| Message ID | 20230414-pmi632-v1-2-fe94dc414832@z3ntu.xyz |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3 | expand |
On 14.04.2023 01:17, Luca Weiss wrote: > Add support for the 8 GPIOs found on PMI632. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- As I've started doing more and more lately, I'll hijack this patch to discuss the general approach.. I have a feeling that you'll get some comments about this match list growing, especially since the driver data is already filled in dt (gpio-ranges).. perhaps we can improve this.. Especially considering the "qcom,spmi-gpio" fallback is there (unless we care about 2015 DTs like 0804308fdd3c) that are unlikely to still work nowadays. Old DTs also used interrupts=<> to list out all the GPIOs (among the other SPMI fluff) individually (see e.g. 5f540fb4821a). Krzysztof, WDYT? Would it be worth taking all of that old junk into account, or should we keep it as-is? Konrad > drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > index ea3485344f06..40cab13e5a83 100644 > --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > @@ -1232,6 +1232,7 @@ static const struct of_device_id pmic_gpio_of_match[] = { > { .compatible = "qcom,pm8994-gpio", .data = (void *) 22 }, > { .compatible = "qcom,pm8998-gpio", .data = (void *) 26 }, > { .compatible = "qcom,pma8084-gpio", .data = (void *) 22 }, > + { .compatible = "qcom,pmi632-gpio", .data = (void *) 8 }, > { .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 }, > { .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 }, > { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 }, >
On Fri, Apr 14, 2023 at 1:18 AM Luca Weiss <luca@z3ntu.xyz> wrote: > Add support for the 8 GPIOs found on PMI632. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> This patch (2/8) applied as uncontroversial. Yours, Linus Walleij
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index ea3485344f06..40cab13e5a83 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1232,6 +1232,7 @@ static const struct of_device_id pmic_gpio_of_match[] = { { .compatible = "qcom,pm8994-gpio", .data = (void *) 22 }, { .compatible = "qcom,pm8998-gpio", .data = (void *) 26 }, { .compatible = "qcom,pma8084-gpio", .data = (void *) 22 }, + { .compatible = "qcom,pmi632-gpio", .data = (void *) 8 }, { .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 }, { .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 }, { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
Add support for the 8 GPIOs found on PMI632. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + 1 file changed, 1 insertion(+)