[v10,4/7] pinctrl: qcom: Update lpi pin group structure

Update lpi group structure with core group_desc structure
to avoid redundant struct params.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
---
 drivers/pinctrl/qcom/Kconfig             |  1 +
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 44 +++++++++++++++-----------------
 2 files changed, 22 insertions(+), 23 deletions(-)

On 3/8/2022 11:25 PM, Bjorn Andersson wrote:
Thanks for Your Time Bjorn!!!
> On Tue 08 Mar 03:03 PST 2022, Srinivasa Rao Mandadapu wrote:
>
>> Update lpi group structure with core group_desc structure
>> to avoid redundant struct params.
>>
> This fails to express why you're doing that, please see below.
>
>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
>> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
>> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
>> ---
>>   drivers/pinctrl/qcom/Kconfig             |  1 +
>>   drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 44 +++++++++++++++-----------------
>>   2 files changed, 22 insertions(+), 23 deletions(-)
>>
>> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
>> index ca6f68a..31c4aa6 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -351,6 +351,7 @@ config PINCTRL_LPASS_LPI
>>   	select PINMUX
>>   	select PINCONF
>>   	select GENERIC_PINCONF
>> +	select GENERIC_PINCTRL_GROUPS
> This allow you to use struct group_desc, but what does that give you?
>
> I don't see a change where you're moving to use the common group_desc
> helpers that the framework supplies. Without that this just replace 3
> entries in struct lpi_pingroup with 4 entries in struct group_desc.
>
>
> Change looks good, iff it's followed by a transition to replace the
> driver's custom functions with pinctrl_generic_get_group_*().
>
> Regards,
> Bjorn
Okay. Will change and re send the patch set.
>
>>   	depends on GPIOLIB
>>   	help
>>   	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
>> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> index 3c15f80..54750ba 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> @@ -51,11 +51,11 @@
>>   
>>   #define LPI_PINGROUP(id, soff, f1, f2, f3, f4)		\
>>   	{						\
>> -		.name = "gpio" #id,			\
>> -		.pins = gpio##id##_pins,		\
>> +		.group.name = "gpio" #id,			\
>> +		.group.pins = gpio##id##_pins,		\
>>   		.pin = id,				\
>>   		.slew_offset = soff,			\
>> -		.npins = ARRAY_SIZE(gpio##id##_pins),	\
>> +		.group.num_pins = ARRAY_SIZE(gpio##id##_pins),	\
>>   		.funcs = (int[]){			\
>>   			LPI_MUX_gpio,			\
>>   			LPI_MUX_##f1,			\
>> @@ -67,9 +67,7 @@
>>   	}
>>   
>>   struct lpi_pingroup {
>> -	const char *name;
>> -	const unsigned int *pins;
>> -	unsigned int npins;
>> +	struct group_desc group;
>>   	unsigned int pin;
>>   	/* Bit offset in slew register for SoundWire pins only */
>>   	int slew_offset;
>> @@ -150,20 +148,20 @@ enum sm8250_lpi_functions {
>>   	LPI_MUX__,
>>   };
>>   
>> -static const unsigned int gpio0_pins[] = { 0 };
>> -static const unsigned int gpio1_pins[] = { 1 };
>> -static const unsigned int gpio2_pins[] = { 2 };
>> -static const unsigned int gpio3_pins[] = { 3 };
>> -static const unsigned int gpio4_pins[] = { 4 };
>> -static const unsigned int gpio5_pins[] = { 5 };
>> -static const unsigned int gpio6_pins[] = { 6 };
>> -static const unsigned int gpio7_pins[] = { 7 };
>> -static const unsigned int gpio8_pins[] = { 8 };
>> -static const unsigned int gpio9_pins[] = { 9 };
>> -static const unsigned int gpio10_pins[] = { 10 };
>> -static const unsigned int gpio11_pins[] = { 11 };
>> -static const unsigned int gpio12_pins[] = { 12 };
>> -static const unsigned int gpio13_pins[] = { 13 };
>> +static int gpio0_pins[] = { 0 };
>> +static int gpio1_pins[] = { 1 };
>> +static int gpio2_pins[] = { 2 };
>> +static int gpio3_pins[] = { 3 };
>> +static int gpio4_pins[] = { 4 };
>> +static int gpio5_pins[] = { 5 };
>> +static int gpio6_pins[] = { 6 };
>> +static int gpio7_pins[] = { 7 };
>> +static int gpio8_pins[] = { 8 };
>> +static int gpio9_pins[] = { 9 };
>> +static int gpio10_pins[] = { 10 };
>> +static int gpio11_pins[] = { 11 };
>> +static int gpio12_pins[] = { 12 };
>> +static int gpio13_pins[] = { 13 };
>>   static const char * const swr_tx_clk_groups[] = { "gpio0" };
>>   static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
>>   static const char * const swr_rx_clk_groups[] = { "gpio3" };
>> @@ -262,7 +260,7 @@ static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev,
>>   {
>>   	struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
>>   
>> -	return pctrl->data->groups[group].name;
>> +	return pctrl->data->groups[group].group.name;
>>   }
>>   
>>   static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev,
>> @@ -272,8 +270,8 @@ static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev,
>>   {
>>   	struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
>>   
>> -	*pins = pctrl->data->groups[group].pins;
>> -	*num_pins = pctrl->data->groups[group].npins;
>> +	*pins = pctrl->data->groups[group].group.pins;
>> +	*num_pins = pctrl->data->groups[group].group.num_pins;
>>   
>>   	return 0;
>>   }
>> -- 
>> 2.7.4
>>