diff mbox series

[v2,1/2] dt: bindings: add dt entry for XO calibration support

Message ID 20230131140345.6193-2-quic_youghand@quicinc.com
State Superseded
Headers show
Series dt: bindings: add dt entry for XO calibration support | expand

Commit Message

Youghandhar Chintala Jan. 31, 2023, 2:03 p.m. UTC
Add dt binding to get XO calibration data support for Wi-Fi RF clock.

Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
---
 .../devicetree/bindings/net/wireless/qcom,ath11k.yaml         | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Krzysztof Kozlowski Jan. 31, 2023, 6:02 p.m. UTC | #1
On 31/01/2023 15:03, Youghandhar Chintala wrote:
> Add dt binding to get XO calibration data support for Wi-Fi RF clock.

Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).
Hint: dt-bindings: net: qcom,ath11k:

> 
> Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
> ---
>  .../devicetree/bindings/net/wireless/qcom,ath11k.yaml         | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> index f7cf135aa37f..205ee949daba 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> @@ -41,6 +41,10 @@ properties:
>          * reg
>          * reg-names
>  
> +  xo-cal-data:
> +    description:
> +      XO cal offset to be configured in XO trim register

Missing type. I also do not understand what's this and why some register
offset should be stored in DT. Please give us some justification why
this is suitable for DT.

Best regards,
Krzysztof
Rob Herring (Arm) Feb. 1, 2023, 5:20 p.m. UTC | #2
On Tue, Jan 31, 2023 at 07:02:16PM +0100, Krzysztof Kozlowski wrote:
> On 31/01/2023 15:03, Youghandhar Chintala wrote:
> > Add dt binding to get XO calibration data support for Wi-Fi RF clock.
> 
> Use subject prefixes matching the subsystem (which you can get for
> example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
> your patch is touching).
> Hint: dt-bindings: net: qcom,ath11k:
> 
> > 
> > Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
> > ---
> >  .../devicetree/bindings/net/wireless/qcom,ath11k.yaml         | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> > index f7cf135aa37f..205ee949daba 100644
> > --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> > +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> > @@ -41,6 +41,10 @@ properties:
> >          * reg
> >          * reg-names
> >  
> > +  xo-cal-data:
> > +    description:
> > +      XO cal offset to be configured in XO trim register
> 
> Missing type. I also do not understand what's this and why some register
> offset should be stored in DT. Please give us some justification why
> this is suitable for DT.

I think that's a voltage offset or something, but you are right, we 
shouldn't have to guess.

It needs a vendor prefix, too.

Rob
Youghandhar Chintala Feb. 7, 2023, 6:40 a.m. UTC | #3
On 1/31/2023 11:32 PM, Krzysztof Kozlowski wrote:
> On 31/01/2023 15:03, Youghandhar Chintala wrote:
>> Add dt binding to get XO calibration data support for Wi-Fi RF clock.
> Use subject prefixes matching the subsystem (which you can get for
> example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
> your patch is touching).
> Hint: dt-bindings: net: qcom,ath11k:
>
>> Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
>> ---
>>   .../devicetree/bindings/net/wireless/qcom,ath11k.yaml         | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
>> index f7cf135aa37f..205ee949daba 100644
>> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
>> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
>> @@ -41,6 +41,10 @@ properties:
>>           * reg
>>           * reg-names
>>   
>> +  xo-cal-data:
>> +    description:
>> +      XO cal offset to be configured in XO trim register
> Missing type. I also do not understand what's this and why some register
> offset should be stored in DT. Please give us some justification why
> this is suitable for DT.
>
> Best regards,
> Krzysztof
>
Hi Krzysztof,

I will address you comments in next version of patch.

Regards,

Youghandhar
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index f7cf135aa37f..205ee949daba 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -41,6 +41,10 @@  properties:
         * reg
         * reg-names
 
+  xo-cal-data:
+    description:
+      XO cal offset to be configured in XO trim register
+
   qcom,ath11k-calibration-variant:
     $ref: /schemas/types.yaml#/definitions/string
     description: