| Message ID | 20221208090237.20572-1-samuel@sholland.org |
|---|---|
| Headers | show |
| Series | riscv: Allwinner D1/D1s platform support | expand |
在 2022-12-17星期六的 17:43 +0000，Conor Dooley写道： > On Thu, Dec 08, 2022 at 03:02:25AM -0600, Samuel Holland wrote: > > This series adds the Kconfig/defconfig plumbing and devicetrees for > > a > > range of Allwinner D1 and D1s-based boards. Many features are > > already > > enabled, including USB, Ethernet, and WiFi. > > > > The devicetrees use bindings from the following series which have > > not > > yet been merged to linux-next: > > - In-package LDO regulators: > > > > https://lore.kernel.org/lkml/20221208084127.17443-1-samuel@sholland.org/ > > - Ethernet MAC binding fix (not a new issue with D1): > > > > https://lore.kernel.org/lkml/20221208061616.7806-1-samuel@sholland.org/ > > - TI ADC101C ADC (accepted, not yet in linux-next): > > > > https://lore.kernel.org/lkml/20221125220903.8632-1-samuel@sholland.org/ > > > > The only remaining DT validation issue is that gpio-fan is missing > > a > > YAML conversion, although one is on the list here: > > https://lore.kernel.org/lkml/20220126200350.3633576-1-clabbe@baylibre.com/ > > With the above 4 in next: > Acked-by: Conor Dooley <conor.dooley@microchip.com> > > Corentin's patch looked like it needed only minor changes. I shall go > ping it :) In addition I think Corentin's patch shouldn't be a blocking issue. This patchset does not depend on DT binding being converted to YAML, TXT binding is enough as dependency. > > > > > $ make ARCH=riscv CROSS_COMPILE=riscv64-linux-musl- dtbs_check > > SYNC include/config/auto.conf.cmd > > LINT Documentation/devicetree/bindings > > CHKDT Documentation/devicetree/bindings/processed-schema.json > > SCHEMA Documentation/devicetree/bindings/processed-schema.json > > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi- > > v3.14.dtb > > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dtb > > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha- > > stu.dtb > > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86- > > panel-480p.dtb > > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86- > > panel-720p.dtb > > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv- > > dock.dtb > > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dtb > > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq- > > pro.dtb > > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dtb > > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dtb > > arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dtb:0:0: > > /fan: failed to match any schema with compatible: ['gpio-fan'] > > > > Note that validation requires dt-schema v2022.12 or newer. > > > > I tested this series (DMIC, Ethernet, LEDs, MMC, PMIC, touch, and > > USB, > > all where available) on the following boards: > > - sun20i-d1-devterm-v3.14 > > - sun20i-d1-dongshan-nezha-stu > > - sun20i-d1-lichee-rv-86-panel-480p > > - sun20i-d1-mangopi-mq-pro > > - sun20i-d1-nezha > > - sun20i-d1s-mangopi-mq > > > > Changes in v3: > > - Drop dummy DCXO clock-frequency property > > - Decrease the PLIC's riscv,ndev property to 175 > > - Fix `make W=1 dtbs` warnings (unnecessary #address/#size-cells) > > - Drop mmc aliases > > - Change LED_FUNCTION_BACKLIGHT to LED_FUNCTION_STATUS (the > > backlight > > regulator is disconnected by default, so this is a standalone > > LED) > > - Fix `make W=1 dtbs` warnings (missing reg properties) > > - ARCH_SUNXI depends on MMU && !XIP_KERNEL > > > > Changes in v2: > > - Add MangoPi MQ (non-Pro) board > > - Split into separate files for sharing with D1s/R528/T113 > > - Use SOC_PERIPHERAL_IRQ macro for interrupts > > - Rename osc24M to dcxo and move the frequency to the board DTs > > - Drop analog LDOs due to the missing binding > > - Correct tcon_top DSI clock reference > > - Add DMIC, DSI controller, and DPHY (bindings are in linux-next) > > - Add CPU OPP table > > - Common regulators moved to MangoPi MQ patch, removed analog LDOs > > - Removed LRADC (depends on analog LDOs) > > - Added XR829 host-wake interrupt > > - Added DMIC sound card to Lichee RV dock and Lichee RV 86 Panel > > - Removed LRADC (depends on analog LDOs) > > - Added LED (GPIO shared between onboard LED and backlight > > regulator) > > - Added PMIC GPIO controller node (binding merged for 6.2) > > - Sort Kconfig as if we had done s/SOC_/ARCH_/ for future-proofing > > > > Samuel Holland (12): > > MAINTAINERS: Match the sun20i family of Allwinner SoCs > > dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors > > dt-bindings: riscv: Add Allwinner D1/D1s board compatibles > > riscv: dts: allwinner: Add the D1/D1s SoC devicetree > > riscv: dts: allwinner: Add MangoPi MQ devicetree > > riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree > > riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees > > riscv: dts: allwinner: Add MangoPi MQ Pro devicetree > > riscv: dts: allwinner: Add Dongshan Nezha STU devicetree > > riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees > > riscv: Add the Allwinner SoC family Kconfig option > > riscv: defconfig: Enable the Allwinner D1 platform and drivers > > > > .../devicetree/bindings/riscv/sunxi.yaml | 69 ++ > > .../devicetree/bindings/vendor-prefixes.yaml | 4 + > > MAINTAINERS | 2 +- > > arch/riscv/Kconfig.socs | 10 + > > arch/riscv/boot/dts/Makefile | 1 + > > arch/riscv/boot/dts/allwinner/Makefile | 11 + > > .../allwinner/sun20i-common-regulators.dtsi | 35 + > > .../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 252 ++++++ > > .../dts/allwinner/sun20i-d1-devterm-v3.14.dts | 36 + > > .../sun20i-d1-dongshan-nezha-stu.dts | 117 +++ > > .../sun20i-d1-lichee-rv-86-panel-480p.dts | 29 + > > .../sun20i-d1-lichee-rv-86-panel-720p.dts | 10 + > > .../sun20i-d1-lichee-rv-86-panel.dtsi | 119 +++ > > .../allwinner/sun20i-d1-lichee-rv-dock.dts | 97 ++ > > .../dts/allwinner/sun20i-d1-lichee-rv.dts | 87 ++ > > .../allwinner/sun20i-d1-mangopi-mq-pro.dts | 142 +++ > > .../boot/dts/allwinner/sun20i-d1-nezha.dts | 166 ++++ > > arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 66 ++ > > .../dts/allwinner/sun20i-d1s-mangopi-mq.dts | 134 +++ > > arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 76 ++ > > .../boot/dts/allwinner/sunxi-d1-t113.dtsi | 15 + > > .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 837 > > ++++++++++++++++++ > > arch/riscv/configs/defconfig | 22 +- > > 23 files changed, 2335 insertions(+), 2 deletions(-) > > create mode 100644 > > Documentation/devicetree/bindings/riscv/sunxi.yaml > > create mode 100644 arch/riscv/boot/dts/allwinner/Makefile > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-common- > > regulators.dtsi > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1- > > clockworkpi-v3.14.dts > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1- > > devterm-v3.14.dts > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1- > > dongshan-nezha-stu.dts > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee- > > rv-86-panel-480p.dts > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee- > > rv-86-panel-720p.dts > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee- > > rv-86-panel.dtsi > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee- > > rv-dock.dts > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee- > > rv.dts > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1- > > mangopi-mq-pro.dts > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1- > > nezha.dts > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s- > > mangopi-mq.dts > > create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi > > create mode 100644 arch/riscv/boot/dts/allwinner/sunxi-d1- > > t113.dtsi > > create mode 100644 arch/riscv/boot/dts/allwinner/sunxi-d1s- > > t113.dtsi > > > > -- > > 2.37.4 > > > >
Am Donnerstag, 8. Dezember 2022, 10:02:25 CET schrieb Samuel Holland: > This series adds the Kconfig/defconfig plumbing and devicetrees for a > range of Allwinner D1 and D1s-based boards. Many features are already > enabled, including USB, Ethernet, and WiFi. > > The devicetrees use bindings from the following series which have not > yet been merged to linux-next: > - In-package LDO regulators: > https://lore.kernel.org/lkml/20221208084127.17443-1-samuel@sholland.org/ > - Ethernet MAC binding fix (not a new issue with D1): > https://lore.kernel.org/lkml/20221208061616.7806-1-samuel@sholland.org/ > - TI ADC101C ADC (accepted, not yet in linux-next): > https://lore.kernel.org/lkml/20221125220903.8632-1-samuel@sholland.org/ > > The only remaining DT validation issue is that gpio-fan is missing a > YAML conversion, although one is on the list here: > https://lore.kernel.org/lkml/20220126200350.3633576-1-clabbe@baylibre.com/ > > $ make ARCH=riscv CROSS_COMPILE=riscv64-linux-musl- dtbs_check > SYNC include/config/auto.conf.cmd > LINT Documentation/devicetree/bindings > CHKDT Documentation/devicetree/bindings/processed-schema.json > SCHEMA Documentation/devicetree/bindings/processed-schema.json > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dtb > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dtb > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dtb > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dtb > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dtb > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dtb > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dtb > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dtb > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dtb > DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dtb > arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dtb:0:0: /fan: failed to match any schema with compatible: ['gpio-fan'] > > Note that validation requires dt-schema v2022.12 or newer. > > I tested this series (DMIC, Ethernet, LEDs, MMC, PMIC, touch, and USB, > all where available) on the following boards: > - sun20i-d1-devterm-v3.14 > - sun20i-d1-dongshan-nezha-stu > - sun20i-d1-lichee-rv-86-panel-480p > - sun20i-d1-mangopi-mq-pro > - sun20i-d1-nezha > - sun20i-d1s-mangopi-mq I've re-tested this series again with the current merge-window state (riscv pull already in) and everything still works nicely. So all tags still hold :-) Thanks Heiko
On Mon, Dec 19, 2022 at 05:43:17PM +0800, Icenowy Zheng wrote: > 在 2022-12-17星期六的 17:43 +0000，Conor Dooley写道： > > On Thu, Dec 08, 2022 at 03:02:25AM -0600, Samuel Holland wrote: > > > This series adds the Kconfig/defconfig plumbing and devicetrees for > > > a > > > range of Allwinner D1 and D1s-based boards. Many features are > > > already > > > enabled, including USB, Ethernet, and WiFi. > > > > > > The devicetrees use bindings from the following series which have > > > not > > > yet been merged to linux-next: > > > - In-package LDO regulators: > > > > > > https://lore.kernel.org/lkml/20221208084127.17443-1-samuel@sholland.org/ > > > - Ethernet MAC binding fix (not a new issue with D1): > > > > > > https://lore.kernel.org/lkml/20221208061616.7806-1-samuel@sholland.org/ > > > - TI ADC101C ADC (accepted, not yet in linux-next): > > > > > > https://lore.kernel.org/lkml/20221125220903.8632-1-samuel@sholland.org/ > > > > > > The only remaining DT validation issue is that gpio-fan is missing > > > a > > > YAML conversion, although one is on the list here: > > > https://lore.kernel.org/lkml/20220126200350.3633576-1-clabbe@baylibre.com/ > > > > With the above 4 in next: > > Acked-by: Conor Dooley <conor.dooley@microchip.com> > > > > Corentin's patch looked like it needed only minor changes. I shall go > > ping it :) > > In addition I think Corentin's patch shouldn't be a blocking issue. > This patchset does not depend on DT binding being converted to YAML, > TXT binding is enough as dependency. I rid RISC-V of warnings and I would like it to stay that way please. There's other stuff outstanding anyway and Corentin has already sent a v2 :)