Message ID | 20220722075600.10943-1-dev@pschenker.ch |
---|---|
State | New |
Headers | show |
Series | arm64: dts: verdin-imx8mm: add otg2 pd to usbphy | expand |
On Fri, 2022-07-22 at 09:55 +0200, Philippe Schenker wrote: > From: Philippe Schenker <philippe.schenker@toradex.com> > > The Verdin iMX8M Mini System on Module does not have VBUS signal > connected on Verdin USB_2 (usbotg2). On Verdin Development board this is > no problem, as we have connected a USB-Hub that is always connected. > > However, if Verdin USB_2 is desired to be used as a single USB-Host port > the chipidea driver does not detect if a USB device is plugged into this > port, due to runtime pm shutting down the PHY. > > Add the power-domain &pgc_otg2 to &usbphynop2 in order to detect > plugging events and enumerate the usb device. > > Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini") > Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Gumstix Verdin EdgeAi > --- > > arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm- > verdin.dtsi > index eafa88d980b3..197da74837ca 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi > @@ -737,6 +737,7 @@ &usbphynop1 { > }; > > &usbphynop2 { > + power-domains = <&pgc_otg2>; > vcc-supply = <®_vdd_3v3>; > };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index eafa88d980b3..197da74837ca 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -737,6 +737,7 @@ &usbphynop1 { }; &usbphynop2 { + power-domains = <&pgc_otg2>; vcc-supply = <®_vdd_3v3>; };