| Message ID | 20230202132511.3983095-8-abel.vesa@linaro.org |
|---|---|
| State | Accepted |
| Commit | 7f7e5c1b037fc38dfc4f9530fcdb6fa8bd9fd01c |
| Headers | show |
| Series | sm8550: Add USB HC and PHYs support | expand |
On 23-02-03 11:55:11, Johan Hovold wrote: > On Thu, Feb 02, 2023 at 03:25:10PM +0200, Abel Vesa wrote: > > Add USB host controller and PHY nodes. > > > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > > --- > > > > Changes since v3: > > * none > > > > Changes since v2: > > * none > > > > NOTE: This patch has been already merged. It is here only to provide > > context for the rest of the patchset. There is a change with respect to > > the clocks, but that will be sent as a separate/individual fix patch. > > I believe it was because of the 'phy' and 'common' resets, which have > been switched below. No, the resets haven't been switched, at least not compared to the already merged version. > > > arch/arm64/boot/dts/qcom/sm8550.dtsi | 92 +++++++++++++++++++++++++++- > > 1 file changed, 91 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi > > index a85d2ae7d155..0262193e2ffe 100644 > > --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi > > @@ -14,6 +14,7 @@ > > #include <dt-bindings/mailbox/qcom-ipcc.h> > > #include <dt-bindings/power/qcom-rpmpd.h> > > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > > +#include <dt-bindings/phy/phy-qcom-qmp.h> > > #include <dt-bindings/thermal/thermal.h> > > > > / { > > @@ -746,7 +747,7 @@ gcc: clock-controller@100000 { > > <&ufs_mem_phy 0>, > > <&ufs_mem_phy 1>, > > <&ufs_mem_phy 2>, > > - <0>; > > + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; > > }; > > > > ipcc: mailbox@408000 { > > @@ -2060,6 +2061,95 @@ opp-202000000 { > > }; > > }; > > > > + usb_1_hsphy: phy@88e3000 { > > + compatible = "qcom,sm8550-snps-eusb2-phy"; > > + reg = <0x0 0x088e3000 0x0 0x154>; > > + #phy-cells = <0>; > > + > > + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; > > + clock-names = "ref"; > > + > > + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; > > + > > + status = "disabled"; > > + }; > > + > > + usb_dp_qmpphy: phy@88e8000 { > > + compatible = "qcom,sm8550-qmp-usb3-dp-phy"; > > + reg = <0x0 0x088e8000 0x0 0x3000>; > > + > > + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, > > + <&rpmhcc RPMH_CXO_CLK>, > > + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, > > + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; > > + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; > > + > > + power-domains = <&gcc USB3_PHY_GDSC>; > > + > > + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, > > + <&gcc GCC_USB3_PHY_PRIM_BCR>; > > + reset-names = "phy", "common"; > > + > > + #clock-cells = <1>; > > + #phy-cells = <1>; > > + > > + status = "disabled"; > > + }; > > Johan
On Tue, Feb 07, 2023 at 01:03:26PM +0200, Abel Vesa wrote: > On 23-02-03 11:55:11, Johan Hovold wrote: > > On Thu, Feb 02, 2023 at 03:25:10PM +0200, Abel Vesa wrote: > > > Add USB host controller and PHY nodes. > > > > > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > > > --- > > > > > > Changes since v3: > > > * none > > > > > > Changes since v2: > > > * none > > > > > > NOTE: This patch has been already merged. It is here only to provide > > > context for the rest of the patchset. There is a change with respect to > > > the clocks, but that will be sent as a separate/individual fix patch. > > > > I believe it was because of the 'phy' and 'common' resets, which have > > been switched below. > > No, the resets haven't been switched, at least not compared to the > already merged version. The resets were wrong in the merged version just as they are below. I've already sent a fix here: https://lore.kernel.org/lkml/20230123101607.2413-1-johan+linaro@kernel.org/ > > > + usb_dp_qmpphy: phy@88e8000 { > > > + compatible = "qcom,sm8550-qmp-usb3-dp-phy"; > > > + reg = <0x0 0x088e8000 0x0 0x3000>; > > > + > > > + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, > > > + <&rpmhcc RPMH_CXO_CLK>, > > > + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, > > > + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; > > > + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; > > > + > > > + power-domains = <&gcc USB3_PHY_GDSC>; > > > + > > > + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, > > > + <&gcc GCC_USB3_PHY_PRIM_BCR>; > > > + reset-names = "phy", "common"; Johan
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index a85d2ae7d155..0262193e2ffe 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/thermal/thermal.h> / { @@ -746,7 +747,7 @@ gcc: clock-controller@100000 { <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, - <0>; + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; }; ipcc: mailbox@408000 { @@ -2060,6 +2061,95 @@ opp-202000000 { }; }; + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x088e3000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8550-qmp-usb3-dp-phy"; + reg = <0x0 0x088e8000 0x0 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB3_PHY_GDSC>; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8550-dwc3", "qcom,dwc3"; + reg = <0x0 0x0a6f8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&rpmhcc TCSR_USB3_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0 0x0a600000 0x0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x40 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + phys = <&usb_1_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8550-mdss"; reg = <0 0x0ae00000 0 0x1000>;
Add USB host controller and PHY nodes. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- Changes since v3: * none Changes since v2: * none NOTE: This patch has been already merged. It is here only to provide context for the rest of the patchset. There is a change with respect to the clocks, but that will be sent as a separate/individual fix patch. arch/arm64/boot/dts/qcom/sm8550.dtsi | 92 +++++++++++++++++++++++++++- 1 file changed, 91 insertions(+), 1 deletion(-)