| Message ID | 20220704212402.1715182-1-robimarko@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 | expand |
On 04/07/2022 23:23, Robert Marko wrote: > Document the compatible for PMP8074 which has 12 GPIO-s with holes at > GPIO1 and GPIO12. > > Signed-off-by: Robert Marko <robimarko@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Mon, 4 Jul 2022 23:24:00 +0200 Robert Marko <robimarko@gmail.com> wrote: > Add support for ADC5_VREF_VADC channel to rev2 ADC5 channel list. > This channel measures the VADC reference LDO output. > > Signed-off-by: Robert Marko <robimarko@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> I'm assuming this will go in via MFD. Shout if I should pick it up directly. Thanks, Jonathan > --- > drivers/iio/adc/qcom-spmi-adc5.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c > index 87438d1e5c0b..7bd3745884f0 100644 > --- a/drivers/iio/adc/qcom-spmi-adc5.c > +++ b/drivers/iio/adc/qcom-spmi-adc5.c > @@ -589,6 +589,8 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = { > SCALE_HW_CALIB_DEFAULT) > [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, > SCALE_HW_CALIB_DEFAULT) > + [ADC5_VREF_VADC] = ADC5_CHAN_VOLT("vref_vadc", 0, > + SCALE_HW_CALIB_DEFAULT) > [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, > SCALE_HW_CALIB_DEFAULT) > [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1,
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt index eb78e3ae7703..c46d17609f3a 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt @@ -46,6 +46,7 @@ Required properties: "qcom,pmi8998", "qcom,pmk8002", "qcom,pmk8350", + "qcom,pmp8074", "qcom,pmr735a", "qcom,smb2351", or generalized "qcom,spmi-pmic".
Document compatible for the PMP8074 PMIC. I planned to convert the bindings to dtschema, but there is already a patch to do so [1]. I will make a patch to add the compatible to dtschema once it gets accepted. [1] https://lore.kernel.org/linux-arm-msm/20220626191630.176835-1-david@ixit.cz/ Signed-off-by: Robert Marko <robimarko@gmail.com> --- Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt | 1 + 1 file changed, 1 insertion(+)