diff mbox series

[v6,10/21] gunyah: rsc_mgr: Add resource manager RPC core

Message ID 20221026185846.3983888-11-quic_eberman@quicinc.com
State New
Headers show
Series Drivers for gunyah hypervisor | expand

Commit Message

Elliot Berman Oct. 26, 2022, 6:58 p.m. UTC
The resource manager is a special virtual machine which is always
running on a Gunyah system. It provides APIs for creating and destroying
VMs, secure memory management, sharing/lending of memory between VMs,
and setup of inter-VM communication. Calls to the resource manager are
made via message queues.

This patch implements the basic probing and RPC mechanism to make those
API calls. Request/response calls can be made with gh_rm_call.
Drivers can also register to notifications pushed by RM via
gh_rm_register_notifier

Specific API calls that resource manager supports will be implemented in
subsequent patches.

Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
 MAINTAINERS                    |   2 +-
 drivers/virt/gunyah/Kconfig    |  15 +
 drivers/virt/gunyah/Makefile   |   3 +
 drivers/virt/gunyah/rsc_mgr.c  | 602 +++++++++++++++++++++++++++++++++
 drivers/virt/gunyah/rsc_mgr.h  |  34 ++
 include/linux/gunyah_rsc_mgr.h |  26 ++
 6 files changed, 681 insertions(+), 1 deletion(-)
 create mode 100644 drivers/virt/gunyah/rsc_mgr.c
 create mode 100644 drivers/virt/gunyah/rsc_mgr.h
 create mode 100644 include/linux/gunyah_rsc_mgr.h

Comments

Greg Kroah-Hartman Nov. 1, 2022, 6:02 p.m. UTC | #1
On Wed, Oct 26, 2022 at 11:58:35AM -0700, Elliot Berman wrote:
> The resource manager is a special virtual machine which is always
> running on a Gunyah system. It provides APIs for creating and destroying
> VMs, secure memory management, sharing/lending of memory between VMs,
> and setup of inter-VM communication. Calls to the resource manager are
> made via message queues.
> 
> This patch implements the basic probing and RPC mechanism to make those
> API calls. Request/response calls can be made with gh_rm_call.
> Drivers can also register to notifications pushed by RM via
> gh_rm_register_notifier
> 
> Specific API calls that resource manager supports will be implemented in
> subsequent patches.
> 
> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
> ---
>  MAINTAINERS                    |   2 +-
>  drivers/virt/gunyah/Kconfig    |  15 +
>  drivers/virt/gunyah/Makefile   |   3 +
>  drivers/virt/gunyah/rsc_mgr.c  | 602 +++++++++++++++++++++++++++++++++
>  drivers/virt/gunyah/rsc_mgr.h  |  34 ++
>  include/linux/gunyah_rsc_mgr.h |  26 ++
>  6 files changed, 681 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/virt/gunyah/rsc_mgr.c
>  create mode 100644 drivers/virt/gunyah/rsc_mgr.h
>  create mode 100644 include/linux/gunyah_rsc_mgr.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 586539eadd3b..e072a0d2e553 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8945,7 +8945,7 @@ F:	Documentation/virt/gunyah/
>  F:	arch/arm64/gunyah/
>  F:	drivers/mailbox/gunyah-msgq.c
>  F:	drivers/virt/gunyah/
> -F:	include/linux/gunyah.h
> +F:	include/linux/gunyah*.h
>  
>  HABANALABS PCI DRIVER
>  M:	Oded Gabbay <ogabbay@kernel.org>
> diff --git a/drivers/virt/gunyah/Kconfig b/drivers/virt/gunyah/Kconfig
> index 127156a678a6..4de88d80aa7b 100644
> --- a/drivers/virt/gunyah/Kconfig
> +++ b/drivers/virt/gunyah/Kconfig
> @@ -10,3 +10,18 @@ config GUNYAH
>  
>  	  Say Y/M here to enable the drivers needed to interact in a Gunyah
>  	  virtual environment.
> +
> +config GUNYAH_RESORUCE_MANAGER
> +	tristate "Gunyah Resource Manager"
> +	select MAILBOX
> +	select GUNYAH_MESSAGE_QUEUES
> +	depends on GUNYAH
> +	default y

You only have "default y" if your machine can not boot without it.
Please do not add that here.

> +	help
> +	  The resource manager (RM) is a privileged application VM supporting
> +	  the Gunyah Hypervisor. Enable this driver to support communicating
> +	  with Gunyah RM. This is typically required for a VM running under
> +	  Gunyah wanting to have Gunyah-awareness.
> +
> +	  Say Y/M here if unsure.
> +
> diff --git a/drivers/virt/gunyah/Makefile b/drivers/virt/gunyah/Makefile
> index 2ac4ee64b89d..2c18b0a56413 100644
> --- a/drivers/virt/gunyah/Makefile
> +++ b/drivers/virt/gunyah/Makefile
> @@ -1 +1,4 @@
>  obj-$(CONFIG_GUNYAH) += gunyah.o
> +
> +gunyah_rsc_mgr-y += rsc_mgr.o
> +obj-$(CONFIG_GUNYAH_RESORUCE_MANAGER) += gunyah_rsc_mgr.o
> diff --git a/drivers/virt/gunyah/rsc_mgr.c b/drivers/virt/gunyah/rsc_mgr.c
> new file mode 100644
> index 000000000000..a9fde703cbbe
> --- /dev/null
> +++ b/drivers/virt/gunyah/rsc_mgr.c
> @@ -0,0 +1,602 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt) "gh_rsc_mgr: " fmt

This is a driver, you should never need this as you should be using the
dev_*() calls, not pr_*() calls as you always have access to a struct
device, right?

So you can drop this.


> +
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +#include <linux/mutex.h>
> +#include <linux/sched.h>
> +#include <linux/gunyah.h>
> +#include <linux/module.h>
> +#include <linux/of_irq.h>
> +#include <linux/kthread.h>
> +#include <linux/notifier.h>
> +#include <linux/workqueue.h>
> +#include <linux/completion.h>
> +#include <linux/gunyah_rsc_mgr.h>
> +#include <linux/platform_device.h>
> +
> +#include "rsc_mgr.h"
> +
> +/* Resource Manager Header */
> +struct gh_rm_rpc_hdr {
> +	u8 version : 4, hdr_words : 4;
> +	u8 type : 2, fragments : 6;

Ick, that's hard to read.  One variable per line please?

And why the bit packed stuff?  Are you sure this is the way to do this?
Why not use a bitmask instead?

> +	u16 seq;
> +	u32 msg_id;
> +} __packed;
> +
> +/* Standard reply header */
> +struct gh_rm_rpc_reply_hdr {
> +	struct gh_rm_rpc_hdr rpc_hdr;
> +	u32 err_code;
> +} __packed;
> +
> +/* RPC Header versions */
> +#define GH_RM_RPC_HDR_VERSION_ONE	0x1
> +
> +/* RPC Header words */
> +#define GH_RM_RPC_HDR_WORDS		0x2
> +
> +/* RPC Message types */
> +#define GH_RM_RPC_TYPE_CONT		0x0
> +#define GH_RM_RPC_TYPE_REQ		0x1
> +#define GH_RM_RPC_TYPE_RPLY		0x2
> +#define GH_RM_RPC_TYPE_NOTIF		0x3
> +
> +#define GH_RM_MAX_NUM_FRAGMENTS		62
> +
> +#define GH_RM_MAX_MSG_SIZE	(GH_MSGQ_MAX_MSG_SIZE - sizeof(struct gh_rm_rpc_hdr))
> +
> +/**
> + * struct gh_rm_connection - Represents a complete message from resource manager
> + * @payload: Combined payload of all the fragments (msg headers stripped off).
> + * @size: Size of the payload.
> + * @ret: Linux return code, set in case there was an error processing connection
> + * @msg_id: Message ID from the header.
> + * @type: GH_RM_RPC_TYPE_RPLY or GH_RM_RPC_TYPE_NOTIF.
> + * @num_fragments: total number of fragments expected to be received.
> + * @fragments_received: fragments received so far.
> + * @rm_error: For request/reply sequences with standard replies.
> + * @seq: Sequence ID for the main message.
> + * @seq_done: Signals caller that the RM reply has been received
> + */
> +struct gh_rm_connection {
> +	void *payload;
> +	size_t size;
> +	int ret;
> +	u32 msg_id;
> +	u8 type;
> +
> +	u8 num_fragments;
> +	u8 fragments_received;
> +
> +	/* only for req/reply sequence */
> +	u32 rm_error;
> +	u16 seq;
> +	struct completion seq_done;
> +};
> +
> +struct gh_rm_notif_complete {
> +	struct gh_rm_connection *conn;
> +	struct work_struct work;
> +};
> +
> +struct gh_rsc_mgr {
> +	struct gunyah_resource tx_ghrsc, rx_ghrsc;
> +	struct gh_msgq msgq;
> +	struct mbox_client msgq_client;
> +	struct gh_rm_connection *active_rx_connection;
> +	int last_tx_ret;
> +
> +	struct idr call_idr;
> +	struct mutex call_idr_lock;
> +
> +	struct mutex send_lock;
> +
> +	struct work_struct recv_work;
> +};
> +
> +static struct gh_rsc_mgr *__rsc_mgr;

Sorry, no, you don't get to just limit yourself to one of these.  Please
make this properly handle any number of "resource managers", static
variables like this is not ok.

> +SRCU_NOTIFIER_HEAD_STATIC(gh_rm_notifier);

Why do you need a notifier list?

Who will register for this?  For what?  Why?

> +static int gh_rm_drv_probe(struct platform_device *pdev)
> +{
> +	struct gh_rsc_mgr *rsc_mgr;
> +	int ret;
> +
> +	rsc_mgr = devm_kzalloc(&pdev->dev, sizeof(*rsc_mgr), GFP_KERNEL);
> +	if (!rsc_mgr)
> +		return -ENOMEM;
> +	platform_set_drvdata(pdev, rsc_mgr);
> +
> +	mutex_init(&rsc_mgr->call_idr_lock);
> +	idr_init(&rsc_mgr->call_idr);
> +	mutex_init(&rsc_mgr->send_lock);
> +
> +	ret = gh_msgq_platform_probe_direction(pdev, GUNYAH_RESOURCE_TYPE_MSGQ_TX, 0,
> +						&rsc_mgr->tx_ghrsc);
> +	if (ret)
> +		return ret;
> +
> +	ret = gh_msgq_platform_probe_direction(pdev, GUNYAH_RESOURCE_TYPE_MSGQ_RX, 1,
> +						&rsc_mgr->rx_ghrsc);
> +	if (ret)
> +		return ret;
> +
> +	rsc_mgr->msgq_client.dev = &pdev->dev;

So your client device is the platform device, and not a new bridge
device that you create instead?  Why?


> +	rsc_mgr->msgq_client.tx_block = true;
> +	rsc_mgr->msgq_client.rx_callback = gh_rm_msgq_rx_data;
> +	rsc_mgr->msgq_client.tx_done = gh_rm_msgq_tx_done;
> +
> +	ret = gh_msgq_init(&pdev->dev, &rsc_mgr->msgq, &rsc_mgr->msgq_client,
> +				&rsc_mgr->tx_ghrsc, &rsc_mgr->rx_ghrsc);
> +	if (ret)
> +		return ret;
> +
> +	__rsc_mgr = rsc_mgr;
> +
> +	return 0;
> +}
> +static struct platform_driver gh_rm_driver = {
> +	.probe = gh_rm_drv_probe,
> +	.remove = gh_rm_drv_remove,
> +	.driver = {
> +		.name = "gh_rsc_mgr",
> +		.of_match_table = gh_rm_of_match,
> +	},

Wait, why is this a platform driver?  This is binding to a real device
on a real bus, not a random platform description in DT, right?

Or is it controlled by your DT?  I can't figure that out here, sorry.

thanks,

greg k-h
Elliot Berman Nov. 2, 2022, 12:12 a.m. UTC | #2
On 11/1/2022 11:02 AM, Greg Kroah-Hartman wrote:
> On Wed, Oct 26, 2022 at 11:58:35AM -0700, Elliot Berman wrote:
>> The resource manager is a special virtual machine which is always
>> running on a Gunyah system. It provides APIs for creating and destroying
>> VMs, secure memory management, sharing/lending of memory between VMs,
>> and setup of inter-VM communication. Calls to the resource manager are
>> made via message queues.
>>
>> This patch implements the basic probing and RPC mechanism to make those
>> API calls. Request/response calls can be made with gh_rm_call.
>> Drivers can also register to notifications pushed by RM via
>> gh_rm_register_notifier
>>
>> Specific API calls that resource manager supports will be implemented in
>> subsequent patches.
>>
>> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
>> ---
>>   MAINTAINERS                    |   2 +-
>>   drivers/virt/gunyah/Kconfig    |  15 +
>>   drivers/virt/gunyah/Makefile   |   3 +
>>   drivers/virt/gunyah/rsc_mgr.c  | 602 +++++++++++++++++++++++++++++++++
>>   drivers/virt/gunyah/rsc_mgr.h  |  34 ++
>>   include/linux/gunyah_rsc_mgr.h |  26 ++
>>   6 files changed, 681 insertions(+), 1 deletion(-)
>>   create mode 100644 drivers/virt/gunyah/rsc_mgr.c
>>   create mode 100644 drivers/virt/gunyah/rsc_mgr.h
>>   create mode 100644 include/linux/gunyah_rsc_mgr.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 586539eadd3b..e072a0d2e553 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -8945,7 +8945,7 @@ F:	Documentation/virt/gunyah/
>>   F:	arch/arm64/gunyah/
>>   F:	drivers/mailbox/gunyah-msgq.c
>>   F:	drivers/virt/gunyah/
>> -F:	include/linux/gunyah.h
>> +F:	include/linux/gunyah*.h
>>   
>>   HABANALABS PCI DRIVER
>>   M:	Oded Gabbay <ogabbay@kernel.org>
>> diff --git a/drivers/virt/gunyah/Kconfig b/drivers/virt/gunyah/Kconfig
>> index 127156a678a6..4de88d80aa7b 100644
>> --- a/drivers/virt/gunyah/Kconfig
>> +++ b/drivers/virt/gunyah/Kconfig
>> @@ -10,3 +10,18 @@ config GUNYAH
>>   
>>   	  Say Y/M here to enable the drivers needed to interact in a Gunyah
>>   	  virtual environment.
>> +
>> +config GUNYAH_RESORUCE_MANAGER
>> +	tristate "Gunyah Resource Manager"
>> +	select MAILBOX
>> +	select GUNYAH_MESSAGE_QUEUES
>> +	depends on GUNYAH
>> +	default y
> 
> You only have "default y" if your machine can not boot without it.
> Please do not add that here.
> 

There's a guideline in Documentation/kbuild/kconfig-language.rst to 
provide some sane defaults for subdriver behavior. Here, CONFIG_GUNYAH 
is default n. It's unlikely for someone to want to have Linux with base 
Gunyah support (hypercalls and hypervisor detection) without also having 
the Resource Manager driver. If it's better, I could change to default m?

>> +	help
>> +	  The resource manager (RM) is a privileged application VM supporting
>> +	  the Gunyah Hypervisor. Enable this driver to support communicating
>> +	  with Gunyah RM. This is typically required for a VM running under
>> +	  Gunyah wanting to have Gunyah-awareness.
>> +
>> +	  Say Y/M here if unsure.
>> +
>> diff --git a/drivers/virt/gunyah/Makefile b/drivers/virt/gunyah/Makefile
>> index 2ac4ee64b89d..2c18b0a56413 100644
>> --- a/drivers/virt/gunyah/Makefile
>> +++ b/drivers/virt/gunyah/Makefile
>> @@ -1 +1,4 @@
>>   obj-$(CONFIG_GUNYAH) += gunyah.o
>> +
>> +gunyah_rsc_mgr-y += rsc_mgr.o
>> +obj-$(CONFIG_GUNYAH_RESORUCE_MANAGER) += gunyah_rsc_mgr.o
>> diff --git a/drivers/virt/gunyah/rsc_mgr.c b/drivers/virt/gunyah/rsc_mgr.c
>> new file mode 100644
>> index 000000000000..a9fde703cbbe
>> --- /dev/null
>> +++ b/drivers/virt/gunyah/rsc_mgr.c
>> @@ -0,0 +1,602 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#define pr_fmt(fmt) "gh_rsc_mgr: " fmt
> 
> This is a driver, you should never need this as you should be using the
> dev_*() calls, not pr_*() calls as you always have access to a struct
> device, right?
> 
> So you can drop this.
> 
> 

Ack

>> +
>> +#include <linux/of.h>
>> +#include <linux/slab.h>
>> +#include <linux/mutex.h>
>> +#include <linux/sched.h>
>> +#include <linux/gunyah.h>
>> +#include <linux/module.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/kthread.h>
>> +#include <linux/notifier.h>
>> +#include <linux/workqueue.h>
>> +#include <linux/completion.h>
>> +#include <linux/gunyah_rsc_mgr.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "rsc_mgr.h"
>> +
>> +/* Resource Manager Header */
>> +struct gh_rm_rpc_hdr {
>> +	u8 version : 4, hdr_words : 4;
>> +	u8 type : 2, fragments : 6;
> 
> Ick, that's hard to read.  One variable per line please?

Ack.

> And why the bit packed stuff?  Are you sure this is the way to do this?
> Why not use a bitmask instead?
> 

I felt bit packed implementation is cleaner and easier to map to 
understanding what the fields are used for.

>> +	u16 seq;
>> +	u32 msg_id;
>> +} __packed;
>> +
>> +/* Standard reply header */
>> +struct gh_rm_rpc_reply_hdr {
>> +	struct gh_rm_rpc_hdr rpc_hdr;
>> +	u32 err_code;
>> +} __packed;
>> +
>> +/* RPC Header versions */
>> +#define GH_RM_RPC_HDR_VERSION_ONE	0x1
>> +
>> +/* RPC Header words */
>> +#define GH_RM_RPC_HDR_WORDS		0x2
>> +
>> +/* RPC Message types */
>> +#define GH_RM_RPC_TYPE_CONT		0x0
>> +#define GH_RM_RPC_TYPE_REQ		0x1
>> +#define GH_RM_RPC_TYPE_RPLY		0x2
>> +#define GH_RM_RPC_TYPE_NOTIF		0x3
>> +
>> +#define GH_RM_MAX_NUM_FRAGMENTS		62
>> +
>> +#define GH_RM_MAX_MSG_SIZE	(GH_MSGQ_MAX_MSG_SIZE - sizeof(struct gh_rm_rpc_hdr))
>> +
>> +/**
>> + * struct gh_rm_connection - Represents a complete message from resource manager
>> + * @payload: Combined payload of all the fragments (msg headers stripped off).
>> + * @size: Size of the payload.
>> + * @ret: Linux return code, set in case there was an error processing connection
>> + * @msg_id: Message ID from the header.
>> + * @type: GH_RM_RPC_TYPE_RPLY or GH_RM_RPC_TYPE_NOTIF.
>> + * @num_fragments: total number of fragments expected to be received.
>> + * @fragments_received: fragments received so far.
>> + * @rm_error: For request/reply sequences with standard replies.
>> + * @seq: Sequence ID for the main message.
>> + * @seq_done: Signals caller that the RM reply has been received
>> + */
>> +struct gh_rm_connection {
>> +	void *payload;
>> +	size_t size;
>> +	int ret;
>> +	u32 msg_id;
>> +	u8 type;
>> +
>> +	u8 num_fragments;
>> +	u8 fragments_received;
>> +
>> +	/* only for req/reply sequence */
>> +	u32 rm_error;
>> +	u16 seq;
>> +	struct completion seq_done;
>> +};
>> +
>> +struct gh_rm_notif_complete {
>> +	struct gh_rm_connection *conn;
>> +	struct work_struct work;
>> +};
>> +
>> +struct gh_rsc_mgr {
>> +	struct gunyah_resource tx_ghrsc, rx_ghrsc;
>> +	struct gh_msgq msgq;
>> +	struct mbox_client msgq_client;
>> +	struct gh_rm_connection *active_rx_connection;
>> +	int last_tx_ret;
>> +
>> +	struct idr call_idr;
>> +	struct mutex call_idr_lock;
>> +
>> +	struct mutex send_lock;
>> +
>> +	struct work_struct recv_work;
>> +};
>> +
>> +static struct gh_rsc_mgr *__rsc_mgr;
> 
> Sorry, no, you don't get to just limit yourself to one of these.  Please
> make this properly handle any number of "resource managers", static
> variables like this is not ok.
> 

There will only ever be one resource manager. optee, psci, and qcom_scm 
use a similar approach.

>> +SRCU_NOTIFIER_HEAD_STATIC(gh_rm_notifier);
> 
> Why do you need a notifier list?
> 
> Who will register for this?  For what?  Why?
> 

The majority of notifications that RM sends to Linux will be related to 
VM state, e.g. "VM crashed." I've not added the handling in VM manager 
yet to reduce the number of patches in this series. It was used in the 
previous series for the console driver. I can remove for now and 
re-introduce it once VM manager makes use?

>> +static int gh_rm_drv_probe(struct platform_device *pdev)
>> +{
>> +	struct gh_rsc_mgr *rsc_mgr;
>> +	int ret;
>> +
>> +	rsc_mgr = devm_kzalloc(&pdev->dev, sizeof(*rsc_mgr), GFP_KERNEL);
>> +	if (!rsc_mgr)
>> +		return -ENOMEM;
>> +	platform_set_drvdata(pdev, rsc_mgr);
>> +
>> +	mutex_init(&rsc_mgr->call_idr_lock);
>> +	idr_init(&rsc_mgr->call_idr);
>> +	mutex_init(&rsc_mgr->send_lock);
>> +
>> +	ret = gh_msgq_platform_probe_direction(pdev, GUNYAH_RESOURCE_TYPE_MSGQ_TX, 0,
>> +						&rsc_mgr->tx_ghrsc);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = gh_msgq_platform_probe_direction(pdev, GUNYAH_RESOURCE_TYPE_MSGQ_RX, 1,
>> +						&rsc_mgr->rx_ghrsc);
>> +	if (ret)
>> +		return ret;
>> +
>> +	rsc_mgr->msgq_client.dev = &pdev->dev;
> 
> So your client device is the platform device, and not a new bridge
> device that you create instead?  Why?
> 

Answered below

>> +	rsc_mgr->msgq_client.tx_block = true;
>> +	rsc_mgr->msgq_client.rx_callback = gh_rm_msgq_rx_data;
>> +	rsc_mgr->msgq_client.tx_done = gh_rm_msgq_tx_done;
>> +
>> +	ret = gh_msgq_init(&pdev->dev, &rsc_mgr->msgq, &rsc_mgr->msgq_client,
>> +				&rsc_mgr->tx_ghrsc, &rsc_mgr->rx_ghrsc);
>> +	if (ret)
>> +		return ret;
>> +
>> +	__rsc_mgr = rsc_mgr;
>> +
>> +	return 0;
>> +}
>> +static struct platform_driver gh_rm_driver = {
>> +	.probe = gh_rm_drv_probe,
>> +	.remove = gh_rm_drv_remove,
>> +	.driver = {
>> +		.name = "gh_rsc_mgr",
>> +		.of_match_table = gh_rm_of_match,
>> +	},
> 
> Wait, why is this a platform driver?  This is binding to a real device
> on a real bus, not a random platform description in DT, right?

This a binding for a real device and not a "random platform description" 
in DT to get the driver probed.

> Or is it controlled by your DT?  I can't figure that out here, sorry.

There is some info in Patch 2 about why the DT node exists and how it 
looks. Essentially, The DT node is provided by Gunyah during boot and 
describes how Linux can communicate with resource manager.

Thanks,
Elliot
Greg Kroah-Hartman Nov. 2, 2022, 2:53 a.m. UTC | #3
On Tue, Nov 01, 2022 at 05:12:58PM -0700, Elliot Berman wrote:
> 
> 
> On 11/1/2022 11:02 AM, Greg Kroah-Hartman wrote:
> > On Wed, Oct 26, 2022 at 11:58:35AM -0700, Elliot Berman wrote:
> > > The resource manager is a special virtual machine which is always
> > > running on a Gunyah system. It provides APIs for creating and destroying
> > > VMs, secure memory management, sharing/lending of memory between VMs,
> > > and setup of inter-VM communication. Calls to the resource manager are
> > > made via message queues.
> > > 
> > > This patch implements the basic probing and RPC mechanism to make those
> > > API calls. Request/response calls can be made with gh_rm_call.
> > > Drivers can also register to notifications pushed by RM via
> > > gh_rm_register_notifier
> > > 
> > > Specific API calls that resource manager supports will be implemented in
> > > subsequent patches.
> > > 
> > > Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
> > > ---
> > >   MAINTAINERS                    |   2 +-
> > >   drivers/virt/gunyah/Kconfig    |  15 +
> > >   drivers/virt/gunyah/Makefile   |   3 +
> > >   drivers/virt/gunyah/rsc_mgr.c  | 602 +++++++++++++++++++++++++++++++++
> > >   drivers/virt/gunyah/rsc_mgr.h  |  34 ++
> > >   include/linux/gunyah_rsc_mgr.h |  26 ++
> > >   6 files changed, 681 insertions(+), 1 deletion(-)
> > >   create mode 100644 drivers/virt/gunyah/rsc_mgr.c
> > >   create mode 100644 drivers/virt/gunyah/rsc_mgr.h
> > >   create mode 100644 include/linux/gunyah_rsc_mgr.h
> > > 
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 586539eadd3b..e072a0d2e553 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -8945,7 +8945,7 @@ F:	Documentation/virt/gunyah/
> > >   F:	arch/arm64/gunyah/
> > >   F:	drivers/mailbox/gunyah-msgq.c
> > >   F:	drivers/virt/gunyah/
> > > -F:	include/linux/gunyah.h
> > > +F:	include/linux/gunyah*.h
> > >   HABANALABS PCI DRIVER
> > >   M:	Oded Gabbay <ogabbay@kernel.org>
> > > diff --git a/drivers/virt/gunyah/Kconfig b/drivers/virt/gunyah/Kconfig
> > > index 127156a678a6..4de88d80aa7b 100644
> > > --- a/drivers/virt/gunyah/Kconfig
> > > +++ b/drivers/virt/gunyah/Kconfig
> > > @@ -10,3 +10,18 @@ config GUNYAH
> > >   	  Say Y/M here to enable the drivers needed to interact in a Gunyah
> > >   	  virtual environment.
> > > +
> > > +config GUNYAH_RESORUCE_MANAGER
> > > +	tristate "Gunyah Resource Manager"
> > > +	select MAILBOX
> > > +	select GUNYAH_MESSAGE_QUEUES
> > > +	depends on GUNYAH
> > > +	default y
> > 
> > You only have "default y" if your machine can not boot without it.
> > Please do not add that here.
> > 
> 
> There's a guideline in Documentation/kbuild/kconfig-language.rst to provide
> some sane defaults for subdriver behavior. Here, CONFIG_GUNYAH is default n.
> It's unlikely for someone to want to have Linux with base Gunyah support
> (hypercalls and hypervisor detection) without also having the Resource
> Manager driver. If it's better, I could change to default m?

Why is this a separate build option at all anyway?  If you want
CONFIG_GUNYAH why would you ever turn this off?  So why even allow it to
be an option?  Just always built it depending on the main option.

> > > +/* Resource Manager Header */
> > > +struct gh_rm_rpc_hdr {
> > > +	u8 version : 4, hdr_words : 4;
> > > +	u8 type : 2, fragments : 6;
> > 
> > Ick, that's hard to read.  One variable per line please?
> 
> Ack.
> 
> > And why the bit packed stuff?  Are you sure this is the way to do this?
> > Why not use a bitmask instead?
> > 
> 
> I felt bit packed implementation is cleaner and easier to map to
> understanding what the fields are used for.

Ah, so this isn't what is on the "wire", then don't use a bitfield like
this, use a real variable and that will be faster and simpler to
understand.

> > > +static struct gh_rsc_mgr *__rsc_mgr;
> > 
> > Sorry, no, you don't get to just limit yourself to one of these.  Please
> > make this properly handle any number of "resource managers", static
> > variables like this is not ok.
> > 
> 
> There will only ever be one resource manager. optee, psci, and qcom_scm use
> a similar approach.

And all of those are also wrong.

There is no need for this variable at all, you are doing extra work to
make this a "single" device.  Just always work off of the device that
the driver core gave you and all is good and you will have no limits on
how many different ones you eventually get.  It will be less code
overall, so it's the right thing to do.

> > > +SRCU_NOTIFIER_HEAD_STATIC(gh_rm_notifier);
> > 
> > Why do you need a notifier list?
> > 
> > Who will register for this?  For what?  Why?
> > 
> 
> The majority of notifications that RM sends to Linux will be related to VM
> state, e.g. "VM crashed." I've not added the handling in VM manager yet to
> reduce the number of patches in this series. It was used in the previous
> series for the console driver. I can remove for now and re-introduce it once
> VM manager makes use?

Please remove if you are not using it.  Notifier lists are almost always
wrong when it comes to the driver model, so please don't add them now,
we can discuss it later if you feel it really needs to be introduced
then.

> > > +static struct platform_driver gh_rm_driver = {
> > > +	.probe = gh_rm_drv_probe,
> > > +	.remove = gh_rm_drv_remove,
> > > +	.driver = {
> > > +		.name = "gh_rsc_mgr",
> > > +		.of_match_table = gh_rm_of_match,
> > > +	},
> > 
> > Wait, why is this a platform driver?  This is binding to a real device
> > on a real bus, not a random platform description in DT, right?
> 
> This a binding for a real device and not a "random platform description" in
> DT to get the driver probed.
> 
> > Or is it controlled by your DT?  I can't figure that out here, sorry.
> 
> There is some info in Patch 2 about why the DT node exists and how it looks.
> Essentially, The DT node is provided by Gunyah during boot and describes how
> Linux can communicate with resource manager.

Ick, ok, for now let's leave this alone but for dynamic devices, you
should never use a platform device.  All devices that hang off of this
controller better not be platform devices, but belong to the bus type of
your new bus, right?

thanks,

greg k-h
Elliot Berman Nov. 2, 2022, 6:04 p.m. UTC | #4
On 11/1/2022 7:53 PM, Greg Kroah-Hartman wrote:
> On Tue, Nov 01, 2022 at 05:12:58PM -0700, Elliot Berman wrote:
>>
>>
>> On 11/1/2022 11:02 AM, Greg Kroah-Hartman wrote:
>>> On Wed, Oct 26, 2022 at 11:58:35AM -0700, Elliot Berman wrote:
>>>> The resource manager is a special virtual machine which is always
>>>> running on a Gunyah system. It provides APIs for creating and destroying
>>>> VMs, secure memory management, sharing/lending of memory between VMs,
>>>> and setup of inter-VM communication. Calls to the resource manager are
>>>> made via message queues.
>>>>
>>>> This patch implements the basic probing and RPC mechanism to make those
>>>> API calls. Request/response calls can be made with gh_rm_call.
>>>> Drivers can also register to notifications pushed by RM via
>>>> gh_rm_register_notifier
>>>>
>>>> Specific API calls that resource manager supports will be implemented in
>>>> subsequent patches.
>>>>
>>>> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
>>>> ---
>>>>    MAINTAINERS                    |   2 +-
>>>>    drivers/virt/gunyah/Kconfig    |  15 +
>>>>    drivers/virt/gunyah/Makefile   |   3 +
>>>>    drivers/virt/gunyah/rsc_mgr.c  | 602 +++++++++++++++++++++++++++++++++
>>>>    drivers/virt/gunyah/rsc_mgr.h  |  34 ++
>>>>    include/linux/gunyah_rsc_mgr.h |  26 ++
>>>>    6 files changed, 681 insertions(+), 1 deletion(-)
>>>>    create mode 100644 drivers/virt/gunyah/rsc_mgr.c
>>>>    create mode 100644 drivers/virt/gunyah/rsc_mgr.h
>>>>    create mode 100644 include/linux/gunyah_rsc_mgr.h
>>>>
>>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>>> index 586539eadd3b..e072a0d2e553 100644
>>>> --- a/MAINTAINERS
>>>> +++ b/MAINTAINERS
>>>> @@ -8945,7 +8945,7 @@ F:	Documentation/virt/gunyah/
>>>>    F:	arch/arm64/gunyah/
>>>>    F:	drivers/mailbox/gunyah-msgq.c
>>>>    F:	drivers/virt/gunyah/
>>>> -F:	include/linux/gunyah.h
>>>> +F:	include/linux/gunyah*.h
>>>>    HABANALABS PCI DRIVER
>>>>    M:	Oded Gabbay <ogabbay@kernel.org>
>>>> diff --git a/drivers/virt/gunyah/Kconfig b/drivers/virt/gunyah/Kconfig
>>>> index 127156a678a6..4de88d80aa7b 100644
>>>> --- a/drivers/virt/gunyah/Kconfig
>>>> +++ b/drivers/virt/gunyah/Kconfig
>>>> @@ -10,3 +10,18 @@ config GUNYAH
>>>>    	  Say Y/M here to enable the drivers needed to interact in a Gunyah
>>>>    	  virtual environment.
>>>> +
>>>> +config GUNYAH_RESORUCE_MANAGER
>>>> +	tristate "Gunyah Resource Manager"
>>>> +	select MAILBOX
>>>> +	select GUNYAH_MESSAGE_QUEUES
>>>> +	depends on GUNYAH
>>>> +	default y
>>>
>>> You only have "default y" if your machine can not boot without it.
>>> Please do not add that here.
>>>
>>
>> There's a guideline in Documentation/kbuild/kconfig-language.rst to provide
>> some sane defaults for subdriver behavior. Here, CONFIG_GUNYAH is default n.
>> It's unlikely for someone to want to have Linux with base Gunyah support
>> (hypercalls and hypervisor detection) without also having the Resource
>> Manager driver. If it's better, I could change to default m?
> 
> Why is this a separate build option at all anyway?  If you want
> CONFIG_GUNYAH why would you ever turn this off?  So why even allow it to
> be an option?  Just always built it depending on the main option.
> 

Ack.

I'll also end up removing CONFIG_GUNYAH_MESSAGE_QUEUES from patch 9 as well.

>>>> +/* Resource Manager Header */
>>>> +struct gh_rm_rpc_hdr {
>>>> +	u8 version : 4, hdr_words : 4;
>>>> +	u8 type : 2, fragments : 6;
>>>
>>> Ick, that's hard to read.  One variable per line please?
>>
>> Ack.
>>
>>> And why the bit packed stuff?  Are you sure this is the way to do this?
>>> Why not use a bitmask instead?
>>>
>>
>> I felt bit packed implementation is cleaner and easier to map to
>> understanding what the fields are used for.
> 
> Ah, so this isn't what is on the "wire", then don't use a bitfield like
> this, use a real variable and that will be faster and simpler to
> understand.
> 

This is what's on the "wire". Whether I use bitfield or bit packed would 
be functionally the same and is just a cosmetic change IMO.

>>>> +static struct gh_rsc_mgr *__rsc_mgr;
>>>
>>> Sorry, no, you don't get to just limit yourself to one of these.  Please
>>> make this properly handle any number of "resource managers", static
>>> variables like this is not ok.
>>>
>>
>> There will only ever be one resource manager. optee, psci, and qcom_scm use
>> a similar approach.
> 
> And all of those are also wrong.
> 
> There is no need for this variable at all, you are doing extra work to
> make this a "single" device.  Just always work off of the device that
> the driver core gave you and all is good and you will have no limits on
> how many different ones you eventually get.  It will be less code
> overall, so it's the right thing to do.
> 

Ack

>>>> +SRCU_NOTIFIER_HEAD_STATIC(gh_rm_notifier);
>>>
>>> Why do you need a notifier list?
>>>
>>> Who will register for this?  For what?  Why?
>>>
>>
>> The majority of notifications that RM sends to Linux will be related to VM
>> state, e.g. "VM crashed." I've not added the handling in VM manager yet to
>> reduce the number of patches in this series. It was used in the previous
>> series for the console driver. I can remove for now and re-introduce it once
>> VM manager makes use?
> 
> Please remove if you are not using it.  Notifier lists are almost always
> wrong when it comes to the driver model, so please don't add them now,
> we can discuss it later if you feel it really needs to be introduced
> then.
> 

Ack

>>>> +static struct platform_driver gh_rm_driver = {
>>>> +	.probe = gh_rm_drv_probe,
>>>> +	.remove = gh_rm_drv_remove,
>>>> +	.driver = {
>>>> +		.name = "gh_rsc_mgr",
>>>> +		.of_match_table = gh_rm_of_match,
>>>> +	},
>>>
>>> Wait, why is this a platform driver?  This is binding to a real device
>>> on a real bus, not a random platform description in DT, right?
>>
>> This a binding for a real device and not a "random platform description" in
>> DT to get the driver probed.
>>
>>> Or is it controlled by your DT?  I can't figure that out here, sorry.
>>
>> There is some info in Patch 2 about why the DT node exists and how it looks.
>> Essentially, The DT node is provided by Gunyah during boot and describes how
>> Linux can communicate with resource manager.
> 
> Ick, ok, for now let's leave this alone but for dynamic devices, you
> should never use a platform device.  All devices that hang off of this
> controller better not be platform devices, but belong to the bus type of
> your new bus, right?
> 

That's correct.
Greg Kroah-Hartman Nov. 3, 2022, 12:22 a.m. UTC | #5
On Wed, Nov 02, 2022 at 11:04:45AM -0700, Elliot Berman wrote:
> > > > > +/* Resource Manager Header */
> > > > > +struct gh_rm_rpc_hdr {
> > > > > +	u8 version : 4, hdr_words : 4;
> > > > > +	u8 type : 2, fragments : 6;
> > > > 
> > > > Ick, that's hard to read.  One variable per line please?
> > > 
> > > Ack.
> > > 
> > > > And why the bit packed stuff?  Are you sure this is the way to do this?
> > > > Why not use a bitmask instead?
> > > > 
> > > 
> > > I felt bit packed implementation is cleaner and easier to map to
> > > understanding what the fields are used for.
> > 
> > Ah, so this isn't what is on the "wire", then don't use a bitfield like
> > this, use a real variable and that will be faster and simpler to
> > understand.
> > 
> 
> This is what's on the "wire". Whether I use bitfield or bit packed would be
> functionally the same and is just a cosmetic change IMO.

Ah, that wasn't obvious at all.

Usually using bitfields like this for "wire" protocols is not a good
idea (endian issues and all of that.)  Please use a bitmask instead, as
that way you know exactly what is happening, and the compiler can
usually generate much better code overall.

And as this is on the wire, please specify the endian values, _AND_ use
the proper kernel types for stuff that goes between user/kernel or
kernel/hardware, as you are not doing that here.

thanks,

greg k-h
Elliot Berman Nov. 3, 2022, 10:07 p.m. UTC | #6
On 11/2/2022 5:22 PM, Greg Kroah-Hartman wrote:
> On Wed, Nov 02, 2022 at 11:04:45AM -0700, Elliot Berman wrote:
>>>>>> +/* Resource Manager Header */
>>>>>> +struct gh_rm_rpc_hdr {
>>>>>> +	u8 version : 4, hdr_words : 4;
>>>>>> +	u8 type : 2, fragments : 6;
>>>>>
>>>>> Ick, that's hard to read.  One variable per line please?
>>>>
>>>> Ack.
>>>>
>>>>> And why the bit packed stuff?  Are you sure this is the way to do this?
>>>>> Why not use a bitmask instead?
>>>>>
>>>>
>>>> I felt bit packed implementation is cleaner and easier to map to
>>>> understanding what the fields are used for.
>>>
>>> Ah, so this isn't what is on the "wire", then don't use a bitfield like
>>> this, use a real variable and that will be faster and simpler to
>>> understand.
>>>
>>
>> This is what's on the "wire". Whether I use bitfield or bit packed would be
>> functionally the same and is just a cosmetic change IMO.
> 
> Ah, that wasn't obvious at all.
> 
> Usually using bitfields like this for "wire" protocols is not a good
> idea (endian issues and all of that.)  Please use a bitmask instead, as
> that way you know exactly what is happening, and the compiler can
> usually generate much better code overall.
> 
> And as this is on the wire, please specify the endian values, _AND_ use
> the proper kernel types for stuff that goes between user/kernel or
> kernel/hardware, as you are not doing that here.

Ack
Elliot Berman Nov. 3, 2022, 10:09 p.m. UTC | #7
On 11/2/2022 5:22 PM, Greg Kroah-Hartman wrote:
> On Wed, Nov 02, 2022 at 11:04:45AM -0700, Elliot Berman wrote:
>>>>>> +/* Resource Manager Header */
>>>>>> +struct gh_rm_rpc_hdr {
>>>>>> +	u8 version : 4, hdr_words : 4;
>>>>>> +	u8 type : 2, fragments : 6;
>>>>>
>>>>> Ick, that's hard to read.  One variable per line please?
>>>>
>>>> Ack.
>>>>
>>>>> And why the bit packed stuff?  Are you sure this is the way to do this?
>>>>> Why not use a bitmask instead?
>>>>>
>>>>
>>>> I felt bit packed implementation is cleaner and easier to map to
>>>> understanding what the fields are used for.
>>>
>>> Ah, so this isn't what is on the "wire", then don't use a bitfield like
>>> this, use a real variable and that will be faster and simpler to
>>> understand.
>>>
>>
>> This is what's on the "wire". Whether I use bitfield or bit packed would be
>> functionally the same and is just a cosmetic change IMO.
> 
> Ah, that wasn't obvious at all.
> 
> Usually using bitfields like this for "wire" protocols is not a good
> idea (endian issues and all of that.)  Please use a bitmask instead, as
> that way you know exactly what is happening, and the compiler can
> usually generate much better code overall.
> 
> And as this is on the wire, please specify the endian values, _AND_ use
> the proper kernel types for stuff that goes between user/kernel or
> kernel/hardware, as you are not doing that here.

Ack
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 586539eadd3b..e072a0d2e553 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8945,7 +8945,7 @@  F:	Documentation/virt/gunyah/
 F:	arch/arm64/gunyah/
 F:	drivers/mailbox/gunyah-msgq.c
 F:	drivers/virt/gunyah/
-F:	include/linux/gunyah.h
+F:	include/linux/gunyah*.h
 
 HABANALABS PCI DRIVER
 M:	Oded Gabbay <ogabbay@kernel.org>
diff --git a/drivers/virt/gunyah/Kconfig b/drivers/virt/gunyah/Kconfig
index 127156a678a6..4de88d80aa7b 100644
--- a/drivers/virt/gunyah/Kconfig
+++ b/drivers/virt/gunyah/Kconfig
@@ -10,3 +10,18 @@  config GUNYAH
 
 	  Say Y/M here to enable the drivers needed to interact in a Gunyah
 	  virtual environment.
+
+config GUNYAH_RESORUCE_MANAGER
+	tristate "Gunyah Resource Manager"
+	select MAILBOX
+	select GUNYAH_MESSAGE_QUEUES
+	depends on GUNYAH
+	default y
+	help
+	  The resource manager (RM) is a privileged application VM supporting
+	  the Gunyah Hypervisor. Enable this driver to support communicating
+	  with Gunyah RM. This is typically required for a VM running under
+	  Gunyah wanting to have Gunyah-awareness.
+
+	  Say Y/M here if unsure.
+
diff --git a/drivers/virt/gunyah/Makefile b/drivers/virt/gunyah/Makefile
index 2ac4ee64b89d..2c18b0a56413 100644
--- a/drivers/virt/gunyah/Makefile
+++ b/drivers/virt/gunyah/Makefile
@@ -1 +1,4 @@ 
 obj-$(CONFIG_GUNYAH) += gunyah.o
+
+gunyah_rsc_mgr-y += rsc_mgr.o
+obj-$(CONFIG_GUNYAH_RESORUCE_MANAGER) += gunyah_rsc_mgr.o
diff --git a/drivers/virt/gunyah/rsc_mgr.c b/drivers/virt/gunyah/rsc_mgr.c
new file mode 100644
index 000000000000..a9fde703cbbe
--- /dev/null
+++ b/drivers/virt/gunyah/rsc_mgr.c
@@ -0,0 +1,602 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#define pr_fmt(fmt) "gh_rsc_mgr: " fmt
+
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/gunyah.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/kthread.h>
+#include <linux/notifier.h>
+#include <linux/workqueue.h>
+#include <linux/completion.h>
+#include <linux/gunyah_rsc_mgr.h>
+#include <linux/platform_device.h>
+
+#include "rsc_mgr.h"
+
+/* Resource Manager Header */
+struct gh_rm_rpc_hdr {
+	u8 version : 4, hdr_words : 4;
+	u8 type : 2, fragments : 6;
+	u16 seq;
+	u32 msg_id;
+} __packed;
+
+/* Standard reply header */
+struct gh_rm_rpc_reply_hdr {
+	struct gh_rm_rpc_hdr rpc_hdr;
+	u32 err_code;
+} __packed;
+
+/* RPC Header versions */
+#define GH_RM_RPC_HDR_VERSION_ONE	0x1
+
+/* RPC Header words */
+#define GH_RM_RPC_HDR_WORDS		0x2
+
+/* RPC Message types */
+#define GH_RM_RPC_TYPE_CONT		0x0
+#define GH_RM_RPC_TYPE_REQ		0x1
+#define GH_RM_RPC_TYPE_RPLY		0x2
+#define GH_RM_RPC_TYPE_NOTIF		0x3
+
+#define GH_RM_MAX_NUM_FRAGMENTS		62
+
+#define GH_RM_MAX_MSG_SIZE	(GH_MSGQ_MAX_MSG_SIZE - sizeof(struct gh_rm_rpc_hdr))
+
+/**
+ * struct gh_rm_connection - Represents a complete message from resource manager
+ * @payload: Combined payload of all the fragments (msg headers stripped off).
+ * @size: Size of the payload.
+ * @ret: Linux return code, set in case there was an error processing connection
+ * @msg_id: Message ID from the header.
+ * @type: GH_RM_RPC_TYPE_RPLY or GH_RM_RPC_TYPE_NOTIF.
+ * @num_fragments: total number of fragments expected to be received.
+ * @fragments_received: fragments received so far.
+ * @rm_error: For request/reply sequences with standard replies.
+ * @seq: Sequence ID for the main message.
+ * @seq_done: Signals caller that the RM reply has been received
+ */
+struct gh_rm_connection {
+	void *payload;
+	size_t size;
+	int ret;
+	u32 msg_id;
+	u8 type;
+
+	u8 num_fragments;
+	u8 fragments_received;
+
+	/* only for req/reply sequence */
+	u32 rm_error;
+	u16 seq;
+	struct completion seq_done;
+};
+
+struct gh_rm_notif_complete {
+	struct gh_rm_connection *conn;
+	struct work_struct work;
+};
+
+struct gh_rsc_mgr {
+	struct gunyah_resource tx_ghrsc, rx_ghrsc;
+	struct gh_msgq msgq;
+	struct mbox_client msgq_client;
+	struct gh_rm_connection *active_rx_connection;
+	int last_tx_ret;
+
+	struct idr call_idr;
+	struct mutex call_idr_lock;
+
+	struct mutex send_lock;
+
+	struct work_struct recv_work;
+};
+
+static struct gh_rsc_mgr *__rsc_mgr;
+SRCU_NOTIFIER_HEAD_STATIC(gh_rm_notifier);
+
+static struct gh_rm_connection *gh_rm_alloc_connection(u32 msg_id, u8 type)
+{
+	struct gh_rm_connection *connection;
+
+	connection = kzalloc(sizeof(*connection), GFP_KERNEL);
+	if (!connection)
+		return NULL;
+
+	connection->type = type;
+	connection->msg_id = msg_id;
+
+	return connection;
+}
+
+static int gh_rm_init_connection_payload(struct gh_rm_connection *connection, void *msg,
+					size_t hdr_size, size_t msg_size)
+{
+	struct gh_rm_rpc_hdr *hdr = msg;
+	size_t max_buf_size, payload_size;
+
+	if (hdr_size > msg_size)
+		return -EINVAL;
+
+	payload_size = msg_size - hdr_size;
+
+	connection->num_fragments = hdr->fragments;
+	connection->fragments_received = 0;
+	connection->type = hdr->type;
+
+	/* There's not going to be any payload, no need to allocate buffer. */
+	if (!payload_size && !connection->num_fragments)
+		return 0;
+
+	/*
+	 * maximum payload size is GH_MSGQ_MAX_MSG_SIZE - hdr_size
+	 * and can received (hdr->fragments + 1) of those
+	 */
+	max_buf_size = (GH_MSGQ_MAX_MSG_SIZE - hdr_size) * (hdr->fragments + 1);
+
+	connection->payload = kzalloc(max_buf_size, GFP_KERNEL);
+	if (!connection->payload)
+		return -ENOMEM;
+
+	memcpy(connection->payload, msg + hdr_size, payload_size);
+	connection->size = payload_size;
+	return 0;
+}
+
+static void gh_rm_notif_work(struct work_struct *work)
+{
+	struct gh_rm_notif_complete *notif = container_of(work, struct gh_rm_notif_complete, work);
+	struct gh_rm_connection *connection = notif->conn;
+	u32 notif_id = connection->msg_id;
+	struct gh_rm_notification notification = {
+		.buff = connection->payload,
+		.size = connection->size,
+	};
+
+	srcu_notifier_call_chain(&gh_rm_notifier, notif_id, &notification);
+
+	kfree(connection->payload);
+	kfree(connection);
+	kfree(notif);
+}
+
+static struct gh_rm_connection *gh_rm_process_notif(struct gh_rsc_mgr *rsc_mgr,
+						    void *msg, size_t msg_size)
+{
+	struct gh_rm_rpc_hdr *hdr = msg;
+	struct gh_rm_connection *connection;
+
+	connection = gh_rm_alloc_connection(hdr->msg_id, hdr->type);
+	if (!connection) {
+		pr_err("Failed to alloc connection for notification, dropping.\n");
+		return NULL;
+	}
+
+	if (gh_rm_init_connection_payload(connection, msg, sizeof(*hdr), msg_size)) {
+		pr_err("Failed to alloc connection buffer for notification, dropping.\n");
+		kfree(connection);
+		return NULL;
+	}
+
+	return connection;
+}
+
+static struct gh_rm_connection *gh_rm_process_rply(struct gh_rsc_mgr *rsc_mgr,
+						   void *msg, size_t msg_size)
+{
+	struct gh_rm_rpc_reply_hdr *reply_hdr = msg;
+	struct gh_rm_rpc_hdr *hdr = msg;
+	struct gh_rm_connection *connection;
+
+	if (mutex_lock_interruptible(&rsc_mgr->call_idr_lock))
+		return ERR_PTR(-ERESTARTSYS);
+
+	connection = idr_find(&rsc_mgr->call_idr, hdr->seq);
+	mutex_unlock(&rsc_mgr->call_idr_lock);
+
+	if (!connection) {
+		pr_err("Failed to find connection for sequence %u\n", hdr->seq);
+		return NULL;
+	}
+	if (connection->msg_id != hdr->msg_id) {
+		pr_err("Reply for sequence %u expected msg_id: %x but got %x\n", hdr->seq,
+			connection->msg_id, hdr->msg_id);
+		/*
+		 * Don't complete connection and error the client, maybe
+		 * resource manager will send us the expected reply sequence soon.
+		 */
+		return NULL;
+	}
+
+	if (gh_rm_init_connection_payload(connection, msg, sizeof(*reply_hdr), msg_size)) {
+		pr_err("Failed to alloc connection buffer for sequence %d\n", hdr->seq);
+		/* Send connection complete and error the client. */
+		connection->ret = -ENOMEM;
+		complete(&connection->seq_done);
+		return NULL;
+	}
+
+	connection->rm_error = reply_hdr->err_code;
+	return connection;
+}
+
+static void gh_rm_process_cont(struct gh_rm_connection *connection, void *msg, size_t msg_size)
+{
+	struct gh_rm_rpc_hdr *hdr = msg;
+	size_t payload_size = msg_size - sizeof(*hdr);
+
+	/*
+	 * hdr->fragments and hdr->msg_id preserves the value from first reply
+	 * or notif message. To detect mishandling, check it's still intact.
+	 */
+	if (connection->msg_id != hdr->msg_id)
+		pr_warn("Appending mismatched continuation with id %d to connection with id %d\n",
+			hdr->msg_id, connection->msg_id);
+	if (connection->num_fragments != hdr->fragments)
+		pr_warn("Number of fragments mismatch for seq: %d\n", hdr->seq);
+
+	memcpy(connection->payload + connection->size, msg + sizeof(*hdr), payload_size);
+	connection->size += payload_size;
+	connection->fragments_received++;
+}
+
+static bool gh_rm_complete_connection(struct gh_rm_connection *connection)
+{
+	struct gh_rm_notif_complete *notif_work;
+
+	if (!connection)
+		return false;
+
+	if (connection->fragments_received != connection->num_fragments)
+		return false;
+
+	switch (connection->type) {
+	case GH_RM_RPC_TYPE_RPLY:
+		complete(&connection->seq_done);
+		break;
+	case GH_RM_RPC_TYPE_NOTIF:
+		notif_work = kzalloc(sizeof(*notif_work), GFP_KERNEL);
+		if (notif_work == NULL)
+			break;
+
+		notif_work->conn = connection;
+		INIT_WORK(&notif_work->work, gh_rm_notif_work);
+
+		schedule_work(&notif_work->work);
+		break;
+	default:
+		pr_err("Invalid message type (%d) received\n", connection->type);
+		break;
+	}
+
+	return true;
+}
+
+static void gh_rm_abort_connection(struct gh_rm_connection *connection)
+{
+	switch (connection->type) {
+	case GH_RM_RPC_TYPE_RPLY:
+		connection->ret = -EIO;
+		complete(&connection->seq_done);
+		break;
+	case GH_RM_RPC_TYPE_NOTIF:
+		fallthrough;
+	default:
+		kfree(connection->payload);
+		kfree(connection);
+	}
+}
+
+static void gh_rm_msgq_rx_data(struct mbox_client *cl, void *mssg)
+{
+	struct gh_rsc_mgr *rsc_mgr = container_of(cl, struct gh_rsc_mgr, msgq_client);
+	struct gh_msgq_rx_data *rx_data = mssg;
+	void *msg = rx_data->data;
+	size_t msg_size = rx_data->length;
+	struct gh_rm_rpc_hdr *hdr;
+
+	if (msg_size <= sizeof(struct gh_rm_rpc_hdr)) {
+		pr_err("Invalid message size received: %ld is too small\n", msg_size);
+		return;
+	}
+
+	hdr = msg;
+	switch (hdr->type) {
+	case GH_RM_RPC_TYPE_NOTIF:
+		if (rsc_mgr->active_rx_connection) {
+			/* Not possible per protocol. Do something better than BUG_ON */
+			pr_warn("Received start of new notification without finishing existing message series.\n");
+			gh_rm_abort_connection(rsc_mgr->active_rx_connection);
+		}
+		rsc_mgr->active_rx_connection = gh_rm_process_notif(rsc_mgr, msg, msg_size);
+		break;
+	case GH_RM_RPC_TYPE_RPLY:
+		if (rsc_mgr->active_rx_connection) {
+			/* Not possible per protocol. Do something better than BUG_ON */
+			pr_warn("Received start of new reply without finishing existing message series.\n");
+			gh_rm_abort_connection(rsc_mgr->active_rx_connection);
+		}
+		rsc_mgr->active_rx_connection = gh_rm_process_rply(rsc_mgr, msg, msg_size);
+		break;
+	case GH_RM_RPC_TYPE_CONT:
+		if (!rsc_mgr->active_rx_connection) {
+			pr_warn("Received a continuation message without receiving initial message\n");
+			break;
+		}
+		gh_rm_process_cont(rsc_mgr->active_rx_connection, msg, msg_size);
+		break;
+	default:
+		pr_err("Invalid message type (%d) received\n", hdr->type);
+		return;
+	}
+
+	if (gh_rm_complete_connection(rsc_mgr->active_rx_connection))
+		rsc_mgr->active_rx_connection = NULL;
+}
+
+static void gh_rm_msgq_tx_done(struct mbox_client *cl, void *mssg, int r)
+{
+	struct gh_rsc_mgr *rsc_mgr = container_of(cl, struct gh_rsc_mgr, msgq_client);
+
+	kfree(mssg);
+	rsc_mgr->last_tx_ret = r;
+}
+
+static int gh_rm_send_request(struct gh_rsc_mgr *rsc_mgr, u32 message_id,
+			      const void *req_buff, size_t req_buff_size,
+			      struct gh_rm_connection *connection)
+{
+	size_t buff_size_remaining = req_buff_size;
+	const void *req_buff_curr = req_buff;
+	struct gh_rm_rpc_hdr *hdr;
+	u32 cont_fragments = req_buff_size / GH_RM_MAX_MSG_SIZE;
+	size_t payload_size;
+	struct gh_msgq_tx_data *msg;
+	int i, ret;
+
+	if (WARN(cont_fragments > GH_RM_MAX_NUM_FRAGMENTS,
+		 "Limit exceeded for the number of fragments: %u\n", cont_fragments))
+		return -E2BIG;
+
+	ret = mutex_lock_interruptible(&rsc_mgr->send_lock);
+	if (ret)
+		return ret;
+
+	/* Consider also the 'request' packet for the loop count */
+	for (i = 0; i <= cont_fragments; i++) {
+		if (buff_size_remaining > GH_RM_MAX_MSG_SIZE) {
+			payload_size = GH_RM_MAX_MSG_SIZE;
+			buff_size_remaining -= payload_size;
+		} else {
+			payload_size = buff_size_remaining;
+		}
+
+		msg = kzalloc(sizeof(*msg) + GH_MSGQ_MAX_MSG_SIZE, GFP_KERNEL);
+		if (!msg) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		/* Fill header */
+		hdr = (struct gh_rm_rpc_hdr *)msg->data;
+		hdr->version = GH_RM_RPC_HDR_VERSION_ONE;
+		hdr->hdr_words = GH_RM_RPC_HDR_WORDS;
+		hdr->type = i == 0 ? GH_RM_RPC_TYPE_REQ : GH_RM_RPC_TYPE_CONT;
+		hdr->fragments = cont_fragments;
+		hdr->seq = connection->seq;
+		hdr->msg_id = message_id;
+
+		/* Copy payload */
+		memcpy(msg->data + sizeof(*hdr), req_buff_curr, payload_size);
+		req_buff_curr += payload_size;
+
+		/* Force the last fragment to immediately alert the receiver */
+		msg->push = i == cont_fragments;
+		msg->length = sizeof(*hdr) + payload_size;
+
+		ret = mbox_send_message(gh_msgq_chan(&rsc_mgr->msgq), msg);
+		if (ret < 0) {
+			kfree(msg);
+			break;
+		}
+
+		if (rsc_mgr->last_tx_ret) {
+			ret = rsc_mgr->last_tx_ret;
+			break;
+		}
+	}
+
+out:
+	mutex_unlock(&rsc_mgr->send_lock);
+	return ret < 0 ? ret : 0;
+}
+
+/**
+ * gh_rm_call: Achieve request-response type communication with RPC
+ * @message_id: The RM RPC message-id
+ * @req_buff: Request buffer that contains the payload
+ * @req_buff_size: Total size of the payload
+ * @resp_buf: Pointer to a response buffer
+ * @resp_buff_size: Size of the response buffer
+ *
+ * Make a request to the RM-VM and wait for reply back. For a successful
+ * response, the function returns the payload. The size of the payload is set in
+ * resp_buff_size. The resp_buf should be freed by the caller.
+ *
+ * Context: Process context. Will sleep waiting for reply.
+ * Return: >0 is standard reply error from RM. <0 on internal error.
+ */
+int gh_rm_call(u32 message_id, void *req_buff, size_t req_buff_size,
+	       void **resp_buf, size_t *resp_buff_size)
+{
+	struct gh_rm_connection *connection;
+	int ret;
+	struct gh_rsc_mgr *rsc_mgr = __rsc_mgr;
+
+	/* messaged_id 0 is reserved */
+	if (!message_id)
+		return -EINVAL;
+
+	if (!rsc_mgr)
+		return -EPROBE_DEFER;
+
+	connection = gh_rm_alloc_connection(message_id, GH_RM_RPC_TYPE_RPLY);
+	if (!connection)
+		return -ENOMEM;
+
+	init_completion(&connection->seq_done);
+
+	/* Allocate a new seq number for this connection */
+	if (mutex_lock_interruptible(&rsc_mgr->call_idr_lock)) {
+		kfree(connection);
+		return -ERESTARTSYS;
+	}
+	connection->seq = idr_alloc_cyclic(&rsc_mgr->call_idr, connection, 0, U16_MAX, GFP_KERNEL);
+	mutex_unlock(&rsc_mgr->call_idr_lock);
+
+	/* Send the request to the Resource Manager */
+	ret = gh_rm_send_request(rsc_mgr, message_id, req_buff, req_buff_size, connection);
+	if (ret < 0)
+		goto out;
+
+	/* Wait for response */
+	ret = wait_for_completion_interruptible(&connection->seq_done);
+	if (ret)
+		goto out;
+
+	if (connection->ret) {
+		ret = connection->ret;
+		kfree(connection->payload);
+		goto out;
+	}
+
+	if (connection->rm_error) {
+		ret = connection->rm_error;
+		kfree(connection->payload);
+		goto out;
+	}
+
+	*resp_buf = connection->payload;
+	*resp_buff_size = connection->size;
+
+out:
+	mutex_lock(&rsc_mgr->call_idr_lock);
+	idr_remove(&rsc_mgr->call_idr, connection->seq);
+	mutex_unlock(&rsc_mgr->call_idr_lock);
+
+	kfree(connection);
+	return ret;
+}
+
+int gh_rm_register_notifier(struct notifier_block *nb)
+{
+	return srcu_notifier_chain_register(&gh_rm_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(gh_rm_register_notifier);
+
+int gh_rm_unregister_notifier(struct notifier_block *nb)
+{
+	return srcu_notifier_chain_unregister(&gh_rm_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(gh_rm_unregister_notifier);
+
+static int gh_msgq_platform_probe_direction(struct platform_device *pdev,
+					u8 gh_type, int idx, struct gunyah_resource *ghrsc)
+{
+	int ret;
+	struct device_node *node = pdev->dev.of_node;
+
+	ghrsc->type = gh_type;
+
+	ghrsc->irq = platform_get_irq(pdev, idx);
+	if (ghrsc->irq < 0) {
+		dev_err(&pdev->dev, "Failed to get irq%d: %d\n", idx, ghrsc->irq);
+		return ghrsc->irq;
+	}
+
+	ret = of_property_read_u64_index(node, "reg", idx, &ghrsc->capid);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get capid%d: %d\n", idx, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int gh_rm_drv_probe(struct platform_device *pdev)
+{
+	struct gh_rsc_mgr *rsc_mgr;
+	int ret;
+
+	rsc_mgr = devm_kzalloc(&pdev->dev, sizeof(*rsc_mgr), GFP_KERNEL);
+	if (!rsc_mgr)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, rsc_mgr);
+
+	mutex_init(&rsc_mgr->call_idr_lock);
+	idr_init(&rsc_mgr->call_idr);
+	mutex_init(&rsc_mgr->send_lock);
+
+	ret = gh_msgq_platform_probe_direction(pdev, GUNYAH_RESOURCE_TYPE_MSGQ_TX, 0,
+						&rsc_mgr->tx_ghrsc);
+	if (ret)
+		return ret;
+
+	ret = gh_msgq_platform_probe_direction(pdev, GUNYAH_RESOURCE_TYPE_MSGQ_RX, 1,
+						&rsc_mgr->rx_ghrsc);
+	if (ret)
+		return ret;
+
+	rsc_mgr->msgq_client.dev = &pdev->dev;
+	rsc_mgr->msgq_client.tx_block = true;
+	rsc_mgr->msgq_client.rx_callback = gh_rm_msgq_rx_data;
+	rsc_mgr->msgq_client.tx_done = gh_rm_msgq_tx_done;
+
+	ret = gh_msgq_init(&pdev->dev, &rsc_mgr->msgq, &rsc_mgr->msgq_client,
+				&rsc_mgr->tx_ghrsc, &rsc_mgr->rx_ghrsc);
+	if (ret)
+		return ret;
+
+	__rsc_mgr = rsc_mgr;
+
+	return 0;
+}
+
+static int gh_rm_drv_remove(struct platform_device *pdev)
+{
+	struct gh_rsc_mgr *rsc_mgr = platform_get_drvdata(pdev);
+
+	__rsc_mgr = NULL;
+
+	mbox_free_channel(gunyah_msgq_chan(&rsc_mgr->msgq));
+	gunyah_msgq_remove(&rsc_mgr->msgq);
+
+	return 0;
+}
+
+static const struct of_device_id gh_rm_of_match[] = {
+	{ .compatible = "gunyah-resource-manager" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, gh_rm_of_match);
+
+static struct platform_driver gh_rm_driver = {
+	.probe = gh_rm_drv_probe,
+	.remove = gh_rm_drv_remove,
+	.driver = {
+		.name = "gh_rsc_mgr",
+		.of_match_table = gh_rm_of_match,
+	},
+};
+module_platform_driver(gh_rsc_mgr_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Gunyah Resource Manager Driver");
diff --git a/drivers/virt/gunyah/rsc_mgr.h b/drivers/virt/gunyah/rsc_mgr.h
new file mode 100644
index 000000000000..e4f2499267bf
--- /dev/null
+++ b/drivers/virt/gunyah/rsc_mgr.h
@@ -0,0 +1,34 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#ifndef __GH_RSC_MGR_PRIV_H
+#define __GH_RSC_MGR_PRIV_H
+
+#include <linux/gunyah.h>
+
+/* RM Error codes */
+#define GH_RM_ERROR_OK			0x0
+#define GH_RM_ERROR_UNIMPLEMENTED	0xFFFFFFFF
+#define GH_RM_ERROR_NOMEM		0x1
+#define GH_RM_ERROR_NORESOURCE		0x2
+#define GH_RM_ERROR_DENIED		0x3
+#define GH_RM_ERROR_INVALID		0x4
+#define GH_RM_ERROR_BUSY		0x5
+#define GH_RM_ERROR_ARGUMENT_INVALID	0x6
+#define GH_RM_ERROR_HANDLE_INVALID	0x7
+#define GH_RM_ERROR_VALIDATE_FAILED	0x8
+#define GH_RM_ERROR_MAP_FAILED		0x9
+#define GH_RM_ERROR_MEM_INVALID		0xA
+#define GH_RM_ERROR_MEM_INUSE		0xB
+#define GH_RM_ERROR_MEM_RELEASED	0xC
+#define GH_RM_ERROR_VMID_INVALID	0xD
+#define GH_RM_ERROR_LOOKUP_FAILED	0xE
+#define GH_RM_ERROR_IRQ_INVALID		0xF
+#define GH_RM_ERROR_IRQ_INUSE		0x10
+#define GH_RM_ERROR_IRQ_RELEASED	0x11
+
+int gh_rm_call(u32 message_id, void *req_buff, size_t req_buff_size,
+		void **resp_buf, size_t *resp_buff_size);
+
+#endif
diff --git a/include/linux/gunyah_rsc_mgr.h b/include/linux/gunyah_rsc_mgr.h
new file mode 100644
index 000000000000..b3b37225b7fb
--- /dev/null
+++ b/include/linux/gunyah_rsc_mgr.h
@@ -0,0 +1,26 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _GUNYAH_RSC_MGR_H
+#define _GUNYAH_RSC_MGR_H
+
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/gunyah.h>
+
+#define GH_VMID_INVAL	U16_MAX
+
+/* Gunyah recognizes VMID0 as an alias to the current VM's ID */
+#define GH_VMID_SELF			0
+
+struct gh_rm_notification {
+	const void *buff;
+	const size_t size;
+};
+
+int gh_rm_register_notifier(struct notifier_block *nb);
+int gh_rm_unregister_notifier(struct notifier_block *nb);
+
+#endif