diff mbox series

ARM: dts: stm32: fix typo in stm32mp15xx-dkx.dtsi

Message ID 20230407193253.1.If11ffa6edfdfef0869478412ec3cec3169483cb9@changeid
State Superseded
Headers show
Series ARM: dts: stm32: fix typo in stm32mp15xx-dkx.dtsi | expand

Commit Message

Patrick DELAUNAY April 7, 2023, 5:33 p.m. UTC
Remove unnecessary space in device tree stm32mp15xx-dkx.dtsi.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Krzysztof Kozlowski April 8, 2023, 2:57 p.m. UTC | #1
On 07/04/2023 19:33, Patrick Delaunay wrote:
> Remove unnecessary space in device tree stm32mp15xx-dkx.dtsi.

Your commit subject says typo. Where is it?

> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
>  arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
> index 11370ae0d868..ccd6c4722bd3 100644
> --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
> @@ -382,21 +382,21 @@ vref_ddr: vref_ddr {
>  				regulator-always-on;
>  			};
>  
> -			 bst_out: boost {
> +			bst_out: boost {
>  				regulator-name = "bst_out";
>  				interrupts = <IT_OCP_BOOST 0>;
> -			 };
> +			};
>  
>  			vbus_otg: pwr_sw1 {
>  				regulator-name = "vbus_otg";
>  				interrupts = <IT_OCP_OTG 0>;
> -			 };
> +			};
>  
> -			 vbus_sw: pwr_sw2 {
> +			vbus_sw: pwr_sw2 {
>  				regulator-name = "vbus_sw";
>  				interrupts = <IT_OCP_SWOUT 0>;
>  				regulator-active-discharge = <1>;
> -			 };
> +			};
>  		};
>  
>  		onkey {

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 11370ae0d868..ccd6c4722bd3 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -382,21 +382,21 @@  vref_ddr: vref_ddr {
 				regulator-always-on;
 			};
 
-			 bst_out: boost {
+			bst_out: boost {
 				regulator-name = "bst_out";
 				interrupts = <IT_OCP_BOOST 0>;
-			 };
+			};
 
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-			 };
+			};
 
-			 vbus_sw: pwr_sw2 {
+			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
 				regulator-active-discharge = <1>;
-			 };
+			};
 		};
 
 		onkey {