| Message ID | cover.1658192351.git.Thinh.Nguyen@synopsys.com |
|---|---|
| Headers | show |
| Series | usb: gadget: f_tcm: Enhance UASP driver | expand |
On Mon, Jul 18, 2022 at 06:26:01PM -0700, Thinh Nguyen wrote: > The Linux UASP gadget driver is incomplete and remained broken for a long time. > It was not implemented for performance either. This series adds some of the > required features for the UASP driver to work. It also makes some changes to > the target core. > > This is tested against UASP CV and DWC_usb3x controller. It still needs some > fixes in the target core, which will be separated from this series. > > There are still more room for performance improvement and fixes. However, this > series should be sufficient to bring up a working UASP device. > > > Changes in v2: > - Remove most target core changes from this series and only keep the must-have > ones > - Split the task-management patch to smaller patches > - Don't send failure Task Management response to target core, reducing > dependency > - Add UASP bringup script example in cover page > - Make various small updates according to feedbacks I would need a review by the target maintainers before being able to take any of the USB gadget changes into the USB tree... thanks, greg k-h
Hi Martin, Dmitry, and others, On Fri, Aug 19, 2022 at 10:31:23AM +0200, Greg Kroah-Hartman wrote: > On Mon, Jul 18, 2022 at 06:26:01PM -0700, Thinh Nguyen wrote: > > The Linux UASP gadget driver is incomplete and remained broken for a long time. > > It was not implemented for performance either. This series adds some of the > > required features for the UASP driver to work. It also makes some changes to > > the target core. > > > > This is tested against UASP CV and DWC_usb3x controller. It still needs some > > fixes in the target core, which will be separated from this series. > > > > There are still more room for performance improvement and fixes. However, this > > series should be sufficient to bring up a working UASP device. > > > > > > Changes in v2: > > - Remove most target core changes from this series and only keep the must-have > > ones > > - Split the task-management patch to smaller patches > > - Don't send failure Task Management response to target core, reducing > > dependency > > - Add UASP bringup script example in cover page > > - Make various small updates according to feedbacks > > I would need a review by the target maintainers before being able to > take any of the USB gadget changes into the USB tree... > Do you have any comment on this series? Thanks, Thinh
On Fri, Aug 19, 2022, Thinh Nguyen wrote: > Hi Martin, Dmitry, and others, > > On Fri, Aug 19, 2022 at 10:31:23AM +0200, Greg Kroah-Hartman wrote: > > On Mon, Jul 18, 2022 at 06:26:01PM -0700, Thinh Nguyen wrote: > > > The Linux UASP gadget driver is incomplete and remained broken for a long time. > > > It was not implemented for performance either. This series adds some of the > > > required features for the UASP driver to work. It also makes some changes to > > > the target core. > > > > > > This is tested against UASP CV and DWC_usb3x controller. It still needs some > > > fixes in the target core, which will be separated from this series. > > > > > > There are still more room for performance improvement and fixes. However, this > > > series should be sufficient to bring up a working UASP device. > > > > > > > > > Changes in v2: > > > - Remove most target core changes from this series and only keep the must-have > > > ones > > > - Split the task-management patch to smaller patches > > > - Don't send failure Task Management response to target core, reducing > > > dependency > > > - Add UASP bringup script example in cover page > > > - Make various small updates according to feedbacks > > > > I would need a review by the target maintainers before being able to > > take any of the USB gadget changes into the USB tree... > > > > Do you have any comment on this series? > Hi target maintainers, Gentle ping... BR, Thinh
On Fri, Aug 26, 2022, Sebastian Andrzej Siewior wrote: > On 2022-07-18 18:26:01 [-0700], Thinh Nguyen wrote: > > The Linux UASP gadget driver is incomplete and remained broken for a long time. > > It was not implemented for performance either. This series adds some of the > > required features for the UASP driver to work. It also makes some changes to > > the target core. > > Some patches here have fixes: tags and are in the middle of the series. > If they are indeed fixes which are needed for the driver function > regardless of the other changes, which are part of the series, then they > should be moved to the front of series _or_ submitted independently as > in "lets first fix the broken things and then make it pretty". > > All in all I am happy to see that somebody is looking into the target > USB gadget. > Thanks for the reviews! I can move the commits with fixes tag around. But for the driver to work properly against different OSes (and maybe even for Linux), most of the changes without the fixes tags are also needed and not just to make it "pretty". There are still more work for f_tcm, but this series (plus the fixes series in target) is enough for the driver to work properly. Thanks, Thinh
The Linux UASP gadget driver is incomplete and remained broken for a long time. It was not implemented for performance either. This series adds some of the required features for the UASP driver to work. It also makes some changes to the target core. This is tested against UASP CV and DWC_usb3x controller. It still needs some fixes in the target core, which will be separated from this series. There are still more room for performance improvement and fixes. However, this series should be sufficient to bring up a working UASP device. Changes in v2: - Remove most target core changes from this series and only keep the must-have ones - Split the task-management patch to smaller patches - Don't send failure Task Management response to target core, reducing dependency - Add UASP bringup script example in cover page - Make various small updates according to feedbacks Example script ============== To test UASP, here's an example perl script snippet to bring it up. Note: the script was cut down and quickly rewritten, so sorry if I make mistakes. :) my $MY_UAS_VID = xxxx; my $MY_UAS_PID = yyyy; my $SERIAL = "1234"; my $VENDOR = "VENDOR"; my $MY_VER = "VER"; my $vendor_id = "my_vid"; my $product_id = "my_pid"; my $revision = "my_rev"; # Must update: my $backing_storage = "/tmp/some_file"; my $backing_storage_size = 1024*1024*16; my $use_ramdisk = 0; my $g = "/sys/kernel/config/usb_gadget/g1"; system("modprobe libcomposite"); system("modprobe usb_f_tcm"); system("mkdir -p $g"); system("mkdir -p $g/configs/c.1"); system("mkdir -p $g/functions/tcm.0"); system("mkdir -p $g/strings/0x409"); system("mkdir -p $g/configs/c.1/strings/0x409"); my $tp = "/sys/kernel/config/target/usb_gadget/naa.0/tpgt_1"; my $tf; my $ctrl; if ($use_ramdisk) { $tf = "/sys/kernel/config/target/core/rd_mcp_0/ramdisk"; $ctrl = 'rd_pages=524288'; } else { $tf = "/sys/kernel/config/target/core/fileio_0/fileio"; $ctrl = 'fd_dev_name=$backing_storage,fd_dev_size=$backing_storage_size,fd_async_io=1'; } system("mkdir -p /etc/target"); system("mkdir -p $tp"); system("mkdir -p $tf"); system("mkdir -p $tp/lun/lun_0"); system("echo naa.0 > $tp/nexus"); system("echo $ctrl > $tf/control"); system("echo 1 > $tf/attrib/emulate_ua_intlck_ctrl"); system("echo 123 > $tf/wwn/vpd_unit_serial"); system("echo $vendor_id > $tf/wwn/vendor_id"); system("echo $product_id > $tf/wwn/product_id"); system("echo $revision > $tf/wwn/revision"); system("echo 1 > $tf/enable"); system("ln -s $tf $tp/lun/lun_0/virtual_scsi_port"); system("echo 1 > $tp/enable"); system("echo $MY_UAS_PID > $g/idProduct"); system("ln -s $g/functions/tcm.0 $g/configs/c.1"); system("echo $MY_UAS_VID > $g/idVendor"); system("echo $SERIAL > $g/strings/0x409/serialnumber"); system("echo $VENDOR > $g/strings/0x409/manufacturer"); system("echo \"$MY_VER\" > $g/strings/0x409/product"); system("echo \"Conf 1\" > $g/configs/c.1/strings/0x409/configuration"); system("echo super-speed-plus > $g/max_speed"); # Make sure the UDC is available system("echo $my_udc > $g/UDC"); Thinh Nguyen (25): target: Add overlapped response to tmrsp_table target: Add common TMR enum usb: gadget: f_tcm: Increase stream count usb: gadget: f_tcm: Increase bMaxBurst usb: gadget: f_tcm: Don't set static stream_id usb: gadget: f_tcm: Allocate matching number of commands to streams usb: gadget: f_tcm: Limit number of sessions usb: gadget: f_tcm: Handle multiple commands in parallel usb: gadget: f_tcm: Use extra number of commands usb: gadget: f_tcm: Return ATA cmd direction usb: gadget: f_tcm: Execute command on write completion usb: gadget: f_tcm: Minor cleanup redundant code usb: gadget: f_tcm: Don't free command immediately usb: gadget: f_tcm: Translate error to sense usb: gadget: f_tcm: Cleanup unused variable usb: gadget: f_tcm: Update state on data write usb: gadget: f_tcm: Handle abort command usb: gadget: f_tcm: Cleanup requests on ep disable usb: gadget: f_tcm: Decrement command ref count on cleanup usb: gadget: f_tcm: Save CPU ID per command usb: gadget: f_tcm: Get stream by tag usb: gadget: f_tcm: Send sense on cancelled transfer usb: gadget: f_tcm: Handle TASK_MANAGEMENT commands usb: gadget: f_tcm: Check overlapped command usb: gadget: f_tcm: Comply with UAS Task Management requirement drivers/target/target_core_transport.c | 10 + drivers/usb/gadget/function/f_tcm.c | 536 +++++++++++++++++++------ drivers/usb/gadget/function/tcm.h | 20 +- include/target/target_core_base.h | 5 + 4 files changed, 436 insertions(+), 135 deletions(-) base-commit: 88a15fbb47db483d06b12b1ae69f114b96361a96