| Message ID | 20230509-msm8226-mmcc-parents-v1-1-83a2dfc986ab@z3ntu.xyz |
|---|---|
| State | Accepted |
| Commit | e280427384269fba93c7ec0373afe87bc39d7945 |
| Headers | show |
| Series | Provide parent clocks to msm8226 mmcc | expand |
On 9.05.2023 23:16, Luca Weiss wrote: > The xo clock being used everywhere actually goes via the RPM. Since the > rpmcc driver recently got support for this clock we can use this now. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm/boot/dts/qcom-msm8226.dtsi | 11 ++++++----- > 1 file changed, 6 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi > index 42acb9ddb8cc..4dd4e26c73a2 100644 > --- a/arch/arm/boot/dts/qcom-msm8226.dtsi > +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi > @@ -176,7 +176,7 @@ sdhc_1: mmc@f9824900 { > interrupt-names = "hc_irq", "pwr_irq"; > clocks = <&gcc GCC_SDCC1_AHB_CLK>, > <&gcc GCC_SDCC1_APPS_CLK>, > - <&xo_board>; > + <&rpmcc RPM_SMD_XO_CLK_SRC>; > clock-names = "iface", "core", "xo"; > pinctrl-names = "default"; > pinctrl-0 = <&sdhc1_default_state>; > @@ -192,7 +192,7 @@ sdhc_2: mmc@f98a4900 { > interrupt-names = "hc_irq", "pwr_irq"; > clocks = <&gcc GCC_SDCC2_AHB_CLK>, > <&gcc GCC_SDCC2_APPS_CLK>, > - <&xo_board>; > + <&rpmcc RPM_SMD_XO_CLK_SRC>; > clock-names = "iface", "core", "xo"; > pinctrl-names = "default"; > pinctrl-0 = <&sdhc2_default_state>; > @@ -208,7 +208,7 @@ sdhc_3: mmc@f9864900 { > interrupt-names = "hc_irq", "pwr_irq"; > clocks = <&gcc GCC_SDCC3_AHB_CLK>, > <&gcc GCC_SDCC3_APPS_CLK>, > - <&xo_board>; > + <&rpmcc RPM_SMD_XO_CLK_SRC>; > clock-names = "iface", "core", "xo"; > pinctrl-names = "default"; > pinctrl-0 = <&sdhc3_default_state>; > @@ -362,7 +362,8 @@ usb_hs_phy: phy { > compatible = "qcom,usb-hs-phy-msm8226", > "qcom,usb-hs-phy"; > #phy-cells = <0>; > - clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; > + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, > + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; > clock-names = "ref", "sleep"; > resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; > reset-names = "phy", "por"; > @@ -617,7 +618,7 @@ adsp: remoteproc@fe200000 { > power-domains = <&rpmpd MSM8226_VDDCX>; > power-domain-names = "cx"; > > - clocks = <&xo_board>; > + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; > clock-names = "xo"; > > memory-region = <&adsp_region>; >
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 42acb9ddb8cc..4dd4e26c73a2 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -176,7 +176,7 @@ sdhc_1: mmc@f9824900 { interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; pinctrl-names = "default"; pinctrl-0 = <&sdhc1_default_state>; @@ -192,7 +192,7 @@ sdhc_2: mmc@f98a4900 { interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; pinctrl-names = "default"; pinctrl-0 = <&sdhc2_default_state>; @@ -208,7 +208,7 @@ sdhc_3: mmc@f9864900 { interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC3_AHB_CLK>, <&gcc GCC_SDCC3_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; pinctrl-names = "default"; pinctrl-0 = <&sdhc3_default_state>; @@ -362,7 +362,8 @@ usb_hs_phy: phy { compatible = "qcom,usb-hs-phy-msm8226", "qcom,usb-hs-phy"; #phy-cells = <0>; - clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; clock-names = "ref", "sleep"; resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; reset-names = "phy", "por"; @@ -617,7 +618,7 @@ adsp: remoteproc@fe200000 { power-domains = <&rpmpd MSM8226_VDDCX>; power-domain-names = "cx"; - clocks = <&xo_board>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "xo"; memory-region = <&adsp_region>;
The xo clock being used everywhere actually goes via the RPM. Since the rpmcc driver recently got support for this clock we can use this now. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- arch/arm/boot/dts/qcom-msm8226.dtsi | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)