diff mbox series

[1/5] ARM: dts: Add clock-output-names for omap4

Message ID 20220204084339.12341-2-tony@atomide.com
State New
Headers show
Series Unify omap4/5 clocks with clock-output-names | expand

Commit Message

Tony Lindgren Feb. 4, 2022, 8:43 a.m. UTC 
To stop using the non-standard node name based clock naming, let's
first add the clock-output-names property. This allows us to stop using
the internal legacy clock naming and unify the naming for the TI SoCs in
the following patches.

Note that we must wait on fixing the node naming issues until after the
internal clock names have been updated to avoid adding name translation
unnecessarily.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap443x-clocks.dtsi |   1 +
 arch/arm/boot/dts/omap446x-clocks.dtsi |   2 +
 arch/arm/boot/dts/omap44xx-clocks.dtsi | 165 +++++++++++++++++++++++++
 3 files changed, 168 insertions(+)

Comments

Stephen Boyd March 11, 2022, 3:34 a.m. UTC | #1 
Quoting Tony Lindgren (2022-02-04 00:43:35)
> To stop using the non-standard node name based clock naming, let's
> first add the clock-output-names property. This allows us to stop using
> the internal legacy clock naming and unify the naming for the TI SoCs in
> the following patches.
> 
> Note that we must wait on fixing the node naming issues until after the
> internal clock names have been updated to avoid adding name translation
> unnecessarily.
> 
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Tero Kristo <kristo@kernel.org>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---

I assume I don't merge this through clk tree.

>  arch/arm/boot/dts/omap443x-clocks.dtsi |   1 +
>  arch/arm/boot/dts/omap446x-clocks.dtsi |   2 +
>  arch/arm/boot/dts/omap44xx-clocks.dtsi | 165 +++++++++++++++++++++++++
>  3 files changed, 168 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
> --- a/arch/arm/boot/dts/omap443x-clocks.dtsi
> +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
> @@ -8,6 +8,7 @@ &prm_clocks {
>         bandgap_fclk: bandgap_fclk@1888 {
>                 #clock-cells = <0>;
>                 compatible = "ti,gate-clock";
> +               clock-output-names = "bandgap_fclk";

At this point clock-output-names is basically a debug feature. It would
be better to use clocks property in consumer nodes and then use
clk_parent_data to link up the clk tree. Not sure if that matters here
though? I can understand the desire to have "usable" names vs. some
not very useful name be auto generated..

>                 clocks = <&sys_32k_ck>;
>                 ti,bit-shift = <8>;
>                 reg = <0x1888>;
Tony Lindgren March 12, 2022, 8:12 a.m. UTC | #2 
Hi,

* Stephen Boyd <sboyd@kernel.org> [220311 03:33]:
> Quoting Tony Lindgren (2022-02-04 00:43:35)
> > To stop using the non-standard node name based clock naming, let's
> > first add the clock-output-names property. This allows us to stop using
> > the internal legacy clock naming and unify the naming for the TI SoCs in
> > the following patches.
> > 
> > Note that we must wait on fixing the node naming issues until after the
> > internal clock names have been updated to avoid adding name translation
> > unnecessarily.
> > 
> > Cc: Stephen Boyd <sboyd@kernel.org>
> > Cc: Tero Kristo <kristo@kernel.org>
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > ---
> 
> I assume I don't merge this through clk tree.

AFAIK these won't conflict with other dts changes, so you could merge
them if you like and they look OK. Or we can also wait for v5.18-rc1 and
then I'll pick up the dts changes.

> >  arch/arm/boot/dts/omap443x-clocks.dtsi |   1 +
> >  arch/arm/boot/dts/omap446x-clocks.dtsi |   2 +
> >  arch/arm/boot/dts/omap44xx-clocks.dtsi | 165 +++++++++++++++++++++++++
> >  3 files changed, 168 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
> > --- a/arch/arm/boot/dts/omap443x-clocks.dtsi
> > +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
> > @@ -8,6 +8,7 @@ &prm_clocks {
> >         bandgap_fclk: bandgap_fclk@1888 {
> >                 #clock-cells = <0>;
> >                 compatible = "ti,gate-clock";
> > +               clock-output-names = "bandgap_fclk";
> 
> At this point clock-output-names is basically a debug feature. It would
> be better to use clocks property in consumer nodes and then use
> clk_parent_data to link up the clk tree. Not sure if that matters here
> though? I can understand the desire to have "usable" names vs. some
> not very useful name be auto generated..

Well the use case here is to be able to rename bandgap_fclk@1888 node to
use the standard clock node name like the patches I've posted for am3/4
and dra7 are doing.

We can't do that quite yet rename the non-standard clock nodes for omap4/5,
first the TI clock driver internal clock naming needs to be unified to
follow am3/4 and dra7 to avoid adding yet more name translation code. I'll
post patches for those changes after v5.18-rc1.

I agree relying on the clock-output-names is not ideal, but currently the
TI clocks are still structured to match clock nodes to the clock data
based on the name. I think only the TI clkctrl clock currently maps the
devicetree nodes to clock data based on the IO address currently.

Probably best to fix the warnings first before tackling any further
driver changes :)

The TI SoCs produce over 70k unique_unit_address warnings with make W=1
and over 30k node_name_chars_strict warnings with make W=2, these are
all mostly for clocks..

Regards,

Tony
Stephen Boyd March 15, 2022, 9:25 p.m. UTC | #3 
Quoting Tony Lindgren (2022-03-12 00:12:35)
> Hi,
> 
> * Stephen Boyd <sboyd@kernel.org> [220311 03:33]:
> > Quoting Tony Lindgren (2022-02-04 00:43:35)
> > > To stop using the non-standard node name based clock naming, let's
> > > first add the clock-output-names property. This allows us to stop using
> > > the internal legacy clock naming and unify the naming for the TI SoCs in
> > > the following patches.
> > > 
> > > Note that we must wait on fixing the node naming issues until after the
> > > internal clock names have been updated to avoid adding name translation
> > > unnecessarily.
> > > 
> > > Cc: Stephen Boyd <sboyd@kernel.org>
> > > Cc: Tero Kristo <kristo@kernel.org>
> > > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > > ---
> > 
> > I assume I don't merge this through clk tree.
> 
> AFAIK these won't conflict with other dts changes, so you could merge
> them if you like and they look OK. Or we can also wait for v5.18-rc1 and
> then I'll pick up the dts changes.

I'll let you take them through arm-soc.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
--- a/arch/arm/boot/dts/omap443x-clocks.dtsi
+++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
@@ -8,6 +8,7 @@  &prm_clocks {
 	bandgap_fclk: bandgap_fclk@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "bandgap_fclk";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1888>;
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi
--- a/arch/arm/boot/dts/omap446x-clocks.dtsi
+++ b/arch/arm/boot/dts/omap446x-clocks.dtsi
@@ -8,6 +8,7 @@  &prm_clocks {
 	div_ts_ck: div_ts_ck@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_ts_ck";
 		clocks = <&l4_wkup_clk_mux_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1888>;
@@ -17,6 +18,7 @@  div_ts_ck: div_ts_ck@1888 {
 	bandgap_ts_fclk: bandgap_ts_fclk@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "bandgap_ts_fclk";
 		clocks = <&div_ts_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1888>;
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -8,18 +8,21 @@  &cm1_clocks {
 	extalt_clkin_ck: extalt_clkin_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "extalt_clkin_ck";
 		clock-frequency = <59000000>;
 	};
 
 	pad_clks_src_ck: pad_clks_src_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pad_clks_src_ck";
 		clock-frequency = <12000000>;
 	};
 
 	pad_clks_ck: pad_clks_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "pad_clks_ck";
 		clocks = <&pad_clks_src_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0108>;
@@ -28,24 +31,28 @@  pad_clks_ck: pad_clks_ck@108 {
 	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pad_slimbus_core_clks_ck";
 		clock-frequency = <12000000>;
 	};
 
 	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "secure_32k_clk_src_ck";
 		clock-frequency = <32768>;
 	};
 
 	slimbus_src_clk: slimbus_src_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "slimbus_src_clk";
 		clock-frequency = <12000000>;
 	};
 
 	slimbus_clk: slimbus_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "slimbus_clk";
 		clocks = <&slimbus_src_clk>;
 		ti,bit-shift = <10>;
 		reg = <0x0108>;
@@ -54,84 +61,98 @@  slimbus_clk: slimbus_clk@108 {
 	sys_32k_ck: sys_32k_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_32k_ck";
 		clock-frequency = <32768>;
 	};
 
 	virt_12000000_ck: virt_12000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_12000000_ck";
 		clock-frequency = <12000000>;
 	};
 
 	virt_13000000_ck: virt_13000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_13000000_ck";
 		clock-frequency = <13000000>;
 	};
 
 	virt_16800000_ck: virt_16800000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_16800000_ck";
 		clock-frequency = <16800000>;
 	};
 
 	virt_19200000_ck: virt_19200000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
 	virt_26000000_ck: virt_26000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
 	virt_27000000_ck: virt_27000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_27000000_ck";
 		clock-frequency = <27000000>;
 	};
 
 	virt_38400000_ck: virt_38400000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_38400000_ck";
 		clock-frequency = <38400000>;
 	};
 
 	tie_low_clock_ck: tie_low_clock_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "tie_low_clock_ck";
 		clock-frequency = <0>;
 	};
 
 	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "utmi_phy_clkout_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60mhsp1_ck: xclk60mhsp1_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60mhsp1_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60mhsp2_ck: xclk60mhsp2_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60mhsp2_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60motg_ck: xclk60motg_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60motg_ck";
 		clock-frequency = <60000000>;
 	};
 
 	dpll_abe_ck: dpll_abe_ck@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
+		clock-output-names = "dpll_abe_ck";
 		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
 		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
 	};
@@ -139,6 +160,7 @@  dpll_abe_ck: dpll_abe_ck@1e0 {
 	dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_abe_x2_ck";
 		clocks = <&dpll_abe_ck>;
 		reg = <0x01f0>;
 	};
@@ -146,6 +168,7 @@  dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 {
 	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -157,6 +180,7 @@  dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
 	abe_24m_fclk: abe_24m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "abe_24m_fclk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
@@ -165,6 +189,7 @@  abe_24m_fclk: abe_24m_fclk {
 	abe_clk: abe_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_clk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x0108>;
@@ -175,6 +200,7 @@  abe_clk: abe_clk@108 {
 	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m3x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -186,6 +212,7 @@  dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
 	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "core_hsd_byp_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x012c>;
@@ -194,6 +221,7 @@  core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c {
 	dpll_core_ck: dpll_core_ck@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
@@ -201,12 +229,14 @@  dpll_core_ck: dpll_core_ck@120 {
 	dpll_core_x2_ck: dpll_core_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
 	dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m6x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -218,6 +248,7 @@  dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 {
 	dpll_core_m2_ck: dpll_core_m2_ck@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m2_ck";
 		clocks = <&dpll_core_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -229,6 +260,7 @@  dpll_core_m2_ck: dpll_core_m2_ck@130 {
 	ddrphy_ck: ddrphy_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "ddrphy_ck";
 		clocks = <&dpll_core_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -237,6 +269,7 @@  ddrphy_ck: ddrphy_ck {
 	dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m5x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -248,6 +281,7 @@  dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c {
 	div_core_ck: div_core_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_core_ck";
 		clocks = <&dpll_core_m5x2_ck>;
 		reg = <0x0100>;
 		ti,max-div = <2>;
@@ -256,6 +290,7 @@  div_core_ck: div_core_ck@100 {
 	div_iva_hs_clk: div_iva_hs_clk@1dc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_iva_hs_clk";
 		clocks = <&dpll_core_m5x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x01dc>;
@@ -265,6 +300,7 @@  div_iva_hs_clk: div_iva_hs_clk@1dc {
 	div_mpu_hs_clk: div_mpu_hs_clk@19c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_mpu_hs_clk";
 		clocks = <&dpll_core_m5x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x019c>;
@@ -274,6 +310,7 @@  div_mpu_hs_clk: div_mpu_hs_clk@19c {
 	dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m4x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -285,6 +322,7 @@  dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 {
 	dll_clk_div_ck: dll_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dll_clk_div_ck";
 		clocks = <&dpll_core_m4x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -293,6 +331,7 @@  dll_clk_div_ck: dll_clk_div_ck {
 	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2_ck";
 		clocks = <&dpll_abe_ck>;
 		ti,max-div = <31>;
 		reg = <0x01f0>;
@@ -302,6 +341,7 @@  dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
 	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "dpll_core_m3x2_gate_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0134>;
@@ -310,6 +350,7 @@  dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 {
 	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
+		clock-output-names = "dpll_core_m3x2_div_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0134>;
@@ -319,12 +360,14 @@  dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 {
 	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "dpll_core_m3x2_ck";
 		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
 	};
 
 	dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m7x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -336,6 +379,7 @@  dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 {
 	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "iva_hsd_byp_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
 		ti,bit-shift = <23>;
 		reg = <0x01ac>;
@@ -344,6 +388,7 @@  iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac {
 	dpll_iva_ck: dpll_iva_ck@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_iva_ck";
 		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 		assigned-clocks = <&dpll_iva_ck>;
@@ -353,12 +398,14 @@  dpll_iva_ck: dpll_iva_ck@1a0 {
 	dpll_iva_x2_ck: dpll_iva_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_iva_x2_ck";
 		clocks = <&dpll_iva_ck>;
 	};
 
 	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_m4x2_ck";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -372,6 +419,7 @@  dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 {
 	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_m5x2_ck";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -385,6 +433,7 @@  dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc {
 	dpll_mpu_ck: dpll_mpu_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
@@ -392,6 +441,7 @@  dpll_mpu_ck: dpll_mpu_ck@160 {
 	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -403,6 +453,7 @@  dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
 	per_hs_clk_div_ck: per_hs_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_hs_clk_div_ck";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -411,6 +462,7 @@  per_hs_clk_div_ck: per_hs_clk_div_ck {
 	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "usb_hs_clk_div_ck";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <3>;
@@ -419,6 +471,7 @@  usb_hs_clk_div_ck: usb_hs_clk_div_ck {
 	l3_div_ck: l3_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3_div_ck";
 		clocks = <&div_core_ck>;
 		ti,bit-shift = <4>;
 		ti,max-div = <2>;
@@ -428,6 +481,7 @@  l3_div_ck: l3_div_ck@100 {
 	l4_div_ck: l4_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l4_div_ck";
 		clocks = <&l3_div_ck>;
 		ti,bit-shift = <8>;
 		ti,max-div = <2>;
@@ -437,6 +491,7 @@  l4_div_ck: l4_div_ck@100 {
 	lp_clk_div_ck: lp_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "lp_clk_div_ck";
 		clocks = <&dpll_abe_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
@@ -445,6 +500,7 @@  lp_clk_div_ck: lp_clk_div_ck {
 	mpu_periphclk: mpu_periphclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_periphclk";
 		clocks = <&dpll_mpu_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -453,6 +509,7 @@  mpu_periphclk: mpu_periphclk {
 	ocp_abe_iclk: ocp_abe_iclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "ocp_abe_iclk";
 		clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>;
 		ti,bit-shift = <24>;
 		reg = <0x0528>;
@@ -462,6 +519,7 @@  ocp_abe_iclk: ocp_abe_iclk@528 {
 	per_abe_24m_fclk: per_abe_24m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_abe_24m_fclk";
 		clocks = <&dpll_abe_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -470,6 +528,7 @@  per_abe_24m_fclk: per_abe_24m_fclk {
 	dummy_ck: dummy_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "dummy_ck";
 		clock-frequency = <0>;
 	};
 };
@@ -478,6 +537,7 @@  &prm_clocks {
 	sys_clkin_ck: sys_clkin_ck@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin_ck";
 		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
 		reg = <0x0110>;
 		ti,index-starts-at-one;
@@ -486,6 +546,7 @@  sys_clkin_ck: sys_clkin_ck@110 {
 	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_bypass_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x0108>;
@@ -494,6 +555,7 @@  abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 {
 	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_refclk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
 		reg = <0x010c>;
 	};
@@ -501,6 +563,7 @@  abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c {
 	dbgclk_mux_ck: dbgclk_mux_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dbgclk_mux_ck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -509,6 +572,7 @@  dbgclk_mux_ck: dbgclk_mux_ck {
 	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "l4_wkup_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
 		reg = <0x0108>;
 	};
@@ -516,6 +580,7 @@  l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 {
 	syc_clk_div_ck: syc_clk_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "syc_clk_div_ck";
 		clocks = <&sys_clkin_ck>;
 		reg = <0x0100>;
 		ti,max-div = <2>;
@@ -524,6 +589,7 @@  syc_clk_div_ck: syc_clk_div_ck@100 {
 	usim_ck: usim_ck@1858 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "usim_ck";
 		clocks = <&dpll_per_m4x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1858>;
@@ -533,6 +599,7 @@  usim_ck: usim_ck@1858 {
 	usim_fclk: usim_fclk@1858 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usim_fclk";
 		clocks = <&usim_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1858>;
@@ -541,6 +608,7 @@  usim_fclk: usim_fclk@1858 {
 	trace_clk_div_ck: trace_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "ti,clkdm-gate-clock";
+		clock-output-names = "trace_clk_div_ck";
 		clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>;
 	};
 };
@@ -548,6 +616,7 @@  trace_clk_div_ck: trace_clk_div_ck {
 &prm_clockdomains {
 	emu_sys_clkdm: emu_sys_clkdm {
 		compatible = "ti,clockdomain";
+		clock-output-names = "emu_sys_clkdm";
 		clocks = <&trace_clk_div_ck>;
 	};
 };
@@ -556,6 +625,7 @@  &cm2_clocks {
 	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "per_hsd_byp_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x014c>;
@@ -564,6 +634,7 @@  per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c {
 	dpll_per_ck: dpll_per_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
@@ -571,6 +642,7 @@  dpll_per_ck: dpll_per_ck@140 {
 	dpll_per_m2_ck: dpll_per_m2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		reg = <0x0150>;
@@ -580,6 +652,7 @@  dpll_per_m2_ck: dpll_per_m2_ck@150 {
 	dpll_per_x2_ck: dpll_per_x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_per_x2_ck";
 		clocks = <&dpll_per_ck>;
 		reg = <0x0150>;
 	};
@@ -587,6 +660,7 @@  dpll_per_x2_ck: dpll_per_x2_ck@150 {
 	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -598,6 +672,7 @@  dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
 	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "dpll_per_m3x2_gate_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0154>;
@@ -606,6 +681,7 @@  dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 {
 	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
+		clock-output-names = "dpll_per_m3x2_div_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0154>;
@@ -615,12 +691,14 @@  dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 {
 	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "dpll_per_m3x2_ck";
 		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
 	};
 
 	dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m4x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -632,6 +710,7 @@  dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 {
 	dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m5x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -643,6 +722,7 @@  dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c {
 	dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m6x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -654,6 +734,7 @@  dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 {
 	dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m7x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -665,6 +746,7 @@  dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 {
 	dpll_usb_ck: dpll_usb_ck@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
+		clock-output-names = "dpll_usb_ck";
 		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
@@ -672,6 +754,7 @@  dpll_usb_ck: dpll_usb_ck@180 {
 	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
+		clock-output-names = "dpll_usb_clkdcoldo_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,clock-div = <1>;
 		ti,autoidle-shift = <8>;
@@ -683,6 +766,7 @@  dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 {
 	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_usb_m2_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -694,6 +778,7 @@  dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
 	ducati_clk_mux_ck: ducati_clk_mux_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "ducati_clk_mux_ck";
 		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
 		reg = <0x0100>;
 	};
@@ -701,6 +786,7 @@  ducati_clk_mux_ck: ducati_clk_mux_ck@100 {
 	func_12m_fclk: func_12m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
@@ -709,6 +795,7 @@  func_12m_fclk: func_12m_fclk {
 	func_24m_clk: func_24m_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -717,6 +804,7 @@  func_24m_clk: func_24m_clk {
 	func_24mc_fclk: func_24mc_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24mc_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
@@ -725,6 +813,7 @@  func_24mc_fclk: func_24mc_fclk {
 	func_48m_fclk: func_48m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "func_48m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		reg = <0x0108>;
 		ti,dividers = <4>, <8>;
@@ -733,6 +822,7 @@  func_48m_fclk: func_48m_fclk@108 {
 	func_48mc_fclk: func_48mc_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_48mc_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -741,6 +831,7 @@  func_48mc_fclk: func_48mc_fclk {
 	func_64m_fclk: func_64m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "func_64m_fclk";
 		clocks = <&dpll_per_m4x2_ck>;
 		reg = <0x0108>;
 		ti,dividers = <2>, <4>;
@@ -749,6 +840,7 @@  func_64m_fclk: func_64m_fclk@108 {
 	func_96m_fclk: func_96m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "func_96m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		reg = <0x0108>;
 		ti,dividers = <2>, <4>;
@@ -757,6 +849,7 @@  func_96m_fclk: func_96m_fclk@108 {
 	init_60m_fclk: init_60m_fclk@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "init_60m_fclk";
 		clocks = <&dpll_usb_m2_ck>;
 		reg = <0x0104>;
 		ti,dividers = <1>, <8>;
@@ -765,6 +858,7 @@  init_60m_fclk: init_60m_fclk@104 {
 	per_abe_nc_fclk: per_abe_nc_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "per_abe_nc_fclk";
 		clocks = <&dpll_abe_m2_ck>;
 		reg = <0x0108>;
 		ti,max-div = <2>;
@@ -773,6 +867,7 @@  per_abe_nc_fclk: per_abe_nc_fclk@108 {
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy_cm_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0640>;
@@ -782,6 +877,7 @@  usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 &cm2_clockdomains {
 	l3_init_clkdm: l3_init_clkdm {
 		compatible = "ti,clockdomain";
+		clock-output-names = "l3_init_clkdm";
 		clocks = <&dpll_usb_ck>;
 	};
 };
@@ -790,6 +886,7 @@  &scrm_clocks {
 	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk0_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0310>;
@@ -798,6 +895,7 @@  auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
 	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk0_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0310>;
@@ -806,12 +904,14 @@  auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
 	auxclk0_src_ck: auxclk0_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk0_src_ck";
 		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
 	};
 
 	auxclk0_ck: auxclk0_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk0_ck";
 		clocks = <&auxclk0_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -821,6 +921,7 @@  auxclk0_ck: auxclk0_ck@310 {
 	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk1_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0314>;
@@ -829,6 +930,7 @@  auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
 	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk1_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0314>;
@@ -837,12 +939,14 @@  auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
 	auxclk1_src_ck: auxclk1_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk1_src_ck";
 		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
 	};
 
 	auxclk1_ck: auxclk1_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk1_ck";
 		clocks = <&auxclk1_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -852,6 +956,7 @@  auxclk1_ck: auxclk1_ck@314 {
 	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk2_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0318>;
@@ -860,6 +965,7 @@  auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
 	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk2_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0318>;
@@ -868,12 +974,14 @@  auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
 	auxclk2_src_ck: auxclk2_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk2_src_ck";
 		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
 	};
 
 	auxclk2_ck: auxclk2_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk2_ck";
 		clocks = <&auxclk2_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -883,6 +991,7 @@  auxclk2_ck: auxclk2_ck@318 {
 	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk3_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x031c>;
@@ -891,6 +1000,7 @@  auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
 	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk3_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x031c>;
@@ -899,12 +1009,14 @@  auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
 	auxclk3_src_ck: auxclk3_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk3_src_ck";
 		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
 	};
 
 	auxclk3_ck: auxclk3_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk3_ck";
 		clocks = <&auxclk3_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -914,6 +1026,7 @@  auxclk3_ck: auxclk3_ck@31c {
 	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk4_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0320>;
@@ -922,6 +1035,7 @@  auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
 	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk4_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0320>;
@@ -930,12 +1044,14 @@  auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
 	auxclk4_src_ck: auxclk4_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk4_src_ck";
 		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
 	};
 
 	auxclk4_ck: auxclk4_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk4_ck";
 		clocks = <&auxclk4_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -945,6 +1061,7 @@  auxclk4_ck: auxclk4_ck@320 {
 	auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk5_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0324>;
@@ -953,6 +1070,7 @@  auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 {
 	auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk5_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0324>;
@@ -961,12 +1079,14 @@  auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 {
 	auxclk5_src_ck: auxclk5_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk5_src_ck";
 		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
 	};
 
 	auxclk5_ck: auxclk5_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk5_ck";
 		clocks = <&auxclk5_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -976,6 +1096,7 @@  auxclk5_ck: auxclk5_ck@324 {
 	auxclkreq0_ck: auxclkreq0_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq0_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0210>;
@@ -984,6 +1105,7 @@  auxclkreq0_ck: auxclkreq0_ck@210 {
 	auxclkreq1_ck: auxclkreq1_ck@214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq1_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0214>;
@@ -992,6 +1114,7 @@  auxclkreq1_ck: auxclkreq1_ck@214 {
 	auxclkreq2_ck: auxclkreq2_ck@218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq2_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0218>;
@@ -1000,6 +1123,7 @@  auxclkreq2_ck: auxclkreq2_ck@218 {
 	auxclkreq3_ck: auxclkreq3_ck@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq3_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x021c>;
@@ -1008,6 +1132,7 @@  auxclkreq3_ck: auxclkreq3_ck@21c {
 	auxclkreq4_ck: auxclkreq4_ck@220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq4_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0220>;
@@ -1016,6 +1141,7 @@  auxclkreq4_ck: auxclkreq4_ck@220 {
 	auxclkreq5_ck: auxclkreq5_ck@224 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq5_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0224>;
@@ -1025,6 +1151,7 @@  auxclkreq5_ck: auxclkreq5_ck@224 {
 &cm1 {
 	mpuss_cm: mpuss_cm@300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpuss_cm";
 		reg = <0x300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1032,6 +1159,7 @@  mpuss_cm: mpuss_cm@300 {
 
 		mpuss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpuss_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1039,6 +1167,7 @@  mpuss_clkctrl: clk@20 {
 
 	tesla_cm: tesla_cm@400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "tesla_cm";
 		reg = <0x400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1046,6 +1175,7 @@  tesla_cm: tesla_cm@400 {
 
 		tesla_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "tesla_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1053,6 +1183,7 @@  tesla_clkctrl: clk@20 {
 
 	abe_cm: abe_cm@500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "abe_cm";
 		reg = <0x500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1060,6 +1191,7 @@  abe_cm: abe_cm@500 {
 
 		abe_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "abe_clkctrl";
 			reg = <0x20 0x6c>;
 			#clock-cells = <2>;
 		};
@@ -1070,6 +1202,7 @@  abe_clkctrl: clk@20 {
 &cm2 {
 	l4_ao_cm: l4_ao_cm@600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_ao_cm";
 		reg = <0x600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1077,6 +1210,7 @@  l4_ao_cm: l4_ao_cm@600 {
 
 		l4_ao_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_ao_clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
@@ -1084,6 +1218,7 @@  l4_ao_clkctrl: clk@20 {
 
 	l3_1_cm: l3_1_cm@700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_1_cm";
 		reg = <0x700 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1091,6 +1226,7 @@  l3_1_cm: l3_1_cm@700 {
 
 		l3_1_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_1_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1098,6 +1234,7 @@  l3_1_clkctrl: clk@20 {
 
 	l3_2_cm: l3_2_cm@800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_2_cm";
 		reg = <0x800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1105,6 +1242,7 @@  l3_2_cm: l3_2_cm@800 {
 
 		l3_2_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_2_clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
@@ -1112,6 +1250,7 @@  l3_2_clkctrl: clk@20 {
 
 	ducati_cm: ducati_cm@900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ducati_cm";
 		reg = <0x900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1119,6 +1258,7 @@  ducati_cm: ducati_cm@900 {
 
 		ducati_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ducati_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1126,6 +1266,7 @@  ducati_clkctrl: clk@20 {
 
 	l3_dma_cm: l3_dma_cm@a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_dma_cm";
 		reg = <0xa00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1133,6 +1274,7 @@  l3_dma_cm: l3_dma_cm@a00 {
 
 		l3_dma_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_dma_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1140,6 +1282,7 @@  l3_dma_clkctrl: clk@20 {
 
 	l3_emif_cm: l3_emif_cm@b00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_emif_cm";
 		reg = <0xb00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1147,6 +1290,7 @@  l3_emif_cm: l3_emif_cm@b00 {
 
 		l3_emif_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_emif_clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
@@ -1154,6 +1298,7 @@  l3_emif_clkctrl: clk@20 {
 
 	d2d_cm: d2d_cm@c00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "d2d_cm";
 		reg = <0xc00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1161,6 +1306,7 @@  d2d_cm: d2d_cm@c00 {
 
 		d2d_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "d2d_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1168,6 +1314,7 @@  d2d_clkctrl: clk@20 {
 
 	l4_cfg_cm: l4_cfg_cm@d00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_cfg_cm";
 		reg = <0xd00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1175,6 +1322,7 @@  l4_cfg_cm: l4_cfg_cm@d00 {
 
 		l4_cfg_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_cfg_clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
@@ -1182,6 +1330,7 @@  l4_cfg_clkctrl: clk@20 {
 
 	l3_instr_cm: l3_instr_cm@e00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_instr_cm";
 		reg = <0xe00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1189,6 +1338,7 @@  l3_instr_cm: l3_instr_cm@e00 {
 
 		l3_instr_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_instr_clkctrl";
 			reg = <0x20 0x24>;
 			#clock-cells = <2>;
 		};
@@ -1196,6 +1346,7 @@  l3_instr_clkctrl: clk@20 {
 
 	ivahd_cm: ivahd_cm@f00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ivahd_cm";
 		reg = <0xf00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1203,6 +1354,7 @@  ivahd_cm: ivahd_cm@f00 {
 
 		ivahd_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ivahd_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
@@ -1210,6 +1362,7 @@  ivahd_clkctrl: clk@20 {
 
 	iss_cm: iss_cm@1000 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "iss_cm";
 		reg = <0x1000 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1217,6 +1370,7 @@  iss_cm: iss_cm@1000 {
 
 		iss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "iss_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
@@ -1224,6 +1378,7 @@  iss_clkctrl: clk@20 {
 
 	l3_dss_cm: l3_dss_cm@1100 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_dss_cm";
 		reg = <0x1100 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1231,6 +1386,7 @@  l3_dss_cm: l3_dss_cm@1100 {
 
 		l3_dss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_dss_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1238,6 +1394,7 @@  l3_dss_clkctrl: clk@20 {
 
 	l3_gfx_cm: l3_gfx_cm@1200 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_gfx_cm";
 		reg = <0x1200 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1245,6 +1402,7 @@  l3_gfx_cm: l3_gfx_cm@1200 {
 
 		l3_gfx_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_gfx_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1252,6 +1410,7 @@  l3_gfx_clkctrl: clk@20 {
 
 	l3_init_cm: l3_init_cm@1300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_init_cm";
 		reg = <0x1300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1259,6 +1418,7 @@  l3_init_cm: l3_init_cm@1300 {
 
 		l3_init_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_init_clkctrl";
 			reg = <0x20 0xc4>;
 			#clock-cells = <2>;
 		};
@@ -1266,6 +1426,7 @@  l3_init_clkctrl: clk@20 {
 
 	l4_per_cm: l4_per_cm@1400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_per_cm";
 		reg = <0x1400 0x200>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1288,6 +1449,7 @@  l4_secure_clkctrl: clock@1a0 {
 &prm {
 	l4_wkup_cm: l4_wkup_cm@1800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_wkup_cm";
 		reg = <0x1800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1295,6 +1457,7 @@  l4_wkup_cm: l4_wkup_cm@1800 {
 
 		l4_wkup_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_clkctrl";
 			reg = <0x20 0x5c>;
 			#clock-cells = <2>;
 		};
@@ -1302,6 +1465,7 @@  l4_wkup_clkctrl: clk@20 {
 
 	emu_sys_cm: emu_sys_cm@1a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "emu_sys_cm";
 		reg = <0x1a00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1309,6 +1473,7 @@  emu_sys_cm: emu_sys_cm@1a00 {
 
 		emu_sys_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "emu_sys_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};