| Message ID | 20230317233623.3968172-1-robh@kernel.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: pinctrl: Drop unneeded quotes | expand |
On 18/03/2023 08.36, Rob Herring wrote: > Cleanup bindings dropping unneeded quotes. Once all these are fixed, > checking for this can be enabled in yamllint. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../bindings/pinctrl/actions,s500-pinctrl.yaml | 2 +- > .../bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/apple,pinctrl.yaml | 2 +- > .../bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 4 ++-- > .../bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 4 ++-- > .../bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 6 +++--- > .../bindings/pinctrl/brcm,bcm6318-pinctrl.yaml | 2 +- > .../bindings/pinctrl/brcm,bcm63268-pinctrl.yaml | 2 +- > .../bindings/pinctrl/brcm,bcm6328-pinctrl.yaml | 2 +- > .../bindings/pinctrl/brcm,bcm6358-pinctrl.yaml | 2 +- > .../bindings/pinctrl/brcm,bcm6362-pinctrl.yaml | 2 +- > .../bindings/pinctrl/brcm,bcm6368-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml | 2 +- > .../devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml | 2 +- > .../devicetree/bindings/pinctrl/cirrus,lochnagar.yaml | 2 +- > .../devicetree/bindings/pinctrl/cirrus,madera.yaml | 4 ++-- > .../devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml | 2 +- > .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml | 2 +- > .../bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/ingenic,pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/intel,lgm-io.yaml | 2 +- > .../bindings/pinctrl/marvell,ac5-pinctrl.yaml | 4 ++-- > .../bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml | 4 ++-- > .../bindings/pinctrl/mediatek,mt6779-pinctrl.yaml | 4 ++-- > .../bindings/pinctrl/mediatek,mt7622-pinctrl.yaml | 6 +++--- > .../bindings/pinctrl/mediatek,mt7986-pinctrl.yaml | 6 +++--- > .../bindings/pinctrl/mediatek,mt8183-pinctrl.yaml | 4 ++-- > .../bindings/pinctrl/mediatek,mt8188-pinctrl.yaml | 2 +- > .../bindings/pinctrl/mediatek,pinctrl-mt6795.yaml | 4 ++-- > .../bindings/pinctrl/mscc,ocelot-pinctrl.yaml | 6 +++--- > .../devicetree/bindings/pinctrl/pinctrl-mt8186.yaml | 2 +- > .../devicetree/bindings/pinctrl/pinctrl-mt8192.yaml | 4 ++-- > .../devicetree/bindings/pinctrl/pinctrl-mt8195.yaml | 4 ++-- > .../devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 4 ++-- > .../devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 4 ++-- > .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 2 +- > .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/qcom,tlmm-common.yaml | 2 +- > .../bindings/pinctrl/ralink,mt7620-pinctrl.yaml | 2 +- > .../bindings/pinctrl/ralink,mt7621-pinctrl.yaml | 2 +- > .../bindings/pinctrl/ralink,rt2880-pinctrl.yaml | 2 +- > .../bindings/pinctrl/ralink,rt305x-pinctrl.yaml | 2 +- > .../bindings/pinctrl/ralink,rt3883-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/renesas,pfc.yaml | 2 +- > .../bindings/pinctrl/renesas,rza1-ports.yaml | 2 +- > .../bindings/pinctrl/renesas,rza2-pinctrl.yaml | 2 +- > .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 2 +- > .../bindings/pinctrl/renesas,rzn1-pinctrl.yaml | 2 +- > .../bindings/pinctrl/renesas,rzv2m-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/rockchip,pinctrl.yaml | 10 +++++----- > .../devicetree/bindings/pinctrl/samsung,pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/semtech,sx1501q.yaml | 6 +++--- > .../bindings/pinctrl/socionext,uniphier-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml | 10 +++++----- > .../bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 6 +++--- > .../bindings/pinctrl/sunplus,sp7021-pinctrl.yaml | 6 +++--- > .../bindings/pinctrl/toshiba,visconti-pinctrl.yaml | 8 ++++---- > .../devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml | 2 +- > 60 files changed, 97 insertions(+), 97 deletions(-) > For apple: Acked-by: Hector Martin <marcan@marcan.st> > diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml > index fb0f69ce9c16..7cb8a747feee 100644 > --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml > @@ -185,7 +185,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml > index 1e3c8de6cae1..467016cbb037 100644 > --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml > @@ -142,7 +142,7 @@ allOf: > # boards are defining it at the moment so it would generate a lot of > # warnings. > > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > - if: > not: > properties: > diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > index d3b11351ca45..9b4e0ae61ffe 100644 > --- a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml > @@ -73,7 +73,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml > index f4f1ee6b116e..bef85c25cdef 100644 > --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml > @@ -32,7 +32,7 @@ patternProperties: > then: > patternProperties: > "^function|groups$": > - $ref: "/schemas/types.yaml#/definitions/string" > + $ref: /schemas/types.yaml#/definitions/string > enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, > ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, > EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, > @@ -51,7 +51,7 @@ patternProperties: > VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml > index 8168f0088471..14c391f16899 100644 > --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml > @@ -44,7 +44,7 @@ patternProperties: > then: > patternProperties: > "^function|groups$": > - $ref: "/schemas/types.yaml#/definitions/string" > + $ref: /schemas/types.yaml#/definitions/string > enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, > ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, > ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, > @@ -65,7 +65,7 @@ patternProperties: > VGAVS, VPI24, VPO, WDTRST1, WDTRST2] > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml > index 62424c42c981..859a1889dc1e 100644 > --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml > @@ -30,7 +30,7 @@ patternProperties: > then: > properties: > function: > - $ref: "/schemas/types.yaml#/definitions/string" > + $ref: /schemas/types.yaml#/definitions/string > enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, > ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, > FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, > @@ -55,7 +55,7 @@ patternProperties: > USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] > > groups: > - $ref: "/schemas/types.yaml#/definitions/string" > + $ref: /schemas/types.yaml#/definitions/string > enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, > ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, > EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, > @@ -84,7 +84,7 @@ patternProperties: > WDTRST3, WDTRST4] > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml > index ab019a1998e8..4478a76171f7 100644 > --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml > @@ -38,7 +38,7 @@ patternProperties: > gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ] > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml > index 8c9d4668c8c4..73e1caa7c011 100644 > --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml > @@ -42,7 +42,7 @@ patternProperties: > vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml > index a8e22ec02215..2750ba42aeb8 100644 > --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml > @@ -37,7 +37,7 @@ patternProperties: > usb_port1 ] > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml > index 35867355a47a..2f6c540498bc 100644 > --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml > @@ -35,7 +35,7 @@ patternProperties: > led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml > index b584d4b27223..b3044f805753 100644 > --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml > @@ -42,7 +42,7 @@ patternProperties: > gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml > index 229323d9237d..3236871827df 100644 > --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml > @@ -43,7 +43,7 @@ patternProperties: > gpio31, uart1_grp ] > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml > index 8d1e5b1cdd5f..0a39dd26ee1a 100644 > --- a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml > @@ -53,7 +53,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > - if: > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml > index a78cb2796001..7f4f36a58e56 100644 > --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml > @@ -144,7 +144,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml > index 5cd512b7d5ba..5e000b3fadde 100644 > --- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml > @@ -173,7 +173,7 @@ properties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml > index 6bd42e43cdab..bb61a30321a1 100644 > --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml > @@ -40,8 +40,8 @@ properties: > '-pins$': > type: object > allOf: > - - $ref: "pincfg-node.yaml#" > - - $ref: "pinmux-node.yaml#" > + - $ref: pincfg-node.yaml# > + - $ref: pinmux-node.yaml# > properties: > groups: > description: > diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml > index 915cbbcc3555..222d57541b65 100644 > --- a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml > @@ -109,7 +109,7 @@ required: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > examples: > - | > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml > index 621038662188..7bd723ab1281 100644 > --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml > @@ -68,7 +68,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml > index 7ae084397258..6068be11dfe2 100644 > --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml > @@ -65,7 +65,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml > index 693398d88223..7dcf681271d3 100644 > --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml > @@ -57,7 +57,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml > index 66baa6082a4f..2f2405102996 100644 > --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml > @@ -14,7 +14,7 @@ description: > for common binding part and usage. > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml > index a4397930e0e8..35723966b70a 100644 > --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml > @@ -119,7 +119,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml > index ca0fef6e535e..1144ca2896e3 100644 > --- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml > @@ -48,7 +48,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml > index 491f67e7cc4f..afea9424c7e1 100644 > --- a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml > @@ -28,7 +28,7 @@ patternProperties: > > properties: > marvell,function: > - $ref: "/schemas/types.yaml#/definitions/string" > + $ref: /schemas/types.yaml#/definitions/string > description: > Indicates the function to select. > enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio, > @@ -47,7 +47,7 @@ patternProperties: > mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ] > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml > index a55c8e4ff26e..b903126bb9be 100644 > --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml > @@ -67,7 +67,7 @@ required: > - "#gpio-cells" > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > patternProperties: > 'pins$': > @@ -83,7 +83,7 @@ patternProperties: > pins it needs, and how they should be configured, with regard to muxer > configuration, pullups, drive strength, input enable/disable and input > schmitt. > - $ref: "/schemas/pinctrl/pincfg-node.yaml" > + $ref: /schemas/pinctrl/pincfg-node.yaml > > properties: > pinmux: > diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml > index a2141eb0854e..9bb563cea1a8 100644 > --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml > @@ -58,7 +58,7 @@ required: > - "#gpio-cells" > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > - if: > properties: > compatible: > @@ -123,7 +123,7 @@ patternProperties: > pinctrl groups available on the machine. Each subnode will list the > pins it needs, and how they should be configured, with regard to muxer > configuration, pullups, drive strength, input enable/disable and input schmitt. > - $ref: "/schemas/pinctrl/pincfg-node.yaml" > + $ref: /schemas/pinctrl/pincfg-node.yaml > > properties: > pinmux: > diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml > index ac93eb8f01a6..37f8666e258b 100644 > --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml > @@ -43,7 +43,7 @@ properties: > const: 2 > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > @@ -70,7 +70,7 @@ patternProperties: > additionalProperties: false > description: | > pinmux configuration nodes. > - $ref: "/schemas/pinctrl/pinmux-node.yaml" > + $ref: /schemas/pinctrl/pinmux-node.yaml > properties: > function: > description: | > @@ -249,7 +249,7 @@ patternProperties: > additionalProperties: false > description: | > pinconf configuration nodes. > - $ref: "/schemas/pinctrl/pincfg-node.yaml" > + $ref: /schemas/pinctrl/pincfg-node.yaml > > properties: > groups: > diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml > index 216b356cd519..275ed99f78d2 100644 > --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml > @@ -57,7 +57,7 @@ properties: > const: 2 > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > @@ -126,7 +126,7 @@ patternProperties: > "wf_dbdc" "wifi" 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, > 84, 85 > > - $ref: "/schemas/pinctrl/pinmux-node.yaml" > + $ref: /schemas/pinctrl/pinmux-node.yaml > properties: > function: > description: | > @@ -260,7 +260,7 @@ patternProperties: > additionalProperties: false > description: | > pinconf configuration nodes. > - $ref: "/schemas/pinctrl/pincfg-node.yaml" > + $ref: /schemas/pinctrl/pincfg-node.yaml > > properties: > pins: > diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml > index c30cd0d010dd..5f7d3113a83a 100644 > --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml > @@ -57,7 +57,7 @@ properties: > const: 2 > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > @@ -80,7 +80,7 @@ patternProperties: > pins it needs, and how they should be configured, with regard to muxer > configuration, pullups, drive strength, input enable/disable and input > schmitt. > - $ref: "/schemas/pinctrl/pincfg-node.yaml" > + $ref: /schemas/pinctrl/pincfg-node.yaml > > properties: > pinmux: > diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml > index 7e750f1e643d..941d38752431 100644 > --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml > @@ -73,7 +73,7 @@ patternProperties: > patternProperties: > '^pins': > type: object > - $ref: "/schemas/pinctrl/pincfg-node.yaml" > + $ref: /schemas/pinctrl/pincfg-node.yaml > additionalProperties: false > description: | > A pinctrl node should contain at least one subnode representing the > diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml > index 9399e0215526..50f0d5b59e12 100644 > --- a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml > @@ -82,7 +82,7 @@ patternProperties: > } > }; > }; > - $ref: "pinmux-node.yaml" > + $ref: pinmux-node.yaml > > properties: > pinmux: > @@ -155,7 +155,7 @@ patternProperties: > - pinmux > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml > index 98d547c34ef3..dbb3e1bd58c1 100644 > --- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml > @@ -54,8 +54,8 @@ patternProperties: > '-pins$': > type: object > allOf: > - - $ref: "pinmux-node.yaml" > - - $ref: "pincfg-node.yaml" > + - $ref: pinmux-node.yaml > + - $ref: pincfg-node.yaml > > properties: > function: true > @@ -78,7 +78,7 @@ required: > - gpio-ranges > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > - if: > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml > index 26573a793b57..d5175001b6f0 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml > @@ -94,7 +94,7 @@ patternProperties: > } > }; > }; > - $ref: "pinmux-node.yaml" > + $ref: pinmux-node.yaml > > properties: > pinmux: > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml > index a09ebbfec574..3fd20f07bf0f 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml > @@ -65,7 +65,7 @@ patternProperties: > pins it needs, and how they should be configured, with regard to muxer > configuration, pullups, drive strength, input enable/disable and > input schmitt. > - $ref: "pinmux-node.yaml" > + $ref: pinmux-node.yaml > > properties: > pinmux: > @@ -125,7 +125,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml > index 66fe17e9e4d3..a8703a5c386b 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml > @@ -87,7 +87,7 @@ patternProperties: > } > }; > }; > - $ref: "pinmux-node.yaml" > + $ref: pinmux-node.yaml > > properties: > pinmux: > @@ -217,7 +217,7 @@ patternProperties: > - pinmux > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml > index db505fdeac86..1096655961f7 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml > @@ -395,8 +395,8 @@ $defs: > qcom-pmic-gpio-state: > type: object > allOf: > - - $ref: "pinmux-node.yaml" > - - $ref: "pincfg-node.yaml" > + - $ref: pinmux-node.yaml > + - $ref: pincfg-node.yaml > properties: > pins: > description: > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml > index 9412b9362328..c91d3e3a094b 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml > @@ -82,8 +82,8 @@ $defs: > qcom-pmic-mpp-state: > type: object > allOf: > - - $ref: "pinmux-node.yaml" > - - $ref: "pincfg-node.yaml" > + - $ref: pinmux-node.yaml > + - $ref: pincfg-node.yaml > properties: > pins: > description: > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml > index e51feb4c0700..fa51fa9536f7 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml > @@ -50,7 +50,7 @@ $defs: > description: > Pinctrl node's client devices use subnodes for desired pin configuration. > Client device subnodes use below standard properties. > - $ref: "/schemas/pinctrl/pincfg-node.yaml" > + $ref: /schemas/pinctrl/pincfg-node.yaml > > properties: > pins: > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml > index de9d8854c690..4b4be7efc150 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml > @@ -55,7 +55,7 @@ $defs: > description: > Pinctrl node's client devices use subnodes for desired pin configuration. > Client device subnodes use below standard properties. > - $ref: "/schemas/pinctrl/pincfg-node.yaml" > + $ref: /schemas/pinctrl/pincfg-node.yaml > > properties: > pins: > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml > index cb5ba1bd6f8d..2da1437358b7 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml > @@ -52,7 +52,7 @@ properties: > information. > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - interrupts > diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml > index 1e63ea34146a..19d741c09cb2 100644 > --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml > @@ -637,7 +637,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml > index 1b1d37b981d9..39d04621b4f9 100644 > --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml > @@ -241,7 +241,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml > index 7fd0df880a76..7fb42ba9a7c1 100644 > --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml > @@ -121,7 +121,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml > index 4d66ca752a30..02780dcc38f2 100644 > --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml > @@ -254,7 +254,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml > index 008d93181aea..ec5b38415dcd 100644 > --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml > @@ -241,7 +241,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml > index 4fc758fea7e6..0fc3c0f52c19 100644 > --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml > @@ -73,7 +73,7 @@ properties: > maxItems: 1 > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml > index 9083040c996a..83800fcf0ce4 100644 > --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml > @@ -32,7 +32,7 @@ properties: > maxItems: 1 > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml > index d761fddc2206..37173a64fed2 100644 > --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml > @@ -73,7 +73,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > index f081acb7ba04..9ce1a07fc015 100644 > --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > @@ -113,7 +113,7 @@ additionalProperties: > $ref: "#/additionalProperties/anyOf/0" > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml > index 70b1788ab594..f3b85b7eae31 100644 > --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml > @@ -32,7 +32,7 @@ properties: > The bus clock, sometimes described as pclk, for register accesses. > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml > index eac6245db7dc..03f084292d68 100644 > --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml > @@ -94,7 +94,7 @@ additionalProperties: > $ref: "#/additionalProperties/anyOf/0" > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml > index 45b767986a87..10c335efe619 100644 > --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml > @@ -50,12 +50,12 @@ properties: > - rockchip,rv1126-pinctrl > > rockchip,grf: > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > description: > The phandle of the syscon node for the GRF registers. > > rockchip,pmu: > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > description: > The phandle of the syscon node for the PMU registers, > as some SoCs carry parts of the iomux controller registers there. > @@ -71,7 +71,7 @@ properties: > ranges: true > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > @@ -81,7 +81,7 @@ patternProperties: > "gpio@[0-9a-f]+$": > type: object > > - $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#" > + $ref: /schemas/gpio/rockchip,gpio-bank.yaml# > deprecated: true > > unevaluatedProperties: false > @@ -117,7 +117,7 @@ additionalProperties: > type: object > properties: > rockchip,pins: > - $ref: "/schemas/types.yaml#/definitions/uint32-matrix" > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > minItems: 1 > items: > items: > diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml > index eb2b2692607d..26614621774a 100644 > --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml > @@ -117,7 +117,7 @@ required: > - reg > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > - if: > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml > index 0719c03d6f4b..4214d7311f6b 100644 > --- a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml > @@ -62,8 +62,8 @@ patternProperties: > - pins > > allOf: > - - $ref: "pincfg-node.yaml#" > - - $ref: "pinmux-node.yaml#" > + - $ref: pincfg-node.yaml# > + - $ref: pinmux-node.yaml# > - if: > properties: > pins: > @@ -86,7 +86,7 @@ required: > - gpio-controller > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > - if: > not: > properties: > diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml > index bc34e2c872bc..a6f34df82e90 100644 > --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml > @@ -61,7 +61,7 @@ additionalProperties: > unevaluatedProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml > index eeb29b4ad4d1..1ab0f8dde477 100644 > --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml > @@ -44,7 +44,7 @@ properties: > > st,syscfg: > description: Phandle+args to the syscon node which includes IRQ mux selection. > - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + $ref: /schemas/types.yaml#/definitions/phandle-array > items: > - items: > - description: syscon node which includes IRQ mux selection > @@ -89,7 +89,7 @@ patternProperties: > st,bank-name: > description: > Should be a name string for this bank as specified in the datasheet. > - $ref: "/schemas/types.yaml#/definitions/string" > + $ref: /schemas/types.yaml#/definitions/string > enum: > - GPIOA > - GPIOB > @@ -108,7 +108,7 @@ patternProperties: > description: > Should correspond to the EXTI IOport selection (EXTI line used > to select GPIOs as interrupts). > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > minimum: 0 > maximum: 11 > > @@ -140,7 +140,7 @@ patternProperties: > configuration, pullups, drive, output high/low and output speed. > properties: > pinmux: > - $ref: "/schemas/types.yaml#/definitions/uint32-array" > + $ref: /schemas/types.yaml#/definitions/uint32-array > description: | > Integer array, represents gpio pin number and mux setting. > Supported pin number and mux varies for different SoCs, and are > @@ -201,7 +201,7 @@ patternProperties: > - pinmux > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml > index 69c0dd9998ea..27eff891685b 100644 > --- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml > @@ -111,7 +111,7 @@ patternProperties: > pins it needs, and how they should be configured, with regard to > muxer configuration, bias, input enable/disable, input schmitt > trigger enable/disable, slew-rate and drive strength. > - $ref: "/schemas/pinctrl/pincfg-node.yaml" > + $ref: /schemas/pinctrl/pincfg-node.yaml > > properties: > pins: > @@ -120,14 +120,14 @@ patternProperties: > This should be set using either the PAD_GPIO or PAD_FUNC_SHARE > macros. > Either this or "pinmux" has to be specified, but not both. > - $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pins" > + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins > > pinmux: > description: | > The list of GPIOs and their mux settings that properties in the > node apply to. This should be set using the GPIOMUX macro. > Either this or "pins" has to be specified, but not both. > - $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pinmux" > + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux > > bias-disable: true > > diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml > index 347061eece9e..94b868c7ceb1 100644 > --- a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml > @@ -138,7 +138,7 @@ patternProperties: > description: | > Define pin-function which is used by pinctrl node's client device. > The name should be one of string in the following enumeration. > - $ref: "/schemas/types.yaml#/definitions/string" > + $ref: /schemas/types.yaml#/definitions/string > enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD, > UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ] > > @@ -146,7 +146,7 @@ patternProperties: > description: | > Define pin-group in a specified pin-function. > The name should be one of string in the following enumeration. > - $ref: "/schemas/types.yaml#/definitions/string" > + $ref: /schemas/types.yaml#/definitions/string > enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2, > SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1, > HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ] > @@ -289,7 +289,7 @@ required: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > examples: > - | > diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml > index 98b4663f9766..19d47fd414bc 100644 > --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml > @@ -21,7 +21,7 @@ properties: > maxItems: 1 > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible > @@ -35,14 +35,14 @@ patternProperties: > pinctrl groups available on the machine. Each subnode will list the > pins it needs, and how they should be configured, with regard to muxer > configuration, pullups, drive strength. > - $ref: "pinmux-node.yaml" > + $ref: pinmux-node.yaml > additionalProperties: false > > properties: > function: > description: > Function to mux. > - $ref: "/schemas/types.yaml#/definitions/string" > + $ref: /schemas/types.yaml#/definitions/string > enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, > spi0, spi1, spi2, spi3, spi4, spi5, spi6, > uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] > @@ -50,7 +50,7 @@ patternProperties: > groups: > description: > Name of the pin group to use for the functions. > - $ref: "/schemas/types.yaml#/definitions/string" > + $ref: /schemas/types.yaml#/definitions/string > enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, > i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, > spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, > diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml > index cfd0cc549a7b..598a042850b8 100644 > --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml > @@ -168,7 +168,7 @@ patternProperties: > additionalProperties: false > > allOf: > - - $ref: "pinctrl.yaml#" > + - $ref: pinctrl.yaml# > > required: > - compatible - Hector
On 18/03/2023 00:36, Rob Herring wrote: > Cleanup bindings dropping unneeded quotes. Once all these are fixed, > checking for this can be enabled in yamllint. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On 3/18/23 08:36, Rob Herring wrote: > Cleanup bindings dropping unneeded quotes. Once all these are fixed, > checking for this can be enabled in yamllint. > > Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
On Sat, Mar 18, 2023 at 12:36 AM Rob Herring <robh@kernel.org> wrote: > Cleanup bindings dropping unneeded quotes. Once all these are fixed, > checking for this can be enabled in yamllint. > > Signed-off-by: Rob Herring <robh@kernel.org> Should I queue this patch by the way, or do you need it to go into some DT-related tree? Yours, Linus Walleij
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml index fb0f69ce9c16..7cb8a747feee 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml @@ -185,7 +185,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index 1e3c8de6cae1..467016cbb037 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -142,7 +142,7 @@ allOf: # boards are defining it at the moment so it would generate a lot of # warnings. - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: not: properties: diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml index d3b11351ca45..9b4e0ae61ffe 100644 --- a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml @@ -73,7 +73,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index f4f1ee6b116e..bef85c25cdef 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -32,7 +32,7 @@ patternProperties: then: patternProperties: "^function|groups$": - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, @@ -51,7 +51,7 @@ patternProperties: VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 8168f0088471..14c391f16899 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -44,7 +44,7 @@ patternProperties: then: patternProperties: "^function|groups$": - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, @@ -65,7 +65,7 @@ patternProperties: VGAVS, VPI24, VPO, WDTRST1, WDTRST2] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 62424c42c981..859a1889dc1e 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -30,7 +30,7 @@ patternProperties: then: properties: function: - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, @@ -55,7 +55,7 @@ patternProperties: USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] groups: - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, @@ -84,7 +84,7 @@ patternProperties: WDTRST3, WDTRST4] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml index ab019a1998e8..4478a76171f7 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml @@ -38,7 +38,7 @@ patternProperties: gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml index 8c9d4668c8c4..73e1caa7c011 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml @@ -42,7 +42,7 @@ patternProperties: vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml index a8e22ec02215..2750ba42aeb8 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml @@ -37,7 +37,7 @@ patternProperties: usb_port1 ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml index 35867355a47a..2f6c540498bc 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml @@ -35,7 +35,7 @@ patternProperties: led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml index b584d4b27223..b3044f805753 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml @@ -42,7 +42,7 @@ patternProperties: gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml index 229323d9237d..3236871827df 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml @@ -43,7 +43,7 @@ patternProperties: gpio31, uart1_grp ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml index 8d1e5b1cdd5f..0a39dd26ee1a 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml @@ -53,7 +53,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index a78cb2796001..7f4f36a58e56 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -144,7 +144,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml index 5cd512b7d5ba..5e000b3fadde 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml @@ -173,7 +173,7 @@ properties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml index 6bd42e43cdab..bb61a30321a1 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml @@ -40,8 +40,8 @@ properties: '-pins$': type: object allOf: - - $ref: "pincfg-node.yaml#" - - $ref: "pinmux-node.yaml#" + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# properties: groups: description: diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml index 915cbbcc3555..222d57541b65 100644 --- a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml @@ -109,7 +109,7 @@ required: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml index 621038662188..7bd723ab1281 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml @@ -68,7 +68,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml index 7ae084397258..6068be11dfe2 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml @@ -65,7 +65,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml index 693398d88223..7dcf681271d3 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml @@ -57,7 +57,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml index 66baa6082a4f..2f2405102996 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml @@ -14,7 +14,7 @@ description: for common binding part and usage. allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml index a4397930e0e8..35723966b70a 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -119,7 +119,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml index ca0fef6e535e..1144ca2896e3 100644 --- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml @@ -48,7 +48,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml index 491f67e7cc4f..afea9424c7e1 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml @@ -28,7 +28,7 @@ patternProperties: properties: marvell,function: - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string description: Indicates the function to select. enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio, @@ -47,7 +47,7 @@ patternProperties: mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml index a55c8e4ff26e..b903126bb9be 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml @@ -67,7 +67,7 @@ required: - "#gpio-cells" allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# patternProperties: 'pins$': @@ -83,7 +83,7 @@ patternProperties: pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive strength, input enable/disable and input schmitt. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pinmux: diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index a2141eb0854e..9bb563cea1a8 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -58,7 +58,7 @@ required: - "#gpio-cells" allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: properties: compatible: @@ -123,7 +123,7 @@ patternProperties: pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive strength, input enable/disable and input schmitt. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pinmux: diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml index ac93eb8f01a6..37f8666e258b 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml @@ -43,7 +43,7 @@ properties: const: 2 allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible @@ -70,7 +70,7 @@ patternProperties: additionalProperties: false description: | pinmux configuration nodes. - $ref: "/schemas/pinctrl/pinmux-node.yaml" + $ref: /schemas/pinctrl/pinmux-node.yaml properties: function: description: | @@ -249,7 +249,7 @@ patternProperties: additionalProperties: false description: | pinconf configuration nodes. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: groups: diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml index 216b356cd519..275ed99f78d2 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -57,7 +57,7 @@ properties: const: 2 allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible @@ -126,7 +126,7 @@ patternProperties: "wf_dbdc" "wifi" 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85 - $ref: "/schemas/pinctrl/pinmux-node.yaml" + $ref: /schemas/pinctrl/pinmux-node.yaml properties: function: description: | @@ -260,7 +260,7 @@ patternProperties: additionalProperties: false description: | pinconf configuration nodes. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pins: diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml index c30cd0d010dd..5f7d3113a83a 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml @@ -57,7 +57,7 @@ properties: const: 2 allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible @@ -80,7 +80,7 @@ patternProperties: pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive strength, input enable/disable and input schmitt. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pinmux: diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml index 7e750f1e643d..941d38752431 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml @@ -73,7 +73,7 @@ patternProperties: patternProperties: '^pins': type: object - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml additionalProperties: false description: | A pinctrl node should contain at least one subnode representing the diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml index 9399e0215526..50f0d5b59e12 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml @@ -82,7 +82,7 @@ patternProperties: } }; }; - $ref: "pinmux-node.yaml" + $ref: pinmux-node.yaml properties: pinmux: @@ -155,7 +155,7 @@ patternProperties: - pinmux allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml index 98d547c34ef3..dbb3e1bd58c1 100644 --- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml @@ -54,8 +54,8 @@ patternProperties: '-pins$': type: object allOf: - - $ref: "pinmux-node.yaml" - - $ref: "pincfg-node.yaml" + - $ref: pinmux-node.yaml + - $ref: pincfg-node.yaml properties: function: true @@ -78,7 +78,7 @@ required: - gpio-ranges allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml index 26573a793b57..d5175001b6f0 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml @@ -94,7 +94,7 @@ patternProperties: } }; }; - $ref: "pinmux-node.yaml" + $ref: pinmux-node.yaml properties: pinmux: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml index a09ebbfec574..3fd20f07bf0f 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -65,7 +65,7 @@ patternProperties: pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive strength, input enable/disable and input schmitt. - $ref: "pinmux-node.yaml" + $ref: pinmux-node.yaml properties: pinmux: @@ -125,7 +125,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml index 66fe17e9e4d3..a8703a5c386b 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml @@ -87,7 +87,7 @@ patternProperties: } }; }; - $ref: "pinmux-node.yaml" + $ref: pinmux-node.yaml properties: pinmux: @@ -217,7 +217,7 @@ patternProperties: - pinmux allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index db505fdeac86..1096655961f7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -395,8 +395,8 @@ $defs: qcom-pmic-gpio-state: type: object allOf: - - $ref: "pinmux-node.yaml" - - $ref: "pincfg-node.yaml" + - $ref: pinmux-node.yaml + - $ref: pincfg-node.yaml properties: pins: description: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index 9412b9362328..c91d3e3a094b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -82,8 +82,8 @@ $defs: qcom-pmic-mpp-state: type: object allOf: - - $ref: "pinmux-node.yaml" - - $ref: "pincfg-node.yaml" + - $ref: pinmux-node.yaml + - $ref: pincfg-node.yaml properties: pins: description: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index e51feb4c0700..fa51fa9536f7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -50,7 +50,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pins: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml index de9d8854c690..4b4be7efc150 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -55,7 +55,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pins: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml index cb5ba1bd6f8d..2da1437358b7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml @@ -52,7 +52,7 @@ properties: information. allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - interrupts diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml index 1e63ea34146a..19d741c09cb2 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml @@ -637,7 +637,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml index 1b1d37b981d9..39d04621b4f9 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml @@ -241,7 +241,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml index 7fd0df880a76..7fb42ba9a7c1 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml @@ -121,7 +121,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml index 4d66ca752a30..02780dcc38f2 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml @@ -254,7 +254,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml index 008d93181aea..ec5b38415dcd 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml @@ -241,7 +241,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml index 4fc758fea7e6..0fc3c0f52c19 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml @@ -73,7 +73,7 @@ properties: maxItems: 1 allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml index 9083040c996a..83800fcf0ce4 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml @@ -32,7 +32,7 @@ properties: maxItems: 1 allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml index d761fddc2206..37173a64fed2 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -73,7 +73,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index f081acb7ba04..9ce1a07fc015 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -113,7 +113,7 @@ additionalProperties: $ref: "#/additionalProperties/anyOf/0" allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml index 70b1788ab594..f3b85b7eae31 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml @@ -32,7 +32,7 @@ properties: The bus clock, sometimes described as pclk, for register accesses. allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml index eac6245db7dc..03f084292d68 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -94,7 +94,7 @@ additionalProperties: $ref: "#/additionalProperties/anyOf/0" allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index 45b767986a87..10c335efe619 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -50,12 +50,12 @@ properties: - rockchip,rv1126-pinctrl rockchip,grf: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the syscon node for the GRF registers. rockchip,pmu: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the syscon node for the PMU registers, as some SoCs carry parts of the iomux controller registers there. @@ -71,7 +71,7 @@ properties: ranges: true allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible @@ -81,7 +81,7 @@ patternProperties: "gpio@[0-9a-f]+$": type: object - $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#" + $ref: /schemas/gpio/rockchip,gpio-bank.yaml# deprecated: true unevaluatedProperties: false @@ -117,7 +117,7 @@ additionalProperties: type: object properties: rockchip,pins: - $ref: "/schemas/types.yaml#/definitions/uint32-matrix" + $ref: /schemas/types.yaml#/definitions/uint32-matrix minItems: 1 items: items: diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml index eb2b2692607d..26614621774a 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml @@ -117,7 +117,7 @@ required: - reg allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml index 0719c03d6f4b..4214d7311f6b 100644 --- a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml +++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml @@ -62,8 +62,8 @@ patternProperties: - pins allOf: - - $ref: "pincfg-node.yaml#" - - $ref: "pinmux-node.yaml#" + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# - if: properties: pins: @@ -86,7 +86,7 @@ required: - gpio-controller allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: not: properties: diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml index bc34e2c872bc..a6f34df82e90 100644 --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -61,7 +61,7 @@ additionalProperties: unevaluatedProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index eeb29b4ad4d1..1ab0f8dde477 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -44,7 +44,7 @@ properties: st,syscfg: description: Phandle+args to the syscon node which includes IRQ mux selection. - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: syscon node which includes IRQ mux selection @@ -89,7 +89,7 @@ patternProperties: st,bank-name: description: Should be a name string for this bank as specified in the datasheet. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: - GPIOA - GPIOB @@ -108,7 +108,7 @@ patternProperties: description: Should correspond to the EXTI IOport selection (EXTI line used to select GPIOs as interrupts). - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 11 @@ -140,7 +140,7 @@ patternProperties: configuration, pullups, drive, output high/low and output speed. properties: pinmux: - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are @@ -201,7 +201,7 @@ patternProperties: - pinmux allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml index 69c0dd9998ea..27eff891685b 100644 --- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml @@ -111,7 +111,7 @@ patternProperties: pins it needs, and how they should be configured, with regard to muxer configuration, bias, input enable/disable, input schmitt trigger enable/disable, slew-rate and drive strength. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pins: @@ -120,14 +120,14 @@ patternProperties: This should be set using either the PAD_GPIO or PAD_FUNC_SHARE macros. Either this or "pinmux" has to be specified, but not both. - $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pins" + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins pinmux: description: | The list of GPIOs and their mux settings that properties in the node apply to. This should be set using the GPIOMUX macro. Either this or "pins" has to be specified, but not both. - $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pinmux" + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux bias-disable: true diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml index 347061eece9e..94b868c7ceb1 100644 --- a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml @@ -138,7 +138,7 @@ patternProperties: description: | Define pin-function which is used by pinctrl node's client device. The name should be one of string in the following enumeration. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ] @@ -146,7 +146,7 @@ patternProperties: description: | Define pin-group in a specified pin-function. The name should be one of string in the following enumeration. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2, SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1, HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ] @@ -289,7 +289,7 @@ required: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml index 98b4663f9766..19d47fd414bc 100644 --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -21,7 +21,7 @@ properties: maxItems: 1 allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible @@ -35,14 +35,14 @@ patternProperties: pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive strength. - $ref: "pinmux-node.yaml" + $ref: pinmux-node.yaml additionalProperties: false properties: function: description: Function to mux. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, spi0, spi1, spi2, spi3, spi4, spi5, spi6, uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] @@ -50,7 +50,7 @@ patternProperties: groups: description: Name of the pin group to use for the functions. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml index cfd0cc549a7b..598a042850b8 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml @@ -168,7 +168,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/pinctrl/actions,s500-pinctrl.yaml | 2 +- .../bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/apple,pinctrl.yaml | 2 +- .../bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 4 ++-- .../bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 4 ++-- .../bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 6 +++--- .../bindings/pinctrl/brcm,bcm6318-pinctrl.yaml | 2 +- .../bindings/pinctrl/brcm,bcm63268-pinctrl.yaml | 2 +- .../bindings/pinctrl/brcm,bcm6328-pinctrl.yaml | 2 +- .../bindings/pinctrl/brcm,bcm6358-pinctrl.yaml | 2 +- .../bindings/pinctrl/brcm,bcm6362-pinctrl.yaml | 2 +- .../bindings/pinctrl/brcm,bcm6368-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml | 2 +- .../devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml | 2 +- .../devicetree/bindings/pinctrl/cirrus,lochnagar.yaml | 2 +- .../devicetree/bindings/pinctrl/cirrus,madera.yaml | 4 ++-- .../devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml | 2 +- .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml | 2 +- .../bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/ingenic,pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/intel,lgm-io.yaml | 2 +- .../bindings/pinctrl/marvell,ac5-pinctrl.yaml | 4 ++-- .../bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml | 4 ++-- .../bindings/pinctrl/mediatek,mt6779-pinctrl.yaml | 4 ++-- .../bindings/pinctrl/mediatek,mt7622-pinctrl.yaml | 6 +++--- .../bindings/pinctrl/mediatek,mt7986-pinctrl.yaml | 6 +++--- .../bindings/pinctrl/mediatek,mt8183-pinctrl.yaml | 4 ++-- .../bindings/pinctrl/mediatek,mt8188-pinctrl.yaml | 2 +- .../bindings/pinctrl/mediatek,pinctrl-mt6795.yaml | 4 ++-- .../bindings/pinctrl/mscc,ocelot-pinctrl.yaml | 6 +++--- .../devicetree/bindings/pinctrl/pinctrl-mt8186.yaml | 2 +- .../devicetree/bindings/pinctrl/pinctrl-mt8192.yaml | 4 ++-- .../devicetree/bindings/pinctrl/pinctrl-mt8195.yaml | 4 ++-- .../devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 4 ++-- .../devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 4 ++-- .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 2 +- .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/qcom,tlmm-common.yaml | 2 +- .../bindings/pinctrl/ralink,mt7620-pinctrl.yaml | 2 +- .../bindings/pinctrl/ralink,mt7621-pinctrl.yaml | 2 +- .../bindings/pinctrl/ralink,rt2880-pinctrl.yaml | 2 +- .../bindings/pinctrl/ralink,rt305x-pinctrl.yaml | 2 +- .../bindings/pinctrl/ralink,rt3883-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/renesas,pfc.yaml | 2 +- .../bindings/pinctrl/renesas,rza1-ports.yaml | 2 +- .../bindings/pinctrl/renesas,rza2-pinctrl.yaml | 2 +- .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 2 +- .../bindings/pinctrl/renesas,rzn1-pinctrl.yaml | 2 +- .../bindings/pinctrl/renesas,rzv2m-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/rockchip,pinctrl.yaml | 10 +++++----- .../devicetree/bindings/pinctrl/samsung,pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/semtech,sx1501q.yaml | 6 +++--- .../bindings/pinctrl/socionext,uniphier-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml | 10 +++++----- .../bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 6 +++--- .../bindings/pinctrl/sunplus,sp7021-pinctrl.yaml | 6 +++--- .../bindings/pinctrl/toshiba,visconti-pinctrl.yaml | 8 ++++---- .../devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml | 2 +- 60 files changed, 97 insertions(+), 97 deletions(-)