dt-bindings: gpio: fairchild,74hc595: use spi-peripheral-props.yaml

Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Technically, this depends on [1] merged to SPI tree, if we want to
preserve existing behavior of not allowing SPI CPHA and CPOL in each of
schemas in this patch.

If this patch comes independently via different tree, the SPI CPHA and
CPOL will be allowed for brief period of time, before [1] is merged.
This will not have negative impact, just DT schema checks will be
loosened for that period.

[1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/
---
 .../devicetree/bindings/gpio/fairchild,74hc595.yaml        | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

On Wed, 27 Jul 2022 18:42:51 +0200, Krzysztof Kozlowski wrote:
> Instead of listing directly properties typical for SPI peripherals,
> reference the spi-peripheral-props.yaml schema.  This allows using all
> properties typical for SPI-connected devices, even these which device
> bindings author did not tried yet.
> 
> Remove the spi-* properties which now come via spi-peripheral-props.yaml
> schema, except for the cases when device schema adds some constraints
> like maximum frequency.
> 
> While changing additionalProperties->unevaluatedProperties, put it in
> typical place, just before example DTS.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Technically, this depends on [1] merged to SPI tree, if we want to
> preserve existing behavior of not allowing SPI CPHA and CPOL in each of
> schemas in this patch.
> 
> If this patch comes independently via different tree, the SPI CPHA and
> CPOL will be allowed for brief period of time, before [1] is merged.
> This will not have negative impact, just DT schema checks will be
> loosened for that period.
> 
> [1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/
> ---
>  .../devicetree/bindings/gpio/fairchild,74hc595.yaml        | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

On Wed, Jul 27, 2022 at 6:43 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:

> Instead of listing directly properties typical for SPI peripherals,
> reference the spi-peripheral-props.yaml schema.  This allows using all
> properties typical for SPI-connected devices, even these which device
> bindings author did not tried yet.
>
> Remove the spi-* properties which now come via spi-peripheral-props.yaml
> schema, except for the cases when device schema adds some constraints
> like maximum frequency.
>
> While changing additionalProperties->unevaluatedProperties, put it in
> typical place, just before example DTS.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

On Wed, Jul 27, 2022 at 6:43 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> Instead of listing directly properties typical for SPI peripherals,
> reference the spi-peripheral-props.yaml schema.  This allows using all
> properties typical for SPI-connected devices, even these which device
> bindings author did not tried yet.
>
> Remove the spi-* properties which now come via spi-peripheral-props.yaml
> schema, except for the cases when device schema adds some constraints
> like maximum frequency.
>
> While changing additionalProperties->unevaluatedProperties, put it in
> typical place, just before example DTS.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Technically, this depends on [1] merged to SPI tree, if we want to
> preserve existing behavior of not allowing SPI CPHA and CPOL in each of
> schemas in this patch.
>
> If this patch comes independently via different tree, the SPI CPHA and
> CPOL will be allowed for brief period of time, before [1] is merged.
> This will not have negative impact, just DT schema checks will be
> loosened for that period.
>
> [1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/
> ---
>  .../devicetree/bindings/gpio/fairchild,74hc595.yaml        | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
> index a99e7842ca17..c0ad70e66f76 100644
> --- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
> +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
> @@ -33,8 +33,6 @@ properties:
>      description: GPIO connected to the OE (Output Enable) pin.
>      maxItems: 1
>
> -  spi-max-frequency: true
> -
>  patternProperties:
>    "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
>      type: object
> @@ -59,7 +57,10 @@ required:
>    - '#gpio-cells'
>    - registers-number
>
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>
>  examples:
>    - |
> --
> 2.34.1
>

Applied, thanks!

Bart