diff mbox series

[v3,3/3] wifi: rtl8xxxu: Introduce rtl8xxxu_update_ra_report

Message ID 6321862a-3362-95b9-bbd1-be0d5fb97f7f@gmail.com
State Superseded
Headers show
Series [v3,1/3] wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h | expand

Commit Message

Bitterblue Smith Nov. 29, 2022, 7:07 p.m. UTC 
The ra_report struct is used for reporting the TX rate via
sta_statistics. The code which fills it out is duplicated in two
places, and the RTL8188EU will need it in a third place. Move this
code into a new function rtl8xxxu_update_ra_report.

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
v3:
 - No change.

v2:
 - Compare against DESC_RATE_54M instead of DESC_RATE_MCS0.
---
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 107 ++++++++----------
 1 file changed, 46 insertions(+), 61 deletions(-)

Comments

Jun ASAKA Nov. 30, 2022, 1:47 p.m. UTC | #1 
Hi,
I am trying to merge this patch into the linux source tree (Mr. Torvalds' updated source tree) and find a confliection in patch 3/3.
I think you should move the rcu_read_unlock() that originally located in line 4657 to line 4682(right after the if-else section)
to make this patch work normally.

Jun ASAKA.
Bitterblue Smith Nov. 30, 2022, 3:39 p.m. UTC | #2 
On 30/11/2022 15:47, JunASAKA wrote:
> Hi,
> I am trying to merge this patch into the linux source tree (Mr. Torvalds' updated source tree) and find a confliection in patch 3/3.
> I think you should move the rcu_read_unlock() that originally located in line 4657 to line 4682(right after the if-else section)
> to make this patch work normally.
> 
> Jun ASAKA.

This patch set is meant to be applied on top of the wireless-next tree:
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git
That tree contains a commit which is not yet found in other trees:
7927afb5e27b ("wifi: rtl8xxxu: Fix use after rcu_read_unlock in rtl8xxxu_bss_info_changed")
Jun ASAKA Dec. 1, 2022, 1:14 a.m. UTC | #3 
On 30/11/2022 11:39 pm, Bitterblue Smith wrote:
> On 30/11/2022 15:47, JunASAKA wrote:
>> Hi,
>> I am trying to merge this patch into the linux source tree (Mr. Torvalds' updated source tree) and find a confliection in patch 3/3.
>> I think you should move the rcu_read_unlock() that originally located in line 4657 to line 4682(right after the if-else section)
>> to make this patch work normally.
>>
>> Jun ASAKA.
> This patch set is meant to be applied on top of the wireless-next tree:
> https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git
> That tree contains a commit which is not yet found in other trees:
> 7927afb5e27b ("wifi: rtl8xxxu: Fix use after rcu_read_unlock in rtl8xxxu_bss_info_changed")

Oh I see, sorry for my ignorant.


Jun ASAKA.
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 9799bc5ed60a..7580ec8a5562 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4598,6 +4598,32 @@  static void rtl8xxxu_set_aifs(struct rtl8xxxu_priv *priv, u8 slot_time)
 	}
 }
 
+static void rtl8xxxu_update_ra_report(struct rtl8xxxu_ra_report *rarpt,
+				      u8 rate, u8 sgi, u8 bw)
+{
+	u8 mcs, nss;
+
+	rarpt->txrate.flags = 0;
+
+	if (rate <= DESC_RATE_54M) {
+		rarpt->txrate.legacy = rtl8xxxu_legacy_ratetable[rate].bitrate;
+	} else {
+		rtl8xxxu_desc_to_mcsrate(rate, &mcs, &nss);
+		rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
+
+		rarpt->txrate.mcs = mcs;
+		rarpt->txrate.nss = nss;
+
+		if (sgi)
+			rarpt->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+		rarpt->txrate.bw = bw;
+	}
+
+	rarpt->bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
+	rarpt->desc_rate = rate;
+}
+
 static void
 rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			  struct ieee80211_bss_conf *bss_conf, u64 changed)
@@ -4620,9 +4646,7 @@  rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			u32 ramask;
 			int sgi = 0;
 			u8 highest_rate;
-			u8 mcs = 0, nss = 0;
-			u32 bit_rate;
-
+			u8 bw;
 
 			rcu_read_lock();
 			sta = ieee80211_find_sta(vif, bss_conf->bssid);
@@ -4647,37 +4671,19 @@  rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 				sgi = 1;
 
 			highest_rate = fls(ramask) - 1;
-			if (highest_rate < DESC_RATE_MCS0) {
-				rarpt->txrate.legacy =
-				rtl8xxxu_legacy_ratetable[highest_rate].bitrate;
-			} else {
-				rtl8xxxu_desc_to_mcsrate(highest_rate,
-							 &mcs, &nss);
-				rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
-
-				rarpt->txrate.mcs = mcs;
-				rarpt->txrate.nss = nss;
-
-				if (sgi) {
-					rarpt->txrate.flags |=
-						RATE_INFO_FLAGS_SHORT_GI;
-				}
-
-				if (rtl8xxxu_ht40_2g &&
-				    (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
-					rarpt->txrate.bw = RATE_INFO_BW_40;
-				else
-					rarpt->txrate.bw = RATE_INFO_BW_20;
-			}
+			if (rtl8xxxu_ht40_2g &&
+			    (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+				bw = RATE_INFO_BW_40;
+			else
+				bw = RATE_INFO_BW_20;
 			rcu_read_unlock();
-			bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
-			rarpt->bit_rate = bit_rate;
-			rarpt->desc_rate = highest_rate;
+
+			rtl8xxxu_update_ra_report(rarpt, highest_rate, sgi, bw);
 
 			priv->vif = vif;
 			priv->rssi_level = RTL8XXXU_RATR_STA_INIT;
 
-			priv->fops->update_rate_mask(priv, ramask, 0, sgi, rarpt->txrate.bw == RATE_INFO_BW_40);
+			priv->fops->update_rate_mask(priv, ramask, 0, sgi, bw == RATE_INFO_BW_40);
 
 			rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff);
 
@@ -5538,9 +5544,7 @@  static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 	u8 bt_info = 0;
 	struct rtl8xxxu_btcoex *btcoex;
 	struct rtl8xxxu_ra_report *rarpt;
-	u8 rate, sgi, bw;
-	u32 bit_rate;
-	u8 mcs = 0, nss = 0;
+	u8 bw;
 
 	priv = container_of(work, struct rtl8xxxu_priv, c2hcmd_work);
 	btcoex = &priv->bt_coex;
@@ -5566,37 +5570,18 @@  static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 			rtl8723bu_handle_bt_info(priv);
 			break;
 		case C2H_8723B_RA_REPORT:
-			rarpt->txrate.flags = 0;
-			rate = c2h->ra_report.rate;
-			sgi = c2h->ra_report.sgi;
-
-			if (rate < DESC_RATE_MCS0) {
-				rarpt->txrate.legacy =
-					rtl8xxxu_legacy_ratetable[rate].bitrate;
-			} else {
-				rtl8xxxu_desc_to_mcsrate(rate, &mcs, &nss);
-				rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
+			bw = rarpt->txrate.bw;
 
-				rarpt->txrate.mcs = mcs;
-				rarpt->txrate.nss = nss;
-
-				if (sgi) {
-					rarpt->txrate.flags |=
-						RATE_INFO_FLAGS_SHORT_GI;
-				}
-
-				if (skb->len >= offsetof(typeof(*c2h), ra_report.bw) +
-						sizeof(c2h->ra_report.bw)) {
-					if (c2h->ra_report.bw == RTL8XXXU_CHANNEL_WIDTH_40)
-						bw = RATE_INFO_BW_40;
-					else
-						bw = RATE_INFO_BW_20;
-					rarpt->txrate.bw = bw;
-				}
+			if (skb->len >= offsetof(typeof(*c2h), ra_report.bw) +
+					sizeof(c2h->ra_report.bw)) {
+				if (c2h->ra_report.bw == RTL8XXXU_CHANNEL_WIDTH_40)
+					bw = RATE_INFO_BW_40;
+				else
+					bw = RATE_INFO_BW_20;
 			}
-			bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
-			rarpt->bit_rate = bit_rate;
-			rarpt->desc_rate = rate;
+
+			rtl8xxxu_update_ra_report(rarpt, c2h->ra_report.rate,
+						  c2h->ra_report.sgi, bw);
 			break;
 		default:
 			break;