Message ID | 20230227205035.18551-1-git@apitzsch.eu |
---|---|
State | Superseded |
Headers | show |
Series | [1/2] dt-bindings: input: atmel,maxtouch: add linux,keycodes | expand |
On Mon, Feb 27, 2023 at 9:50 PM André Apitzsch <git@apitzsch.eu> wrote: > In some configurations the touch controller can support the touch keys. > Document the linux,keycodes property that enables those keys and > specifies the keycodes that should be used to report the key events. > > Signed-off-by: André Apitzsch <git@apitzsch.eu> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
On Mon, Feb 27, 2023 at 9:50 PM André Apitzsch <git@apitzsch.eu> wrote: > Add support for touch keys found in some Atmel touch controller > configurations. > > Signed-off-by: André Apitzsch <git@apitzsch.eu> Looks good to me. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
On 27.02.2023 22:50, André Apitzsch wrote: > [Some people who received this message don't often get email from git@apitzsch.eu. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ] > > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > Add support for touch keys found in some Atmel touch controller > configurations. > > Signed-off-by: André Apitzsch <git@apitzsch.eu> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> > --- > drivers/input/touchscreen/atmel_mxt_ts.c | 85 ++++++++++++++++++++++++ > 1 file changed, 85 insertions(+) > > diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c > index 996bf434e1cb..eb368dd1abf0 100644 > --- a/drivers/input/touchscreen/atmel_mxt_ts.c > +++ b/drivers/input/touchscreen/atmel_mxt_ts.c > @@ -55,6 +55,7 @@ > #define MXT_TOUCH_KEYARRAY_T15 15 > #define MXT_TOUCH_PROXIMITY_T23 23 > #define MXT_TOUCH_PROXKEY_T52 52 > +#define MXT_TOUCH_PTC_KEYS_T97 97 > #define MXT_PROCI_GRIPFACE_T20 20 > #define MXT_PROCG_NOISE_T22 22 > #define MXT_PROCI_ONETOUCH_T24 24 > @@ -326,9 +327,13 @@ struct mxt_data { > u16 T71_address; > u8 T9_reportid_min; > u8 T9_reportid_max; > + u8 T15_reportid_min; > + u8 T15_reportid_max; > u16 T18_address; > u8 T19_reportid; > u16 T44_address; > + u8 T97_reportid_min; > + u8 T97_reportid_max; > u8 T100_reportid_min; > u8 T100_reportid_max; > > @@ -344,6 +349,9 @@ struct mxt_data { > u32 *t19_keymap; > unsigned int t19_num_keys; > > + u32 *t15_keymap; > + unsigned int t15_num_keys; > + > enum mxt_suspend_mode suspend_mode; > > u32 wakeup_method; > @@ -375,6 +383,7 @@ static bool mxt_object_readable(unsigned int type) > case MXT_TOUCH_KEYARRAY_T15: > case MXT_TOUCH_PROXIMITY_T23: > case MXT_TOUCH_PROXKEY_T52: > + case MXT_TOUCH_PTC_KEYS_T97: > case MXT_TOUCH_MULTITOUCHSCREEN_T100: > case MXT_PROCI_GRIPFACE_T20: > case MXT_PROCG_NOISE_T22: > @@ -891,6 +900,25 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message) > data->update_input = true; > } > > +static void mxt_proc_t15_messages(struct mxt_data *data, u8 *message) > +{ > + struct input_dev *input_dev = data->input_dev; > + unsigned long keystates = get_unaligned_le32(&message[2]); > + int key; > + > + for (key = 0; key < data->t15_num_keys; key++) { > + input_report_key(input_dev, data->t15_keymap[key], > + !!(keystates & BIT(key))); > + } > + > + data->update_input = true; > +} > + > +static void mxt_proc_t97_messages(struct mxt_data *data, u8 *message) > +{ > + mxt_proc_t15_messages(data, message); > +} > + > static void mxt_proc_t100_message(struct mxt_data *data, u8 *message) > { > struct device *dev = &data->client->dev; > @@ -1017,6 +1045,12 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message) > } else if (report_id >= data->T9_reportid_min && > report_id <= data->T9_reportid_max) { > mxt_proc_t9_message(data, message); > + } else if (report_id >= data->T15_reportid_min && > + report_id <= data->T15_reportid_max) { > + mxt_proc_t15_messages(data, message); > + } else if (report_id >= data->T97_reportid_min && > + report_id <= data->T97_reportid_max) { > + mxt_proc_t97_messages(data, message); > } else if (report_id >= data->T100_reportid_min && > report_id <= data->T100_reportid_max) { > mxt_proc_t100_message(data, message); > @@ -1689,9 +1723,13 @@ static void mxt_free_object_table(struct mxt_data *data) > data->T71_address = 0; > data->T9_reportid_min = 0; > data->T9_reportid_max = 0; > + data->T15_reportid_min = 0; > + data->T15_reportid_max = 0; > data->T18_address = 0; > data->T19_reportid = 0; > data->T44_address = 0; > + data->T97_reportid_min = 0; > + data->T97_reportid_max = 0; > data->T100_reportid_min = 0; > data->T100_reportid_max = 0; > data->max_reportid = 0; > @@ -1764,6 +1802,10 @@ static int mxt_parse_object_table(struct mxt_data *data, > object->num_report_ids - 1; > data->num_touchids = object->num_report_ids; > break; > + case MXT_TOUCH_KEYARRAY_T15: > + data->T15_reportid_min = min_id; > + data->T15_reportid_max = max_id; > + break; > case MXT_SPT_COMMSCONFIG_T18: > data->T18_address = object->start_address; > break; > @@ -1773,6 +1815,10 @@ static int mxt_parse_object_table(struct mxt_data *data, > case MXT_SPT_GPIOPWM_T19: > data->T19_reportid = min_id; > break; > + case MXT_TOUCH_PTC_KEYS_T97: > + data->T97_reportid_min = min_id; > + data->T97_reportid_max = max_id; > + break; > case MXT_TOUCH_MULTITOUCHSCREEN_T100: > data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100; > data->T100_reportid_min = min_id; > @@ -2050,6 +2096,7 @@ static int mxt_initialize_input_device(struct mxt_data *data) > int error; > unsigned int num_mt_slots; > unsigned int mt_flags = 0; > + int i; > > switch (data->multitouch) { > case MXT_TOUCH_MULTI_T9: > @@ -2095,6 +2142,10 @@ static int mxt_initialize_input_device(struct mxt_data *data) > input_dev->open = mxt_input_open; > input_dev->close = mxt_input_close; > > + input_dev->keycode = data->t15_keymap; > + input_dev->keycodemax = data->t15_num_keys; > + input_dev->keycodesize = sizeof(data->t15_keymap[0]); > + > input_set_capability(input_dev, EV_KEY, BTN_TOUCH); > > /* For single touch */ > @@ -2162,6 +2213,12 @@ static int mxt_initialize_input_device(struct mxt_data *data) > 0, 255, 0, 0); > } > > + /* For T15 and T97 Key Array */ > + if (data->T15_reportid_min || data->T97_reportid_min) { > + for (i = 0; i < data->t15_num_keys; i++) > + input_set_capability(input_dev, EV_KEY, data->t15_keymap[i]); > + } > + > input_set_drvdata(input_dev, data); > > error = input_register_device(input_dev); > @@ -3080,8 +3137,10 @@ static void mxt_input_close(struct input_dev *dev) > static int mxt_parse_device_properties(struct mxt_data *data) > { > static const char keymap_property[] = "linux,gpio-keymap"; > + static const char buttons_property[] = "linux,keycodes"; > struct device *dev = &data->client->dev; > u32 *keymap; > + u32 *buttonmap; > int n_keys; > int error; > > @@ -3111,6 +3170,32 @@ static int mxt_parse_device_properties(struct mxt_data *data) > data->t19_num_keys = n_keys; > } > > + if (device_property_present(dev, buttons_property)) { > + n_keys = device_property_count_u32(dev, buttons_property); > + if (n_keys <= 0) { > + error = n_keys < 0 ? n_keys : -EINVAL; > + dev_err(dev, "invalid/malformed '%s' property: %d\n", > + buttons_property, error); > + return error; > + } > + > + buttonmap = devm_kmalloc_array(dev, n_keys, sizeof(*buttonmap), > + GFP_KERNEL); > + if (!buttonmap) > + return -ENOMEM; > + > + error = device_property_read_u32_array(dev, buttons_property, > + buttonmap, n_keys); > + if (error) { > + dev_err(dev, "failed to parse '%s' property: %d\n", > + buttons_property, error); > + return error; > + } > + > + data->t15_keymap = buttonmap; > + data->t15_num_keys = n_keys; > + } > + > return 0; > } > > -- > 2.39.2 >
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml index 3ec579d63570..c40799355ed7 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml @@ -14,6 +14,9 @@ description: | Atmel maXTouch touchscreen or touchpads such as the mXT244 and similar devices. +allOf: + - $ref: input.yaml# + properties: compatible: const: atmel,maxtouch @@ -60,6 +63,10 @@ properties: or experiment to determine which bit corresponds to which input. Use KEY_RESERVED for unused padding values. + linux,keycodes: + minItems: 1 + maxItems: 8 + atmel,wakeup-method: $ref: /schemas/types.yaml#/definitions/uint32 description: |
In some configurations the touch controller can support the touch keys. Document the linux,keycodes property that enables those keys and specifies the keycodes that should be used to report the key events. Signed-off-by: André Apitzsch <git@apitzsch.eu> --- .../devicetree/bindings/input/atmel,maxtouch.yaml | 7 +++++++ 1 file changed, 7 insertions(+) base-commit: 982818426a0ffaf93b0621826ed39a84be3d7d62