mbox series

[v5,0/6] phy: cadence: salvo: some fixes and workarounds

Message ID 20230517161646.3418250-1-Frank.Li@nxp.com
Headers show
Series phy: cadence: salvo: some fixes and workarounds | expand

Message

Frank Li May 17, 2023, 4:16 p.m. UTC 
Sorry I have not realized some patches were missed at upstream kernel.
Version number continue with previous
https://lore.kernel.org/imx/ZGOCT0Mdg3Jtar6c@matsya/T/#t

Peter's Fixes:
- Bist issue
- fix corrupt package from devices when start transferring less than 20us
- fix the FSM in controller seeing the disconnection at L1 use case.

Change from v4 to v5
- Add sign off at Patch 3
- Single line to set reg5
- correct .set_mode logic

Change from v3 to v4:
- Added missed dependent patches.

Change from v2 to v3:
- add cdns prefix
Change from v1 to v2
- remove empty change before #include 
- Remove dts change from patch
- fixed dt-binding-check warning


Frank Li (2):
  phy: cadence: salvo: Add cdns,usb2-disconnect-threshold-microvolt
    property
  dt-bindings: phy: cdns,salvo: add property
    cdns,usb2-disconnect-threshold-microvolt

Peter Chen (4):
  phy: cadence: salvo: add access for USB2PHY
  phy: cadence: salvo: decrease delay value to zero for txvalid
  phy: cadence: salvo: add bist fix
  phy: cadence: salvo: add .set_mode API

 .../bindings/phy/cdns,salvo-phy.yaml          |  6 ++
 drivers/phy/cadence/phy-cadence-salvo.c       | 95 +++++++++++++++++--
 2 files changed, 93 insertions(+), 8 deletions(-)

Comments

Vinod Koul May 19, 2023, 5:44 p.m. UTC | #1 
On 17-05-23, 12:16, Frank Li wrote:
> 
> Sorry I have not realized some patches were missed at upstream kernel.
> Version number continue with previous
> https://lore.kernel.org/imx/ZGOCT0Mdg3Jtar6c@matsya/T/#t
> 
> Peter's Fixes:
> - Bist issue
> - fix corrupt package from devices when start transferring less than 20us
> - fix the FSM in controller seeing the disconnection at L1 use case.

Applied, thanks