| Message ID | 20221114-narmstrong-sm8550-upstream-i2c-master-hub-v1-2-64449106a148@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | soc: qcom: add support for the I2C Master Hub | expand |
On 16/11/2022 11:21, Neil Armstrong wrote: > The I2C Master Hub is a stripped down version of the GENI Serial Engine > QUP Wrapper Controller but only supporting I2C serial engines without > DMA support. > > This documents the I2C Serial Engine variant used within the I2C Master > Hub Wrapper. This serial engine variant lacks DMA support, and requires > a core clock, and since DMA support is lacking, the memory interconnect > path isn't needed. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > .../bindings/i2c/qcom,i2c-geni-qcom.yaml | 61 +++++++++++++++++----- > 1 file changed, 49 insertions(+), 12 deletions(-) > > diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml > index 0e7ed00562e2..ea2c28e70cf5 100644 > --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml > +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml > @@ -15,13 +15,13 @@ allOf: > > properties: > compatible: > - const: qcom,geni-i2c > + enum: > + - qcom,geni-i2c > + - qcom,geni-i2c-master-hub > > - clocks: > - maxItems: 1 > + clocks: true > > - clock-names: > - const: se > + clock-names: true > Same comments as in previous patch. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml index 0e7ed00562e2..ea2c28e70cf5 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml @@ -15,13 +15,13 @@ allOf: properties: compatible: - const: qcom,geni-i2c + enum: + - qcom,geni-i2c + - qcom,geni-i2c-master-hub - clocks: - maxItems: 1 + clocks: true - clock-names: - const: se + clock-names: true clock-frequency: default: 100000 @@ -34,14 +34,9 @@ properties: - const: tx - const: rx - interconnects: - maxItems: 3 + interconnects: true - interconnect-names: - items: - - const: qup-core - - const: qup-config - - const: qup-memory + interconnect-names: true interrupts: maxItems: 1 @@ -71,6 +66,48 @@ required: - clock-names - reg +if: + properties: + compatible: + contains: + const: qcom,geni-i2c-master-hub +then: + properties: + clock-names: + items: + - const: se + - const: core + + clocks: + maxItems: 2 + + dmas: false + dma-names: false + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: qup-core + - const: qup-config +else: + properties: + clocks: + maxItems: 1 + + clock-names: + const: se + + interconnects: + maxItems: 3 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + - const: qup-memory + unevaluatedProperties: false examples:
The I2C Master Hub is a stripped down version of the GENI Serial Engine QUP Wrapper Controller but only supporting I2C serial engines without DMA support. This documents the I2C Serial Engine variant used within the I2C Master Hub Wrapper. This serial engine variant lacks DMA support, and requires a core clock, and since DMA support is lacking, the memory interconnect path isn't needed. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- .../bindings/i2c/qcom,i2c-geni-qcom.yaml | 61 +++++++++++++++++----- 1 file changed, 49 insertions(+), 12 deletions(-)