mbox series

[V4,0/5] Add regulator support for IPQ9574 SoC

Message ID 20230407155727.20615-1-quic_devipriy@quicinc.com
Headers show
Series Add regulator support for IPQ9574 SoC | expand

Message

Devi Priya April 7, 2023, 3:57 p.m. UTC 
IPQ9574 SoC uses the PMIC MP5496 and SMPA1 regulator for APSS voltage scaling.
This patch series adds support for the same and also enables the RPM 
communication over the RPMSG framework.

DTS patch depends on the below series
https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@quicinc.com/

[V4]:
	- Detailed change logs are added to the respective patches
[V3]:
	https://lore.kernel.org/linux-arm-msm/20230406070032.22243-1-quic_devipriy@quicinc.com/
	- Dropped PATCH [1/6] dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible
	  as it is available in linux-next/master
	- Dropped PATCH [4/6] regulator: qcom_smd: Add support to define the bootup voltage
	  and updated the nominal voltage in the Board DT as discussed
	- Splitted the board DT changes to a separate patch as suggested
	- Detailed change logs are added to the respective patches
[V2]:
	https://lore.kernel.org/linux-arm-msm/20230217142030.16012-1-quic_devipriy@quicinc.com/
	- Reordered the patches to have the bindings and driver changes
	  in place before the device tree support
	- Dropped the 'soc: qcom: smd-rpm: Add IPQ9574 compatible' since
	  it is already part of the linux-next/master
	- Detailed change log is added to the respective patches
[V1]:
	https://lore.kernel.org/linux-arm-msm/20230113150310.29709-1-quic_devipriy@quicinc.com/

Devi Priya (5):
  regulator: qcom_smd: Add s1 sub-node to mp5496 regulator
  regulator: qcom_smd: Add MP5496 S1 regulator
  arm64: dts: qcom: ipq9574: Add RPM related nodes
  arm64: dts: qcom: ipq9574: Add SMPA1 regulator node
  arm64: dts: qcom: ipq9574: Add cpufreq support

 .../regulator/qcom,smd-rpm-regulator.yaml     |  2 +-
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts   | 19 +++++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi         | 75 +++++++++++++++++++
 drivers/regulator/qcom_smd-regulator.c        |  5 +-
 4 files changed, 98 insertions(+), 3 deletions(-)

Comments

Mark Brown April 11, 2023, 2:40 p.m. UTC | #1 
On Fri, 07 Apr 2023 21:27:22 +0530, Devi Priya wrote:
> IPQ9574 SoC uses the PMIC MP5496 and SMPA1 regulator for APSS voltage scaling.
> This patch series adds support for the same and also enables the RPM
> communication over the RPMSG framework.
> 
> DTS patch depends on the below series
> https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@quicinc.com/
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/5] regulator: qcom_smd: Add s1 sub-node to mp5496 regulator
      commit: e953450cf0f622e3249202e985c79d3faf9a58f2
[2/5] regulator: qcom_smd: Add MP5496 S1 regulator
      commit: 60bbee7db43b97bf8c0978cc91f78d1746351871

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark