| Message ID | 20220321012216.23724-1-rdunlap@infradead.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Docs: admin/kernel-parameters: edit a few boot options | expand |
Randy Dunlap <rdunlap@infradead.org> writes: > Clean up some of admin-guide/kernel-parameters.txt: > > a. "smt" should be "smt=" (S390) > b. add "smt-enabled" for POWERPC I'd rather you didn't. It's not well tested and we ignore it entirely on some platforms because it causes bugs. Eventually I'd like to remove it. If we ever get time we'd want to support the generic `nosmt` argument instead. cheers
On 3/21/22 17:45, Michael Ellerman wrote: > Randy Dunlap <rdunlap@infradead.org> writes: >> Clean up some of admin-guide/kernel-parameters.txt: >> >> a. "smt" should be "smt=" (S390) >> b. add "smt-enabled" for POWERPC > > I'd rather you didn't. It's not well tested and we ignore it entirely on > some platforms because it causes bugs. Eventually I'd like to remove it. > > If we ever get time we'd want to support the generic `nosmt` argument > instead. No problem. Thanks for replying.
On Mon, Mar 21, 2022 at 2:22 AM Randy Dunlap <rdunlap@infradead.org> wrote: > > Clean up some of admin-guide/kernel-parameters.txt: > > a. "smt" should be "smt=" (S390) > b. add "smt-enabled" for POWERPC > c. Sparc supports the vdso= boot option > d. make the tp_printk options (2) formatting similar to other options > by adding spacing > e. add "trace_clock=" with a reference to Documentation/trace/ftrace.rst > f. use [IA-64] as documented instead of [ia64] > g. fix formatting and text for test_suspend= This -> > h. fix formatting for swapaccount= > i. fix formatting and grammar for video.brightness_switch_enabled= -> and the last one are fine with me, but I suppose that there will be a v2? > Signed-off-by: Randy Dunlap <rdunlap@infradead.org> > Cc: Heiko Carstens <hca@linux.ibm.com> > Cc: Vasily Gorbik <gor@linux.ibm.com> > Cc: Alexander Gordeev <agordeev@linux.ibm.com> > Cc: Christian Borntraeger <borntraeger@linux.ibm.com> > Cc: Sven Schnelle <svens@linux.ibm.com> > Cc: linux-s390@vger.kernel.org > Cc: Steven Rostedt <rostedt@goodmis.org> > Cc: Ingo Molnar <mingo@redhat.com> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: sparclinux@vger.kernel.org > Cc: Michael Ellerman <mpe@ellerman.id.au> > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> > Cc: Paul Mackerras <paulus@samba.org> > Cc: linuxppc-dev@lists.ozlabs.org > Cc: linux-ia64@vger.kernel.org > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Len Brown <lenb@kernel.org> > Cc: linux-pm@vger.kernel.org > Cc: linux-acpi@vger.kernel.org > Cc: Johannes Weiner <hannes@cmpxchg.org> > Cc: Andrew Morton <akpm@linux-foundation.org> > Cc: Jonathan Corbet <corbet@lwn.net> > Cc: linux-doc@vger.kernel.org > --- > Documentation/admin-guide/kernel-parameters.txt | 33 +++++++++----- > 1 file changed, 22 insertions(+), 11 deletions(-) > > --- linux-next-20220318.orig/Documentation/admin-guide/kernel-parameters.txt > +++ linux-next-20220318/Documentation/admin-guide/kernel-parameters.txt > @@ -2814,7 +2814,7 @@ > different yeeloong laptops. > Example: machtype=lemote-yeeloong-2f-7inch > > - max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater > + max_addr=nn[KMG] [KNL,BOOT,IA-64] All physical memory greater > than or equal to this physical address is ignored. > > maxcpus= [SMP] Maximum number of processors that an SMP kernel > @@ -3057,7 +3057,7 @@ > > mga= [HW,DRM] > > - min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this > + min_addr=nn[KMG] [KNL,BOOT,IA-64] All physical memory below this > physical address is ignored. > > mini2440= [ARM,HW,KNL] > @@ -5382,13 +5382,19 @@ > 1: Fast pin select (default) > 2: ATC IRMode > > - smt [KNL,S390] Set the maximum number of threads (logical > + smt= [KNL,S390] Set the maximum number of threads (logical > CPUs) to use per physical CPU on systems capable of > symmetric multithreading (SMT). Will be capped to the > actual hardware limit. > Format: <integer> > Default: -1 (no limit) > > + smt-enabled= [PPC 64-bit] Enable SMT, disable SMT, or set the > + maximum number of threads. This can be used to override > + the Open Firmware (OF) option. > + Format: on | off | <integer> > + Default: all threads enabled > + > softlockup_panic= > [KNL] Should the soft-lockup detector generate panics. > Format: 0 | 1 > @@ -5768,8 +5774,9 @@ > This parameter controls use of the Protected > Execution Facility on pSeries. > > - swapaccount=[0|1] > - [KNL] Enable accounting of swap in memory resource > + swapaccount= [KNL] > + Format: [0|1] > + Enable accounting of swap in memory resource > controller if no parameter or 1 is given or disable > it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst) > > @@ -5815,7 +5822,8 @@ > > tdfx= [HW,DRM] > > - test_suspend= [SUSPEND][,N] > + test_suspend= [SUSPEND] > + Format: { "mem" | "standby" | "freeze" }[,N] > Specify "mem" (for Suspend-to-RAM) or "standby" (for > standby suspend) or "freeze" (for suspend type freeze) > as the system sleep state during system startup with > @@ -5902,6 +5910,8 @@ > trace_buf_size=nn[KMG] > [FTRACE] will set tracing buffer size on each cpu. > > + trace_clock= [FTRACE] See Documentation/trace/ftrace.rst > + > trace_event=[event-list] > [FTRACE] Set and start specified trace events in order > to facilitate early boot debugging. The event-list is a > @@ -5924,7 +5934,7 @@ > See also Documentation/trace/ftrace.rst "trace options" > section. > > - tp_printk[FTRACE] > + tp_printk [FTRACE] > Have the tracepoints sent to printk as well as the > tracing ring buffer. This is useful for early boot up > where the system hangs or reboots and does not give the > @@ -5946,7 +5956,7 @@ > frequency tracepoints such as irq or sched, can cause > the system to live lock. > > - tp_printk_stop_on_boot[FTRACE] > + tp_printk_stop_on_boot [FTRACE] > When tp_printk (above) is set, it can cause a lot of noise > on the console. It may be useful to only include the > printing of events during boot up, as user space may > @@ -6295,7 +6305,7 @@ > HIGHMEM regardless of setting > of CONFIG_HIGHPTE. > > - vdso= [X86,SH] > + vdso= [X86,SH,SPARC] > On X86_32, this is an alias for vdso32=. Otherwise: > > vdso=1: enable VDSO (the default) > @@ -6321,11 +6331,12 @@ > video= [FB] Frame buffer configuration > See Documentation/fb/modedb.rst. > > - video.brightness_switch_enabled= [0,1] > + video.brightness_switch_enabled= [ACPI] > + Format: [0|1] > If set to 1, on receiving an ACPI notify event > generated by hotkey, video driver will adjust brightness > level and then send out the event to user space through > - the allocated input device; If set to 0, video driver > + the allocated input device. If set to 0, video driver > will only send out the event without touching backlight > brightness level. > default: 1
On 3/22/22 10:41, Rafael J. Wysocki wrote: > On Mon, Mar 21, 2022 at 2:22 AM Randy Dunlap <rdunlap@infradead.org> wrote: >> Clean up some of admin-guide/kernel-parameters.txt: >> >> a. "smt" should be "smt=" (S390) >> b. add "smt-enabled" for POWERPC >> c. Sparc supports the vdso= boot option >> d. make the tp_printk options (2) formatting similar to other options >> by adding spacing >> e. add "trace_clock=" with a reference to Documentation/trace/ftrace.rst >> f. use [IA-64] as documented instead of [ia64] >> g. fix formatting and text for test_suspend= > This -> > >> h. fix formatting for swapaccount= >> i. fix formatting and grammar for video.brightness_switch_enabled= > -> and the last one are fine with me, but I suppose that there will be a v2? Yes, there will be a v2. thanks.
--- linux-next-20220318.orig/Documentation/admin-guide/kernel-parameters.txt +++ linux-next-20220318/Documentation/admin-guide/kernel-parameters.txt @@ -2814,7 +2814,7 @@ different yeeloong laptops. Example: machtype=lemote-yeeloong-2f-7inch - max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater + max_addr=nn[KMG] [KNL,BOOT,IA-64] All physical memory greater than or equal to this physical address is ignored. maxcpus= [SMP] Maximum number of processors that an SMP kernel @@ -3057,7 +3057,7 @@ mga= [HW,DRM] - min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this + min_addr=nn[KMG] [KNL,BOOT,IA-64] All physical memory below this physical address is ignored. mini2440= [ARM,HW,KNL] @@ -5382,13 +5382,19 @@ 1: Fast pin select (default) 2: ATC IRMode - smt [KNL,S390] Set the maximum number of threads (logical + smt= [KNL,S390] Set the maximum number of threads (logical CPUs) to use per physical CPU on systems capable of symmetric multithreading (SMT). Will be capped to the actual hardware limit. Format: <integer> Default: -1 (no limit) + smt-enabled= [PPC 64-bit] Enable SMT, disable SMT, or set the + maximum number of threads. This can be used to override + the Open Firmware (OF) option. + Format: on | off | <integer> + Default: all threads enabled + softlockup_panic= [KNL] Should the soft-lockup detector generate panics. Format: 0 | 1 @@ -5768,8 +5774,9 @@ This parameter controls use of the Protected Execution Facility on pSeries. - swapaccount=[0|1] - [KNL] Enable accounting of swap in memory resource + swapaccount= [KNL] + Format: [0|1] + Enable accounting of swap in memory resource controller if no parameter or 1 is given or disable it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst) @@ -5815,7 +5822,8 @@ tdfx= [HW,DRM] - test_suspend= [SUSPEND][,N] + test_suspend= [SUSPEND] + Format: { "mem" | "standby" | "freeze" }[,N] Specify "mem" (for Suspend-to-RAM) or "standby" (for standby suspend) or "freeze" (for suspend type freeze) as the system sleep state during system startup with @@ -5902,6 +5910,8 @@ trace_buf_size=nn[KMG] [FTRACE] will set tracing buffer size on each cpu. + trace_clock= [FTRACE] See Documentation/trace/ftrace.rst + trace_event=[event-list] [FTRACE] Set and start specified trace events in order to facilitate early boot debugging. The event-list is a @@ -5924,7 +5934,7 @@ See also Documentation/trace/ftrace.rst "trace options" section. - tp_printk[FTRACE] + tp_printk [FTRACE] Have the tracepoints sent to printk as well as the tracing ring buffer. This is useful for early boot up where the system hangs or reboots and does not give the @@ -5946,7 +5956,7 @@ frequency tracepoints such as irq or sched, can cause the system to live lock. - tp_printk_stop_on_boot[FTRACE] + tp_printk_stop_on_boot [FTRACE] When tp_printk (above) is set, it can cause a lot of noise on the console. It may be useful to only include the printing of events during boot up, as user space may @@ -6295,7 +6305,7 @@ HIGHMEM regardless of setting of CONFIG_HIGHPTE. - vdso= [X86,SH] + vdso= [X86,SH,SPARC] On X86_32, this is an alias for vdso32=. Otherwise: vdso=1: enable VDSO (the default) @@ -6321,11 +6331,12 @@ video= [FB] Frame buffer configuration See Documentation/fb/modedb.rst. - video.brightness_switch_enabled= [0,1] + video.brightness_switch_enabled= [ACPI] + Format: [0|1] If set to 1, on receiving an ACPI notify event generated by hotkey, video driver will adjust brightness level and then send out the event to user space through - the allocated input device; If set to 0, video driver + the allocated input device. If set to 0, video driver will only send out the event without touching backlight brightness level. default: 1
Clean up some of admin-guide/kernel-parameters.txt: a. "smt" should be "smt=" (S390) b. add "smt-enabled" for POWERPC c. Sparc supports the vdso= boot option d. make the tp_printk options (2) formatting similar to other options by adding spacing e. add "trace_clock=" with a reference to Documentation/trace/ftrace.rst f. use [IA-64] as documented instead of [ia64] g. fix formatting and text for test_suspend= h. fix formatting for swapaccount= i. fix formatting and grammar for video.brightness_switch_enabled= Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-ia64@vger.kernel.org Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: linux-pm@vger.kernel.org Cc: linux-acpi@vger.kernel.org Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org --- Documentation/admin-guide/kernel-parameters.txt | 33 +++++++++----- 1 file changed, 22 insertions(+), 11 deletions(-)