diff mbox series

[2/4] media: dt-bindings: media: Document RZ/G2L CRU

Message ID 20220801214718.16943-3-prabhakar.mahadev-lad.rj@bp.renesas.com
State Superseded
Headers show
Series Add driver for CSI2 and CRU modules found on Renesas RZ/G2L SoC | expand

Commit Message

Prabhakar Mahadev Lad Aug. 1, 2022, 9:47 p.m. UTC 
Document the CRU block found on Renesas RZ/G2L SoC's.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
RFC v2 -> v1
* Dropped endpoint stuff from port1 as suggested by Rob
* Updated description for endpoint

RFC v1 -> RFC v2
* Dropped CSI
---
 .../bindings/media/renesas,rzg2l-cru.yaml     | 142 ++++++++++++++++++
 1 file changed, 142 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml

Comments

Krzysztof Kozlowski Aug. 2, 2022, 7:37 a.m. UTC | #1 
On 01/08/2022 23:47, Lad Prabhakar wrote:
> Document the CRU block found on Renesas RZ/G2L SoC's.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> RFC v2 -> v1
> * Dropped endpoint stuff from port1 as suggested by Rob
> * Updated description for endpoint
> 
> RFC v1 -> RFC v2
> * Dropped CSI
> ---
>  .../bindings/media/renesas,rzg2l-cru.yaml     | 142 ++++++++++++++++++
>  1 file changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> new file mode 100644
> index 000000000000..d7389693dae9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
> +
> +maintainers:
> +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> +
> +description:
> +  The CRU image processing module is a data conversion module equipped with pixel
> +  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
> +  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
> +
> +properties:
> +  compatible:
> +    oneOf:

No need for oneOf, unless you already have a patch adding second case to
oneOf.

> +      - items:
> +          - enum:
> +              - renesas,r9a07g044-cru     # RZ/G2{L,LC}
> +              - renesas,r9a07g054-cru     # RZ/V2L
> +          - const: renesas,rzg2l-cru
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 3
> +
> +  interrupt-names:
> +    items:
> +      - const: image_conv
> +      - const: image_conv_err
> +      - const: axi_mst_err
> +
> +  clocks:
> +    items:
> +      - description: CRU Main clock
> +      - description: CPU Register access clock
> +      - description: CRU image transfer clock
> +
> +  clock-names:
> +    items:
> +      - const: vclk
> +      - const: pclk
> +      - const: aclk
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: CRU_PRESETN reset terminal
> +      - description: CRU_ARESETN reset terminal
> +
> +  reset-names:
> +    items:
> +      - const: presetn
> +      - const: aresetn
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing a parallel input source.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              hsync-active: true
> +              vsync-active: true
> +              bus-width: true
> +              data-shift: true
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Input port node, describing the Image Processing module connected to the
> +          CSI-2 receiver.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> +  # Device node example with CSI-2
> +  - |
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    cru: video@10830000 {
> +            compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";

Also 4-space for DTS example, please.



Best regards,
Krzysztof
Lad, Prabhakar Aug. 3, 2022, 1:37 p.m. UTC | #2 
Hi Krzysztof,

Thank you for the review.

On Tue, Aug 2, 2022 at 8:37 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 01/08/2022 23:47, Lad Prabhakar wrote:
> > Document the CRU block found on Renesas RZ/G2L SoC's.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > RFC v2 -> v1
> > * Dropped endpoint stuff from port1 as suggested by Rob
> > * Updated description for endpoint
> >
> > RFC v1 -> RFC v2
> > * Dropped CSI
> > ---
> >  .../bindings/media/renesas,rzg2l-cru.yaml     | 142 ++++++++++++++++++
> >  1 file changed, 142 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > new file mode 100644
> > index 000000000000..d7389693dae9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > @@ -0,0 +1,142 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
> > +
> > +maintainers:
> > +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description:
> > +  The CRU image processing module is a data conversion module equipped with pixel
> > +  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
> > +  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
>
> No need for oneOf, unless you already have a patch adding second case to
> oneOf.
>
Agreed, I will drop that.

> > +      - items:
> > +          - enum:
> > +              - renesas,r9a07g044-cru     # RZ/G2{L,LC}
> > +              - renesas,r9a07g054-cru     # RZ/V2L
> > +          - const: renesas,rzg2l-cru
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 3
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: image_conv
> > +      - const: image_conv_err
> > +      - const: axi_mst_err
> > +
> > +  clocks:
> > +    items:
> > +      - description: CRU Main clock
> > +      - description: CPU Register access clock
> > +      - description: CRU image transfer clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: vclk
> > +      - const: pclk
> > +      - const: aclk
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    items:
> > +      - description: CRU_PRESETN reset terminal
> > +      - description: CRU_ARESETN reset terminal
> > +
> > +  reset-names:
> > +    items:
> > +      - const: presetn
> > +      - const: aresetn
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description:
> > +          Input port node, single endpoint describing a parallel input source.
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              hsync-active: true
> > +              vsync-active: true
> > +              bus-width: true
> > +              data-shift: true
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Input port node, describing the Image Processing module connected to the
> > +          CSI-2 receiver.
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - interrupt-names
> > +  - clocks
> > +  - clock-names
> > +  - resets
> > +  - reset-names
> > +  - power-domains
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  # Device node example with CSI-2
> > +  - |
> > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    cru: video@10830000 {
> > +            compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
>
> Also 4-space for DTS example, please.
>
Agreed.

Cheers,
Prabhakar
Laurent Pinchart Aug. 29, 2022, 11:42 p.m. UTC | #3 
Hi Prabhakar,

Thank you for the patch.

On Mon, Aug 01, 2022 at 10:47:16PM +0100, Lad Prabhakar wrote:
> Document the CRU block found on Renesas RZ/G2L SoC's.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> RFC v2 -> v1
> * Dropped endpoint stuff from port1 as suggested by Rob
> * Updated description for endpoint
> 
> RFC v1 -> RFC v2
> * Dropped CSI
> ---
>  .../bindings/media/renesas,rzg2l-cru.yaml     | 142 ++++++++++++++++++
>  1 file changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> new file mode 100644
> index 000000000000..d7389693dae9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
> +
> +maintainers:
> +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> +
> +description:
> +  The CRU image processing module is a data conversion module equipped with pixel
> +  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
> +  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
> +
> +properties:
> +  compatible:
> +    oneOf:

No oneOf here either.

> +      - items:
> +          - enum:
> +              - renesas,r9a07g044-cru     # RZ/G2{L,LC}
> +              - renesas,r9a07g054-cru     # RZ/V2L
> +          - const: renesas,rzg2l-cru
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 3
> +
> +  interrupt-names:
> +    items:
> +      - const: image_conv
> +      - const: image_conv_err
> +      - const: axi_mst_err
> +
> +  clocks:
> +    items:
> +      - description: CRU Main clock
> +      - description: CPU Register access clock
> +      - description: CRU image transfer clock
> +
> +  clock-names:
> +    items:
> +      - const: vclk
> +      - const: pclk
> +      - const: aclk
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: CRU_PRESETN reset terminal
> +      - description: CRU_ARESETN reset terminal
> +
> +  reset-names:
> +    items:
> +      - const: presetn
> +      - const: aresetn
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing a parallel input source.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              hsync-active: true
> +              vsync-active: true
> +              bus-width: true
> +              data-shift: true
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Input port node, describing the Image Processing module connected to the
> +          CSI-2 receiver.

Both ports should be mandatory as they exist at the hardware level.
Connections (through endpoints) are optional.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> +  # Device node example with CSI-2
> +  - |
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    cru: video@10830000 {
> +            compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
> +            reg = <0x10830000 0x400>;
> +            interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
> +            clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
> +            clock-names = "vclk", "pclk", "aclk";
> +            power-domains = <&cpg>;
> +            resets = <&cpg R9A07G044_CRU_PRESETN>,
> +                     <&cpg R9A07G044_CRU_ARESETN>;
> +            reset-names = "presetn", "aresetn";
> +
> +            ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    port@1 {
> +                            #address-cells = <1>;
> +                            #size-cells = <0>;
> +
> +                            reg = <1>;
> +
> +                            crucsi2: endpoint@0 {
> +                                    reg = <0>;
> +                                    remote-endpoint= <&csi2cru>;
> +                            };
> +                    };
> +            };
> +    };
Lad, Prabhakar Aug. 30, 2022, 11:13 a.m. UTC | #4 
Hi Laurent,

Thank you for the review.

On Tue, Aug 30, 2022 at 12:42 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Mon, Aug 01, 2022 at 10:47:16PM +0100, Lad Prabhakar wrote:
> > Document the CRU block found on Renesas RZ/G2L SoC's.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > RFC v2 -> v1
> > * Dropped endpoint stuff from port1 as suggested by Rob
> > * Updated description for endpoint
> >
> > RFC v1 -> RFC v2
> > * Dropped CSI
> > ---
> >  .../bindings/media/renesas,rzg2l-cru.yaml     | 142 ++++++++++++++++++
> >  1 file changed, 142 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > new file mode 100644
> > index 000000000000..d7389693dae9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > @@ -0,0 +1,142 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
> > +
> > +maintainers:
> > +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description:
> > +  The CRU image processing module is a data conversion module equipped with pixel
> > +  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
> > +  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
>
> No oneOf here either.
>
Agreed, I will drop it.

> > +      - items:
> > +          - enum:
> > +              - renesas,r9a07g044-cru     # RZ/G2{L,LC}
> > +              - renesas,r9a07g054-cru     # RZ/V2L
> > +          - const: renesas,rzg2l-cru
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 3
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: image_conv
> > +      - const: image_conv_err
> > +      - const: axi_mst_err
> > +
> > +  clocks:
> > +    items:
> > +      - description: CRU Main clock
> > +      - description: CPU Register access clock
> > +      - description: CRU image transfer clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: vclk
> > +      - const: pclk
> > +      - const: aclk
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    items:
> > +      - description: CRU_PRESETN reset terminal
> > +      - description: CRU_ARESETN reset terminal
> > +
> > +  reset-names:
> > +    items:
> > +      - const: presetn
> > +      - const: aresetn
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description:
> > +          Input port node, single endpoint describing a parallel input source.
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              hsync-active: true
> > +              vsync-active: true
> > +              bus-width: true
> > +              data-shift: true
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Input port node, describing the Image Processing module connected to the
> > +          CSI-2 receiver.
>
> Both ports should be mandatory as they exist at the hardware level.
> Connections (through endpoints) are optional.
>
Agreed, I will make the ports as required.

Cheers,
Prabhakar
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
new file mode 100644
index 000000000000..d7389693dae9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -0,0 +1,142 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CRU image processing module is a data conversion module equipped with pixel
+  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
+  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g044-cru     # RZ/G2{L,LC}
+              - renesas,r9a07g054-cru     # RZ/V2L
+          - const: renesas,rzg2l-cru
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: image_conv
+      - const: image_conv_err
+      - const: axi_mst_err
+
+  clocks:
+    items:
+      - description: CRU Main clock
+      - description: CPU Register access clock
+      - description: CRU image transfer clock
+
+  clock-names:
+    items:
+      - const: vclk
+      - const: pclk
+      - const: aclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_PRESETN reset terminal
+      - description: CRU_ARESETN reset terminal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: aresetn
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing a parallel input source.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active: true
+              vsync-active: true
+              bus-width: true
+              data-shift: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, describing the Image Processing module connected to the
+          CSI-2 receiver.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  # Device node example with CSI-2
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cru: video@10830000 {
+            compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+            reg = <0x10830000 0x400>;
+            interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+            clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+                     <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+            clock-names = "vclk", "pclk", "aclk";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_CRU_PRESETN>,
+                     <&cpg R9A07G044_CRU_ARESETN>;
+            reset-names = "presetn", "aresetn";
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            crucsi2: endpoint@0 {
+                                    reg = <0>;
+                                    remote-endpoint= <&csi2cru>;
+                            };
+                    };
+            };
+    };