deleted file mode 100644
@@ -1,46 +0,0 @@
-SiRFstar-based GNSS Receiver DT binding
-
-SiRFstar chipsets are used in GNSS-receiver modules produced by several
-vendors and can use UART, SPI or I2C interfaces.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible : Must be one of
-
- "fastrax,uc430"
- "linx,r4"
- "wi2wi,w2sg0004"
- "wi2wi,w2sg0008i"
- "wi2wi,w2sg0084i"
-
-- vcc-supply : Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
-
-Required properties (I2C):
-- reg : I2C slave address
-
-Required properties (SPI):
-- reg : SPI chip select address
-
-Optional properties:
-
-- sirf,onoff-gpios : GPIO used to power on and off device (pin name: ON_OFF)
-- sirf,wakeup-gpios : GPIO used to determine device power state
- (pin name: RFPWRUP, WAKEUP)
-- timepulse-gpios : Time pulse GPIO (pin name: 1PPS, TM)
-
-Example:
-
-serial@1234 {
- compatible = "ns16550a";
-
- gnss {
- compatible = "wi2wi,w2sg0084i";
-
- vcc-supply = <&gnss_reg>;
- sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
- };
-};
new file mode 100644
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/sirfstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiRFstar GNSS Receiver Device Tree Bindings
+
+allOf:
+ - $ref: gnss-common.yaml#
+
+maintainers:
+ - Johan Hovold <johan@kernel.org>
+
+description:
+ The SiRFstar GNSS receivers have incarnated over the years in different
+ chips, starting from the SiRFstarIII which was a chip that was introduced in
+ 2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired
+ by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was
+ acquired by Samsung, while some products remained with CSR. In 2014 CSR
+ was acquired by Qualcomm who still sell some of the SiRF products.
+
+ SiRF chips can be used over UART, I2C or SPI buses.
+
+properties:
+ compatible:
+ enum:
+ - fastrax,uc430
+ - linx,r4
+ - wi2wi,w2sg0004
+ - wi2wi,w2sg0008i
+ - wi2wi,w2sg0084i
+
+ reg:
+ description:
+ The I2C Address, SPI chip select address. Not required on UART buses.
+
+ vcc-supply:
+ description:
+ Main voltage regulator, pin names such as 3V3_IN, VCC, VDD.
+
+ timepulse-gpios:
+ description: Comes with pin names such as 1PPS or TM
+
+ sirf,onoff-gpios:
+ maxItems: 1
+ description: GPIO used to power on and off device, pin name ON_OFF.
+
+ sirf,wakeup-gpios:
+ maxItems: 1
+ description: GPIO used to determine device power state, pin names such
+ as RFPWRUP, WAKEUP.
+
+ current-speed: true
+
+required:
+ - compatible
+ - vcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+ gnss {
+ compatible = "wi2wi,w2sg0084i";
+ vcc-supply = <&gnss_vcc_reg>;
+ sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ current-speed = <38400>;
+ };
+ };
This rewrites the SiRFstar DT bindings in YAML. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- .../devicetree/bindings/gnss/sirfstar.txt | 46 ------------ .../devicetree/bindings/gnss/sirfstar.yaml | 73 +++++++++++++++++++ 2 files changed, 73 insertions(+), 46 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gnss/sirfstar.txt create mode 100644 Documentation/devicetree/bindings/gnss/sirfstar.yaml