mbox series

[V5,0/3] Add regulator support for IPQ9574 SoC

Message ID 20230517172527.1968-1-quic_devipriy@quicinc.com
Headers show
Series Add regulator support for IPQ9574 SoC | expand

Message

Devi Priya May 17, 2023, 5:25 p.m. UTC 
IPQ9574 SoC uses the PMIC MP5496 and SMPA1 regulator for APSS voltage scaling.
This patch series adds support for the same and also enables the RPM 
communication over the RPMSG framework.

DTS patch depends on the below series which applies cleanly on top of [1]
https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@quicinc.com/

[1] https://lore.kernel.org/linux-arm-msm/20230515150722.12196-1-quic_anusha@quicinc.com/

[V5]: 
	- Dropped the below patches as they are already part of linux-next/master
		[1/5] regulator: qcom_smd: Add s1 sub-node to mp5496 regulator
		[2/5] regulator: qcom_smd: Add MP5496 S1 regulator

	- Rebased on the below series
	https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@quicinc.com/

[V4]:
	https://lore.kernel.org/linux-arm-msm/20230407155727.20615-1-quic_devipriy@quicinc.com/
	- Detailed change logs are added to the respective patches
[V3]:
	https://lore.kernel.org/linux-arm-msm/20230406070032.22243-1-quic_devipriy@quicinc.com/
	- Dropped PATCH [1/6] dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible
	  as it is available in linux-next/master
	- Dropped PATCH [4/6] regulator: qcom_smd: Add support to define the bootup voltage
	  and updated the nominal voltage in the Board DT as discussed
	- Splitted the board DT changes to a separate patch as suggested
	- Detailed change logs are added to the respective patches
[V2]:
	https://lore.kernel.org/linux-arm-msm/20230217142030.16012-1-quic_devipriy@quicinc.com/
	- Reordered the patches to have the bindings and driver changes
	  in place before the device tree support
	- Dropped the 'soc: qcom: smd-rpm: Add IPQ9574 compatible' since
	  it is already part of the linux-next/master
	- Detailed change log is added to the respective patches
[V1]:
	https://lore.kernel.org/linux-arm-msm/20230113150310.29709-1-quic_devipriy@quicinc.com/

Devi Priya (3):
  arm64: dts: qcom: ipq9574: Add RPM related nodes
  arm64: dts: qcom: ipq9574: Add SMPA1 regulator node
  arm64: dts: qcom: ipq9574: Add cpufreq support

 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 19 +++++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 77 ++++++++++++++++++++-
 2 files changed, 95 insertions(+), 1 deletion(-)

Comments

Bjorn Andersson May 26, 2023, 7:38 p.m. UTC | #1 
On Wed, 17 May 2023 22:55:24 +0530, Devi Priya wrote:
> IPQ9574 SoC uses the PMIC MP5496 and SMPA1 regulator for APSS voltage scaling.
> This patch series adds support for the same and also enables the RPM
> communication over the RPMSG framework.
> 
> DTS patch depends on the below series which applies cleanly on top of [1]
> https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@quicinc.com/
> 
> [...]

Applied, thanks!

[1/3] arm64: dts: qcom: ipq9574: Add RPM related nodes
      commit: 8cc864a4375dd62023a2880050bf618a225cb907
[2/3] arm64: dts: qcom: ipq9574: Add SMPA1 regulator node
      commit: 56ba2b3aeb4b76549a7759e79bd44330cd9b885a
[3/3] arm64: dts: qcom: ipq9574: Add cpufreq support
      commit: 8f0ae6bc0098f63a008820f80c08b01ea2167da3

Best regards,