| Message ID | 20220605133300.376161-5-mail@conchuod.ie |
|---|---|
| State | New |
| Headers | show |
| Series | clear riscv dtbs_check errors | expand |
On 05/06/2022 15:32, mail@conchuod.ie wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > Convert the dt binding for the da9063/da9063l to yaml. > > Signed-off-by: Conor Dooley <conor.dooley@microchip.com> > --- > .../devicetree/bindings/mfd/da9063.txt | 111 ---------------- > .../devicetree/bindings/mfd/da9063.yaml | 123 ++++++++++++++++++ > .../devicetree/bindings/trivial-devices.yaml | 2 - > 3 files changed, 123 insertions(+), 113 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt > create mode 100644 Documentation/devicetree/bindings/mfd/da9063.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt > deleted file mode 100644 > index 91b79a21d403..000000000000 > --- a/Documentation/devicetree/bindings/mfd/da9063.txt > +++ /dev/null > @@ -1,111 +0,0 @@ > -* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) > - > -DA9063 consists of a large and varied group of sub-devices (I2C Only): > - > -Device Supply Names Description > ------- ------------ ----------- > -da9063-regulator : : LDOs & BUCKs > -da9063-onkey : : On Key > -da9063-rtc : : Real-Time Clock (DA9063 only) > -da9063-watchdog : : Watchdog > - > -====== > - > -Required properties: > - > -- compatible : Should be "dlg,da9063" or "dlg,da9063l" > -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be > - modified to match the chip's OTP settings). > -- interrupts : IRQ line information. > -- interrupt-controller > - > -Sub-nodes: > - > -- regulators : This node defines the settings for the LDOs and BUCKs. > - The DA9063(L) regulators are bound using their names listed below: > - > - bcore1 : BUCK CORE1 > - bcore2 : BUCK CORE2 > - bpro : BUCK PRO > - bmem : BUCK MEM > - bio : BUCK IO > - bperi : BUCK PERI > - ldo1 : LDO_1 (DA9063 only) > - ldo2 : LDO_2 (DA9063 only) > - ldo3 : LDO_3 > - ldo4 : LDO_4 (DA9063 only) > - ldo5 : LDO_5 (DA9063 only) > - ldo6 : LDO_6 (DA9063 only) > - ldo7 : LDO_7 > - ldo8 : LDO_8 > - ldo9 : LDO_9 > - ldo10 : LDO_10 (DA9063 only) > - ldo11 : LDO_11 > - > - The component follows the standard regulator framework and the bindings > - details of individual regulator device can be found in: > - Documentation/devicetree/bindings/regulator/regulator.txt > - > -- rtc : This node defines settings for the Real-Time Clock associated with > - the DA9063 only. The RTC is not present in DA9063L. There are currently > - no entries in this binding, however compatible = "dlg,da9063-rtc" should > - be added if a node is created. > - > -- onkey : This node defines the OnKey settings for controlling the key > - functionality of the device. The node should contain the compatible property > - with the value "dlg,da9063-onkey". > - > - Optional onkey properties: > - > - - dlg,disable-key-power : Disable power-down using a long key-press. If this > - entry exists the OnKey driver will remove support for the KEY_POWER key > - press. If this entry does not exist then by default the key-press > - triggered power down is enabled and the OnKey will support both KEY_POWER > - and KEY_SLEEP. > - > -- watchdog : This node defines settings for the Watchdog timer associated > - with the DA9063 and DA9063L. There are currently no entries in this > - binding, however compatible = "dlg,da9063-watchdog" should be added > - if a node is created. > - > - > -Example: > - > - pmic0: da9063@58 { > - compatible = "dlg,da9063" > - reg = <0x58>; > - interrupt-parent = <&gpio6>; > - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; > - interrupt-controller; > - > - rtc { > - compatible = "dlg,da9063-rtc"; > - }; > - > - wdt { > - compatible = "dlg,da9063-watchdog"; > - }; > - > - onkey { > - compatible = "dlg,da9063-onkey"; > - dlg,disable-key-power; > - }; > - > - regulators { > - DA9063_BCORE1: bcore1 { > - regulator-name = "BCORE1"; > - regulator-min-microvolt = <300000>; > - regulator-max-microvolt = <1570000>; > - regulator-min-microamp = <500000>; > - regulator-max-microamp = <2000000>; > - regulator-boot-on; > - }; > - DA9063_LDO11: ldo11 { > - regulator-name = "LDO_11"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <3600000>; > - regulator-boot-on; > - }; > - }; > - }; > - > diff --git a/Documentation/devicetree/bindings/mfd/da9063.yaml b/Documentation/devicetree/bindings/mfd/da9063.yaml > new file mode 100644 > index 000000000000..376880061f42 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/da9063.yaml dlg,da9063.yaml > @@ -0,0 +1,123 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/da9063.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) > + > +maintainers: > + - Steve Twiss <stwiss.opensource@diasemi.com> > + > +description: | > + For device-tree bindings of other sub-modules refer to the binding documents > + under the respective sub-system directories. > + > +properties: > + compatible: > + enum: > + - dlg,da9063 > + - dlg,da9063l > + > + reg: > + description: > + I2C device address. Skip description. > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + interrupt-controller: true > + > + "#interrupt-cells": > + const: 2 > + > + watchdog: > + type: object > + $ref: ../watchdog/watchdog.yaml# 1. full reference, so /schemas/watchdog/.... 2. unevaluatedProperties:false > + properties: > + compatible: > + const: dlg,da9063-watchdog > + > + rtc: > + type: object > + $ref: ../rtc/rtc.yaml# Ditto > + properties: > + compatible: > + const: dlg,da9063-rtc > + > + onkey: > + type: object > + $ref: ../input/input.yaml# Ditto > + properties: > + compatible: > + const: dlg,da9063-onkey > + > + dlg,disable-key-power: > + type: boolean > + description: | > + Disable power-down using a long key-press. > + If this entry does not exist then by default the key-press triggered > + power down is enabled and the OnKey will support both KEY_POWER and > + KEY_SLEEP. > + > + regulators: > + type: object > + patternProperties: > + "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$": > + $ref: ../regulator/regulator.yaml Ditto > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-controller > + Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt deleted file mode 100644 index 91b79a21d403..000000000000 --- a/Documentation/devicetree/bindings/mfd/da9063.txt +++ /dev/null @@ -1,111 +0,0 @@ -* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) - -DA9063 consists of a large and varied group of sub-devices (I2C Only): - -Device Supply Names Description ------- ------------ ----------- -da9063-regulator : : LDOs & BUCKs -da9063-onkey : : On Key -da9063-rtc : : Real-Time Clock (DA9063 only) -da9063-watchdog : : Watchdog - -====== - -Required properties: - -- compatible : Should be "dlg,da9063" or "dlg,da9063l" -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). -- interrupts : IRQ line information. -- interrupt-controller - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9063(L) regulators are bound using their names listed below: - - bcore1 : BUCK CORE1 - bcore2 : BUCK CORE2 - bpro : BUCK PRO - bmem : BUCK MEM - bio : BUCK IO - bperi : BUCK PERI - ldo1 : LDO_1 (DA9063 only) - ldo2 : LDO_2 (DA9063 only) - ldo3 : LDO_3 - ldo4 : LDO_4 (DA9063 only) - ldo5 : LDO_5 (DA9063 only) - ldo6 : LDO_6 (DA9063 only) - ldo7 : LDO_7 - ldo8 : LDO_8 - ldo9 : LDO_9 - ldo10 : LDO_10 (DA9063 only) - ldo11 : LDO_11 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - -- rtc : This node defines settings for the Real-Time Clock associated with - the DA9063 only. The RTC is not present in DA9063L. There are currently - no entries in this binding, however compatible = "dlg,da9063-rtc" should - be added if a node is created. - -- onkey : This node defines the OnKey settings for controlling the key - functionality of the device. The node should contain the compatible property - with the value "dlg,da9063-onkey". - - Optional onkey properties: - - - dlg,disable-key-power : Disable power-down using a long key-press. If this - entry exists the OnKey driver will remove support for the KEY_POWER key - press. If this entry does not exist then by default the key-press - triggered power down is enabled and the OnKey will support both KEY_POWER - and KEY_SLEEP. - -- watchdog : This node defines settings for the Watchdog timer associated - with the DA9063 and DA9063L. There are currently no entries in this - binding, however compatible = "dlg,da9063-watchdog" should be added - if a node is created. - - -Example: - - pmic0: da9063@58 { - compatible = "dlg,da9063" - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9063-rtc"; - }; - - wdt { - compatible = "dlg,da9063-watchdog"; - }; - - onkey { - compatible = "dlg,da9063-onkey"; - dlg,disable-key-power; - }; - - regulators { - DA9063_BCORE1: bcore1 { - regulator-name = "BCORE1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-boot-on; - }; - DA9063_LDO11: ldo11 { - regulator-name = "LDO_11"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/mfd/da9063.yaml b/Documentation/devicetree/bindings/mfd/da9063.yaml new file mode 100644 index 000000000000..376880061f42 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/da9063.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/da9063.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) + +maintainers: + - Steve Twiss <stwiss.opensource@diasemi.com> + +description: | + For device-tree bindings of other sub-modules refer to the binding documents + under the respective sub-system directories. + +properties: + compatible: + enum: + - dlg,da9063 + - dlg,da9063l + + reg: + description: + I2C device address. + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + watchdog: + type: object + $ref: ../watchdog/watchdog.yaml# + properties: + compatible: + const: dlg,da9063-watchdog + + rtc: + type: object + $ref: ../rtc/rtc.yaml# + properties: + compatible: + const: dlg,da9063-rtc + + onkey: + type: object + $ref: ../input/input.yaml# + properties: + compatible: + const: dlg,da9063-onkey + + dlg,disable-key-power: + type: boolean + description: | + Disable power-down using a long key-press. + If this entry does not exist then by default the key-press triggered + power down is enabled and the OnKey will support both KEY_POWER and + KEY_SLEEP. + + regulators: + type: object + patternProperties: + "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$": + $ref: ../regulator/regulator.yaml + +required: + - compatible + - reg + - interrupts + - interrupt-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + #interrupt-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + watchdog { + compatible = "dlg,da9063-watchdog"; + }; + + onkey { + compatible = "dlg,da9063-onkey"; + dlg,disable-key-power; + }; + + regulators { + regulator-bcore1 { + regulator-name = "BCORE1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-boot-on; + }; + regulator-ldo11 { + regulator-name = "LDO_11"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 6aafa71806a3..00acb9078cc0 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -93,8 +93,6 @@ properties: - dh,dhcom-board # DA9053: flexible system level PMIC with multicore support - dlg,da9053 - # DA9063: system PMIC for quad-core application processors - - dlg,da9063 # DMARD05: 3-axis I2C Accelerometer - domintech,dmard05 # DMARD06: 3-axis I2C Accelerometer