diff mbox series

[v3,06/12] gpiolib: split linux/gpio/driver.h out of linux/gpio.h

Message ID 20230207142952.51844-7-andriy.shevchenko@linux.intel.com
State New
Headers show
Series [v3,01/12] gpiolib: remove empty asm/gpio.h files | expand

Commit Message

Andy Shevchenko Feb. 7, 2023, 2:29 p.m. UTC
From: Arnd Bergmann <arnd@arndb.de>

Almost all gpio drivers include linux/gpio/driver.h, and other
files should not rely on includes from this header.

Remove the indirect include from here and include the correct
headers directly from where they are used.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 arch/arm/mach-omap1/irq.c                              | 1 +
 arch/arm/mach-orion5x/board-rd88f5182.c                | 1 +
 arch/arm/mach-s3c/s3c64xx.c                            | 1 +
 arch/arm/mach-sa1100/assabet.c                         | 1 +
 arch/arm/plat-orion/gpio.c                             | 1 +
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c | 1 +
 include/linux/gpio.h                                   | 2 --
 include/linux/mfd/ucb1x00.h                            | 1 +
 8 files changed, 7 insertions(+), 2 deletions(-)

Comments

Linus Walleij Feb. 8, 2023, 2:55 p.m. UTC | #1
On Wed, Feb 8, 2023 at 3:51 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
> On Wed, Feb 08, 2023 at 12:55:06AM +0200, Andy Shevchenko wrote:
> > On Tue, Feb 07, 2023 at 03:55:23PM +0100, Linus Walleij wrote:
> > > On Tue, Feb 7, 2023 at 3:29 PM Andy Shevchenko
> > > <andriy.shevchenko@linux.intel.com> wrote:
> > >
> > > > From: Arnd Bergmann <arnd@arndb.de>
> > > >
> > > > Almost all gpio drivers include linux/gpio/driver.h, and other
> > > > files should not rely on includes from this header.
> > > >
> > > > Remove the indirect include from here and include the correct
> > > > headers directly from where they are used.
> >
> > ...
> >
> > > Make sure you push this to the kernel.org build servers (zeroday builds),
> >
> > Of course, that is the purpose of publishing this before the release (so we
> > will have some TODO list that eventually this can be applied for v6.4-rc1).
> >
> > > I think this patch needs to hit some more files, in my tests with a similar
> > > patch at least these:
> >
> > Right. I forgot to also incorporate your stuff into this series.
> > Do you have anything that I can take as is?
>
> I'm going to incorporate the following:
>
>         gpio: Make the legacy <linux/gpio.h> consumer-only
>         ARM: s3c24xx: Use the right include
>         ARM: orion/gpio: Use the right include
>         hte: tegra-194: Use proper includes
>         pcmcia: pxa2xx_viper: Include dependency

Excellent, thanks. I don't care about being credited, just want things
to go smooth so you run into less snags.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 9ccc784fd614..bfc7ab010ae2 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -41,6 +41,7 @@ 
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
 
 #include <asm/irq.h>
 #include <asm/exception.h>
diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c
index 596601367989..1c14e49a90a6 100644
--- a/arch/arm/mach-orion5x/board-rd88f5182.c
+++ b/arch/arm/mach-orion5x/board-rd88f5182.c
@@ -9,6 +9,7 @@ 
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c
index e97bd59083a8..48fd5b0a3927 100644
--- a/arch/arm/mach-s3c/s3c64xx.c
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -21,6 +21,7 @@ 
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 2eba112f2ad8..d000c678b439 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -10,6 +10,7 @@ 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio/gpio-reg.h>
 #include <linux/gpio/machine.h>
 #include <linux/gpio_keys.h>
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 3ef9ecdd6343..4946d8066f6a 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -19,6 +19,7 @@ 
 #include <linux/bitops.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/leds.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c
index 9540a05247c2..89c8829528c2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c
@@ -1,6 +1,7 @@ 
 // SPDX-License-Identifier: GPL-2.0
 #include <net/mac80211.h>
 #include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/gpio.h>
 #include <linux/gpio/driver.h>
 #include <linux/gpio/machine.h>
 #include <linux/gpio/consumer.h>
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index a1271526e489..84bb49939d6e 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -54,9 +54,7 @@  struct gpio {
 };
 
 #ifdef CONFIG_GPIOLIB
-#include <linux/compiler.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio/driver.h>
 
 /*
  * "valid" GPIO numbers are nonnegative and may be passed to
diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
index 43bcf35afe27..ede237384723 100644
--- a/include/linux/mfd/ucb1x00.h
+++ b/include/linux/mfd/ucb1x00.h
@@ -10,6 +10,7 @@ 
 #include <linux/device.h>
 #include <linux/mfd/mcp.h>
 #include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/mutex.h>
 
 #define UCB_IO_DATA	0x00