0; > > + int ret; > > + > > + /* Enable the global regulator if available. */ > > + if (priv->regulator) > > + return regulator_enable(priv->regulator); > > + > > + /* Otherwise use the per-port regulators. */ > > + for_each_source(priv, source) { > > + ret = regulator_enable(source->regulator); > > + if (ret < 0) > > + goto error; > > + > > + enabled |= BIT(source->index); > > + } > > + > > + return 0; > > + > > +error: > > + for_each_source(priv, source) { > > + if (enabled & BIT(source->index)) > > + regulator_disable(source->regulator); > > + } > > + > > + return ret; > > +} > > + > > +static void max9286_poc_power_off(struct max9286_priv *priv) > > +{ > > + struct max9286_source *source; > > + > > + if (priv->regulator) { > > + regulator_disable(priv->regulator); > > + return; > > + } > > + > > + for_each_source(priv, source) > > + regulator_disable(source->regulator); > > +} > > + > > static int max9286_init(struct device *dev) > > { > > struct max9286_priv *priv; > > @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev) > > priv = i2c_get_clientdata(client); > > > > /* Enable the bus power. */ > > - ret = regulator_enable(priv->regulator); > > + ret = max9286_poc_power_on(priv); > > if (ret < 0) { > > - dev_err(&client->dev, "Unable to turn PoC on\n"); > > + dev_err(dev, "Unable to turn PoC on\n"); > > return ret; > > } > > > > @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev) > > err_v4l2_register: > > max9286_v4l2_unregister(priv); > > err_regulator: > > - regulator_disable(priv->regulator); > > + max9286_poc_power_off(priv); > > > > return ret; > > } > > @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv) > > } > > > > source = &priv->sources[ep.port]; > > + source->index = ep.port; > > source->fwnode = fwnode_graph_get_remote_endpoint( > > of_fwnode_handle(node)); > > if (!source->fwnode) { > > @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv) > > return 0; > > } > > > > +static int max9286_get_poc_supplies(struct max9286_priv *priv) > > +{ > > + struct device *dev = &priv->client->dev; > > + struct max9286_source *source; > > + > > + /* > > + * Start by getting the global regulator. Usage of the exclusive API is > > + * required to receive an error in case the supply isn't specified in > > + * the device tree. > > + */ > > + priv->regulator = devm_regulator_get_exclusive(dev, "poc"); > > + if (!IS_ERR(priv->regulator)) > > + return 0; > > + > > + if (PTR_ERR(priv->regulator) != -ENODEV) { > > + if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) > > + dev_err(dev, "Unable to get PoC regulator: %ld\n", > > + PTR_ERR(priv->regulator)); > > + return PTR_ERR(priv->regulator); > > + } > > + > > + /* If there's no global regulator, get per-port regulators. */ > > + dev_dbg(dev, > > + "No global PoC regulator, looking for per-port regulators\n"); > > + priv->regulator = NULL; > > + > > + for_each_source(priv, source) { > > + char name[10]; > > + > > + snprintf(name, sizeof(name), "port%u-poc", source->index); > > + source->regulator = devm_regulator_get_exclusive(dev, name); > > + if (IS_ERR(source->regulator)) { > > + if (PTR_ERR(source->regulator) != -EPROBE_DEFER) > > + dev_err(dev, > > + "Unable to get port %u PoC regulator: %ld\n", > > + source->index, > > + PTR_ERR(source->regulator)); > > + return PTR_ERR(source->regulator); > > + } > > + } > > + > > + return 0; > > +} > > + > > static int max9286_probe(struct i2c_client *client) > > { > > struct max9286_priv *priv; > > @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client) > > if (ret) > > goto err_powerdown; > > > > - priv->regulator = devm_regulator_get(&client->dev, "poc"); > > - if (IS_ERR(priv->regulator)) { > > - if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) > > - dev_err(&client->dev, > > - "Unable to get PoC regulator (%ld)\n", > > - PTR_ERR(priv->regulator)); > > - ret = PTR_ERR(priv->regulator); > > - goto err_powerdown; > > - } > > - > > ret = max9286_parse_dt(priv); > > + if (ret) > > + goto err_cleanup_dt; > > + > > + ret = max9286_get_poc_supplies(priv); > > if (ret) > > goto err_powerdown; > > > > @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client) > > > > max9286_v4l2_unregister(priv); > > > > - regulator_disable(priv->regulator); > > + max9286_poc_power_off(priv); > > > > gpiod_set_value_cansleep(priv->gpiod_pwdn, 0); > >
diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c index 7c663fd587bb..fa2f6a823fe6 100644 --- a/drivers/media/i2c/max9286.c +++ b/drivers/media/i2c/max9286.c @@ -136,8 +136,10 @@ #define MAX9286_SRC_PAD 4 struct max9286_source { + unsigned int index; struct v4l2_subdev *sd; struct fwnode_handle *fwnode; + struct regulator *regulator; }; struct max9286_asd { @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv) return ret; } +static int max9286_poc_power_on(struct max9286_priv *priv) +{ + struct max9286_source *source; + unsigned int enabled = 0; + int ret; + + /* Enable the global regulator if available. */ + if (priv->regulator) + return regulator_enable(priv->regulator); + + /* Otherwise use the per-port regulators. */ + for_each_source(priv, source) { + ret = regulator_enable(source->regulator); + if (ret < 0) + goto error; + + enabled |= BIT(source->index); + } + + return 0; + +error: + for_each_source(priv, source) { + if (enabled & BIT(source->index)) + regulator_disable(source->regulator); + } + + return ret; +} + +static void max9286_poc_power_off(struct max9286_priv *priv) +{ + struct max9286_source *source; + + if (priv->regulator) { + regulator_disable(priv->regulator); + return; + } + + for_each_source(priv, source) + regulator_disable(source->regulator); +} + static int max9286_init(struct device *dev) { struct max9286_priv *priv; @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev) priv = i2c_get_clientdata(client); /* Enable the bus power. */ - ret = regulator_enable(priv->regulator); + ret = max9286_poc_power_on(priv); if (ret < 0) { - dev_err(&client->dev, "Unable to turn PoC on\n"); + dev_err(dev, "Unable to turn PoC on\n"); return ret; } @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev) err_v4l2_register: max9286_v4l2_unregister(priv); err_regulator: - regulator_disable(priv->regulator); + max9286_poc_power_off(priv); return ret; } @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv) } source = &priv->sources[ep.port]; + source->index = ep.port; source->fwnode = fwnode_graph_get_remote_endpoint( of_fwnode_handle(node)); if (!source->fwnode) { @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv) return 0; } +static int max9286_get_poc_supplies(struct max9286_priv *priv) +{ + struct device *dev = &priv->client->dev; + struct max9286_source *source; + + /* + * Start by getting the global regulator. Usage of the exclusive API is + * required to receive an error in case the supply isn't specified in + * the device tree. + */ + priv->regulator = devm_regulator_get_exclusive(dev, "poc"); + if (!IS_ERR(priv->regulator)) + return 0; + + if (PTR_ERR(priv->regulator) != -ENODEV) { + if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) + dev_err(dev, "Unable to get PoC regulator: %ld\n", + PTR_ERR(priv->regulator)); + return PTR_ERR(priv->regulator); + } + + /* If there's no global regulator, get per-port regulators. */ + dev_dbg(dev, + "No global PoC regulator, looking for per-port regulators\n"); + priv->regulator = NULL; + + for_each_source(priv, source) { + char name[10]; + + snprintf(name, sizeof(name), "port%u-poc", source->index); + source->regulator = devm_regulator_get_exclusive(dev, name); + if (IS_ERR(source->regulator)) { + if (PTR_ERR(source->regulator) != -EPROBE_DEFER) + dev_err(dev, + "Unable to get port %u PoC regulator: %ld\n", + source->index, + PTR_ERR(source->regulator)); + return PTR_ERR(source->regulator); + } + } + + return 0; +} + static int max9286_probe(struct i2c_client *client) { struct max9286_priv *priv; @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client) if (ret) goto err_powerdown; - priv->regulator = devm_regulator_get(&client->dev, "poc"); - if (IS_ERR(priv->regulator)) { - if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) - dev_err(&client->dev, - "Unable to get PoC regulator (%ld)\n", - PTR_ERR(priv->regulator)); - ret = PTR_ERR(priv->regulator); - goto err_powerdown; - } - ret = max9286_parse_dt(priv); + if (ret) + goto err_cleanup_dt; + + ret = max9286_get_poc_supplies(priv); if (ret) goto err_powerdown; @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client) max9286_v4l2_unregister(priv); - regulator_disable(priv->regulator); + max9286_poc_power_off(priv); gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);