diff mbox series

[1/3] dt-bindings: leds: skyworks,aat1290: convert to dtschema

Message ID 20220607085343.72414-1-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series [1/3] dt-bindings: leds: skyworks,aat1290: convert to dtschema | expand

Commit Message

Krzysztof Kozlowski June 7, 2022, 8:53 a.m. UTC 
Convert the Skyworks Solutions, Inc. AAT1290 Current Regulator bindings
to DT Schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/leds/leds-aat1290.txt | 77 ---------------
 .../bindings/leds/skyworks,aat1290.yaml       | 96 +++++++++++++++++++
 2 files changed, 96 insertions(+), 77 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-aat1290.txt
 create mode 100644 Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml

Comments

Rob Herring June 9, 2022, 8:10 p.m. UTC | #1 
On Tue, 07 Jun 2022 10:53:41 +0200, Krzysztof Kozlowski wrote:
> Convert the Skyworks Solutions, Inc. AAT1290 Current Regulator bindings
> to DT Schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/leds/leds-aat1290.txt | 77 ---------------
>  .../bindings/leds/skyworks,aat1290.yaml       | 96 +++++++++++++++++++
>  2 files changed, 96 insertions(+), 77 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/leds/leds-aat1290.txt
>  create mode 100644 Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Jacek Anaszewski June 9, 2022, 8:28 p.m. UTC | #2 
Hi Krzysztof,

On 6/7/22 10:53, Krzysztof Kozlowski wrote:
> Convert the Skyworks Solutions, Inc. AAT1290 Current Regulator bindings
> to DT Schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[...]
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/leds/common.h>
> +
> +    // Ct = 220 nF, Rset = 160 kOhm
> +    led-controller {
> +        compatible = "skyworks,aat1290";
> +        flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
> +        enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
> +
> +        pinctrl-names = "default", "host", "isp";
> +        pinctrl-0 = <&camera_flash_host>;
> +        pinctrl-1 = <&camera_flash_host>;
> +        pinctrl-2 = <&camera_flash_isp>;
> +
> +        led {
> +            label = "flash";

Why are you adding label? It is deprecated, but has the precedence over
new function and color for backwards compatibility, so it would make
those unused by the driver now. Please drop the label from this example.

> +            function = LED_FUNCTION_FLASH;
> +            color = <LED_COLOR_ID_WHITE>;
> +            led-max-microamp = <520833>;
> +            flash-max-microamp = <1012500>;
> +            flash-max-timeout-us = <1940000>;
> +        };
> +    };
Krzysztof Kozlowski June 10, 2022, 10:12 a.m. UTC | #3 
On 09/06/2022 22:28, Jacek Anaszewski wrote:
> Hi Krzysztof,
> 
> On 6/7/22 10:53, Krzysztof Kozlowski wrote:
>> Convert the Skyworks Solutions, Inc. AAT1290 Current Regulator bindings
>> to DT Schema.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> [...]
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +    #include <dt-bindings/leds/common.h>
>> +
>> +    // Ct = 220 nF, Rset = 160 kOhm
>> +    led-controller {
>> +        compatible = "skyworks,aat1290";
>> +        flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
>> +        enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
>> +
>> +        pinctrl-names = "default", "host", "isp";
>> +        pinctrl-0 = <&camera_flash_host>;
>> +        pinctrl-1 = <&camera_flash_host>;
>> +        pinctrl-2 = <&camera_flash_isp>;
>> +
>> +        led {
>> +            label = "flash";
> 
> Why are you adding label? It is deprecated, 

Eh, so it should be marked as deprecated:true, not just mentioned in the
description (common.yaml).

> but has the precedence over
> new function and color for backwards compatibility, so it would make
> those unused by the driver now. Please drop the label from this example.

I synced the example with DTS, but I can drop it. No problem.


Best regards,
Krzysztof
Jacek Anaszewski June 12, 2022, 3:08 p.m. UTC | #4 
On 6/10/22 12:12, Krzysztof Kozlowski wrote:
> On 09/06/2022 22:28, Jacek Anaszewski wrote:
>> Hi Krzysztof,
>>
>> On 6/7/22 10:53, Krzysztof Kozlowski wrote:
>>> Convert the Skyworks Solutions, Inc. AAT1290 Current Regulator bindings
>>> to DT Schema.
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> [...]
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> +  - |
>>> +    #include <dt-bindings/gpio/gpio.h>
>>> +    #include <dt-bindings/leds/common.h>
>>> +
>>> +    // Ct = 220 nF, Rset = 160 kOhm
>>> +    led-controller {
>>> +        compatible = "skyworks,aat1290";
>>> +        flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
>>> +        enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
>>> +
>>> +        pinctrl-names = "default", "host", "isp";
>>> +        pinctrl-0 = <&camera_flash_host>;
>>> +        pinctrl-1 = <&camera_flash_host>;
>>> +        pinctrl-2 = <&camera_flash_isp>;
>>> +
>>> +        led {
>>> +            label = "flash";
>>
>> Why are you adding label? It is deprecated,
> 
> Eh, so it should be marked as deprecated:true, not just mentioned in the
> description (common.yaml).

I believe so.

>> but has the precedence over
>> new function and color for backwards compatibility, so it would make
>> those unused by the driver now. Please drop the label from this example.
> 
> I synced the example with DTS, but I can drop it. No problem.

Yeah, let's avoid further confusion.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
deleted file mode 100644
index 62ed17ec075b..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-aat1290.txt
+++ /dev/null
@@ -1,77 +0,0 @@ 
-* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
-
-The device is controlled through two pins: FL_EN and EN_SET. The pins when,
-asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
-respectively. In order to add a capability of selecting the strobe signal source
-(e.g. CPU or camera sensor) there is an additional switch required, independent
-of the flash chip. The switch is controlled with pin control.
-
-Required properties:
-
-- compatible : Must be "skyworks,aat1290".
-- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
-- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
-
-Optional properties:
-- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
-		"default" and "host" must refer to the same pin configuration
-		node, which sets the host as a strobe signal provider. Entry
-		"isp" must refer to the pin configuration node, which sets the
-		ISP as a strobe signal provider.
-
-A discrete LED element connected to the device must be represented by a child
-node - see Documentation/devicetree/bindings/leds/common.txt.
-
-Required properties of the LED child node:
-- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-                       Maximum flash LED supply current can be calculated using
-                       following formula: I = 1A * 162kohm / Rset.
-- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
-                         Maximum flash timeout can be calculated using following
-                         formula: T = 8.82 * 10^9 * Ct.
-
-Optional properties of the LED child node:
-- function : see Documentation/devicetree/bindings/leds/common.txt
-- color : see Documentation/devicetree/bindings/leds/common.txt
-- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-
-Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
-a switch that allows for routing strobe signal either from the host or from
-the camera sensor):
-
-#include "exynos4412.dtsi"
-#include <dt-bindings/leds/common.h>
-
-led-controller {
-	compatible = "skyworks,aat1290";
-	flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
-	enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default", "host", "isp";
-	pinctrl-0 = <&camera_flash_host>;
-	pinctrl-1 = <&camera_flash_host>;
-	pinctrl-2 = <&camera_flash_isp>;
-
-	camera_flash: led {
-		function = LED_FUNCTION_FLASH;
-		color = <LED_COLOR_ID_WHITE>;
-		led-max-microamp = <520833>;
-		flash-max-microamp = <1012500>;
-		flash-max-timeout-us = <1940000>;
-	};
-};
-
-&pinctrl_0 {
-	camera_flash_host: camera-flash-host {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-val = <0>;
-	};
-
-	camera_flash_isp: camera-flash-isp {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-val = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
new file mode 100644
index 000000000000..919ee0e30b10
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
@@ -0,0 +1,96 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
+  asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+  respectively. In order to add a capability of selecting the strobe signal
+  source (e.g. CPU or camera sensor) there is an additional switch required,
+  independent of the flash chip. The switch is controlled with pin control.
+
+properties:
+  compatible:
+    const: skyworks,aat1290
+
+  enset-gpios:
+    maxItems: 1
+    description: EN_SET pin
+
+  flen-gpios:
+    maxItems: 1
+    description: FL_EN pin
+
+  led:
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-max-microamp: true
+
+      flash-max-microamp:
+        description: |
+          Maximum flash LED supply current can be calculated using following
+          formula:: I = 1A * 162 kOhm / Rset.
+
+      flash-max-timeout-us:
+        description: |
+          Maximum flash timeout can be calculated using following formula::
+            T = 8.82 * 10^9 * Ct.
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: host
+      - const: isp
+
+  pinctrl-0: true
+  pinctrl-1: true
+  pinctrl-2: true
+
+required:
+  - compatible
+  - enset-gpios
+  - flen-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    // Ct = 220 nF, Rset = 160 kOhm
+    led-controller {
+        compatible = "skyworks,aat1290";
+        flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+        enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+        pinctrl-names = "default", "host", "isp";
+        pinctrl-0 = <&camera_flash_host>;
+        pinctrl-1 = <&camera_flash_host>;
+        pinctrl-2 = <&camera_flash_isp>;
+
+        led {
+            label = "flash";
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <520833>;
+            flash-max-microamp = <1012500>;
+            flash-max-timeout-us = <1940000>;
+        };
+    };