| Message ID | 20211226153624.162281-22-marcan@marcan.st |
|---|---|
| State | Superseded |
| Headers | show |
| Series | brcmfmac: Support Apple T2 and M1 platforms | expand |
On Sun, Dec 26, 2021 at 4:39 PM Hector Martin <marcan@marcan.st> wrote: > At least on BCM4387, the D11 cores are held in reset on cold startup and > firmware expects to release reset itself. Just assert reset here and let > firmware deassert it. Premature deassertion results in the firmware > failing to initialize properly some of the time, with strange AXI bus > errors. > > Also, BCM4387 has 3 cores, up from 2. The logic for handling that is in > brcmf_chip_ai_resetcore(), but since we aren't using that any more, just > handle it here. > > Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c index 73ab96968ac6..713546cebd5a 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c @@ -1289,15 +1289,18 @@ static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip) static inline void brcmf_chip_cr4_set_passive(struct brcmf_chip_priv *chip) { + int i; struct brcmf_core *core; brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4); - core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211); - brcmf_chip_resetcore(core, D11_BCMA_IOCTL_PHYRESET | - D11_BCMA_IOCTL_PHYCLOCKEN, - D11_BCMA_IOCTL_PHYCLOCKEN, - D11_BCMA_IOCTL_PHYCLOCKEN); + /* Disable the cores only and let the firmware enable them. + * Releasing reset ourselves breaks BCM4387 in weird ways. + */ + for (i = 0; (core = brcmf_chip_get_d11core(&chip->pub, i)); i++) + brcmf_chip_coredisable(core, D11_BCMA_IOCTL_PHYRESET | + D11_BCMA_IOCTL_PHYCLOCKEN, + D11_BCMA_IOCTL_PHYCLOCKEN); } static bool brcmf_chip_cr4_set_active(struct brcmf_chip_priv *chip, u32 rstvec)
At least on BCM4387, the D11 cores are held in reset on cold startup and firmware expects to release reset itself. Just assert reset here and let firmware deassert it. Premature deassertion results in the firmware failing to initialize properly some of the time, with strange AXI bus errors. Also, BCM4387 has 3 cores, up from 2. The logic for handling that is in brcmf_chip_ai_resetcore(), but since we aren't using that any more, just handle it here. Signed-off-by: Hector Martin <marcan@marcan.st> --- .../net/wireless/broadcom/brcm80211/brcmfmac/chip.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)