| Message ID | 20230213130854.2473-1-quic_rajkbhag@quicinc.com |
|---|---|
| Headers | show |
| Series | ath11k: factory test mode support | expand |
On 2/13/2023 6:38 PM, Raj Kumar Bhagat wrote: > Device is booted in factory test mode to calibrate the board. > The commands are sent from a userspace application, which is > sent to firmware using wmi commands. Firmware will send the > response back to the application which stores the calibration > data in caldata.bin file. This file will be loaded when the > device boots up normally next time. > > Govindaraj Saminathan (1): > wifi: ath11k: factory test mode support > > Sowmiya Sree Elavalagan (1): > wifi: ath11k: Allow ath11k to boot without caldata in ftm mode > > drivers/net/wireless/ath/ath11k/ahb.c | 3 +- > drivers/net/wireless/ath/ath11k/core.c | 20 +- > drivers/net/wireless/ath/ath11k/core.h | 14 +- > drivers/net/wireless/ath/ath11k/debug.h | 2 + > drivers/net/wireless/ath/ath11k/mac.c | 13 +- > drivers/net/wireless/ath/ath11k/pci.c | 3 +- > drivers/net/wireless/ath/ath11k/qmi.c | 10 +- > drivers/net/wireless/ath/ath11k/testmode.c | 323 ++++++++++++++++--- > drivers/net/wireless/ath/ath11k/testmode.h | 21 +- > drivers/net/wireless/ath/ath11k/testmode_i.h | 19 ++ > drivers/net/wireless/ath/ath11k/wmi.c | 40 ++- > drivers/net/wireless/ath/ath11k/wmi.h | 20 ++ > drivers/net/wireless/ath/ath11k/wow.c | 3 +- > 13 files changed, 427 insertions(+), 64 deletions(-) > > > base-commit: ddd8e84e007263f3aa8993f32a3dd4dc8ec0876a Series LGTM
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> writes: > Device is booted in factory test mode to calibrate the board. > The commands are sent from a userspace application, which is > sent to firmware using wmi commands. Firmware will send the > response back to the application which stores the calibration > data in caldata.bin file. This file will be loaded when the > device boots up normally next time. > > Govindaraj Saminathan (1): > wifi: ath11k: factory test mode support > > Sowmiya Sree Elavalagan (1): > wifi: ath11k: Allow ath11k to boot without caldata in ftm mode While reviewing the patches I made quite a few style cleanup to patches (too many to list): https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=master-pending&id=4a5ca29c396ace5c46b208a8c15a3ba53eabaddd https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=master-pending&id=ba74c7478f5d15ce38e609b9ad4810db7511a3dd I only compile tested them. Please use these as the baseline for v2.
On 3/13/2023 5:51 PM, Kalle Valo wrote: > Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> writes: > >> Device is booted in factory test mode to calibrate the board. >> The commands are sent from a userspace application, which is >> sent to firmware using wmi commands. Firmware will send the >> response back to the application which stores the calibration >> data in caldata.bin file. This file will be loaded when the >> device boots up normally next time. >> >> Govindaraj Saminathan (1): >> wifi: ath11k: factory test mode support >> >> Sowmiya Sree Elavalagan (1): >> wifi: ath11k: Allow ath11k to boot without caldata in ftm mode > > While reviewing the patches I made quite a few style cleanup to patches > (too many to list): > > https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=master-pending&id=4a5ca29c396ace5c46b208a8c15a3ba53eabaddd > > https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=master-pending&id=ba74c7478f5d15ce38e609b9ad4810db7511a3dd > > I only compile tested them. Please use these as the baseline for v2. > Hi Kalle, Unable to get the baseline patch for v2 from the above link. Getting the below error with the link: Bad commit reference: 4a5ca29c396ace5c46b208a8c15a3ba53eabaddd
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> writes: > On 3/13/2023 5:51 PM, Kalle Valo wrote: > >> Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> writes: >> >>> Device is booted in factory test mode to calibrate the board. >>> The commands are sent from a userspace application, which is >>> sent to firmware using wmi commands. Firmware will send the >>> response back to the application which stores the calibration >>> data in caldata.bin file. This file will be loaded when the >>> device boots up normally next time. >>> >>> Govindaraj Saminathan (1): >>> wifi: ath11k: factory test mode support >>> >>> Sowmiya Sree Elavalagan (1): >>> wifi: ath11k: Allow ath11k to boot without caldata in ftm mode >> >> While reviewing the patches I made quite a few style cleanup to patches >> (too many to list): >> >> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=master-pending&id=4a5ca29c396ace5c46b208a8c15a3ba53eabaddd >> >> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=master-pending&id=ba74c7478f5d15ce38e609b9ad4810db7511a3dd >> >> I only compile tested them. Please use these as the baseline for v2. >> > Hi Kalle, > > Unable to get the baseline patch for v2 from the above link. Getting the > below error with the link: > Bad commit reference: 4a5ca29c396ace5c46b208a8c15a3ba53eabaddd I now pushed them again: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=f3d1f7ae115e12108ba7d7fa0ea6374b9e28869c https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=229ea354bdd24bf3c33c9447674fab8d609e24a2